Megatest

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfig
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  -runname                : required, name for this particular test run
  -state                  : Applies to runs, tests or steps depending on context
  -status                 : Applies to runs, tests or steps depending on context
  -mode key               : load testpatt from <key> in runconfigs instead of default TESTPATT
  -tagexpr tag1,tag2%,..  : select tests with tags matching expression

Test helpers (for use inside tests)
  -step stepname
  -test-status            : set the state and status of a test (use :state and :status)
  -setlog logfname        : set the path/filename to the final log relative to the test
                            directory. may be used with -test-status
  -set-toplog logfname    : set the overall log for a suite of sub-tests

  -load-test-data         : read test specific data for storage in the test_data table
                            from standard in. Each line is comma delimited with four
                            fields category,variable,value,comment

Queries
  -list-runs patt         : list runs matching pattern \"patt\", % is the wildcard
  -show-keys              : show the keys used in this megatest setup
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/%... 
  -test-files targpatt    : get the most recent test path/file matching targpatt e.g. %/% or '*.log'
                            returns list sorted by age ascending, see examples below
  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file

			":runname"
			"-runname"
			":state"  
			"-state"
			":status"
			"-status"
			"-list-runs"
			"-testpatt" 
			"-testpatt"
                        "-mode"
                        "-tagexpr"
			"-itempatt"
			"-setlog"
			"-set-toplog"
			"-runstep"
			"-logpro"
			"-m"
			"-rerun"

(let ((targ (or (args:get-arg "-reqtarg")(args:get-arg "-target"))))
  (if targ (setenv "MT_TARGET" targ)))

;; The watchdog is to keep an eye on things like db sync etc.
;;
(define *watchdog* (make-thread common:watchdog "Watchdog thread"))

(if (not (args:get-arg "-server"))
(thread-start! *watchdog*)
    (thread-start! *watchdog*)) ;; if starting a server; wait till we get to running state before kicking off watchdog
;;(BB> "thread-start! watchdog")

(if (args:get-arg "-log")
    (let ((oup (open-output-file (args:get-arg "-log"))))
      (debug:print-info 0 *default-log-port* "Sending log output to " (args:get-arg "-log"))
      (set! *default-log-port* oup)))

(if (or (args:get-arg "-h")

	  (exit))))

;;======================================================================
;; Weird special calls that need to run *after* the server has started?
;;======================================================================

(if (args:get-arg "-list-targets")
    (if (launch:setup)
    (let ((targets (common:get-runconfig-targets)))
      (debug:print 1 *default-log-port* "Found "(length targets) " targets")
      (case (string->symbol (or (args:get-arg "-dumpmode") "alist"))
	((alist)
	 (for-each (lambda (x)
		     ;; (print "[" x "]"))
		     (print x))
		   targets))
	((json)
	 (json-write targets))
	(else
	 (debug:print-error 0 *default-log-port* "dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets")))
      (set! *didsomething* #t)))
        (let ((targets (common:get-runconfig-targets)))
          (debug:print 1 *default-log-port* "Found "(length targets) " targets")
          (case (string->symbol (or (args:get-arg "-dumpmode") "alist"))
            ((alist)
             (for-each (lambda (x)
                         ;; (print "[" x "]"))
                         (print x))
                       targets))
            ((json)
             (json-write targets))
            (else
             (debug:print-error 0 *default-log-port* "dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets")))
          (set! *didsomething* #t))))

;; cache the runconfigs in $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME/.runconfig
;;
(define (full-runconfigs-read)
;; in the envprocessing branch the below code replaces the further below code
;;  (if (eq? *configstatus* 'fulldata)
;;      *runconfigdat*

	       ;; (if (args:get-arg "-testpatt") 
	       ;;  	        (args:get-arg "-testpatt") 
	       ;;  	        "%"))
	       (keys        (rmt:get-keys)) ;; (db:get-keys dbstruct))
	       ;; (runsdat  (db:get-runs dbstruct runpatt #f #f '()))
	;; (runsdat     (rmt:get-runs-by-patt keys (or runpatt "%") (common:args-get-target) ;; (db:get-runs-by-patt dbstruct keys (or runpatt "%") (common:args-get-target)
	;; 		           	 #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0))
	       (runsdat     (db:dispatch-query access-mode rmt:get-runs-by-patt db:get-runs-by-patt keys (or runpatt "%") 
                                            (common:args-get-target) #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0))
	       (runsdat     (rmt:get-runs-by-patt keys (or runpatt "%") 
                                                  (common:args-get-target) #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0))
	       (runstmp     (db:get-rows runsdat))
	       (header      (db:get-header runsdat))
	       ;; this is "-since" support. This looks at last mod times of <run-id>.db files
	       ;; and collects those modified since the -since time.
	       (runs        runstmp)
	       (runs        (if (and (not (null? runstmp))
				     (args:get-arg "-since"))
				(let ((changed-ids (db:get-changed-run-ids (string->number (args:get-arg "-since")))))
				  (let loop ((hed (car runstmp))
					     (tal (cdr runstmp))
					     (res '()))
				    (let ((new-res (if (member (db:get-value-by-header hed header "id") changed-ids)
						       (cons hed res)
						       res)))
				      (if (null? tal)
					  (reverse new-res)
					  (loop (car tal)(cdr tal) new-res)))))
				runstmp))
                        ;; (if (and (not (null? runstmp))
			;;        (args:get-arg "-since"))
			;;   (let ((changed-ids (db:get-changed-run-ids (string->number (args:get-arg "-since")))))
			;;     (let loop ((hed (car runstmp))
			;;   	     (tal (cdr runstmp))
			;;   	     (res '()))
			;;       (let ((new-res (if (member (db:get-value-by-header hed header "id") changed-ids)
			;;   		       (cons hed res)
			;;   		       res)))
			;;         (if (null? tal)
			;;   	  (reverse new-res)
			;;   	  (loop (car tal)(cdr tal) new-res)))))
			;;   runstmp))
	       (db-targets  (args:get-arg "-list-db-targets"))
	       (seen        (make-hash-table))
	       (dmode       (let ((d (args:get-arg "-dumpmode")))
			      (if d (string->symbol d) #f)))
	       (data        (make-hash-table))
	       (fields-spec (if (args:get-arg "-fields")
				(extract-fields-constraints (args:get-arg "-fields"))

		(debug:print 0 *default-log-port* "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (rmt:get-keys))
		 ;; db:test-get-paths must not be run remote
		 (paths    (tests:test-get-paths-matching keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)
	    (for-each (lambda (path)
			(if (file-exists? path)
			(print path))
			(print path)))	
		      paths)))
	;; else do a general-run-call
	(general-run-call 
	 "-test-files"
	 "Get paths to test"
	 (lambda (target runname keys keyvals)
	   (let* ((db       #f)

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      (let ((dbstruct (db:setup *toppath*)))
      (common:cleanup-db)
        (common:cleanup-db dbstruct))
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 *default-log-port* "Failed to setup, exiting")

(if (args:get-arg "-update-meta")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      ;; now can find our db
      ;; keep this one local
      (open-run-close runs:update-all-test_meta #f)
      (runs:update-all-test_meta #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Start a repl
;;======================================================================

;; fakeout readline

          (debug:print 0 *default-log-port* "Failed to create HTML output in " toppath "/lt/runs-index.html"))
      (set! *didsomething* #t)))

;;======================================================================
;; Exit and clean up
;;======================================================================

(if *runremote* (close-all-connections!)) ;; for http-client

(if (not *didsomething*)
    (debug:print 0 *default-log-port* help))
;;(BB> "thread-join! watchdog")

;; join the watchdog thread if it has been thread-start!ed  (it may not have been started in the case of a server that never enters running state)
;;   (symbols returned by thread-state: created ready running blocked suspended sleeping terminated dead)
(if (thread? *watchdog*)
    (case (thread-state *watchdog*)
      ((ready running blocked sleeping terminated dead)
       (thread-join! *watchdog*))))

(set! *time-to-exit* #t)
(thread-join! *watchdog*)

(if (not (eq? *globalexitstatus* 0))
    (if (or (args:get-arg "-run")(args:get-arg "-runtests")(args:get-arg "-runall"))
        (begin
           (debug:print 0 *default-log-port* "NOTE: Subprocesses with non-zero exit code detected: " *globalexitstatus*)
           (exit 0))
        (case *globalexitstatus*
         ((0)(exit 0))
         ((1)(exit 1))
         ((2)(exit 2))
         (else (exit 3)))))