Megatest

	     ;; if the test is not found then clearly the waiton is not met...
	     ;; (if (not ever-seen)(set! result (cons waitontest-name result)))))
	     (if (not ever-seen)
		 (set! result (append (if (null? tests)(list waitontest-name) tests) result)))))
	 waitons)
	(delete-duplicates result))))

(define (db:teststep-set-status! db test-id teststep-name state-in status-in comment logfile)
  (debug:print 4 "test-id: " test-id " teststep-name: " teststep-name)
  (let* ((tdb       (db:open-test-db-by-test-id db test-id))
	 (state     (check-valid-items "state" state-in))
	 (status    (check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 0 "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))

						   ;;       (set! script (conc script "source " prev-env))))
						   
						   ;; call the command using mt_ezstep
						   (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))

						   (debug:print 4 "script: " script)

						   (open-run-close db:teststep-set-status! #f test-id stepname "start" "-" #f #f)
						   ;; now launch
						   (let ((pid (process-run script)))
						     (let processloop ((i 0))
						       (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
								   (mutex-lock! m)
								   (vector-set! exit-info 0 pid)
								   (vector-set! exit-info 1 exit-status)
								   (vector-set! exit-info 2 exit-code)
								   (mutex-unlock! m)
								   (if (eq? pid-val 0)
								       (begin
									 (thread-sleep! 2)
									 (processloop (+ i 1))))
								   ))
                                                     (let ((exinfo (vector-ref exit-info 2))
                                                           (logfna (if logpro-used (conc stepname ".html") "")))
						       ;; testing if procedures called in a remote call cause problems (ans: no or so I suspect)
						       (open-run-close db:teststep-set-status! #f test-id stepname "end" exinfo #f logfna))
						     (if logpro-used
							 (open-run-close db:test-set-log! #f test-id (conc stepname ".html")))
						     ;; set the test final status
						     (let* ((this-step-status (cond
									       ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
									       ((eq? (vector-ref exit-info 2) 0)                   'pass)
									       (else 'fail)))

    ;; if the test is iterated it is necessary to create the parent path
    ;; to the iteration. use pathname-directory to trim the path by one
    ;; level
    (if (not not-iterated) ;; i.e. iterated
	(let ((iterated-parent  (pathname-directory (conc lnkpath "/" item-path))))
	  (debug:print 2 "INFO: Creating iterated parent " iterated-parent)
	  (create-directory iterated-parent #t)))

    (if (symbolic-link? lnkpath) (delete-file lnkpath))
    (if (not (or (file-exists? lnkpath)
		 (symbolic-link? lnkpath)))
	(create-symbolic-link toptest-path lnkpath))
    
    ;; The toptest path has been created, the link to the test in the linktree has
    ;; been created. Now, if this is an iterated test the real test dir must be created
    (if (not not-iterated) ;; this is an iterated test
	(let ((lnktarget (conc lnkpath "/" item-path)))
	  (debug:print 2 "Setting up sub test run area")
	  (debug:print 2 " - creating run area in " test-path)
	  (create-directory test-path #t) ;; (system  (conc "mkdir -p " test-path))
	  (debug:print 2 
		       " - creating link from: " test-path "\n"
		       "                   to: " lnktarget)
	  ;; (create-directory lnkpath #t) ;; (system  (conc "mkdir -p " lnkpath))

	  ;; If there is already a symlink delete it and recreate it.
	  (if (symbolic-link? lnktarget)     (delete-file lnktarget))
	  (if (not (file-exists? lnktarget)) (create-symbolic-link test-path lnktarget))))

    ;; I suspect this section was deleting test directories under some 
    ;; wierd sitations? This doesn't make sense - reenabling the rm -f 
    ;; I honestly don't remember *why* this chunk was needed...
    ;; (let ((testlink (conc lnkpath "/" testname)))
    ;;   (if (and (file-exists? testlink)
    ;;            (or (regular-file? testlink)

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (args:get-arg "-runall")
    (general-run-call 
     "-runall"
     "run all tests"
     (lambda (target runname keys keynames keyvallst)




	 (runs:run-tests target
			 runname
			 (args:get-arg "-runtests")
			 user
			 args:arg-hash)))) ;; )

;;======================================================================

	       (logfile  (args:get-arg "-setlog")))
	  (change-directory testpath)
	  (if (not (setup-for-run))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))
	  (if (and state status)
	      (open-run-close db:teststep-set-status! db test-id step state status (args:get-arg "-m") logfile)
	      (begin
		(debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
		(exit 6)))
	  (if db (sqlite3:finalize! db))
	  (set! *didsomething* #t))))

(if (or (args:get-arg "-setlog")       ;; since setting up is so costly lets piggyback on -test-status

				       ((tcsh csh ksh)    ">&")
				       ((zsh bash sh ash) "2>&1 >")
				       (else ">&")))
			 (fullcmd    (conc "(" (string-intersperse 
						(cons cmd params) " ")
					   ") " redir " " logfile)))
		    ;; mark the start of the test
		    (open-run-close db:teststep-set-status! db test-id stepname "start" "n/a" (args:get-arg "-m") logfile)
		    ;; run the test step
		    (debug:print 2 "INFO: Running \"" fullcmd "\"")
		    (change-directory startingdir)
		    (set! exitstat (system fullcmd)) ;; cmd params))
		    (set! *globalexitstatus* exitstat)
		    (change-directory testpath)
		    ;; run logpro if applicable ;; (process-run "ls" (list "/foo" "2>&1" "blah.log"))
		    (if logprofile
			(let* ((htmllogfile (conc stepname ".html"))
			       (oldexitstat exitstat)
			       (cmd         (string-intersperse (list "logpro" logprofile htmllogfile "<" logfile ">" (conc stepname "_logpro.log")) " ")))
			  (debug:print 2 "INFO: running \"" cmd "\"")
			  (change-directory startingdir)
			  (set! exitstat (system cmd))
			  (set! *globalexitstatus* exitstat) ;; no necessary
			  (change-directory testpath)
			  (open-run-close db:test-set-log! db test-id htmllogfile)))
		    (let ((msg (args:get-arg "-m")))
		      (open-run-close db:teststep-set-status! db test-id stepname "end" exitstat msg logfile))
		    )))
	  (if (or (args:get-arg "-test-status")
		  (args:get-arg "-set-values"))
	      (let ((newstatus (cond
				((number? status)       (if (equal? status 0) "PASS" "FAIL"))
				((and (string? status)
				      (string->number status))(if (equal? (string->number status) 0) "PASS" "FAIL"))

(if (args:get-arg "-repl")
    (let* ((toppath (setup-for-run))
	   (db      (if toppath (open-db) #f)))
      (if db
	  (begin
	    (set! *db* db)
	    (if (not (args:get-arg "-server"))
		(server:client-setup))
	    (import readline)
	    (import apropos)
	    (gnu-history-install-file-manager
	     (string-append
	      (or (get-environment-variable "HOME") ".") "/.megatest_history"))
	    (current-input-port (make-gnu-readline-port "megatest> "))
	    (repl)))

		  (loop (car remtests)(cdr remtests)))))))

    (if (not (null? required-tests))
	(debug:print 1 "INFO: Adding " required-tests " to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print 4 "INFO: test-records=" (hash-table->alist test-records))
    (runs:run-tests-queue run-id runname test-records keyvallst flags)


    (debug:print 4 "INFO: All done by here")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))
		 (equal? (db:test-get-state test) "COMPLETED")
		 (not (member (db:test-get-status test)
			      '("PASS" "WARN" "CHECK" "WAIVED")))))
	  prereqs-not-met))

(define (runs:calc-not-completed prereqs-not-met)
  (filter
   (lambda (t)
     (or (not (vector? t))
	 (not (equal? "COMPLETED" (db:test-get-state t)))))
   prereqs-not-met))

(define (runs:pretty-string lst)
  (map (lambda (t)
	 (if (not (vector? t))
	     (conc t)
	     (conc (db:test-get-testname t) ":" (db:test-get-state t) "/" (db:test-get-status t))))
       lst))

(define (runs:make-full-test-name testname itempath)
  (if (equal? itempath "") testname (conc testname "/" itempath)))

;; test-records is a hash table testname:item_path => vector < testname testconfig waitons priority items-info ... >
(define (runs:run-tests-queue run-id runname test-records keyvallst flags)
    ;; At this point the list of parent tests is expanded 
    ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", keyvallst: " keyvallst " flags: " (hash-table->alist flags))
  (let ((sorted-test-names (tests:sort-by-priority-and-waiton test-records))
	(item-patts        (hash-table-ref/default flags "-itempatt" #f))
	(test-registery    (make-hash-table))
	(num-retries        0)
	(max-retries       (config-lookup *configdat* "setup" "maxretries")))
    (set! max-retries (if (and max-retries (string->number max-retries))(string->number max-retries) 100))
    (if (not (null? sorted-test-names))
	(let loop ((hed         (car sorted-test-names))
		   (tal         (cdr sorted-test-names))
		   (reruns      '()))
	  (if (not (null? reruns))(debug:print 4 "INFO: reruns=" reruns))
	  ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
	  (let* ((test-record (hash-table-ref test-records hed))
		 (test-name   (tests:testqueue-get-testname test-record))
		 (tconfig     (tests:testqueue-get-testconfig test-record))
		 (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
				(if m (string->symbol m) 'normal)))
		 (waitons     (tests:testqueue-get-waitons    test-record))
		 (priority    (tests:testqueue-get-priority   test-record))
		 (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
		 (items       (tests:testqueue-get-items      test-record))
		 (item-path   (item-list->path itemdat))
		 (newtal      (append tal (list hed))))



















	    
	    (debug:print 6
			 "test-name: " test-name
			 "\n  hed:         " hed
			 "\n  itemdat:     " itemdat
			 "\n  items:       " items
			 "\n  item-path:   " item-path
			 "\n  waitons:     " waitons
			 "\n  num-retries: " num-retries
			 "\n  tal:         " tal
			 "\n  reruns:      " reruns)

	    ;; check for hed in waitons => this would be circular, remove it and issue an
	    ;; error
	    (if (member test-name waitons)
		(begin
		  (debug:print 0 "ERROR: test " test-name " has listed itself as a waiton, please correct this!")
		  (set! waiton (filter (lambda (x)(not (equal? x hed))) waitons))))

	    (cond ;; OUTER COND
	     ((not items) ;; when false the test is ok to be handed off to launch (but not before)
	      (let* ((have-resources  (open-run-close runs:can-run-more-tests #f test-record)) ;; look at the test jobgroup and tot jobs running
		     (prereqs-not-met (open-run-close db:get-prereqs-not-met #f run-id waitons item-path mode: testmode))
		     (fails           (runs:calc-fails prereqs-not-met))
		     (non-completed   (runs:calc-not-completed prereqs-not-met)))
		(debug:print 8 "INFO: have-resources: " have-resources " prereqs-not-met: " 
			     (string-intersperse 
			      (map (lambda (t)
				     (if (vector? t)
					 (conc (db:test-get-state t) "/" (db:test-get-status t))
					 (conc " WARNING: t is not a vector=" t )))
				   prereqs-not-met) ", ") " fails: " fails)
		(debug:print 4 "INFO: hed=" hed)

		;; Don't know at this time if the test have been launched at some time in the past
		;; i.e. is this a re-launch?

		(cond ;; INNER COND #1 for a launchable test
		 ;; Check item path against item-patts
		 ((and (not (patt-list-match item-path item-patts))
		       (not (equal? item-path "")))
		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print 1 "INFO: Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " item-patts)
		  (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 ((not (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f))
		  (open-run-close db:tests-register-test #f run-id test-name item-path)
		  (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) #t)
		  (thread-sleep! *global-delta*)
		  (loop (car newtal)(cdr newtal) reruns))
		 ((not have-resources) ;; simply try again after waiting a second
		  (thread-sleep! (+ 1 *global-delta*))
		  (debug:print 1 "INFO: no resources to run new tests, waiting ...")
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
		  (loop (car newtal)(cdr newtal) reruns))
		 ((and have-resources
		       (or (null? prereqs-not-met)
			   (and (eq? testmode 'toplevel)
				(null? non-completed))))
		  ;; no loop here, just drop though and use the loop at the bottom 
		  (run:test run-id runname keyvallst test-record flags #f)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 (else ;; must be we have unmet prerequisites
		    (debug:print 4 "FAILS: " fails)
		    ;; If one or more of the prereqs-not-met are FAIL then we can issue
		    ;; a message and drop hed from the items to be processed.
		    (if (null? fails)
			(begin
			  ;; couldn't run, take a breather

				(begin (debug:print 1 "WARN: Dropping test " (db:test-get-testname hed) "/" (db:test-get-item-path hed)
						    " from the launch list as it has prerequistes that are FAIL")
				       (thread-sleep! *global-delta*)
				       (loop (car tal)(cdr tal) (cons hed reruns)))
				(begin
				  (debug:print 1 "WARN: Test not processed correctly. Could be a race condition in your test implementation? " hed) ;;  " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
				  (thread-sleep! *global-delta*)
				  (loop hed tal reruns))))))))) ;; END OF INNER COND
	     
	     ;; case where an items came in as a list been processed
	     ((and (list? items)     ;; thus we know our items are already calculated
		   (not   itemdat)) ;; and not yet expanded into the list of things to be done
	      (if (and (>= *verbosity* 1)
		       (> (length items) 0)
		       (> (length (car items)) 0))
		  (pp items))




	      (for-each
	       (lambda (my-itemdat)
		 (let* ((new-test-record (let ((newrec (make-tests:testqueue)))
					   (vector-copy! test-record newrec)
					   newrec))
			(my-item-path (item-list->path my-itemdat)))
		   (if (patt-list-match my-item-path item-patts)           ;; yes, we want to process this item, NOTE: Should not need this check here!
		       (let ((newtestname (conc hed "/" my-item-path)))    ;; test names are unique on testname/item-path
			 (tests:testqueue-set-items!     new-test-record #f)
			 (tests:testqueue-set-itemdat!   new-test-record my-itemdat)
			 (tests:testqueue-set-item_path! new-test-record my-item-path)
			 (hash-table-set! test-records newtestname new-test-record)
			 (set! tal (cons newtestname tal)))))) ;; since these are itemized create new test names testname/itempath
	       items)
	      (if (not (null? tal))
		  (begin
		    (thread-sleep! *global-delta*)
		    (debug:print 4 "INFO: End of items list, looping with next")
		    (loop (car tal)(cdr tal) reruns))))

	     ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	     ;;    - but only do that if resources exist to kick off the job
	     ((or (procedure? items)(eq? items 'have-procedure))
	      (let ((can-run-more    (open-run-close runs:can-run-more-tests #f test-record)))
		(if can-run-more
		    (let* ((prereqs-not-met (open-run-close db:get-prereqs-not-met #f run-id waitons item-path mode: testmode))
			   (fails           (runs:calc-fails prereqs-not-met))
			   (non-completed   (runs:calc-not-completed prereqs-not-met)))
		      (debug:print 8 "INFO: can-run-more: " can-run-more
				   "\n testname:        " hed
				   "\n prereqs-not-met: " (runs:pretty-string prereqs-not-met)
				   "\n non-completed:   " (runs:pretty-string non-completed) 
				   "\n fails:           " (runs:pretty-string fails)
				   "\n testmode:        " testmode
				   "\n num-retries:     " num-retries
				   "\n (eq? testmode 'toplevel): " (eq? testmode 'toplevel)
				   "\n (null? non-completed):    " (null? non-completed)
				   "\n reruns: " reruns)

		      (cond ;; INNER COND #2
		       ((or (null? prereqs-not-met) ;; all prereqs met, fire off the test
			    ;; or, if it is a 'toplevel test and all prereqs not met are COMPLETED then launch
			    (and (eq? testmode 'toplevel)
				 (null? non-completed)))
			(let ((test-name (tests:testqueue-get-testname test-record)))
			  (setenv "MT_TEST_NAME" test-name) ;; 
			  (setenv "MT_RUNNAME"   runname)

				     ", removing it from to-do list")
			(if (not (null? tal))
			    (begin
			      (thread-sleep! *global-delta*)
			      (loop (car tal)(cdr tal)(cons hed reruns)))))
		       (else
			(debug:print 8 "ERROR: No handler for this condition.")





			(thread-sleep! *global-delta*)
			(loop (car newtal)(cdr newtal) reruns)))) ;; END OF IF CAN RUN MORE

		    ;; if can't run more just loop with next possible test
		    (begin
		      (debug:print 4 "INFO: processing the case with a lambda for items or 'have-procedure. Moving through the queue without dropping " hed)
		      (thread-sleep! (+ 1 *global-delta*))
		      (loop (car newtal)(cdr newtal) reruns))))) ;; END OF (or (procedure? items)(eq? items 'have-procedure))
	     
	     ;; this case should not happen, added to help catch any bugs
	     ((and (list? items) itemdat)
	      (debug:print 0 "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
	      (exit 1))


	     ((not (null? reruns))









	      (let* ((newlst (open-run-close tests:filter-non-runnable #f run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
		     (junked (lset-difference equal? tal newlst)))
		(debug:print 4 "INFO: full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
		(if (< num-retries max-retries)
		    (set! newlst (append reruns newlst)))
		(set! num-retries (+ num-retries 1))
		(thread-sleep! *global-delta*)
		(if (not (null? newlst))
		    ;; since reruns have been tacked on to newlst create new reruns from junked
		    (loop (car newlst)(cdr newlst)(delete-duplicates junked)))))
	     ((not (null? tal))
	      (debug:print 4 "INFO: I'm pretty sure I shouldn't get here."))
	     (else
	      (debug:print 4 "INFO: Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	     )))) ;; LET* ((test-record

    ;; we get here on "drop through" - loop for next test in queue
    ;; FIXME!!!! THIS SHOULD NOT REQUIRE AN EXIT!!!!!!!
    
    (debug:print 1 "INFO: All tests launched")
    (thread-sleep! 0.5)
    ;; FIXME! This harsh exit should not be necessary....
    ;; (if (not *runremote*)(exit)) ;; 
    #f)) ;; return a #f as a hint that we are done
  ;; Here we need to check that all the tests remaining to be run are eligible to run
  ;; and are not blocked by failed
  

;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
(define (run:test run-id runname keyvallst test-record flags parent-test)
  ;; All these vars might be referenced by the testconfig file reader
  (let* ((test-name    (tests:testqueue-get-testname   test-record))
	 (test-waitons (tests:testqueue-get-waitons    test-record))
	 (test-conf    (tests:testqueue-get-testconfig test-record))

# run some tests

BINPATH=$(shell realpath ../bin)
MEGATEST=$(BINPATH)/megatest
PATH := $(BINPATH):$(PATH)
RUNNAME := $(shell date +w%V.%u.%H.%M)
IPADDR := "-"
# Set SERVER to "-server -"
SERVER := 
DEBUG  := 1

all : test1 test2 test3 test4 test5

test1 : cleanprep
	rm -f simplerun/megatest.db
	mkdir -p simplelinks simpleruns
	cd simplerun;cp ../../*_records.scm .;perl -pi.bak -e 's/define-inline/define/' *_records.scm
	cd simplerun;echo '(load "../tests.scm")' | $(MEGATEST) -repl -debug $(DEBUG)

test2 : fullprep
	cd fullrun;$(MEGATEST) -runtests ez_pass -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_a $(SERVER)

test3 : fullprep
	cd fullrun;$(MEGATEST) -runtests runfirst -reqtarg ubuntu/nfs/none :runname $(RUNNAME)_b  $(SERVER) -debug 10

[fields]
SYSTEM TEXT
RELEASE TEXT

[setup]
# Adjust max_concurrent_jobs to limit how much you load your machines
max_concurrent_jobs 50

# This is your link path, you can move it but it is generally better to keep it stable
linktree #{getenv PWD}/../simplelinks

# Valid values for state and status for steps, NB// It is not recommended you use this
[validvalues]
state start end completed

# Job tools are more advanced ways to control how your jobs are launched
[jobtools]
useshell yes
launcher nbfind

# You can override environment variables for all your tests here
[env-override]
EXAMPLE_VAR example value

# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{getenv PWD}/../simpleruns

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh
step2 step2.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
# PARTOFDAY morning noon afternoon evening night

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo

(require-extension test)

(define test-work-dir (current-directory))

;; read in all the _record files
(let ((files (glob "*_records.scm")))
  (for-each
   (lambda (file)
     (print "Loading " file)
     (load file))
   files))

(define conffile #f)
(test "Read a config" #t (hash-table? (read-config "test.config" #f #f)))
(test "Read a config that doesn't exist" #t (hash-table? (read-config "nada.config" #f #f)))

(set! conffile (read-config "test.config" #f #f))
(test "Get available diskspace" #t (number? (get-df "./")))

                                      (and (file-exists? "nada.sh")
    			                 (file-exists? "nada.csh"))))

(test "get all legal tests" (list "test1" "test2") (sort (get-all-legal-tests) string<=?))

(test "register-test, test info" "NOT_STARTED"
      (begin
	(db:tests-register-test *db* 1 "nada" "")
	(vector-ref (db:get-test-info *db* 1 "nada" "") 3)))
(test #f "NOT_STARTED"    
      (begin
	(open-run-close db:tests-register-test #f 1 "nada" "")
	(vector-ref (open-run-close db:get-test-info #f 1 "nada" "") 3)))

(test "get-keys" "SYSTEM" (vector-ref (car (db:get-keys *db*)) 0));; (key:get-fieldname (car (sort (db-get-keys *db*)(lambda (a b)(string>=? (vector-ref a 0)(vector-ref b 0)))))))

(define remargs (args:get-args
		 '("bar" "foo" ":runname" "bob" ":sysname" "ubuntu" ":fsname" "nfs" ":datapath" "blah/foo" "nada")
		 (list ":runname" ":state" ":status")

(test #f #t (let ((db (open-test-db testdbpath)))
	      (set! *tdb* db)
	      (sqlite3#database? db)))
(sqlite3#finalize! *tdb*)

;; (test "Remove the rollup run" #t (begin (remove-runs) #t))

(set! *verbosity* 20)
(test "Run a test" #t (general-run-call 
		       "-runtests" 
		       "run a test"
		       (lambda (target runname keys keynames keyvallst)
			 (let ((test-patts "test1"))
			   (runs:run-tests target runname test-patts user (make-hash-table))
			   ))))

(change-directory test-work-dir)
(test "Add a step"  #t
      (begin
	(db:teststep-set-status! db 1 "step1" "start" 0 "This is a comment" "mylogfile.html")
	(sleep 2)
	(db:teststep-set-status! db 1 "step1" "end" "pass" "This is a different comment" "finallogfile.html")
	(set! test-id (db:test-get-id (car (db:get-tests-for-run db 1 "test1" "" '() '()))))
	(number? test-id)))

(test "Get nice table for steps" "2.0s"
      (begin
	(vector-ref (hash-table-ref (db:get-steps-table db test-id) "test1") 4)))

(hash-table-set! args:arg-hash ":runname" "rollup")

(test "Remove the rollup run" #t (begin (remove-runs) #t))
(test "Rollup the run(s)" #t (begin
			       (runs:rollup-run db keys)
			       #t))

;; ADD ME!!!! (db:get-prereqs-not-met *db* 1 '("runfirst") "" mode: 'normal)
;; ADD ME!!!! (rdb:get-tests-for-run *db* 1 "runfirst" #f '() '())