Megatest

INFO: (0) Number non-cached queries 74289
INFO: (0) Average non-cached time   1055.09826488444 ms
INFO: (0) Server shutdown complete. Exiting

Start: 0 at Sun Apr 28 22:18:25 MST 2013
Max:  52 at Sun Apr 28 23:06:59 MST 2013
End:   6 at Sun Apr 28 23:47:51 MST 2013

========================================================================

				     (substring test-physical-path
						0
						partial-path-index)
				     #f))
	      ;; we need our archive dir checked for every test to enable folks who want to store other ways.
	      (archive-info (archive:allocate-new-archive-block blockid-cache *toppath* tsname min-space target run-name test-name))
	      (archive-dir  (if archive-info (cdr archive-info) #f))
	      (archive-id   (if archive-info (car archive-info) -1))
	      (archive-id   (if archive-info (car archive-info) -1)))

	      )
	 
	 (if (not archive-dir) ;; no archive disk found, this is fatal
	     (begin
	       (debug:print 0 *default-log-port* "FATAL: No archive disks found. Please add disks with at least "
			    min-space " MB space to the [archive-disks] section of megatest.config")
	       (debug:print 0 *default-log-port* "       use [archive] minspace to specify minimum available space")
	       (debug:print 0 *default-log-port* "   disks: "

	       (hash-table-ref test-groups test-base))))
	   ;; (mutex-unlock! bup-mutex)
	   (for-each
	    (lambda (test-dat)
	      (let ((test-id           (db:test-get-id        test-dat))
		    (run-id            (db:test-get-run_id    test-dat)))
		(rmt:test-set-archive-block-id run-id test-id archive-id)
		(if (member archive-command '("save-remove"))
		    (runs:remove-test-directory test-dat 'archive-remove))))
		(if (member (symbol->string archive-command) '("save-remove"))
                    (begin 
                     (debug:print-info 0 *default-log-port* "remove testdat")
		    (runs:remove-test-directory test-dat 'archive-remove)))))
	    (hash-table-ref test-groups test-base)))))
       (hash-table-keys disk-groups))
    #t))

(define (archive:bup-restore archive-command run-id run-name tests rp-mutex bup-mutex)  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;

   (read (open-input-string (z3:decode-buffer (base64:base64-decode instr))))))

;; dot-locking egg seems not to work, using this for now
;; if lock is older than expire-time then remove it and try again
;; to get the lock
;;
(define (common:simple-file-lock fname #!key (expire-time 300))
  (let ((fmod-time (handle-exceptions
		       ext
		     (current-seconds)
		     (file-modification-time fname))))
    (if (common:file-exists? fname)
	(if (> (- (current-seconds)(file-modification-time fname)) expire-time)
	(if (> (- (current-seconds) fmod-time) expire-time)
	    (begin
              (handle-exceptions exn #f (delete-file* fname))	
	      (handle-exceptions exn #f (delete-file* fname))	
	      (common:simple-file-lock fname expire-time: expire-time))
	    #f)
	(let ((key-string (conc (get-host-name) "-" (current-process-id))))
	  (with-output-to-file fname
	    (lambda ()
	      (print key-string)))
	  (thread-sleep! 0.25)
	  (if (common:file-exists? fname)
	      (handle-exceptions exn
                #f 
                (with-input-from-file fname
	  	  (lambda ()
		    (equal? key-string (read-line)))))
	      #f))))
	      #f)))))

(define (common:simple-file-lock-and-wait fname #!key (expire-time 300))
  (let ((end-time (+ expire-time (current-seconds))))
    (let loop ((got-lock (common:simple-file-lock fname expire-time: expire-time)))
      (if got-lock
	  #t
	  (if (> end-time (current-seconds))

		 (file-read-access? fullpath))
	    (handle-exceptions
	     exn
	     #f
	     (debug:print 2 *default-log-port* "reading file " fullpath)
	     (let ((real-age (- (current-seconds)(file-change-time fullpath)))) 
	       (if (< real-age age)
		   (handle-exceptions
		       exn
		     (begin
		       (debug:print-info 1 *default-log-port* " removing bad file " fullpath)
		       (delete-file* fullpath)
		       #f)
		   (with-input-from-file fullpath read)
		     (with-input-from-file fullpath read))
		   (begin
		     (debug:print-info 2 *default-log-port* "file " fullpath " is too old (" real-age" seconds) to trust, skipping reading it")
		     #f))))
	    (begin
	      (debug:print 2 *default-log-port* "not reading file " fullpath)
	      #f)))
      #f))

(define (common:wait-for-cpuload maxload-in numcpus-in waitdelay #!key (count 1000) (msg #f)(remote-host #f)(force-maxload #f)(num-tries 5))
  (let* ((loadavg (common:get-cpu-load remote-host))
	 (numcpus (if (<= 1 numcpus-in) ;; not possible to have zero.  If we get 1, it's possible that we got the previous default, and we should check again
		      (common:get-num-cpus remote-host)
		      numcpus-in))
	 (maxload (if force-maxload
		      maxload-in
		      (if (number? maxload-in)
			  (max maxload-in 0.5)
		      (max maxload-in 0.5))) ;; so maxload must be greater than 0.5 for now BUG - FIXME?
			  0.5))) ;; so maxload must be greater than 0.5 for now BUG - FIXME?
	 (first   (car loadavg))
	 (next    (cadr loadavg))
	 (adjmaxload (* maxload (max 1 numcpus))) ;; possible bug where
					       ;; numcpus (or could be
					       ;; maxload) is zero,
					       ;; crude fallback is to
					       ;; at least use 1

                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
                (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
              (begin
                (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time" run-duration="run-duration)
                (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
        db
        "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('REMOTEHOSTSTART');"
        run-id remotehoststart-deadtime) ;; default time 230 seconds.
        run-id remotehoststart-deadtime) ;; default time 230 seconds

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")

              ;;      			(or (not dbexists) ;; if no file then something wrong - mark as incomplete
              ;;      			    (> (- (current-seconds)(file-modification-time tdatpath)) 600)))) ;; no change in 10 minutes to testdat.db - she's dead Jim
              ;;      		    incompleted))
              (min-incompleted-ids (map car incompleted)) ;; do 'em all
              (all-ids             (append min-incompleted-ids (map car oldlaunched))))
         (if (> (length all-ids) 0)
             (begin
	       ;; (launch:is-test-alive "localhost" 435)
               (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as DEAD")
               (for-each
                  (lambda (test-id)
                    (let* (
                      (run-dir (db:test-get-rundir-from-test-id dbstruct run-id test-id))
                      (result (db:get-status-from-final-status-file run-dir)))
                    (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
                      (begin
                        (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
                        (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "PASS" "Test stopped responding but it has PASSED; marking it PASS in the DB.")
                    (let* (;; (run-dir (db:test-get-rundir-from-test-id dbstruct run-id test-id))
			   (tinfo   (db:get-test-info-by-id dbstruct run-id test-id))
			   (run-dir (db:test-get-rundir     tinfo))
			   (host    (db:test-get-host       tinfo))
			   (pid     (db:test-get-process_id tinfo))
			   (result (db:get-status-from-final-status-file run-dir)))
		      (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
			  (begin
			    (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
			    (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "PASS"
                      )
                      (begin
                      (debug:print 0 *default-log-port* "INFO: test " test-id " final state/status is not COMPLETED/PASS. It is " result)
                      (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD" "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")
								   "Test stopped responding but it has PASSED; marking it PASS in the DB."))
			  (let ((is-alive (launch:is-test-alive host pid)))
			    (if is-alive
				(debug:print 0 *default-log-port* "INFO: test " test-id " on host " host " has a process on pid " pid ", NOT setting to DEAD.")
				(begin
				  (debug:print 0 *default-log-port* "INFO: test " test-id " final state/status is not COMPLETED/PASS. It is " result)
				  (db:set-state-status-and-roll-up-items dbstruct run-id test-id 'foo "COMPLETED" "DEAD"
                      )
                     )
                    )
                  )
                  all-ids)
             )
         )
									 "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")))))))
		  all-ids)
	       ;;call end of eud of run detection for posthook
	       (launch:end-of-run-check run-id)
	       )))))))

       )
     )
   )
 )
)

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 
;; 		   (string-intersperse (map conc all-ids) ",")

# tabled
[itemstable]
A x y
B 1 2

# Yields x/1 y/2</pre>
</div></div>
<div class="listingblock">
<div class="title">Or use files</div>
<div class="content monospaced">
<pre>[itemopts]
slash path/to/file/with/items
# or
space path/to/file/with/items</pre>
</div></div>
<div class="listingblock">
<div class="title">File format for / delimited</div>
<div class="content monospaced">
<pre>key1/key2/key3
val1/val2/val2
...</pre>
</div></div>
<div class="listingblock">
<div class="title">File format for space delimited</div>
<div class="content monospaced">
<pre>key1 key2 key3
val1 val2 val2
...</pre>
</div></div>
</div>
<div class="sect2">
<h3 id="_requirements_section">Requirements section</h3>
<div class="listingblock">
<div class="title">Header</div>
<div class="content monospaced">
<pre>[requirements]</pre>

</div>
</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.5<br>
Last updated
Last updated 2020-07-22 14:21:46 PDT
 2020-06-16 23:02:26 MST
</div>
</div>
</body>
</html>

[itemstable]
A x y
B 1 2

# Yields x/1 y/2
------------------

.Or use files
------------------
[itemopts]
slash path/to/file/with/items
# or
space path/to/file/with/items
------------------

.File format for / delimited
------------------
key1/key2/key3
val1/val2/val2
...
------------------

.File format for space delimited
------------------
key1 key2 key3
val1 val2 val2
...
------------------

Requirements section
~~~~~~~~~~~~~~~~~~~~

.Header
-------------------
[requirements]

(define (items:check-valid-items class item)
  (let ((valid-values (let ((s (configf:lookup *configdat* "validvalues" class)))
			(if s (string-split s) #f))))
    (if valid-values
	(if (member item valid-values)
	    item #f)
	item)))

;;  '(("k1" "k2" "k3")
;;    ("a" "b" "c")
;;    ("d" "e" "f"))
;;
;;    => '((("k1" "a")("k2" "b")("k3" "c"))
;;         (("k1" "d")("k2" "e")("k3" "f")))
;;
(define (items:first-row-intersperse data)
  (if (< (length data) 2)
      '()
      (let ((header (car data))
	    (rows   (cdr data)))
	(map (lambda (row)
	       (map list header row))
	     rows))))

;; k1/k2/k3
;; a/b/c
;; d/e/f
;;    => '(("k1" "k2" "k3")
;;         ("a" "b" "c")
;;         ("d" "e" "f"))
;;
;;    => '((("k1" "a")("k2" "b")("k3" "c"))
;;         (("k1" "d")("k2" "e")("k3" "f")))
;;
(define (items:read-items-file fname ftype) ;; 'sxml 'slash 'space 
  (if (and fname (file-exists? fname))
      (items:first-row-intersperse (case ftype
				     ((slash space)
				      (let ((splitter (case ftype
							((slash) (lambda (x)(string-split x "/")))
							(else    string-split))))
					(debug:print 0 *default-log-port* "Reading " fname " of type " ftype)
					(with-input-from-file fname
					  (lambda ()
					    (let loop ((inl (read-line))
						       (res '()))
					      (if (eof-object? inl)
						  res
						  (loop (read-line)(cons (splitter inl) res))))))))
				     ((sxml)(with-input-from-file fname read))
				     (else (debug:print 0 *default-log-port* "items file type " ftype " not recognised"))))
      (begin
	(if fname (debug:print 0 *default-log-port* "no items file " fname " found"))
	'())))

(define (items:get-items-from-config tconfig)
  (let* ((slashf      (configf:lookup tconfig "itemopts" "slash")) ;; a/b/c\nd/e/f\n ...
	 (sxmlf       (configf:lookup tconfig "itemopts" "sxml"))  ;; '(("a" "b" "c")("d" "e" "f") ...)
	 (spacef      (configf:lookup tconfig "itemopts" "space")) ;; a b c\nd e f\n ...
  (let* ((have-items  (hash-table-ref/default tconfig "items"      #f))
	 (have-items  (hash-table-ref/default tconfig "items"      #f))
	 (have-itable (hash-table-ref/default tconfig "itemstable" #f))
	 (items       (hash-table-ref/default tconfig "items"      '()))
	 (itemstable  (hash-table-ref/default tconfig "itemstable" '())))
    (debug:print 5 *default-log-port* "items: " items " itemstable: " itemstable)
    (set! items (map (lambda (item)
		       (if (procedure? (cadr item))
			   (list (car item)((cadr item)))  ;; evaluate the proc
			   item))
		     items))
    (set! itemstable (map (lambda (item)
			    (if (procedure? (cadr item))
				(list (car item)((cadr item)))  ;; evaluate the proc
				item))
			  itemstable))
    (if (and have-items  (null? items))     (debug:print 0 *default-log-port* "WARNING:[items] section in testconfig but no entries defined"))
    (if (and have-itable (null? itemstable))(debug:print 0 *default-log-port* "WARNNG:[itemstable] section in testconfig but no entries defined"))
    (if (or (not (null? items))(not (null? itemstable)))
    (if (or (not (null? items))
	    (not (null? itemstable))
	    slashf
	    sxmlf
	    spacef)
	(append (item-assoc->item-list items)
		(item-table->item-list itemstable))
		(item-table->item-list itemstable)
		(items:read-items-file slashf 'slash)
		(items:read-items-file sxmlf  'sxml)
		(items:read-items-file spacef 'space))
	'(()))))

;; (pp (item-assoc->item-list itemdat))


	

(define (launch:end-of-run-check run-id )
    (let*	((not-completed-cnt (rmt:get-not-completed-cnt run-id))  
           (running-cnt (rmt:get-count-tests-running-for-run-id run-id))
           (all-test-launched (rmt:get-var (conc "lunch-complete-" run-id)))
           (current-state (rmt:get-run-state run-id))
           (current-status (rmt:get-run-status run-id)))
     ;;get-vars run-id to query metadata table to check if all completed. if all-test-launched = yes then only not-completed-cnt = 0 means everyting is completed if no entry found in the table do nothing 
     (debug:print 0 *default-log-port* "rollup run state/status")                      
     (debug:print 0 *default-log-port* "Running test cnt :" running-cnt)                      
     (rmt:set-state-status-and-roll-up-run  run-id current-state current-status)
     (runs:update-junit-test-reporter-xml run-id) 
     (cond 
       ((and all-test-launched (eq? not-completed-cnt 0) (equal? all-test-launched "yes" ))
                (if (and (equal? (rmt:get-var (conc "end-of-run-" run-id)) "no") (common:simple-lock (conc "endOfRun" run-id)))
                (begin
           	(debug:print 4 *default-log-port* "look for  post hook. currseconds: " (current-seconds) " EOR " (rmt:get-var (conc "end-of-run-" run-id)))
           	(debug:print 0 *default-log-port* "look for  post hook.")
          	(runs:run-post-hook run-id))
                (debug:print 0 *default-log-port* "End of Run Detected.")
                (rmt:set-var (conc "end-of-run-" run-id) "yes")
                ;(thread-sleep! 10)
          	(runs:run-post-hook run-id)
                (debug:print 4 *default-log-port* "currseconds: " (current-seconds)" eor: " (rmt:get-var (conc "end-of-run-" run-id)))
                (common:simple-unlock (conc "endOfRun" run-id)))
                 (debug:print 0 *default-log-port* "End of Run Detected but not running post hook. This should happen when eor is set to yes. This will happen only when 2 tests exit at smae time. eor= " (rmt:get-var (conc "end-of-run-" run-id)))))
        ((> running-cnt 3) 
        	  (debug:print 0 *default-log-port* "There are " running-cnt " tests running." ))
        ((> running-cnt 0)
            (debug:print 0 *default-log-port* "running cnt > 0 but <= 3 kill-running-tests-if-dead" )
   				  (let ((kill-cnt (launch:kill-tests-if-dead run-id)))
           			(if (and all-test-launched  (equal? all-test-launched "yes") (eq? kill-cnt running-cnt))
           					(launch:end-of-run-check run-id)))) ;;todo
        (else  (debug:print 0 *default-log-port* "Should it get here?? May be everything is not launched yet. Running test cnt:" running-cnt " Not completed test cnt:" not-completed-cnt)
         (let* ((not-completed-tests (rmt:get-tests-for-run run-id "%" `("NOT_STARTED" "RUNNING" "LAUNCHED" "REMOTEHOSTSTART") `() #f #f #f #f #f #f #f #f)))
       (if (> (length not-completed-tests) 0) 
           (let loop ((running-test (car not-completed-tests))
			     (tal    (cdr not-completed-tests)))
		       (let* ((test-name (vector-ref running-test 2))
                 (item-path (vector-ref running-test 11)))
			       	(debug:print 0 *default-log-port* "test " test-name "/" item-path " not completed")
              (if (not (null? tal))
				  (loop (car tal) (cdr tal)))))))))))        
 
(define (launch:is-test-alive host pid)
(if (and host pid (not (equal? host "n/a")))
(let* ((cmd (conc "ssh " host " pstree -A " pid))
      (output (with-input-from-pipe cmd read-lines)))
  (print "cmd: " cmd "\n op: " output )
  (if(eq? (length output) 0)
     #f
     #t))
#t))
  (if (and host pid (not (equal? host "n/a")))
      (let* ((cmd (conc "ssh " host " pstree -A " pid))
	     (output (with-input-from-pipe cmd read-lines)))
	(debug:print 2 *default-log-port* "Running " cmd " received " output)
	(if (eq? (length output) 0)
	   #f
	   #t))
      #t))
 
(define (launch:kill-tests-if-dead run-id)
  (let* ((running-tests (rmt:get-tests-for-run run-id "%" `("RUNNING" "LAUNCHED" "REMOTEHOSTSTART") `() #f #f #f #f #f #f #f #f)))
       (let loop ((running-test (car running-tests))
			     (tal    (cdr running-tests))
			     (kill-cnt 0))
		       (let* ((test-name (vector-ref running-test 2))

    ;; level
    (if (not not-iterated) ;; i.e. iterated
	(let ((iterated-parent  (pathname-directory (conc lnkpath "/" item-path))))
	  (debug:print-info 2 *default-log-port* "Creating iterated parent " iterated-parent)
	  (handle-exceptions
	   exn
	   (begin
	     (debug:print-error 0 *default-log-port* " Failed to create directory " iterated-parent ((condition-property-accessor 'exn 'message) exn) ", exiting")
	     (exit 1))
	     (debug:print-error 0 *default-log-port* " Failed to create directory " iterated-parent ((condition-property-accessor 'exn 'message) exn) ", continuing but link tree may be corrupted")
	     #;(exit 1))
	   (create-directory iterated-parent #t))))

    (if (symbolic-link? lnkpath) 
	(handle-exceptions
	 exn
	 (begin
	   (debug:print-error 0 *default-log-port* " Failed to remove symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
	   (exit 1))
	   (debug:print-error 0 *default-log-port* " Failed to remove symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", continuing but link tree may be corrupted.")
	   #;(exit 1))
	 (delete-file lnkpath)))

    (if (not (or (common:file-exists? lnkpath)
		 (symbolic-link? lnkpath)))
	(handle-exceptions
	 exn
	 (begin
	   (debug:print-error 0 *default-log-port* " Failed to create symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", exiting")
	   (exit 1))
	   (debug:print-error 0 *default-log-port* " Failed to create symlink " lnkpath ((condition-property-accessor 'exn 'message) exn) ", continuing but link tree may be corrupted.")
	   #;(exit 1))
	 (create-symbolic-link toptest-path lnkpath)))
    
    ;; NB - This was not working right - some top tests are not getting the path set!!!
    ;;
    ;; Do the setting of this record after the paths are created so that the shortdir can 
    ;; be set to the real directory location. This is safer for future clean up if the link
    ;; tree is damaged or lost.

	       (if (null? run-specs)
		   (debug:print 0 *default-log-port* "WARNING: No runs match target " target " and runname " runname))
	       (for-each (lambda (spec) 
			   (let* ((precmd     (if (args:get-arg "-precmd")(conc (args:get-arg "-precmd") " ") ""))
				  (newcmdline (conc
					       precmd
					       (string-substitute
						(conc "target " target)
						(conc "target " (simple-run-target spec))
						(string-substitute
						 (conc "runname " runname)
						 (conc "runname " (simple-run-runname spec))
						 orig-cmdline)))))
						(conc "runname " runname)
						(conc "runname " (simple-run-runname spec))
						orig-cmdline))))
			     (debug:print 0 *default-log-port* "ORIG: " orig-cmdline)
			     (debug:print 0 *default-log-port* "NEW:  " newcmdline)
			     (system newcmdline)))
			 run-specs))
	     (handle-run-requests target runname keys keyvals need-clean))))))

;;======================================================================

;; fake out readline usage of toplevel-command
(define (toplevel-command . a) #f)

(use srfi-1 posix srfi-69 readline ;;  regex regex-case srfi-69 apropos json http-client directory-utils rpc typed-records;; (srfi 18) extras)
   srfi-19  srfi-18 extras format regex regex-case
     (prefix dbi dbi:)
     (prefix sqlite3 sqlite3:)
     nanomsg)

(declare (uses common))
(declare (uses megatest-version))
(declare (uses margs))
(declare (uses configf))
;; (declare (uses rmt))

    ("-log"             . #f)
    ("-override-user"   . #f)
    ("-msg"             . M)
    ("-start-dir"       . S)
    ("-set-vars"        . v)
    ("-config"          . h)
    ("-time-out"        . u)
    ("-archive"         . b)
    ))
(define *switch-keys*
  '(
    ("-h"               . #f)
    ("-help"            . #f)
    ("--help"           . #f)
    ("-manual"          . #f)

    (rerun-clean . "-rerun-clean")
    (rerun-all   . "-rerun-all")
    (kill-run    . "-kill-runs")
    (kill-rerun  . "-kill-rerun")
    (lock        . "-lock")
    (unlock      . "-unlock")
    (sync        . "")
    (archive     . "-archive")
    (archive     . "")
    (set-ss      . "-set-state-status")
    (remove      . "-remove-runs")))

;; manually keep this list updated from the keys to
;; the case *action* near the end of this file.
(define *other-actions*
  '(run remove rerun set-ss archive kill list

	      (rgconf    (car rgconfdat))
	      (all-areas (map car (configf:get-section mtconf "areas")))
	      (contours  (configf:get-section mtconf "contours"))
	      (torun     (make-hash-table)) ;; target => ( ... info ... )
	      (rgentargs (hash-table-keys rgconf))) ;; these are the targets registered for automatically triggering

	 ;;(print "rgentargs: " rgentargs)
	 
	 (for-each
	  (for-each
	  (lambda (runkey)
	    (let* ((keydats   (configf:get-section rgconf runkey)))
	      (for-each
	       (lambda (sense) ;; these are the sense rules
		 (let* ((key        (car sense))
			(val        (cadr sense))
			(keyparts   (string-split key ":")) ;; contour:ruletype:action:optional

       (let* ((rgconfdat (find-and-read-config (conc toppath "/runconfigs.config")))
	      (rgconf    (car rgconfdat))
	      (areas     (configf:get-section mtconf "areas"))
	      (contours  (configf:get-section mtconf "contours"))
	      (pkts      (find-pkts pdb '(cmd) '()))
	      (torun     (make-hash-table)) ;; target => ( ... info ... )
	      (rgentargs (hash-table-keys rgconf))) ;; these are the targets registered for automatically triggering
         (sqlite3:set-busy-handler! (dbi:db-conn pdb) (sqlite3:make-busy-timeout 10000))
	 (for-each
	  (lambda (pktdat)
	    (let* ((pkta    (alist-ref 'apkt pktdat))
		   (action  (alist-ref 'A pkta))
		   (cmdline (pkt->cmdline pkta))
		   (uuid    (alist-ref 'Z pkta))
		   (user    (alist-ref 'U pkta))

;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat      (case (remote-transport runremote)
	 (dat-in      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))

;; No Title 
;; Error: (vector-ref) out of range
;; #(#<condition: (exn type)> (#("db.scm:3740: regex#regexp" #f #f) #("db.scm:3739: regex#string-substitute" #f #f) #("db.scm:3738: base64#base64-decode" #f #f) #("db.scm:3737: z3#z3:decode-buffer" #f #f) #("db.scm:3736: with-input-from-string" #f #f) #("db.scm:3741: s11n#deserialize" #f #f) #("api.scm:374: api:execute-requests" #f #f) #("api.scm:139: call-with-current-continuation" #f #f) #("api.scm:139: with-exception-handler" #f #f) #("api.scm:139: ##sys#call-with-values" #f #f) #("api.scm:158: string->symbol" #f #f) #("api.scm:160: current-milliseconds" #f #f) #("api.scm:161: dbr:dbstruct-read-only" #f #f) #("api.scm:139: k15" #f #f) #("api.scm:139: g19" #f #f) #("api.scm:142: get-call-chain" #f #f)) #("get-test-info-by-id" (1102 507299)))
;; 6
;; 
;; 	Call history:
;; 
;; 	http-transport.scm:306: thread-terminate!	  
;; 	http-transport.scm:307: debug:print-info	  
;; 	common_records.scm:235: debug:debug-mode	  
;; 	rmt.scm:259: k587	  
;; 	rmt.scm:259: g591	  
;; 	rmt.scm:276: http-transport:server-dat-update-last-access	  
;; 	http-transport.scm:364: current-seconds	  
;; 	rmt.scm:282: debug:print-info	  
;; 	common_records.scm:235: debug:debug-mode	  
;; 	rmt.scm:283: mutex-unlock!	  
;; 	rmt.scm:287: extras-transport-succeded	  	<--
;; +-----------------------------------------------------------------------------+
;; | Exit Status    : 70  
;;  

	 (dat      (if (and (vector? dat-in) ;; ... check it is a correct size
			    (> (vector-length dat-in) 1))
		       dat-in
		       (vector #f (conc "communications fail (type 2), dat-in=" dat-in))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))
    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)

    (runs:update-all-test_meta #f)

    ;; run the run prehook if there are no tests yet run for this run:
    ;;
    (runs:run-pre-hook run-id)
    ;; mark all test launced flag as false in the meta table 
    (rmt:set-var (conc "lunch-complete-" run-id) "no")
    (debug:print-info 1 *default-log-port* "Setting end-of-run to no")
    (let* ((config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       (if x (string->number x) #f)))
	  (config-rerun-cnt (if config-reruns
			config-reruns
			1)))
    (if (eq? config-rerun-cnt run-count)
      (rmt:set-var (conc "end-of-run-" run-id) "no")))

    (rmt:set-run-state-status run-id "new" "n/a")
    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data
    ;;
    ;; What happended, this code is now duplicated in tests!?
    ;;

	    (if (> run-count 0) ;; handle reruns
		(begin
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		  ;; recursive call to self
      (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))))
      (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))
                  (launch:end-of-run-check run-id)))
	  (debug:print-info 0 *default-log-port* "No tests to run")))
    (debug:print-info 4 *default-log-port* "All done by here")
    ;; TODO: try putting post hook call here
    ;(if (eq? run-count 0)
      
    ; (begin  
    ;  (debug:print-info 0 *default-log-port* "Calling Post Hook")  
    ;  (debug:print-info 2 *default-log-port* " run-count " run-count)
    ;  (runs:run-post-hook run-id))
    ;  (debug:print-info 2 *default-log-port* "Not calling post hook runcount = " run-count ))   
    (rmt:tasks-set-state-given-param-key task-key "done")
     
    ;; (sqlite3:finalize! tasks-db)
    ))


;; loop logic. These are used in runs:run-tests-queue to make it a bit more readable.
;;
;; If reg not full and have items in tal then loop with (car tal)(cdr tal) reg reruns

	  (debug:print-info 0 *default-log-port* "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
          (debug:print-info 4 *default-log-port* "cond branch - "  "rtq-9")
	  (debug:print-info 4 *default-log-port* "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 ))) ;; end loop on sorted test names
    ;; this is the point where everything is launched and now you can mark the run in metadata table as all launched 
    (rmt:set-var (conc "lunch-complete-" run-id) "yes")
  
    (rmt:set-var (conc "lunch-complete-" run-id) "yes")  
        
    ;; now *if* -run-wait we wait for all tests to be done
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (thread-sleep! 10) ;; I think there is a race condition here. Let states/statuses settle
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))
      ;; (debug:print-info 13 *default-log-port* "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")

                                          )
                                          (begin
                                            (debug:print 2 *default-log-port* "Not removing directory " rundir " because either it doesn't exist or has a bad name")
                                            (debug:print 2 *default-log-port* "Is /tmp/badname: " (string=  rundir "/tmp/badname"))
                                            (debug:print 2 *default-log-port* "Exists: " (file-exists? rundir))
                                            (debug:print 2 *default-log-port* "Has run-name: " (substring-index run-name rundir))
                                            (debug:print 2 *default-log-port* "Has target: " (substring-index target rundir))
                                            ;;PJH remove record from db no need to cleanup directory
                                            (case mode
                                               ((remove-data-only)(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) (db:test-get-state test)(db:test-get-status test) #f))
                                               ((archive-remove)  (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "ARCHIVED" #f #f))
                                               (else (rmt:delete-test-records (db:test-get-run_id test) (db:test-get-id test))))

                                          )
                                        )
                                      )

                                      (if (not (null? tal))
                                         (loop (car tal)(cdr tal)))))))
				(rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))

                    (debug:print 1 *default-log-port* "Removing target " target "run: " run-name)
                    (if (not keep-records)
                      (begin
                        (debug:print 1 *default-log-port* "Removing DB records for the run.")
                        (rmt:delete-run run-id)
                        (rmt:delete-old-deleted-test-records))
                    )
                    (if (not (equal?  linkspath "/does/not/exist/I"))
	               (begin 
	           (debug:print 1 *default-log-port* "Recursively removing links dir " linkspath)
                   (runs:recursive-delete-with-error-msg linkspath)
                         (debug:print 1 *default-log-port* "Recursively removing links dir " linkspath)
                         (runs:recursive-delete-with-error-msg linkspath)))

                   (for-each (lambda(runpath)
                       (debug:print 1 *default-log-port* "Recursively removing runs dir " runpath)
                       (runs:recursive-delete-with-error-msg runpath)
                     )
                     runpaths
                   )

(define doc-template 
  '(*TOP*
    (*PI* xml "version='1.0'")
    (testsuite)))

(define (runs:update-junit-test-reporter-xml run-id)
  (let*	(
	 (junit-test-reporter	 (configf:lookup *configdat* "runs" "junit-test-reporter-xml"))
	 (junit-test-reporter	(configf:lookup *configdat* "runs" "junit-test-reporter-xml"))
	 (junit-test-report-dir  (configf:lookup *configdat* "runs" "junit-test-report-dir"))
	 (xml-dir		 (if (and junit-test-reporter (equal? junit-test-reporter "yes" ))
				     (if junit-test-report-dir
					 junit-test-report-dir
					 (conc (getenv "MT_LINKTREE") "/" (getenv "MT_TARGET") "/" (getenv "MT_RUNNAME")))
				     #f))
	 (xml-dir		(if (and junit-test-reporter (equal? junit-test-reporter "yes" ))
				    (if junit-test-report-dir
					junit-test-report-dir
					(conc (getenv "MT_LINKTREE") "/" (getenv "MT_TARGET") "/" (getenv "MT_RUNNAME")))
				    #f))
	 (xml-ts-name		(if xml-dir
				    (conc (getenv "MT_TESTSUITENAME")"."(string-translate (getenv "MT_TARGET") "/" ".") "." (getenv "MT_RUNNAME"))
				    #f))
         (keyname               (if xml-ts-name
         (keyname               (if xml-ts-name (common:get-signature xml-ts-name) #f))
				    (common:get-signature xml-ts-name)
				    #f))
	 (xml-path		(if xml-dir
				    (conc xml-dir "/" keyname ".xml")
				    #f))

	 (test-data		(if xml-dir
				    (rmt:get-tests-for-run run-id "%" '() '() ;; run-id testpatt states statuses
							   #f #f ;; offset limit

			 (tc-name	(conc test-name (if (and test-itempath (not (equal? test-itempath ""))) (conc "." (string-translate test-itempath "/" "." )) "")))
			 (test-state	(vector-ref test 3))
			 (comment	(vector-ref test 14))   
			 (test-status	(vector-ref test 4))
			 (exc-msg	(conc "No bucket for State " test-state " Status " test-status))
			 (new-doc	(cond 
						((member test-state (list "RUNNING" ))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name)) (inProgress (@ (type "inProgress")))))) doc))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name)) (inProgress)))) doc))
						((member test-state (list "LAUNCHED" "REMOTEHOSTSTART"  "NOT_STARTED"))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name)) (inProgress (@ (type "inQueue")))))) doc))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name)) (inQueue)))) doc))
						((member test-status (list "PASS" "WARN" "WAIVED"))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name))))) doc))
						((member test-status (list "FAIL" "CHECK"))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name)) (failure (@ (message ,comment) (type "failure")))))) doc)) 
						((member test-status (list "DEAD" "KILLED" "ABORT" "PREQ_FAIL" "PREQ_DISCARDED"))
							((sxml-modify `("testsuite" insert-into (testcase (@ (name ,tc-name)) (failure (@ (message ,comment) (type "error")))))) doc))
						((member test-status (list "SKIP"))

  unset ${var}
done
cd $1
shift
export PATH="$1:$PATH"
shift 

"$@"
exec "$@"