;; Copyright 2006-2011, Matthew Welland.
;;
;; This program is made available under the GNU GPL version 2.0 or
;; greater. See the accompanying file COPYING for details.
;;
;; This program is distributed WITHOUT ANY WARRANTY; without even the
;; implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;; PURPOSE.
;;======================================================================
;; launch a task - this runs on the originating host, tests themselves
;;
;;======================================================================
(use regex regex-case base64 sqlite3 srfi-18)
(import (prefix base64 base64:))
(import (prefix sqlite3 sqlite3:))
(declare (unit launch))
(declare (uses common))
(declare (uses configf))
(declare (uses db))
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
;;======================================================================
;; ezsteps
;;======================================================================
;; ezsteps were going to be coded as
;; stepname[,predstep1,predstep2 ...] [{VAR1=first,second,third}] command to execute
;; BUT
;; now are
;; stepname {VAR=first,second,third ...} command ...
;; where the {VAR=first,second,third ...} is optional.
;; given an exit code and whether or not logpro was used calculate OK/BAD
;; return #t if we are ok, #f otherwise
(define (steprun-good? logpro exitcode)
(or (eq? exitcode 0)
(and logpro (eq? exitcode 2))))
(define (launch:execute encoded-cmd)
(let* ((cmdinfo (read (open-input-string (base64:base64-decode encoded-cmd)))))
(setenv "MT_CMDINFO" encoded-cmd)
(if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
(let* ((testpath (assoc/default 'testpath cmdinfo))
(work-area (assoc/default 'work-area cmdinfo))
(test-name (assoc/default 'test-name cmdinfo))
(runscript (assoc/default 'runscript cmdinfo))
(ezsteps (assoc/default 'ezsteps cmdinfo))
(db-host (assoc/default 'db-host cmdinfo))
(run-id (assoc/default 'run-id cmdinfo))
(test-id (assoc/default 'test-id cmdinfo))
(itemdat (assoc/default 'itemdat cmdinfo))
(env-ovrd (assoc/default 'env-ovrd cmdinfo))
(set-vars (assoc/default 'set-vars cmdinfo)) ;; pre-overrides from -setvar
(runname (assoc/default 'runname cmdinfo))
(megatest (assoc/default 'megatest cmdinfo))
(mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
(fullrunscript (if runscript (conc testpath "/" runscript) #f))
(db #f)
(rollup-status 0))
(debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
(change-directory testpath)
;; apply pre-overrides before other variables. The pre-override vars must not
;; clobbers things from the official sources such as megatest.config and runconfigs.config
(if (string? set-vars)
(let ((varpairs (string-split set-vars ",")))
(debug:print 4 "varpairs: " varpairs)
(map (lambda (varpair)
(let ((varval (string-split varpair "=")))
(if (eq? (length varval) 2)
(let ((var (car varval))
(val (cadr varval)))
(debug:print 1 "Adding pre-var/val " var " = " val " to the environment")
(setenv var val)))))
varpairs)))
(setenv "MT_TEST_RUN_DIR" work-area)
(setenv "MT_TEST_NAME" test-name)
(setenv "MT_ITEM_INFO" (conc itemdat))
(setenv "MT_RUNNAME" runname)
(setenv "MT_MEGATEST" megatest)
(if mt-bindir-path (setenv "PATH" (conc (getenv "PATH") ":" mt-bindir-path)))
(if (not (setup-for-run))
(begin
(debug:print 0 "Failed to setup, exiting")
(exit 1)))
;; now can find our db
(set! db (open-db))
(if (not (args:get-arg "-server"))
(server:client-setup db))
;; (set! *cache-on* #t)
(set-megatest-env-vars db run-id) ;; these may be needed by the launching process
(change-directory work-area)
(set-run-config-vars db run-id)
;; environment overrides are done *before* the remaining critical envars.
(alist->env-vars env-ovrd)
(set-megatest-env-vars db run-id)
(set-item-env-vars itemdat)
(save-environment-as-files "megatest")
(test-set-meta-info db run-id test-name itemdat)
(test-set-status! db test-id "REMOTEHOSTSTART" "n/a" (args:get-arg "-m") #f)
(if (args:get-arg "-xterm")
(set! fullrunscript "xterm")
(if (and fullrunscript (not (file-execute-access? fullrunscript)))
(system (conc "chmod ug+x " fullrunscript))))
;; We are about to actually kick off the test
;; so this is a good place to remove the records for
;; any previous runs
;; (db:test-remove-steps db run-id testname itemdat)
;; from here on out we will open and close the db
;; on every access to reduce the probablitiy of
;; contention or stuck access on nfs.
(sqlite3:finalize! db)
(let* ((m (make-mutex))
(kill-job? #f)
(exit-info (vector #t #t #t))
(job-thread #f)
(runit (lambda ()
;; (let-values
;; (((pid exit-status exit-code)
;; (run-n-wait fullrunscript)))
;; if there is a runscript do it first
(if fullrunscript
(let ((pid (process-run fullrunscript)))
(let loop ((i 0))
(let-values
(((pid-val exit-status exit-code) (process-wait pid #t)))
(mutex-lock! m)
(vector-set! exit-info 0 pid)
(vector-set! exit-info 1 exit-status)
(vector-set! exit-info 2 exit-code)
(set! rollup-status exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(loop (+ i 1)))
)))))
;; then, if runscript ran ok (or did not get called)
;; do all the ezsteps (if any)
(if ezsteps
(let* ((testconfig (read-config (conc work-area "/testconfig") #f #t environ-patt: "pre-launch-env-vars")) ;; FIXME??? is allow-system ok here?
(ezstepslst (hash-table-ref/default testconfig "ezsteps" '()))
(db (open-db)))
(if (not (args:get-arg "-server"))
(server:client-setup db))
(if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
;; check exit-info (vector-ref exit-info 1)
(if (vector-ref exit-info 1)
(let* ((stepname (car ezstep)) ;; do stuff to run the step
(stepinfo (cadr ezstep))
(stepparts (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
(stepparms (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each
(stepcmd (list-ref stepparts 3))
(script "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!
(logpro-used #f))
;; NB// can safely assume we are in test-area directory
(debug:print 4 "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
" stepparms: " stepparms " stepcmd: " stepcmd)
(if (file-exists? (conc stepname ".logpro"))(set! logpro-used #t))
;; ;; first source the previous environment
;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh")
;; (get-environment-variable "SHELL")) ".csh" ".sh"))))
;; (if (and prevstep (file-exists? prev-env))
;; (set! script (conc script "source " prev-env))))
;; call the command using mt_ezstep
(set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))
(debug:print 4 "script: " script)
(rdb:teststep-set-status! db test-id stepname "start" "-" itemdat #f #f)
;; now launch
(let ((pid (process-run script)))
(let processloop ((i 0))
(let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
(mutex-lock! m)
(vector-set! exit-info 0 pid)
(vector-set! exit-info 1 exit-status)
(vector-set! exit-info 2 exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(processloop (+ i 1))))
))
(let ((exinfo (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") "")))
;; testing if procedures called in a remote call cause problems (ans: no or so I suspect)
(rdb:teststep-set-status! db test-id stepname "end" exinfo itemdat #f logfna))
(if logpro-used
(rdb:test-set-log! db test-id (conc stepname ".html")))
;; set the test final status
(let* ((this-step-status (cond
((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
((eq? (vector-ref exit-info 2) 0) 'pass)
(else 'fail)))
(overall-status (cond
((eq? rollup-status 2) 'warn)
((eq? rollup-status 0) 'pass)
(else 'fail)))
(next-status (cond
((eq? overall-status 'pass) this-step-status)
((eq? overall-status 'warn)
(if (eq? this-step-status 'fail) 'fail 'warn))
(else 'fail))))
(debug:print 4 "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used
" this-step-status: " this-step-status " overall-status: " overall-status
" next-status: " next-status " rollup-status: " rollup-status)
(case next-status
((warn)
(set! rollup-status 2)
;; NB// test-set-status! does rdb calls under the hood
(test-set-status! db test-id "RUNNING" "WARN"
(if (eq? this-step-status 'warn) "Logpro warning found" #f)
#f))
((pass)
(test-set-status! db test-id "RUNNING" "PASS" #f #f))
(else ;; 'fail
(set! rollup-status 1) ;; force fail
(test-set-status! db test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
))))
(if (and (steprun-good? logpro-used (vector-ref exit-info 2))
(not (null? tal)))
(loop (car tal) (cdr tal) stepname)))
(debug:print 4 "WARNING: a prior step failed, stopping at " ezstep))))))))
(monitorjob (lambda ()
(let* ((start-seconds (current-seconds))
(calc-minutes (lambda ()
(inexact->exact
(round
(-
(current-seconds)
start-seconds)))))
(kill-tries 0))
(let loop ((minutes (calc-minutes)))
(let* ((db (open-db))
(cpuload (get-cpu-load))
(diskfree (get-df (current-directory)))
(tmpfree (get-df "/tmp")))
(if (not (args:get-arg "-server"))
(server:client-setup db))
(if (not cpuload) (begin (debug:print 0 "WARNING: CPULOAD not found.") (set! cpuload "n/a")))
(if (not diskfree) (begin (debug:print 0 "WARNING: DISKFREE not found.") (set! diskfree "n/a")))
(set! kill-job? (test-get-kill-request db run-id test-name itemdat))
(rdb:test-update-meta-info db test-id minutes cpuload diskfree tmpfree)
(if kill-job?
(begin
(mutex-lock! m)
(let* ((pid (vector-ref exit-info 0)))
(if (number? pid)
(begin
(debug:print 0 "WARNING: Request received to kill job (attempt # " kill-tries ")")
(let ((processes (cmd-run->list (conc "pgrep -l -P " pid))))
(for-each
(lambda (p)
(let* ((parts (string-split p))
(p-id (if (> (length parts) 0)
(string->number (car parts))
#f)))
(if p-id
(begin
(debug:print 0 "Killing " (cadr parts) "; kill -9 " p-id)
(system (conc "kill -9 " p-id))))))
(car processes))
(system (conc "kill -9 " pid))))
(begin
(debug:print 0 "WARNING: Request received to kill job but problem with process, attempting to kill manager process")
(test-set-status! db test-id "KILLED" "FAIL"
(args:get-arg "-m") #f)
(sqlite3:finalize! db)
(exit 1))))
(set! kill-tries (+ 1 kill-tries))
(mutex-unlock! m)))
(sqlite3:finalize! db)
(thread-sleep! (+ 10 (random 10))) ;; add some jitter to the call home time to spread out the db accesses
(loop (calc-minutes)))))))
(th1 (make-thread monitorjob))
(th2 (make-thread runit)))
(set! job-thread th2)
(thread-start! th1)
(thread-start! th2)
(thread-join! th2)
(mutex-lock! m)
(set! db (open-db))
(if (not (args:get-arg "-server"))
(server:client-setup db))
(let* ((item-path (item-list->path itemdat))
(testinfo (rdb:get-test-info db run-id test-name item-path)))
(if (not (equal? (db:test-get-state testinfo) "COMPLETED"))
(begin
(debug:print 2 "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
(test-set-status! db test-id
(if kill-job? "KILLED" "COMPLETED")
;; Old logic:
;; (if (vector-ref exit-info 1) ;; look at the exit-status, #t means it at least ran
;; (if (and (not kill-job?)
;; (eq? (vector-ref exit-info 2) 0)) ;; we can now use rollup-status instead
;; "PASS"
;; "FAIL")
;; "FAIL")
;; New logic based on rollup-status
(cond
((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
((eq? rollup-status 0)
;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
((eq? rollup-status 1) "FAIL")
((eq? rollup-status 2)
;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
(if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
(else "FAIL"))
(args:get-arg "-m") #f)))
;; for automated creation of the rollup html file this is a good place...
(if (not (equal? item-path ""))
(tests:summarize-items db run-id test-name #f)) ;; don't force - just update if no
)
(mutex-unlock! m)
;; (exec-results (cmd-run->list fullrunscript)) ;; (list ">" (conc test-name "-run.log"))))
;; (success exec-results)) ;; (eq? (cadr exec-results) 0)))
(debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area "
work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
(sqlite3:finalize! db)
(if (not (vector-ref exit-info 1))
(exit 4)))))))
;; set up the very basics needed for doing anything here.
(define (setup-for-run)
;; would set values for KEYS in the environment here for better support of env-override but
;; have chicken/egg scenario. need to read megatest.config then read it again. Going to
;; pass on that idea for now.
(set! *configinfo* (find-and-read-config (if (args:get-arg "-config")(args:get-arg "-config") "megatest.config") environ-patt: "env-override"))
(set! *configdat* (if (car *configinfo*)(car *configinfo*) #f))
(set! *toppath* (if (car *configinfo*)(cadr *configinfo*) #f))
(if *toppath*
(setenv "MT_RUN_AREA_HOME" *toppath*) ;; to be deprecated
(debug:print 0 "ERROR: failed to find the top path to your run setup."))
*toppath*)
(define (get-best-disk confdat)
(let* ((disks (hash-table-ref/default confdat "disks" #f))
(best #f)
(bestsize 0))
(if disks
(for-each
(lambda (disk-num)
(let* ((dirpath (cadr (assoc disk-num disks)))
(freespc (if (and (directory? dirpath)
(file-write-access? dirpath))
(get-df dirpath)
(begin
(debug:print 0 "WARNING: path " dirpath " in [disks] section not valid or writable")
0))))
(if (> freespc bestsize)
(begin
(set! best dirpath)
(set! bestsize freespc)))))
(map car disks)))
(if best
best
(begin
(debug:print 0 "ERROR: No valid disks found in megatest.config. Please add some to your [disks] section")
(exit 1)))))
;; Desired directory structure:
;;
;; <linkdir> - <target> - <testname> -.
;; |
;; v
;; <rundir> - <target> - <testname> -|- <itempath(s)>
;;
;; dir stored in test is:
;;
;; <linkdir> - <target> - <testname> [ - <itempath> ]
;;
;; All log file links should be stored relative to the top of link path
;;
;; <target> - <testname> [ - <itempath> ]
;;
(define (create-work-area db run-id test-path disk-path testname itemdat)
(let* ((run-info (db:get-run-info db run-id))
(item-path (item-list->path itemdat))
(runname (db:get-value-by-header (db:get-row run-info)
(db:get-header run-info)
"runname"))
(key-vals (rdb:get-key-vals db run-id))
(target (string-intersperse key-vals "/"))
;; nb// if itempath is not "" then it is prefixed with "/"
(dfullp (conc disk-path "/" target "/" runname "/" testname (if (equal? item-path "") "/" "") item-path))
;; ensure this exists first as links to subtests must be created there
(toptest-path (conc disk-path "/" target "/" runname "/" testname))
(linktree (let ((rd (config-lookup *configdat* "setup" "linktree")))
(if rd rd (conc *toppath* "/runs"))))
(lnkpath (conc linktree "/" target "/" runname item-path)))
(if (not (file-exists? linktree))
(begin
(debug:print 0 "WARNING: linktree did not exist! Creating it now at " linktree)
(create-directory linktree #t))) ;; (system (conc "mkdir -p " linktree))))
;; since this is an iterated test this is as good a place as any to
;; update the toptest record with its location rundir
(if (not (equal? item-path ""))
(db:test-set-rundir! db run-id testname "" toptest-path))
(debug:print 2 "Setting up test run area")
(debug:print 2 " - creating run area in " dfullp)
(create-directory dfullp #t) ;; (system (conc "mkdir -p " dfullp))
(debug:print 2 " - creating link from " dfullp "/" testname " to " lnkpath)
(create-directory lnkpath #t) ;; (system (conc "mkdir -p " lnkpath))
;; I suspect this section was deleting test directories under some
;; wierd sitations? This doesn't make sense - reenabling the rm -f
(let ((testlink (conc lnkpath "/" testname)))
(if (and (file-exists? testlink)
(or (regular-file? testlink)
(symbolic-link? testlink)))
(system (conc "rm -f " testlink)))
(system (conc "ln -sf " dfullp " " testlink)))
(if (directory? dfullp)
(begin
(let* ((cmd (conc "rsync -av" (if (> *verbosity* 1) "" "q") " " test-path "/ " dfullp "/"))
(status (system cmd)))
(if (not (eq? status 0))
(debug:print 2 "ERROR: problem with running \"" cmd "\"")))
(list dfullp toptest-path)
;; (list lnkpath toptest-path)
)
(list #f #f))))
;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area
;; 4. remotely run the test on allocated host
;; - could be ssh to host from hosts table (update regularly with load)
;; - could be netbatch
;; (launch-test db (cadr status) test-conf))
(define (launch-test db run-id runname test-conf keyvallst test-name test-path itemdat params)
(change-directory *toppath*)
(let* ((useshell (config-lookup *configdat* "jobtools" "useshell"))
(launcher (config-lookup *configdat* "jobtools" "launcher"))
(runscript (config-lookup test-conf "setup" "runscript"))
(ezsteps (> (length (hash-table-ref/default test-conf "ezsteps" '())) 0)) ;; don't send all the steps, could be big
(diskspace (config-lookup test-conf "requirements" "diskspace"))
(memory (config-lookup test-conf "requirements" "memory"))
(hosts (config-lookup *configdat* "jobtools" "workhosts"))
(remote-megatest (config-lookup *configdat* "setup" "executable"))
;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to
;; allow running from dashboard. Extract the path
;; from the called megatest and convert dashboard
;; or dboard to megatest
(local-megatest (let* ((lm (car (argv)))
(dir (pathname-directory lm))
(exe (pathname-strip-directory lm)))
(conc (if dir (conc dir "/") "")
(case (string->symbol exe)
((dboard) "megatest")
((dashboard) "megatest")
(else exe)))))
(test-sig (conc test-name ":" (item-list->path itemdat))) ;; test-path is the full path including the item-path
(work-area #f)
(toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
(diskpath #f)
(cmdparms #f)
(fullcmd #f) ;; (define a (with-output-to-string (lambda ()(write x))))
(mt-bindir-path #f)
(item-path (item-list->path itemdat))
(testinfo (rdb:get-test-info db run-id test-name item-path))
(test-id (db:test-get-id testinfo)))
(if hosts (set! hosts (string-split hosts)))
;; set the megatest to be called on the remote host
(if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
(set! mt-bindir-path (pathname-directory remote-megatest))
(if launcher (set! launcher (string-split launcher)))
;; set up the run work area for this test
(set! diskpath (get-best-disk *configdat*))
(if diskpath
(let ((dat (create-work-area db run-id test-path diskpath test-name itemdat)))
(set! work-area (car dat))
(set! toptest-work-area (cadr dat)))
(begin
(set! work-area (conc test-path "/tmp_run"))
(create-directory work-area #t)
(debug:print 0 "WARNING: No disk work area specified - running in the test directory under tmp_run")))
(set! cmdparms (base64:base64-encode (with-output-to-string
(lambda () ;; (list 'hosts hosts)
(write (list (list 'testpath test-path)
(list 'work-area work-area)
(list 'test-name test-name)
(list 'runscript runscript)
(list 'run-id run-id )
(list 'test-id test-id )
(list 'itemdat itemdat )
(list 'megatest remote-megatest)
(list 'ezsteps ezsteps)
(list 'env-ovrd (hash-table-ref/default *configdat* "env-override" '()))
(list 'set-vars (if params (hash-table-ref/default params "-setvars" #f)))
(list 'runname runname)
(list 'mt-bindir-path mt-bindir-path))))))) ;; (string-intersperse keyvallst " "))))
;; clean out step records from previous run if they exist
(db:delete-test-step-records db run-id test-name itemdat)
(change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
(cond
((and launcher hosts) ;; must be using ssh hostname
(set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
(launcher
(set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
(else
(if (not useshell)(debug:print 0 "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
(set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
(if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
(debug:print 1 "Launching megatest for test " test-name " in " work-area" ...")
(test-set-status! db test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
(debug:print 4 "fullcmd: " fullcmd)
(let* ((commonprevvals (alist->env-vars
(hash-table-ref/default *configdat* "env-override" '())))
(testprevvals (alist->env-vars
(hash-table-ref/default test-conf "pre-launch-env-overrides" '())))
(miscprevvals (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
(append (list (list "MT_TEST_NAME" test-name)
(list "MT_ITEM_INFO" (conc itemdat))
(list "MT_RUNNAME" runname))
itemdat)))
(launch-results (apply cmd-run-proc-each-line
(if useshell
(string-intersperse fullcmd " ")
(car fullcmd))
print
(if useshell
'()
(cdr fullcmd))))) ;; launcher fullcmd)));; (apply cmd-run-proc-each-line launcher print fullcmd))) ;; (cmd-run->list fullcmd))
(debug:print 2 "Launching completed, updating db")
(debug:print 2 "Launch results: " launch-results)
(if (not launch-results)
(begin
(print "ERROR: Failed to run " (string-intersperse fullcmd " ") ", exiting now")
(sqlite3:finalize! db)
;; good ole "exit" seems not to work
;; (_exit 9)
;; but this hack will work! Thanks go to Alan Post of the Chicken email list
;; NB// Is this still needed? Should be safe to go back to "exit" now?
(process-signal (current-process-id) signal/kill)
))
(alist->env-vars miscprevvals)
(alist->env-vars testprevvals)
(alist->env-vars commonprevvals)
launch-results)))