Megatest

# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

TODO
====




23WW45 - the revolution branch
. Add "fast" db start option (no handshaking over NFS)
. Add server-ro to server types (just "server" is fine for read/write).
. Create pause-server and resume-server calls
. Create rsync or cp sync to MTRAH function
. Change rmt:send-receive to divert calls to read-only server when possible
. Change start server to call main.db server for 1..N.db servers, block until server is read for use.

					    (ok      (equal? dbfname (dbr:dbstruct-dbfname dbstruct))))
				       (case cmd
					 ((ping) #t) ;; we are fine
					 (else
					  (assert ok "FATAL: database file and run-id not aligned.")))))
			     (ttdat   *server-info*)
			     (server-state (tt-state ttdat))
			     (maxthreads   10) ;; make this a parameter?
			     (status  (cond
				       ((and (> numthreads maxthreads)
					     (> (random 100) 70)) ;; allow a 30% probability to go through so we can figure out what is going wrong in main.db server.
					'busy)
				       ;; ((> numthreads 5) 'loaded) ;; this gets transmitted to the client which calls tt:backoff-incr to slow stuff down.
				       (else 'ok)))
			     (errmsg  (case status
					((busy)   (conc "Server overloaded, "numthreads" threads in flight"))
					((loaded) (conc "Server loaded, "numthreads" threads in flight"))
					(else     #f)))
			     (result  (case status
					((busy)
					 (if (eq? cmd 'ping)
					     (normal-proc cmd run-id params)
					     ;; numthreads must be greater than 5 for busy
					     (* 1 (- numthreads maxthreads)) ;; was 15
					     )) ;; (- numthreads 29)) ;; call back in as many seconds
					((loaded)
					 ;; 			    (if (eq? (rmt:transport-mode) 'tcp)
					 ;; 				(thread-sleep! 0.5))
					 (normal-proc cmd run-id params))
					(else
					 (normal-proc cmd run-id params))))

		   '()
		   db 
		   qry
		   run-id
		   (or last-update 0))))))

(define (db:get-testinfo-state-status dbstruct run-id test-id)
  (let ((res            #f))
    (db:with-db dbstruct run-id #f
		(lambda (dbdat db)


		  (sqlite3:for-each-row
		   (lambda (run-id testname item-path state status)
		     ;; id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (set! res (vector test-id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-")))
		   db 
		   "SELECT run_id,testname,item_path,state,status FROM tests WHERE id=? and run_id=?;" 

		   test-id run-id)))
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintest-get-{id ,run_id,testname ...}
;;
(define (db:get-tests-for-run-mindata dbstruct run-id testpatt states statuses not-in)
  (db:get-tests-for-run dbstruct run-id testpatt states statuses #f #f not-in #f #f "id,run_id,testname,state,status,event_time,item_path" 0 #f))

;; 
(define (db:get-test-state-status-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let ((res   (cons #f #f)))
;;	   (stmth (db:get-cache-stmth dbdat db "SELECT state,status FROM tests WHERE id=?;")))


       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (state status)
	  (cons state status))
	db
	"SELECT state,status FROM tests WHERE id=? AND run_id=?;" ;; stmth try not compiling this one - yes, this fixed the bind issue
	test-id run-id)
       res))))

;; Use db:test-get* to access
;; Get test data using test_ids. NB// Only works within a single run!!
;;
(define (db:get-test-info-by-ids dbstruct run-id test-ids)
  (db:with-db

                                 dbname TEXT,
                                 mtversion TEXT,
                                 reason TEXT DEFAULT 'none',
                                   CONSTRAINT no_sync_processes UNIQUE (host,pid));"
			    ))))))
	 (on-tmp      (equal? (car (string-split dbpath "/")) "tmp"))
	 (db        (if on-tmp
			(dbfile:cautious-open-database dbname init-proc 0 "WAL" force-init: #t)
			(dbfile:cautious-open-database dbname init-proc 0 #f    force-init: #t)

			;; (sqlite3:open-database dbname)
			)))
    (if on-tmp	      ;; done in cautious-open-database
	(begin
	  (sqlite3:execute db "PRAGMA synchronous = 0;")
	  (sqlite3:set-busy-handler! db (sqlite3:make-busy-timeout 136000))))
    db))

;; mtest processes registry calls

(define (dbfile:insert-or-update-process nsdb dat)
  (let* ((host      (procinf-host dat))

	 (result      (or stmth
			  (let* ((newstmth (sqlite3:prepare db stmt)))
			    ;; (db:hoh-set! stmt-cache db stmt newstmth)
			    (hash-table-set! stmt-cache stmt newstmth)
			    newstmth))))
    (mutex-unlock! *get-cache-stmth-mutex*)
    result))


)

    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)

    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
	       (disk-free (get-df (current-directory)))
               (last-sync (current-seconds)))
      ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - top of loop encountered at "(current-seconds)" with last-sync="last-sync))
      (let* ((over-time     (> (current-seconds) (+ last-sync update-period)))
             (new-cpu-load  (let* ((load  (alist-ref 'adj-core-load (common:get-normalized-cpu-load #f)))
                                   (delta (abs (- load cpu-load))))
                              (if (> delta 0.1) ;; don't bother updating with small changes
                                  load
                                  #f)))
             (new-disk-free (let* ((df    (if over-time ;; only get df every 30 seconds
                                              (get-df (current-directory))
                                              disk-free))
                                   (delta (abs (- df disk-free))))
                              (if (and (> df 0)
                                       (> (/ delta df) 0.1)) ;; (> delta 200) ;; ignore changes under 200 Meg
                                  df
                                  #f)))
             (do-sync       (or new-cpu-load new-disk-free over-time))

             (test-info   (rmt:get-test-state-status-by-id run-id test-id))
             (state       (car test-info));; (db:test-get-state test-info))
             (status      (cdr test-info));; (db:test-get-status test-info))

             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         ((test-get-kill-request run-id test-id)
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         ((equal? status "DEAD")
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)
        (if (common:low-noise-print 600 "run zombie") ;; every five minutes is plenty
	    (launch:handle-zombie-tests run-id))
        (when do-sync
          ;;(with-output-to-file (conc (getenv "MT_TEST_RUN_DIR") "/last-loadinfo.log" #:append)
          ;;  (lambda () (pp (list (current-seconds) new-cpu-load new-disk-free (calc-minutes)))))
          ;; (common:telemetry-log "zombie" (conc  "launch:monitor-job - dosync started at "(current-seconds)))
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - dosync finished at "(current-seconds)))
	  )
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second

		      (debug:print-error 0 *default-log-port* "Nothing to kill, pid1=" pid1 ", pid2=" pid2)
		      (tests:test-set-status! run-id test-id "KILLED"  "FAILED TO KILL" (conc (args:get-arg "-m")" "kill-reason) #f) ;; BB ADDED kill-reason -- confirm OK with Matt
		      )))
	      (mutex-unlock! m)
	      ;; no point in sticking around. Exit now. But run end of run before exiting?
              (launch:end-of-run-check run-id)
	      (exit)))
	(if (hash-table-ref/default misc-flags 'keep-going #f)
	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f))) ;; NOTE: Checking twice for keep-going is intentional


(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)

			    (> delay-wait 0))
		       (begin
			 (debug:print 0 *default-log-port* "Server is loaded, delaying "delay-wait" seconds")
			 (thread-sleep! delay-wait)))))
	     (case status
	       ((busy) ;; result will be how long the server wants you to delay
		(let* ((raw-dly  (if (number? result) result 0.1))
		       (dly      (* raw-dly (/ attemptnum 2))))
		  (debug:print 0 *default-log-port* "WARNING: server for "dbfname" is busy, cmd is "cmd", will try again in "dly" seconds. This is attempt "(- attemptnum 1))
		  (thread-sleep! dly)
		  (tt:handler  ttdat cmd run-id params (+ attemptnum 1) readonly-mode dbfname testsuite mtexe server-start-proc)))
	       ((loaded)
		(debug:print 0 *default-log-port* "WARNING: server for "dbfname" is loaded, slowing queries.")
		(tt:backoff-incr (tt-conn-host conn)(tt-conn-port conn))
		result) ;; (tt:handler  ttdat cmd run-id params (+ attemptnum 1) readonly-mode dbfname testsuite mtexe))

;;======================================================================
;; test steps
;;======================================================================

;; teststep-set-status! used to be here


(define (test-get-kill-request run-id test-id) ;; run-id test-name itemdat)
  (let* ((testdat   (rmt:get-test-state-status-by-id run-id test-id)))
    (and testdat
	 (equal? (car testdat) "KILLREQ"))))

(define (test:tdb-get-rundat-count tdb)
  (if tdb
      (let ((res 0))