;; use a global for setting the buttons colors
;; state status teststeps
(define *state-status* (vector #f #f #f))
(define (update-state-status-buttons testdat)
(let* ((state (db:test-get-state testdat))
(status (db:test-get-status testdat))
(color (get-color-for-state-status state status)))
(color (common:get-color-for-state-status state status)))
((vector-ref *state-status* 0) state color)
((vector-ref *state-status* 1) status color)))
;;======================================================================
;; Set fields
;;======================================================================
(define (set-fields-panel test-id testdat)
run-id test-name)
res))
;; Rollup the pass/fail counts from itemized tests into fail_count and pass_count
(define (db:roll-up-pass-fail-counts db run-id test-name item-path status)
;; (cdb:flush-queue *runremote*)
(if (and (not (equal? item-path ""))
(member status '("PASS" "WARN" "FAIL" "WAIVED" "RUNNING" "CHECK")))
(member status '("PASS" "WARN" "FAIL" "WAIVED" "RUNNING" "CHECK" "SKIP")))
(begin
(sqlite3:execute
db
"UPDATE tests
SET fail_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND status='FAIL'),
pass_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND (status='PASS' OR status='WARN' OR status='WAIVED'))
pass_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND status IN ('PASS','WARN','WAIVED'))
WHERE run_id=? AND testname=? AND item_path='';"
run-id test-name run-id test-name run-id test-name)
;; (thread-sleep! 0.1) ;; give other processes a chance here, no, better to be done ASAP?
(if (equal? status "RUNNING") ;; running takes priority over all other states, force the test state to RUNNING
(sqlite3:execute db "UPDATE tests SET state=? WHERE run_id=? AND testname=? AND item_path='';" "RUNNING" run-id test-name)
(sqlite3:execute
db
(cond
((< (db:step-get-event_time a)(db:step-get-event_time b)) #t)
((eq? (db:step-get-event_time a)(db:step-get-event_time b))
(< (db:step-get-id a) (db:step-get-id b)))
(else #f)))))
res)))
(define (db:get-compressed-steps test-id)
(let* ((comprsteps (open-run-close db:get-steps-table #f test-id)))
(map (lambda (x)
;; take advantage of the \n on time->string
(vector
(vector-ref x 0)
(let ((s (vector-ref x 1)))
(if (number? s)(seconds->time-string s) s))
(let ((s (vector-ref x 2)))
(if (number? s)(seconds->time-string s) s))
(vector-ref x 3) ;; status
(vector-ref x 4)
(vector-ref x 5))) ;; time delta
(sort (hash-table-values comprsteps)
(lambda (a b)
(let ((time-a (vector-ref a 1))
(time-b (vector-ref b 1)))
(if (and (number? time-a)(number? time-b))
(if (< time-a time-b)
#t
(if (eq? time-a time-b)
(string<? (conc (vector-ref a 2))
(conc (vector-ref b 2)))
#f))
(string<? (conc time-a)(conc time-b)))))))))
;;======================================================================
;; M I S C M A N A G E M E N T I T E M S
;;======================================================================
;; the new prereqs calculation, looks also at itempath if specified
;; all prereqs must be met:
;; if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;; if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;
;; Note: do not convert to remote as it calls remote under the hood
;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK or WAIVED)
;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK, SKIP or WAIVED)
;; mode 'toplevel means that tests must be COMPLETED only
;; mode 'itemmatch means that tests items must be COMPLETED and (PASS|WARN|WAIVED|CHECK) [[ NB// NOT IMPLEMENTED YET ]]
;;
(define (db:get-prereqs-not-met db run-id waitons ref-item-path #!key (mode 'normal))
(if (or (not waitons)
(null? waitons))
'()
megatest uses the network filesystem to call home to your master
sqlite3 database.
include::getting_started.txt[] include::writing_tests.txt[]
include::reference.txt[]
Controlled waiver propagation
=========================================================# logpro_file input_glob=============================
If test is FAIL and previous test in run with same MT_TARGET is WAIVED then apply the following rules from the testconfig:
If a waiver check is specified in the testconfig apply the check and if it passes then set this FAIL to WAIVED
Waiver check has two parts, 1) a list of waiver, rulename, filepatterns and 2) the rulename script spec (note that "diff" and "logpro" are predefined)
=========================================================
###### EXAMPLE FROM testconfig #########
# matching file(s) will be diff'd with previous run and logpro applied
# if PASS or WARN result from logpro then WAIVER state is set
#
[waivers]
# logpro_file rulename input_glob
waiver_1 logpro lookittmp.log
waiver_1 logpro lookittmp.log
[waiver_rules]
# This builtin rule is the default if there is no <waivername>.logpro file
# diff diff %file1% %file2%
# This builtin rule is applied if a <waivername>.logpro file exists
(begin
(print-error-message exn)
(if (< portnum 9000)
(begin
(print "WARNING: failed to start on portnum: " portnum ", trying next port")
(thread-sleep! 0.1)
;; (open-run-close tasks:remove-server-records tasks:open-db)
(open-run-close tasks:server-delete tasks:open-db ipaddrstr portnum)
(http-transport:try-start-server ipaddrstr (+ portnum 1)))
(print "ERROR: Tried and tried but could not start the server")))
;; any error in following steps will result in a retry
(set! *runremote* (list ipaddrstr portnum))
;; (open-run-close tasks:remove-server-records tasks:open-db)
(open-run-close tasks:server-register
tasks:open-db
(current-process-id)
ipaddrstr portnum 0 'live 'http)
(print "INFO: Trying to start server on " ipaddrstr ":" portnum)
;; This starts the spiffy server
(start-server port: portnum)
(open-run-close tasks:server-delete tasks:open-db ipaddrstr portnum)
(print "INFO: server has been stopped")))
;;======================================================================
;; S E R V E R U T I L I T I E S
;;======================================================================
;;======================================================================
(thread-sleep! 4) ;; no need to do this very often
;; NB// sync currently does NOT return queue-length
(let () ;; (queue-len (cdb:client-call server-info 'sync #t 1)))
;; (print "Server running, count is " count)
(if (< count 1) ;; 3x3 = 9 secs aprox
(loop (+ count 1)))
;; Check that iface and port have not changed (can happen if server port collides)
(mutex-lock! *heartbeat-mutex*)
(set! sdat *runremote*)
(mutex-unlock! *heartbeat-mutex*)
(if (not (equal? sdat (list iface port)))
(begin
(debug:print-info 1 "interface changed, refreshing iface and port info")
(set! iface (car sdat))
(set! port (cadr sdat))
(set! spid (tasks:server-get-server-id tdb #f iface port #f))))
;; NOTE: Get rid of this mechanism! It really is not needed...
(tasks:server-update-heartbeat tdb spid)
;; (if ;; (or (> numrunning 0) ;; stay alive for two days after last access
(mutex-lock! *heartbeat-mutex*)
(set! last-access *last-db-access*)
(mutex-unlock! *heartbeat-mutex*)
-update-meta : update the tests metadata for all tests
-env2file fname : write the environment to fname.csh and fname.sh
-setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
overwritten by values set in config files.
-server -|hostname : start the server (reduces contention on megatest.db), use
- to automatically figure out hostname
-transport http|zmq : use http or zmq for transport (default is http)
-daemonize : fork into background and disconnect from stdin/out
-list-servers : list the servers
-stop-server id : stop server specified by id (see output of -list-servers)
-repl : start a repl (useful for extending megatest)
-load file.scm : load and run file.scm
Spreadsheet generation
-extract-ods fname.ods : extract an open document spreadsheet from the database
-pathmod path : insert path, i.e. path/runame/itempath/logfile.html
will clear the field if no rundir/testname/itempath/logfile
megatest -test-files 'logs/*.log' -target ubuntu/n%/no% :runname w49% -testpatt test_mt%
Called as " (string-intersperse (argv) " ") "
Version " megatest-version ", built from " megatest-fossil-hash ))
;; -gui : start a gui interface
;; -config fname : override the runconfig file with fname
;; -kill-server host:port|pid : kill server specified by host:port or pid
;; process args
(define remargs (args:get-args
(argv)
(list "-runtests" ;; run a specific test
"-config" ;; override the config file name
"-execute" ;; run the command encoded in the base64 parameter
;; no need to login as status of #t indicates we are connecting to correct
;; server
(if (equal? state "dead")
(if (> last-update (* 25 60 60)) ;; keep records around for slighly over a day.
(open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid action: 'delete))
(if (> last-update 20) ;; Mark as dead if not updated in last 20 seconds
(open-run-close tasks:server-deregister tasks:open-db hostname pullport: pullport pid: pid)))
(format #t fmtstr id mt-ver pid hostname interface pullport pubport last-update
(if status "alive" "dead") transport))) (if status "alive" "dead") transport)
(if (equal? id sid)
(begin
(debug:print-info 0 "Attempting to stop server with pid " pid)
(tasks:kill-server status hostname pullport pid transport)))))
servers)
(debug:print-info 1 "Done with listservers")
(set! *didsomething* #t)
(exit) ;; must do, would have to add checks to many/all calls below
)
(exit)))
;; if not list or kill then start a client (if appropriate)
;;======================================================================
;; read a config file, loading only the section pertinent
;; to this run field1val/field2val/field3val ...
;;======================================================================
(use format)
(use format directory-utils)
(declare (unit runconfig))
(declare (uses common))
(include "common_records.scm")
(debug:print-info 4 "run-limits-info = " run-limits-info)
(cond ;; INNER COND #1 for a launchable test
;; Check item path against item-patts
((not (tests:match test-patts (tests:testqueue-get-testname test-record) item-path)) ;; This test/itempath is not to be run
;; else the run is stuck, temporarily or permanently
;; but should check if it is due to lack of resources vs. prerequisites
(debug:print-info 1 "Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " test-patts)
(thread-sleep! *global-delta*)
;; (thread-sleep! *global-delta*)
(if (not (null? tal))
(loop (car tal)(cdr tal) reruns)))
( ;; (and
(not (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f))
;; (and max-concurrent-jobs (> (- max-concurrent-jobs num-running) 5)))
(debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
(open-run-close db:tests-register-test #f run-id test-name item-path)
(hash-table-set! test-registery (runs:make-full-test-name test-name item-path) #t)
(thread-sleep! *global-delta*)
;; (thread-sleep! *global-delta*)
(runs:shrink-can-run-more-tests-delay)
(loop (car newtal)(cdr newtal) reruns))
((not have-resources) ;; simply try again after waiting a second
(debug:print-info 1 "no resources to run new tests, waiting ...")
(thread-sleep! (+ 2 *global-delta*))
;; (thread-sleep! (+ 2 *global-delta*))
;; could have done hed tal here but doing car/cdr of newtal to rotate tests
(loop (car newtal)(cdr newtal) reruns))
((and have-resources
(or (null? prereqs-not-met)
(and (eq? testmode 'toplevel)
(null? non-completed))))
(run:test run-id runname keyvallst test-record flags #f)
(runs:shrink-can-run-more-tests-delay)
(thread-sleep! *global-delta*)
;; (thread-sleep! *global-delta*)
(if (not (null? tal))
(loop (car tal)(cdr tal) reruns)))
(else ;; must be we have unmet prerequisites
(debug:print 4 "FAILS: " fails)
;; If one or more of the prereqs-not-met are FAIL then we can issue
;; a message and drop hed from the items to be processed.
(if (null? fails)
(begin
;; couldn't run, take a breather
(debug:print-info 4 "Shouldn't really get here, race condition? Unable to launch more tests at this moment, killing time ...")
(thread-sleep! (+ 0.01 *global-delta*)) ;; long sleep here - no resources, may as well be patient
;; (thread-sleep! (+ 0.01 *global-delta*)) ;; long sleep here - no resources, may as well be patient
;; we made new tal by sticking hed at the back of the list
(loop (car newtal)(cdr newtal) reruns))
;; the waiton is FAIL so no point in trying to run hed ever again
(if (not (null? tal))
(if (vector? hed)
(begin (debug:print 1 "WARN: Dropping test " (db:test-get-testname hed) "/" (db:test-get-item-path hed)
" from the launch list as it has prerequistes that are FAIL")
(runs:shrink-can-run-more-tests-delay)
(thread-sleep! *global-delta*)
;; (thread-sleep! *global-delta*)
(loop (car tal)(cdr tal) (cons hed reruns)))
(begin
(debug:print 1 "WARN: Test not processed correctly. Could be a race condition in your test implementation? " hed) ;; " as it has prerequistes that are FAIL. (NOTE: hed is not a vector)")
(runs:shrink-can-run-more-tests-delay)
(thread-sleep! (+ 0.01 *global-delta*))
;; (thread-sleep! (+ 0.01 *global-delta*))
(loop hed tal reruns))))))))) ;; END OF INNER COND
;; case where an items came in as a list been processed
((and (list? items) ;; thus we know our items are already calculated
(not itemdat)) ;; and not yet expanded into the list of things to be done
(if (and (debug:debug-mode 1) ;; (>= *verbosity* 1)
(> (length items) 0)
(tests:testqueue-set-item_path! new-test-record my-item-path)
(hash-table-set! test-records newtestname new-test-record)
(set! tal (cons newtestname tal)))))) ;; since these are itemized create new test names testname/itempath
items)
(if (not (null? tal))
(begin
(debug:print-info 4 "End of items list, looping with next after short delay")
(thread-sleep! (+ 0.01 *global-delta*))
;; (thread-sleep! (+ 0.01 *global-delta*))
(loop (car tal)(cdr tal) reruns))))
;; if items is a proc then need to run items:get-items-from-config, get the list and loop
;; - but only do that if resources exist to kick off the job
((or (procedure? items)(eq? items 'have-procedure))
(let ((can-run-more (runs:can-run-more-tests test-record)))
(if (and (list? can-run-more)
(setenv "MT_TEST_NAME" test-name) ;;
(setenv "MT_RUNNAME" runname)
(set-megatest-env-vars run-id) ;; these may be needed by the launching process
(let ((items-list (items:get-items-from-config tconfig)))
(if (list? items-list)
(begin
(tests:testqueue-set-items! test-record items-list)
(thread-sleep! *global-delta*)
;; (thread-sleep! *global-delta*)
(loop hed tal reruns))
(begin
(debug:print 0 "ERROR: The proc from reading the setup did not yield a list - please report this")
(exit 1))))))
((null? fails)
(debug:print-info 4 "fails is null, moving on in the queue but keeping " hed " for now")
;; only increment num-retries when there are no tests runing
(loop (car newtal)(cdr newtal) reruns))) ;; an issue with prereqs not yet met?
((and (not (null? fails))(eq? testmode 'normal))
(debug:print-info 1 "test " hed " (mode=" testmode ") has failed prerequisite(s); "
(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
", removing it from to-do list")
(if (not (null? tal))
(begin
(thread-sleep! *global-delta*)
;; (thread-sleep! *global-delta*)
(loop (car tal)(cdr tal)(cons hed reruns)))))
(else
(debug:print 8 "ERROR: No handler for this condition.")
(thread-sleep! (+ 1 *global-delta*))
(loop (car newtal)(cdr newtal) reruns)))) ;; END OF IF CAN RUN MORE
;; if can't run more just loop with next possible test
(begin
(debug:print-info 4 "processing the case with a lambda for items or 'have-procedure. Moving through the queue without dropping " hed)
(thread-sleep! (+ 2 *global-delta*))
;; (thread-sleep! (+ 2 *global-delta*))
(loop (car newtal)(cdr newtal) reruns))))) ;; END OF (or (procedure? items)(eq? items 'have-procedure))
;; this case should not happen, added to help catch any bugs
((and (list? items) itemdat)
(debug:print 0 "ERROR: Should not have a list of items in a test and the itemspath set - please report this")
(exit 1))
((not (null? reruns))
(let* ((newlst (tests:filter-non-runnable run-id tal test-records)) ;; i.e. not FAIL, WAIVED, INCOMPLETE, PASS, KILLED,
(junked (lset-difference equal? tal newlst)))
(debug:print-info 4 "full drop through, if reruns is less than 100 we will force retry them, reruns=" reruns ", tal=" tal)
(if (< num-retries max-retries)
(set! newlst (append reruns newlst)))
(set! num-retries (+ num-retries 1))
(thread-sleep! (+ 1 *global-delta*))
;; (thread-sleep! (+ 1 *global-delta*))
(if (not (null? newlst))
;; since reruns have been tacked on to newlst create new reruns from junked
(loop (car newlst)(cdr newlst)(delete-duplicates junked)))))
((not (null? tal))
(debug:print-info 4 "I'm pretty sure I shouldn't get here."))
(else
(debug:print-info 4 "Exiting loop with...\n hed=" hed "\n tal=" tal "\n reruns=" reruns))
(force (set! runflag #t))
;; NOT_STARTED, run no matter what
((member (test:get-state testdat) '("DELETED" "NOT_STARTED"))(set! runflag #t))
;; not -rerun and PASS, WARN or CHECK, do no run
((and (or (not rerun)
keepgoing)
;; Require to force re-run for COMPLETED or *anything* + PASS,WARN or CHECK
(or (member (test:get-status testdat) '("PASS" "WARN" "CHECK"))
(or (member (test:get-status testdat) '("PASS" "WARN" "CHECK" "SKIP"))
(member (test:get-state testdat) '("COMPLETED"))))
(debug:print-info 2 "running test " test-name "/" item-path " suppressed as it is " (test:get-state testdat) " and " (test:get-status testdat))
(set! runflag #f))
;; -rerun and status is one of the specifed, run it
((and rerun
(let* ((rerunlst (string-split rerun ","))
(must-rerun (member (test:get-status testdat) rerunlst)))
(if (setup-for-run)
(let ((db (open-db)))
(let loop ()
(let ((last-write-flush-time #f))
(mutex-lock! *incoming-mutex*)
(set! last-write-flush-time *server:last-write-flush*)
(mutex-unlock! *incoming-mutex*)
(if (> (- (current-milliseconds) last-write-flush-time) 400)
(if (> (- (current-milliseconds) last-write-flush-time) 10)
(begin
(mutex-lock! *db:process-queue-mutex*)
(db:process-cached-writes db)
(mutex-unlock! *db:process-queue-mutex*)
(thread-sleep! 0.5))))
(thread-sleep! 0.005))))
(loop)))
(begin
(debug:print 0 "ERROR: failed to setup for Megatest in server:write-queue-handler")
(exit 1))))
;;======================================================================
;; S E R V E R U T I L I T I E S
(case action
((delete)(sqlite3:execute mdb "DELETE FROM servers WHERE hostname=? AND port=?;" hostname port))
(else (sqlite3:execute mdb "UPDATE servers SET state='dead' WHERE hostname=? AND port=?;" hostname port)))
(debug:print 0 "ERROR: tasks:server-deregister called with neither pid nor port specified"))))
(define (tasks:server-deregister-self mdb hostname)
(tasks:server-deregister mdb hostname pid: (current-process-id)))
;; need a simple call for robustly removing records given host and port
(define (tasks:server-delete mdb hostname port)
(tasks:server-deregister mdb hostname port: port action: 'delete))
(define (tasks:server-get-server-id mdb hostname iface port pid)
(debug:print-info 12 "tasks:server-get-server-id " mdb " " hostname " " iface " " port " " pid)
(let ((res #f))
(sqlite3:for-each-row
(lambda (id)
(set! res id))
;; (if (null? tal)
;; #f
;; (loop (car tal)(cdr tal))))))))))
(define (tasks:remove-server-records mdb)
(sqlite3:execute mdb "DELETE FROM servers;"))
(define (tasks:mark-server hostname port pid state)
(define (tasks:mark-server hostname port pid state transport)
(if port
(open-run-close tasks:server-deregister tasks:open-db hostname port: port)
(open-run-close tasks:server-deregister tasks:open-db hostname pid: pid)))
(define (tasks:kill-server status hostname port pid)
(define (tasks:kill-server status hostname port pid transport)
(debug:print-info 1 "Removing defunct server record for " hostname ":" port)
(if port
(open-run-close tasks:server-deregister tasks:open-db hostname port: port)
(open-run-close tasks:server-deregister tasks:open-db hostname pid: pid))
(if status ;; #t means alive
(begin
(if (equal? hostname (get-host-name))
(handle-exceptions
exn
(debug:print-info 0 "server may or may not be dead, check for megatest -server running as pid " pid "\n"
" EXCEPTION: " ((condition-property-accessor 'exn 'message) exn))
(debug:print 1 "Sending signal/term to " pid " on " hostname)
(process-signal pid signal/term)
(thread-sleep! 5) ;; give it five seconds to die peacefully then do a brutal kill
;;(process-signal pid signal/kill)
(process-signal pid signal/kill)) ;; local machine, send sig term
) ;; local machine, send sig term
(begin
(debug:print-info 1 "Stopping remote servers not yet supported."))))
(debug:print-info 1 "Telling alive server on " hostname ":" port " to commit servercide")
(cdb:kill-server zmq-socket)))) ;; remote machine, try telling server to commit suicide
;; (debug:print-info 1 "Telling alive server on " hostname ":" port " to commit servercide")
;; (let ((serverdat (list hostname port)))
;; (case (string->symbol transport)
;; ((http)(http-transport:client-connect hostname port))
;; (else (debug:print "ERROR: remote stopping servers of type " transport " not supported yet")))
;; (cdb:kill-server serverdat))))) ;; remote machine, try telling server to commit suicide
(begin
(if status
(if (equal? hostname (get-host-name))
(begin
(debug:print-info 1 "Sending signal/term to " pid " on " hostname)
(process-signal pid signal/term) ;; local machine, send sig term
(thread-sleep! 5) ;; give it five seconds to die peacefully then do a brutal kill
(keep-test #t)
(test-id (cdb:remote-run db:get-test-id #f run-id test-name item-path))
(tdat (cdb:get-test-info-by-id *runremote* test-id)))
(if tdat
(begin
;; Look at the test state and status
(if (or (member (db:test-get-status tdat)
'("PASS" "WARN" "WAIVED" "CHECK"))
'("PASS" "WARN" "WAIVED" "CHECK" "SKIP"))
(member (db:test-get-state tdat)
'("INCOMPLETE" "KILLED")))
(set! keep-test #f))
;; examine waitons for any fails. If it is FAIL or INCOMPLETE then eliminate this test
;; from the runnable list
(if keep-test
[fields]
SYSTEM TEXT
RELEASE TEXT
[setup]
# Adjust max_concurrent_jobs to limit how much you load your machines
max_concurrent_jobs 500
# This is your link path, you can move it but it is generally better to keep it stable
linktree #{shell readlink -f #{getenv PWD}/../simplelinks}
[include testqa/configs/megatest.abc.config]
# Valid values for state and status for steps, NB// It is not recommended you use this
[validvalues]
state start end completed
# Job tools are more advanced ways to control how your jobs are launched
[jobtools]
useshell yes
launcher nbfake
[include megatest.def.config]
# You can override environment variables for all your tests here
[env-override]
EXAMPLE_VAR example value
# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{scheme (nice-path "#{getenv PWD}/../simpleruns")}
[default]
ALLTESTS see this variable
# Your variables here are grouped by targets [SYSTEM/RELEASE]
[SYSTEM_val/RELEASE_val]
ANOTHERVAR only defined if target is SYSTEM_val/RELEASE_val
# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh
# Test requirements are specified here
[requirements]
# waiton setup
priority 0
# Iteration for your tests are controlled by the items section
[items]
NUMBER #{scheme (string-intersperse (map number->string (sort (let loop ((a 0)(res '()))(if (< a 120)(loop (+ a 1)(cons a res)) res)) >)) " ")}
# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner matt
description An example test
tags tagone,tagtwo
reviewed never
[fields]
sysname TEXT
fsname TEXT
datapath TEXT
# refareas can be searched to find previous runs
# the path points to where megatest.db exists
[refareas]
area1 /tmp/oldarea/megatest
[include #{getenv MT_RUN_AREA_HOME}/config/mt_include_1.config]
[include config/mt_include_1.config]
[setup]
# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/.
# or for hard links
# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/ TEST_TARG_PATH/
# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.
# FULL or 2, NORMAL or 1, OFF or 0
synchronous OFF
# Throttle roughly scales the db access milliseconds to seconds delay
throttle 0.2
# Max retries allows megatest to re-check that a tests status has changed
# as tests can have transient FAIL status occasionally
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
-
+
# XTERM [system xterm]
# RUNDEAD [system exit 56]
[server]
# If the server can't be started on this port it will try the next port until
# it succeeds
port 8090
port 8080
# This server will keep running this number of hours after last access.
# Three minutes is 0.05 hours
timeout 0.05
## disks are:
## name host:/path/to/area
' d='M14,14H2V2h12v12z'/%3E%3Cpath style='fill:rgb(64,64,64)' d='M13,13H3V3h10v10z'/%3E%3Cpath style='fill:rgb(248,248,248)' d='M12,12H4V4h8v8z'/%3E%3Cpath style='fill:rgb(80,128,208)' d='M11,9H5V7h6v6z'/%3E%3C/svg%3E)
' d='M14,14H2V2h12v12z'/%3E%3Cpath style='fill:rgb(64,64,64)' d='M13,13H3V3h10v10z'/%3E%3Cpath style='fill:rgb(248,248,248)' d='M12,12H4V4h8v8z'/%3E%3Cpath style='fill:rgb(80,128,208)' d='M5,7h2v-2h2v2h2v2h-2v2h-2v-2h-2z'/%3E%3C/svg%3E)
Overview