Megatest

(declare (uses db))
(declare (uses common))
(declare (uses items))
(declare (uses runconfig))
(declare (uses tests))
(declare (uses server))
(declare (uses mt))
;; (declare (uses filedb))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "test_records.scm")

	  (toppath     *toppath*)
	  (envdat      keyvals) ;; initial values start with keyvals
	  (runconfig   #f)
	  (serverdat   (if (args:get-arg "-server")
			   *runremote*
			   #f)) ;; to be used later
	  (transport   (or (args:get-arg "-transport") 'http))
	  (db          (if (and mconfig
				(or (args:get-arg "-server")
				    (eq? transport 'fs)))
			   (open-db)
			   #f))
	  (run-id      #f))
    ;; Set all the environment vars we know so far, start with keys
    (for-each (lambda (keyval)
		(setenv (car keyval)(cadr keyval)))
	      keyvals)
    ;; Set up various and sundry known vars here
    (setenv "MT_RUN_AREA_HOME" toppath)
    (setenv "MT_RUNNAME" runname)
    (setenv "MT_TARGET"  target)
    (setenv "MT_TESTSUITENAME" (common:get-testsuite-name))
    (set! envdat (append 
		  envdat
		  (list (list "MT_RUN_AREA_HOME" toppath)
			(list "MT_RUNNAME"       runname)
			(list "MT_TARGET"        target))))
    ;; Now can read the runconfigs file
    ;; 
    (set! runconfig (read-config (conc  *toppath* "/runconfigs.config") #f #t sections: (list "default" target)))
    (if (not (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f))
	(begin
	  (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
	  (if db (sqlite3:finalize! db))
	  (exit 1)))
    ;; Now have runconfigs data loaded, set environment vars
    (for-each (lambda (section)
		(for-each (lambda (varval)
			    (set! envdat (append envdat (list varval)))
			    (setenv (car varval)(cadr varval)))
			    (safe-setenv (car varval)(cadr varval)))
			  (configf:get-section runconfig section)))
	      (list "default" target))
    (vector target runname testpatt keys keyvals envdat mconfig runconfig serverdat transport db toppath run-id)))

(define (runs:set-megatest-env-vars run-id #!key (inkeys #f)(inrunname #f)(inkeyvals #f))
  (let* ((target    (or (common:args-get-target)
			(get-environment-variable "MT_TARGET")))
	 (keys      (if inkeys    inkeys    (cdb:remote-run db:get-keys #f)))
	 (keys    (if inkeys    inkeys    (rmt:get-keys)))
	 (keyvals   (if inkeyvals inkeyvals (keys:target->keyval keys target)))
	 (vals      (hash-table-ref/default *env-vars-by-run-id* run-id #f))
	 (link-tree (configf:lookup *configdat* "setup" "linktree")))
    ;; get the info from the db and put it in the cache
    (if link-tree
	(setenv "MT_LINKTREE" link-tree)
	(debug:print 0 "ERROR: linktree not set, should be set in megatest.config in [setup] section."))
    (if (not vals)
	(let ((ht (make-hash-table)))
	  (hash-table-set! *env-vars-by-run-id* run-id ht)
	  (set! vals ht)
	  (for-each
	   (lambda (key)
	     (hash-table-set! vals (car key) (cadr key))) ;; (cdb:remote-run db:get-run-key-val #f run-id (car key))))
	     (hash-table-set! vals (car key) (cadr key)))
	   keyvals)))
    ;; from the cached data set the vars
    (hash-table-for-each
     vals
     (lambda (key val)
       (debug:print 2 "setenv " key " " val)
       (if (and (string? key)
		(string? val))
	   (setenv key val)
       (safe-setenv key val)))
	   (debug:print 0 "ERROR: Malformed environment variable definition: var=" var ", val=" val))))
    (if (not (get-environment-variable "MT_TARGET"))(setenv "MT_TARGET" target))
    (alist->env-vars (hash-table-ref/default *configdat* "env-override" '()))
    ;; Lets use this as an opportunity to put MT_RUNNAME in the environment
    (let ((runname  (if inrunname inrunname (rmt:get-run-name-from-id run-id))))
      (if runname
    (setenv "MT_RUNNAME" (if inrunname inrunname (cdb:remote-run db:get-run-name-from-id #f run-id)))
	  (setenv "MT_RUNNAME" runname)
	  (debug:print 0 "ERROR: no value for runname for id " run-id)))
    (setenv "MT_RUN_AREA_HOME" *toppath*)))

(define (set-item-env-vars itemdat)
  (for-each (lambda (item)
	      (debug:print 2 "setenv " (car item) " " (cadr item))
	      (setenv (car item) (cadr item)))
	    itemdat))

;; Every time can-run-more-tests is called increment the delay
;;
;; NOTE: We run this server-side!! Do not use this global except in the runs:can-run-more-tests routine
;;
(define *last-num-running-tests* 0)
(define *runs:can-run-more-tests-count* 0)
(define (runs:shrink-can-run-more-tests-count) ;; the db is a dummy var so we can use cdb:remote-run
(define (runs:shrink-can-run-more-tests-count)
  (set! *runs:can-run-more-tests-count* 0)) ;; (/ *runs:can-run-more-tests-count* 2)))

;; Temporary globals. Move these into the logic or into common
;;
(define *seen-cant-run-tests* (make-hash-table)) ;; use to track tests that we suspect cannot be run
(define (runs:inc-cant-run-tests testname)
  (hash-table-set! *seen-cant-run-tests* testname
		   (+ (hash-table-ref/default *seen-cant-run-tests* testname 0) 1)))

(define (runs:can-keep-running? testname n)
  (< (hash-table-ref/default *seen-cant-run-tests* testname 0) n))

(define *runs:denoise* (make-hash-table)) ;; key => last-time-ran

(define (runs:lownoise key waitval)
  (let ((lasttime (hash-table-ref/default *runs:denoise* key 0))
	(currtime (current-seconds)))
    (if (> (- currtime lasttime) waitval)
	(begin
	  (hash-table-set! *runs:denoise* key currtime)
	  #t)
	#f)))

(define (runs:can-run-more-tests jobgroup max-concurrent-jobs)
  (thread-sleep! (cond
		  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
		  (else 0)))
  (let* ((num-running             (cdb:remote-run db:get-count-tests-running #f))
	 (num-running-in-jobgroup (cdb:remote-run db:get-count-tests-running-in-jobgroup #f jobgroup))
(define (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)
  ;;(thread-sleep! (cond
  ;;      	  ((> *runs:can-run-more-tests-count* 20) 2);; obviously haven't had any work to do for a while
  ;;      	  (else 0)))
  (let* ((num-running             (rmt:get-count-tests-running run-id))
	 (num-running-in-jobgroup (rmt:get-count-tests-running-in-jobgroup run-id jobgroup))
	 (job-group-limit         (let ((jobg-count (config-lookup *configdat* "jobgroups" jobgroup)))
				    (if (string? jobg-count)
					(string->number jobg-count)
					jobg-count))))
    (if (> (+ num-running num-running-in-jobgroup) 0)
	(set! *runs:can-run-more-tests-count* (+ *runs:can-run-more-tests-count* 1)))
    (if (not (eq? *last-num-running-tests* num-running))

				       (>= num-running-in-jobgroup job-group-limit))
				  (if (runs:lownoise (conc "maxjobgroup " jobgroup) 60)
				      (debug:print 1 "WARNING: number of jobs " num-running-in-jobgroup 
						   " in jobgroup \"" jobgroup "\" exceeds limit of " job-group-limit))
				  #t)
				 (else #f))))
	  (list (not can-not-run-more) num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)))))


;;  test-names: Comma separated patterns same as test-patts but used in selection 
;;              of tests to run. The item portions are not respected.
;;              FIXME: error out if /patt specified
;;            
(define (runs:run-tests target runname test-patts user flags #!key (run-count 3)) ;; test-names
  (common:clear-caches) ;; clear all caches
  (let* ((keys               (keys:config-get-fields *configdat*))
	 (keyvals            (keys:target->keyval keys target))
	 (run-id             (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (run-id             (rmt:register-run keyvals runname "new" "n/a" user))  ;;  test-name)))
	 (deferred          '()) ;; delay running these since they have a waiton clause
	 (runconfigf         (conc  *toppath* "/runconfigs.config"))
	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)) ;;(lset-intersection equal? (string-split test-patts ",") test-names))) ;; test-names)) ;; Added test-names as initial for required-tests but that failed to work
	 (required-tests     #f)  ;;(lset-intersection equal? (string-split test-patts ",") test-names))) ;; test-names)) ;; Added test-names as initial for required-tests but that failed to work
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 (tdbdat             (tasks:open-db)))

    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
    ;; Update the synchronous setting in the db based on the default or what is set by the user

    ;; This is done once here on a call to run tests rather than on every call to open-db
    (cdb:remote-run db:set-sync #f)
    (set-signal-handler! signal/int
			 (lambda (signum)
			   (signal-mask! signum)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (let ((tdbdat (tasks:open-db)))
			     (rmt:tasks-set-state-given-param-key task-key "killed"))
			   (print "Killed by signal " signum ". Exiting")
			   (exit)))

    ;; register this run in monitor.db
    (rmt:tasks-add "run-tests" user target runname test-patts task-key) ;; params)
    (rmt:tasks-set-state-given-param-key task-key "running")
    (runs:set-megatest-env-vars run-id inkeys: keys inrunname: runname) ;; these may be needed by the launching process
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals target)
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))

    ;; Now generate all the tests lists
    (set! all-tests-registry (tests:get-all))

    (debug:print-info 0 "all tests:  " (string-intersperse (sort all-test-names string<) " "))
    (debug:print-info 0 "test names: " (string-intersperse (sort test-names string<) " "))

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)
	(begin
	  ;; Is this still necessary? I think not. Unreachable tests are marked as such and 
	  ;; should not cause problems here.
	  ;;
	  ;; have to delete test records where NOT_STARTED since they can cause -keepgoing to 
	  ;; get stuck due to becoming inaccessible from a failed test. I.e. if test B depends 
	  ;; on test A but test B reached the point on being registered as NOT_STARTED and test
	  ;; A failed for some reason then on re-run using -keepgoing the run can never complete.
	  ;;
	  (cdb:delete-tests-in-state *runremote* run-id "NOT_STARTED")
	  (cdb:remote-run db:set-tests-state-status #f run-id test-names #f "FAIL" "NOT_STARTED" "FAIL")))
	  ;; (rmt:general-call 'delete-tests-in-state run-id "NOT_STARTED")
	  
	  ;; Now convert FAIL and anything in allow-auto-rerun to NOT_STARTED
	  ;;
	  (for-each (lambda (state)
		      (rmt:set-tests-state-status run-id test-names state #f "NOT_STARTED" state))
		    (string-split (or (configf:lookup *configdat* "setup" "allow-auto-rerun") "")))))

    ;; Ensure all tests are registered in the test_meta table
    (runs:update-all-test_meta #f)

    ;; now add non-directly referenced dependencies (i.e. waiton)
    ;;======================================================================
    ;; refactoring this block into tests:get-full-data

    (if (not (null? required-tests))
	(debug:print-info 1 "Adding " required-tests " to the run queue"))
    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 "test-records=" (hash-table->alist test-records))
    (let ((reglen (configf:lookup *configdat* "setup" "runqueue")))
      (if (> (length (hash-table-keys test-records)) 0)
	  (let* ((keep-going #t)
		 (th1        (make-thread (lambda ()
					    (handle-exceptions
					     exn
	  (begin
	    (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests (any->number reglen) all-tests-registry)
					     (begin
					       (print-call-chain (current-error-port))
					       (debug:print 0 "ERROR: failure in runs:run-tests-queue thread, error: " ((condition-property-accessor 'exn 'message) exn)))
					     (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests (any->number reglen) all-tests-registry)))
					  "runs:run-tests-queue"))
		 (th2        (make-thread (lambda ()				    
					    ;; (rmt:find-and-mark-incomplete-all-runs))))) CAN'T INTERRUPT IT ...
					    (let ((run-ids (rmt:get-all-run-ids)))
					      (for-each (lambda (run-id)
							  (if keep-going
							      (rmt:find-and-mark-incomplete run-id #f))) ;; ovr-deadtime)))
							run-ids)))
					  "runs: mark-incompletes")))
	    (thread-start! th1)
	    (thread-start! th2)
	    (thread-join! th1)
	    (set! keep-going #f)
	    (thread-join! th2)
	    ;; if run-count > 0 call, set -preclean and -rerun STUCK/DEAD
	    (if (> run-count 0)
		(begin
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		  (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))))
	  (debug:print-info 0 "No tests to run")))
    (debug:print-info 4 "All done by here")
    (rmt:tasks-set-state-given-param-key task-key "done")
    ;; (sqlite3:finalize! tasks-db)
    ))


;; loop logic. These are used in runs:run-tests-queue to make it a bit more readable.
;;
;; If reg not full and have items in tal then loop with (car tal)(cdr tal) reg reruns
;; If reg is full (i.e. length >= n

	  '()
	  reg)))

(define runs:nothing-left-in-queue-count 0)

(define (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmap)
  (let* ((loop-list       (list hed tal reg reruns))
	 (prereqs-not-met (rmt:get-prereqs-not-met run-id waitons item-path testmode itemmap: itemmap))
	 (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 ;; (prereqs-not-met (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails           (runs:calc-fails prereqs-not-met))
	 (prereq-fails    (runs:calc-prereq-fail prereqs-not-met))
	 (non-completed   (runs:calc-not-completed prereqs-not-met))
	 (runnables       (runs:calc-runnable prereqs-not-met)))
    (debug:print-info 4 "START OF INNER COND #2 "
		      "\n can-run-more:    " can-run-more
		      "\n testname:        " hed

	(setenv "MT_TEST_NAME" test-name) ;; 
	(setenv "MT_RUNNAME"   runname)
	(runs:set-megatest-env-vars run-id inrunname: runname) ;; these may be needed by the launching process
	(let ((items-list (items:get-items-from-config tconfig)))
	  (if (list? items-list)
	      (begin
		(if (null? items-list)
		    (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name "")))
		      (mt:test-set-state-status-by-id test-id "NOT_STARTED" "ZERO_ITEMS" "Failed to run due to failed prerequisites")))
		    (let ((test-id (rmt:get-test-id run-id test-name "")))
		      (if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "ZERO_ITEMS" "Failed to run due to failed prerequisites"))))
		(tests:testqueue-set-items! test-record items-list)
		(list hed tal reg reruns))
	      (begin
		(debug:print 0 "ERROR: The proc from reading the items table did not yield a list - please report this")
		(exit 1))))))

     ((and (null? fails)

	(if (and give-up
		 (not (and (null? tal)(null? reg))))
	    (let ((trimmed-tal (mt:discard-blocked-tests run-id hed tal test-records))
		  (trimmed-reg (mt:discard-blocked-tests run-id hed reg test-records)))
	      (debug:print 1 "WARNING: test " hed " has discarded prerequisites, removing it from the queue")

	      (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
		(mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to discarded prerequisites"))
	      (let ((test-id (rmt:get-test-id run-id hed "")))
		(if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to discarded prerequisites")))
	      
	      (if (and (null? trimmed-tal)
		       (null? trimmed-reg))
		  #f
		  (list (runs:queue-next-hed trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-tal trimmed-tal trimmed-reg reglen regfull)
			(runs:queue-next-reg trimmed-tal trimmed-reg reglen regfull)
			reruns)))
	      (list (car newtal)(append (cdr newtal) reg) '() reruns))))

     ((and (null? fails)
	   (null? prereq-fails)
	   (null? non-completed))
      (if  (runs:can-keep-running? hed 5)
      (if  (runs:can-keep-running? hed 20)
	  (begin
	    (runs:inc-cant-run-tests hed)
	    (debug:print-info 1 "no fails in prerequisites for " hed " but also none running, keeping " hed " for now. Try count: " (hash-table-ref/default *seen-cant-run-tests* hed 0))
	    ;; getting here likely means the system is way overloaded, kill a full minute before continuing
	    (thread-sleep! 60)
	    ;; num-retries code was here
	    ;; we use this opportunity to move contents of reg to tal
	    (list (car newtal)(append (cdr newtal) reg) '() reruns)) ;; an issue with prereqs not yet met?
	  (begin
	    (debug:print-info 1 "no fails in prerequisites for " hed " but nothing seen running in a while, dropping test " hed " from the run queue")
	    (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
	      (mt:test-set-state-status-by-id test-id "NOT_STARTED" "TIMED_OUT" "Nothing seen running in a while."))
	    (let ((test-id (rmt:get-test-id run-id hed "")))
	      (if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "TIMED_OUT" "Nothing seen running in a while.")))
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  reruns))))

     ((and 
       (or (not (null? fails))
	   (not (null? prereq-fails)))
       (member 'normal testmode))
      (debug:print-info 1 "test "  hed " (mode=" testmode ") has failed prerequisite(s); "
			(string-intersperse (map (lambda (t)(conc (db:test-get-testname t) ":" (db:test-get-state t)"/"(db:test-get-status t))) fails) ", ")
			", removing it from to-do list")
      (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
	(if (not (null? prereq-fails))
	    (mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
	    (mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites")))
      (let ((test-id (rmt:get-test-id run-id hed "")))
	(if test-id
	    (if (not (null? prereq-fails))
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_DISCARDED" "Failed to run due to prior failed prerequisites")
		(mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL"      "Failed to run due to failed prerequisites"))))
      (if (or (not (null? reg))(not (null? tal)))
	  (begin
	    (hash-table-set! test-registry hed 'CANNOTRUN)
	    (list (runs:queue-next-hed tal reg reglen regfull)
		  (runs:queue-next-tal tal reg reglen regfull)
		  (runs:queue-next-reg tal reg reglen regfull)
		  (cons hed reruns)))

	      ((string? t)
	       t)
	      (else 
	       (conc t))))
	   inlst)))

(define (runs:process-expanded-tests hed tal reg reruns reglen regfull test-record runname test-name item-path jobgroup max-concurrent-jobs run-id waitons item-path testmode test-patts required-tests test-registry registry-mutex flags keyvals run-info newtal all-tests-registry itemmap)
  (let* ((run-limits-info         (runs:can-run-more-tests jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
  (let* ((run-limits-info         (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)) ;; look at the test jobgroup and tot jobs running
	 (have-resources          (car run-limits-info))
	 (num-running             (list-ref run-limits-info 1))
	 (num-running-in-jobgroup (list-ref run-limits-info 2)) 
	 (max-concurrent-jobs     (list-ref run-limits-info 3))
	 (job-group-limit         (list-ref run-limits-info 4))
	 (prereqs-not-met         (rmt:get-prereqs-not-met run-id waitons item-path testmode itemmap: itemmap))
	 (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 ;; (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails                   (runs:calc-fails prereqs-not-met))
	 (non-completed           (runs:calc-not-completed prereqs-not-met))
	 (loop-list               (list hed tal reg reruns))
	 ;; configure the load runner
	 (numcpus                 (common:get-num-cpus))
	 (maxload                 (string->number (or (configf:lookup *configdat* "jobtools" "maxload") "3")))
	 (waitdelay               (string->number (or (configf:lookup *configdat* "jobtools" "waitdelay") "60"))))

		reruns)
	  #f))
     
     ;; Register tests 
     ;;
     ((not (hash-table-ref/default test-registry (runs:make-full-test-name test-name item-path) #f))
      (debug:print-info 4 "Pre-registering test " test-name "/" item-path " to create placeholder" )
      (if (eq? *transport-type* 'fs) ;; no point in parallel registration if use fs
	  (begin
	    (cdb:tests-register-test *runremote* run-id test-name item-path)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done))
      ;; always do firm registration now in v1.60 and greater ;; (eq? *transport-type* 'fs) ;; no point in parallel registration if use fs
      (let register-loop ((numtries 15))
	(rmt:general-call 'register-test run-id run-id test-name item-path)
	(thread-sleep! 0.5)
	(if (rmt:get-test-id run-id test-name item-path)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
	  (let ((th (make-thread (lambda ()
				   (mutex-lock! registry-mutex)
				   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'start)
	    (if (> numtries 0)
		(register-loop (- numtries 1))
		(debug:print 0 "ERROR: failed to register test " (runs:make-full-test-name test-name item-path)))))
				   (mutex-unlock! registry-mutex)
				   ;; If haven't done it before register a top level test if this is an itemized test
				   (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
				       (cdb:tests-register-test *runremote* run-id test-name ""))
				   (cdb:tests-register-test *runremote* run-id test-name item-path)
      (if (not (eq? (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f) 'done))
	  (begin
	    (rmt:general-call 'register-test run-id run-id test-name "")
	    (if (rmt:get-test-id run-id test-name "")
				   (mutex-lock! registry-mutex)
				   (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'done)
		(hash-table-set! test-registry (runs:make-full-test-name test-name "") 'done))))
				   (mutex-unlock! registry-mutex))
				 (conc test-name "/" item-path))))
	    (thread-start! th)))
      (runs:shrink-can-run-more-tests-count)   ;; DELAY TWEAKER (still needed?)
      (if (and (null? tal)(null? reg))
	  (list hed tal (append reg (list hed)) reruns)
	  (list (runs:queue-next-hed tal reg reglen regfull)
		(runs:queue-next-tal tal reg reglen regfull)
		;; NB// Here we are building reg as we register tests
		;; if regfull we must pop the front item off reg

	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again
	  (if (or (not (null? reg))(not (null? tal)))
	      (if (vector? hed)
		  (begin
		    (debug:print 1 "WARNING: Dropping test " test-name "/" item-path
				 " from the launch list as it has prerequistes that are FAIL")
		    (let ((test-id (cdb:remote-run db:get-test-id-cached #f run-id hed "")))
		      (mt:test-set-state-status-by-id test-id "NOT_STARTED" "PREQ_FAIL" "Failed to run due to failed prerequisites"))
		    (let ((test-id (rmt:get-test-id run-id hed "")))
		      (if test-id (mt:test-set-state-status-by-id run-id test-id "NOT_STARTED" "PREQ_FAIL" "Failed to run due to failed prerequisites")))
		    (runs:shrink-can-run-more-tests-count) ;; DELAY TWEAKER (still needed?)
		    ;; (thread-sleep! *global-delta*)
		    ;; This next is for the items
		    (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "BLOCKED" #f)
		    (hash-table-set! test-registry (runs:make-full-test-name test-name item-path) 'removed)
		    (list (runs:queue-next-hed tal reg reglen regfull)
			  (runs:queue-next-tal tal reg reglen regfull)

  ;; NB// Should expand items here and then insert into the run queue.
  (debug:print 5 "test-records: " test-records ", flags: " (hash-table->alist flags))

  ;; Do mark-and-find clean up of db before starting runing of quue
  ;;
  ;; (cdb:remote-run db:find-and-mark-incomplete #f)

  (let ((run-info              (cdb:remote-run db:get-run-info #f run-id))
  (let ((run-info              (rmt:get-run-info run-id))
	(tests-info            (mt:get-tests-for-run run-id #f '() '())) ;;  qryvals: "id,testname,item_path"))
	(sorted-test-names     (tests:sort-by-priority-and-waiton test-records))
	(test-registry         (make-hash-table))
	(registry-mutex        (make-mutex))
	(num-retries           0)
	(max-retries           (config-lookup *configdat* "setup" "maxretries"))
	(max-concurrent-jobs   (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				 (if (and mcj (string->number mcj))
				     (string->number mcj)
				     1))) ;; length of the register queue ahead
	(reglen                (if (number? reglen-in) reglen-in 1))
	(last-time-incomplete  (- (current-seconds) 900)) ;; force at least one clean up cycle
	(last-time-some-running (current-seconds)))
	(last-time-some-running (current-seconds))
	(tdbdat                (tasks:open-db)))

    ;; Initialize the test-registery hash with tests that already have a record
    ;; convert state to symbol and use that as the hash value
    (for-each (lambda (trec)
		(let ((id (db:test-get-id        trec))
		      (tn (db:test-get-testname  trec))
		      (ip (db:test-get-item-path trec))

	       (tal         (cdr sorted-test-names))
	       (reg         '()) ;; registered, put these at the head of tal 
	       (reruns      '()))

      (if (not (null? reruns))(debug:print-info 4 "reruns=" reruns))

      ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
      ;; moving this to a parallel thread and just run it once.
      ;;
      (if (> (current-seconds)(+ last-time-incomplete 900))
          (begin
            (set! last-time-incomplete (current-seconds))
            (cdb:remote-run db:find-and-mark-incomplete #f)))
            ;; (rmt:find-and-mark-incomplete-all-runs)
	    ))

      ;; (print "Top of loop, hed=" hed ", tal=" tal " ,reruns=" reruns)
      (let* ((test-record (hash-table-ref test-records hed))
	     (test-name   (tests:testqueue-get-testname test-record))
	     (tconfig     (tests:testqueue-get-testconfig test-record))
	     (jobgroup    (config-lookup tconfig "test_meta" "jobgroup"))
	     (testmode    (let ((m (config-lookup tconfig "requirements" "mode")))
			    (if m (map string->symbol (string-split m)) '(normal))))
	     (itemmap     (configf:lookup tconfig "requirements" "itemmap"))
	     (waitons     (tests:testqueue-get-waitons    test-record))
	     (priority    (tests:testqueue-get-priority   test-record))
	     (itemdat     (tests:testqueue-get-itemdat    test-record)) ;; itemdat can be a string, list or #f
	     (items       (tests:testqueue-get-items      test-record))
	     (item-path   (item-list->path itemdat))
	     (tfullname   (runs:make-full-test-name test-name item-path))
	     (newtal      (append tal (list hed)))
	     (regfull     (>= (length reg) reglen))
	     (num-running (cdb:remote-run db:get-count-tests-running-for-run-id #f run-id #f)))
	     (num-running (rmt:get-count-tests-running-for-run-id run-id)))

	;; every couple minutes verify the server is there for this run
	(if (and (common:low-noise-print 60 "try start server"  run-id)
		 (tasks:need-server run-id))
	    (tasks:start-and-wait-for-server tdbdat run-id 10)) ;; NOTE: delay and wait is done under the hood
	
      (if (> num-running 0)
	(if (> num-running 0)
	  (set! last-time-some-running (current-seconds)))

      (if (> (current-seconds)(+ last-time-some-running 240))
	  (hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1)))
	;; (debug:print 0 "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	;; Ensure all top level tests get registered. This way they show up as "NOT_STARTED" on the dashboard
	;; and it is clear they *should* have run but did not.
	(if (not (hash-table-ref/default test-registry (runs:make-full-test-name test-name "") #f))
	    (begin
	      (cdb:tests-register-test *runremote* run-id test-name "")
	      (rmt:general-call 'register-test run-id run-id test-name "")
	      (hash-table-set! test-registry (runs:make-full-test-name test-name "") 'done)))
	
	;; Fast skip of tests that are already "COMPLETED" - NO! Cannot do that as the items may not have been expanded yet :(
	;;
	(if (member (hash-table-ref/default test-registry tfullname #f) 
		    '(DONOTRUN removed)) ;; *common:cant-run-states-sym*) ;; '(COMPLETED KILLED WAIVED UNKNOWN INCOMPLETE))
	    (begin

	      #f
	      (loop (car tal)(cdr tal) reg reruns)))
	    
	 ;; if items is a proc then need to run items:get-items-from-config, get the list and loop 
	 ;;    - but only do that if resources exist to kick off the job
	 ;; EXPAND ITEMS
	 ((or (procedure? items)(eq? items 'have-procedure))
	  (let ((can-run-more    (runs:can-run-more-tests jobgroup max-concurrent-jobs)))
	  (let ((can-run-more    (runs:can-run-more-tests run-id jobgroup max-concurrent-jobs)))
	    (if (and (list? can-run-more)
		     (car can-run-more))
		(let ((loop-list (runs:expand-items hed tal reg reruns regfull newtal jobgroup max-concurrent-jobs run-id waitons item-path testmode test-record can-run-more items runname tconfig reglen test-registry test-records itemmap)))
		  (if loop-list
		      (apply loop loop-list)))
		;; if can't run more just loop with next possible test
		(loop (car newtal)(cdr newtal) reg reruns))))

	 ((not (null? reg)) ;; could we get here with leftovers?
	  (debug:print-info 0 "Have leftovers!")
	  (loop (car reg)(cdr reg) '() reruns))
	 (else
	  (debug:print-info 4 "Exiting loop with...\n  hed=" hed "\n  tal=" tal "\n  reruns=" reruns))
	 )))
    ;; now *if* -run-wait we wait for all tests to be done
    
    ;; if run-wait mode then wait 15 seconds for db to stabilize
    (if (or (args:get-arg "-run-wait")
	    (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	(thread-sleep! 15))
    ;; Now wait for any RUNNING tests to complete (if in run-wait mode)
    (let wait-loop ((num-running      (cdb:remote-run db:get-count-tests-running-for-run-id #f run-id #f))
    (let wait-loop ((num-running      (rmt:get-count-tests-running-for-run-id run-id))
		    (prev-num-running 0))
      ;; (debug:print 0 "num-running=" num-running ", prev-num-running=" prev-num-running)
      (if (and (or (args:get-arg "-run-wait")
		   (equal? (configf:lookup *configdat* "setup" "run-wait") "yes"))
	       (> num-running 0))
	  (begin
	    ;; Here we mark any old defunct tests as incomplete. Do this every fifteen minutes
	    ;; (debug:print 0 "Got here eh! num-running=" num-running " (> num-running 0) " (> num-running 0))
	    (if (> (current-seconds)(+ last-time-incomplete 900))
		(begin
		  (debug:print-info 0 "Marking stuck tests as INCOMPLETE while waiting for run " run-id ". Running as pid " (current-process-id) " on " (get-host-name))
		  (set! last-time-incomplete (current-seconds))
		  (cdb:remote-run db:find-and-mark-incomplete #f)))
		  (rmt:find-and-mark-incomplete run-id #f)))
	    (if (not (eq? num-running prev-num-running))
		(debug:print-info 0 "run-wait specified, waiting on " num-running " tests in RUNNING, REMOTEHOSTSTART or LAUNCHED state at " (time->string (seconds->local-time (current-seconds)))))
	    (thread-sleep! 15)
	    (wait-loop (cdb:remote-run db:get-count-tests-running-for-run-id #f run-id #f) num-running))))
	    (thread-sleep! 5)
	    ;; (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
	    (wait-loop (rmt:get-count-tests-running-for-run-id run-id) num-running))))
    ;; LET* ((test-record
    ;; we get here on "drop through". All done!
    (debug:print-info 1 "All tests launched")))

(define (runs:calc-fails prereqs-not-met)
  (filter (lambda (test)
	    (and (vector? test) ;; not (string? test))

    (if (not (hash-table-ref/default *test-meta-updated* test-name #f))
        (begin
	   (hash-table-set! *test-meta-updated* test-name #t)
           (runs:update-test_meta test-name test-conf)))
    
    ;; itemdat => ((ripeness "overripe") (temperature "cool") (season "summer"))
    (let* ((new-test-path (string-intersperse (cons test-path (map cadr itemdat)) "/"))
	   (test-id       (cdb:remote-run db:get-test-id-cached #f  run-id test-name item-path))
	   (testdat       (if test-id (cdb:get-test-info-by-id *runremote* test-id) #f)))
	   (test-id       (rmt:get-test-id run-id test-name item-path))
	   (testdat       (if test-id (rmt:get-test-info-by-id run-id test-id) #f)))
      (if (not testdat)
	  (let loop ()
	    ;; ensure that the path exists before registering the test
	    ;; NOPE: Cannot! Don't know yet which disk area will be assigned....
	    ;; (system (conc "mkdir -p " new-test-path))
	    ;;
	    ;; (open-run-close tests:register-test db run-id test-name item-path)
	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (if (not test-id)(set! test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path)))
	    (if (not test-id)(set! test-id (rmt:get-test-id run-id test-name item-path)))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  (cdb:tests-register-test *runremote* run-id test-name item-path)
		  (set! test-id (cdb:remote-run db:get-test-id-cached #f run-id test-name item-path))))
		  (rmt:general-call 'register-test run-id run-id test-name item-path)
		  (set! test-id (rmt:get-test-id run-id test-name item-path))))
	    (debug:print-info 4 "test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (cdb:get-test-info-by-id *runremote* test-id))
	    (set! testdat (rmt:get-test-info-by-id run-id test-id))
	    (if (not testdat)
		(begin
		  (debug:print-info 0 "WARNING: server is overloaded, trying again in one second")
		  (thread-sleep! 1)
		  (loop)))))
      (if (not testdat) ;; should NOT happen
	  (debug:print 0 "ERROR: failed to get test record for test-id " test-id))

	       (let ((skip-test   #f)
		     (skip-check  (configf:get-section test-conf "skip")))
		 (cond 
		  ;; Have to check for skip conditions. This one skips if there are same-named tests
		  ;; currently running
		  ((and skip-check
			(configf:lookup test-conf "skip" "prevrunning"))
		   ;; run-ids = #f means *all* runs
		   (let ((running-tests (cdb:remote-run db:get-tests-for-runs-mindata #f #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f)))
		   (let ((running-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))
		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists"))))))
		 (if skip-test
		     (begin
		       (mt:test-set-state-status-by-id test-id "COMPLETED" "SKIP" skip-test)
		       (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN)) ;; KILLED))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (debug:print 2 "NOTE: " test-name " is already running"))
	 (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
				       (db:test-get-run_duration testdat)))
		(or incomplete-timeout
		    6000)) ;; i.e. no update for more than 6000 seconds
	     (begin
	       (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	       (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	     (debug:print 2 "NOTE: " test-name " is already running")))
	;; (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	;; 			       (db:test-get-run_duration testdat)))
	;; 	(or incomplete-timeout
	;; 	    6000)) ;; i.e. no update for more than 6000 seconds
	;;      (begin
	;;        (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	;;        (tests:test-set-status! run-id test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;        ;; (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "" #f))
	;;      (debug:print 2 "NOTE: " test-name " is already running")))
	(else      
	 (debug:print 0 "ERROR: Failed to launch test " full-test-name ". Unrecognised state " (test:get-state testdat))
	 (case (string->symbol (test:get-state testdat)) 
	   ((COMPLETED INCOMPLETE)
	    (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN))
	   (else
	    (hash-table-set! test-registry (runs:make-full-test-name test-name test-path) 'DONOTRUN))))))))

;;    'set-state-status
;;
;; NB// should pass in keys?
;;
(define (runs:operate-on action target runnamepatt testpatt #!key (state #f)(status #f)(new-state-status #f)(remove-data-only #f))
  (common:clear-caches) ;; clear all caches
  (let* ((db           #f)
	 (tdbdat       (tasks:open-db))
	 (keys         (cdb:remote-run db:get-keys db))
	 (keys         (rmt:get-keys))
	 (rundat       (mt:get-runs-by-patt keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)

						    testpatt states statuses
						    not-in:  #f
						    sort-by: (case action
							       ((remove-runs) 'rundir)
							       (else          'event_time))))))
	 (let* ((run-id    (db:get-value-by-header run header "id"))
		(run-state (db:get-value-by-header run header "state"))
		(run-name  (db:get-value-by-header run header "runname"))
		(tests     (if (not (equal? run-state "locked"))
			       (proc-get-tests run-id)
			       '()))
		(lasttpath "/does/not/exist/I/hope"))
	   (debug:print-info 4 "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
		   ((remove-runs)
		    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    ;; seek and kill in flight -runtests with % as testpatt here
		    (if (equal? testpatt "%")
			(tasks:kill-runner target run-name)
			(debug:print 0 "not attempting to kill any run launcher processes as testpatt is " testpatt))
		    (debug:print 1 "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    (debug:print 1 "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)
		    action)
		   ((run-wait)
		    (debug:print 1 "Waiting for run " runkey ", run=" runnamepatt " to complete"))
		   (else
		    (debug:print-info 0 "action not recognised " action)))
		 (let ((sorted-tests     (sort tests (lambda (a b)(let ((dira (db:test-get-rundir a))
									(dirb (db:test-get-rundir b)))
		 (let ((sorted-tests     (sort tests (lambda (a b)(let ((dira ;; (rmt:sdb-qry 'getstr 
									 (db:test-get-rundir a)) ;; )  ;; (filedb:get-path *fdb* (db:test-get-rundir a)))
									(dirb ;; (rmt:sdb-qry 'getstr 
									 (db:test-get-rundir b))) ;; ) ;; ((filedb:get-path *fdb* (db:test-get-rundir b))))
								    (if (and (string? dira)(string? dirb))
									(> (string-length dira)(string-length dirb))
									#f)))))
		       (toplevel-retries (make-hash-table)) ;; try three times to loop through and remove top level tests
		       (test-retry-time  (make-hash-table))
		       (allow-run-time   10)) ;; seconds to allow for killing tests before just brutally killing 'em
		   (let loop ((test (car sorted-tests))
			      (tal  (cdr sorted-tests)))
		     (let* ((test-id       (db:test-get-id test))
			    (new-test-dat  (cdb:get-test-info-by-id *runremote* test-id)))
			    (new-test-dat  (rmt:get-test-info-by-id run-id test-id)))
		       (if (not new-test-dat)
			   (begin
			     (debug:print 0 "ERROR: We have a test-id of " test-id " but no record was found. NOTE: No locking of records is done between processes, do not simultaneously remove the same run from two processes!")
			     (if (not (null? tal))
				 (loop (car tal)(cdr tal))))
			   (let* ((item-path     (db:test-get-item-path new-test-dat))
				  (test-name     (db:test-get-testname new-test-dat))
				  (run-dir       ;;(filedb:get-path *fdb*
				   ;; (rmt:sdb-qry 'getid 
				   (db:test-get-rundir new-test-dat)) ;; )    ;; run dir is from the link tree
				  (test-state    (db:test-get-state new-test-dat))
				  (test-fulln    (db:test-get-fullname new-test-dat))
				  (uname         (db:test-get-uname    new-test-dat))
				  (toplevel-with-children (and (db:test-get-is-toplevel test)
							       (> (cdb:remote-run db:test-toplevel-num-items db run-id test-name) 0))))
							       (> (rmt:test-toplevel-num-items run-id test-name) 0))))
			     (case action
			       ((remove-runs)
				;; if the test is a toplevel-with-children issue an error and do not remove
				(if toplevel-with-children
				    (begin
				      (debug:print 0 "WARNING: skipping removal of " test-fulln " with run-id " run-id " as it has sub tests")
				      (hash-table-set! toplevel-retries test-fulln (+ (hash-table-ref/default toplevel-retries test-fulln 0) 1))

						  (hash-table-set! test-retry-time test-fulln (current-seconds))))
					    (if (> (- (current-seconds)(hash-table-ref test-retry-time test-fulln)) allow-run-time)
						;; This test is not in a correct state for cleaning up. Let's try some graceful shutdown steps first
						;; Set the test to "KILLREQ" and wait five seconds then try again. Repeat up to five times then give
						;; up and blow it away.
						(begin
						  (debug:print 0 "WARNING: could not gracefully remove test " test-fulln ", tried to kill it to no avail. Forcing state to FAILEDKILL and continuing")
						  (mt:test-set-state-status-by-id (db:test-get-id test) "FAILEDKILL" "n/a" #f)
					    (mt:test-set-state-status-by-id run-id (db:test-get-id test) "FAILEDKILL" "n/a" #f)
						  (thread-sleep! 1))
						(begin
						  (mt:test-set-state-status-by-id (db:test-get-id test) "KILLREQ" "n/a" #f)
					    (mt:test-set-state-status-by-id run-id (db:test-get-id test) "KILLREQ" "n/a" #f)
						  (thread-sleep! 1)))
					    ;; NOTE: This is suboptimal as the testdata will be used later and the state/status may have changed ...
					    (if (null? tal)
						(loop new-test-dat tal)
						(loop (car tal)(append tal (list new-test-dat)))))
					  (begin
					    (runs:remove-test-directory db new-test-dat remove-data-only)
					    (if (not (null? tal))
						(loop (car tal)(cdr tal))))))))
			       ((set-state-status)
				(debug:print-info 2 "new state " (car state-status) ", new status " (cadr state-status))
				(mt:test-set-state-status-by-id (db:test-get-id test) (car state-status)(cadr state-status) #f)
				(mt:test-set-state-status-by-id run-id (db:test-get-id test) (car state-status)(cadr state-status) #f)
				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       ((run-wait)
				(debug:print-info 2 "still waiting, " (length tests) " tests still running")
				(thread-sleep! 10)
				(let ((new-tests (proc-get-tests run-id)))
				  (if (null? new-tests)
				      (debug:print-info 1 "Run completed according to zero tests matching provided criteria.")
				      (loop (car new-tests)(cdr new-tests))))))))
		       )))))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)
	       (let ((remtests (mt:get-tests-for-run (db:get-value-by-header run header "id") #f '("DELETED") '("n/a") not-in: #t)))
		 (if (null? remtests) ;; no more tests remaining
		     (let* ((dparts  (string-split lasttpath "/"))
			    (runpath (conc "/" (string-intersperse 
						(take dparts (- (length dparts) 1))
						"/"))))
		       (debug:print 1 "Removing run: " runkey " " (db:get-value-by-header run header "runname") " and related record")
		       (cdb:remote-run db:delete-run db run-id)
		       (rmt:delete-run run-id)
		       ;; This is a pretty good place to purge old DELETED tests
		       (cdb:remote-run db:delete-tests-for-run db run-id)
		       (cdb:remote-run db:delete-old-deleted-test-records db)
		       (cdb:remote-run db:set-var db "DELETED_TESTS" (current-seconds))
		       (rmt:delete-old-deleted-test-records)
		       ;; (cdb:remote-run db:set-var db "DELETED_TESTS" (current-seconds))
		       ;; need to figure out the path to the run dir and remove it if empty
		       ;;    (if (null? (glob (conc runpath "/*")))
		       ;;        (begin
		       ;; 	 (debug:print 1 "Removing run dir " runpath)
		       ;; 	 (system (conc "rmdir -p " runpath))))
		       )))))
	 ))
     runs))
     runs)
    ;; (sqlite3:finalize! (db:delay-if-busy tdbdat))
    )
  #t)

(define (runs:remove-test-directory db test remove-data-only)
  (let* ((run-dir       (db:test-get-rundir test))    ;; run dir is from the link tree
	 (real-dir      (if (file-exists? run-dir)
			    (resolve-pathname run-dir)
			    #f)))
    (if (not remove-data-only)
	(mt:test-set-state-status-by-id (db:test-get-id test) "REMOVING" "LOCKED" #f))
    (if remove-data-only
	(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "CLEANING" "LOCKED" #f)
	(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "REMOVING" "LOCKED" #f))
    (debug:print-info 1 "Attempting to remove " (if real-dir (conc " dir " real-dir " and ") "") " link " run-dir)
    (if (and real-dir 
	     (> (string-length real-dir) 5)
	     (file-exists? real-dir)) ;; bad heuristic but should prevent /tmp /home etc.
	(begin ;; let* ((realpath (resolve-pathname run-dir)))
	  (debug:print-info 1 "Recursively removing " real-dir)
	  (if (file-exists? real-dir)

	(if (directory? run-dir)
	    (if (> (directory-fold (lambda (f x)(+ 1 x)) 0 run-dir) 0)
		(debug:print 0 "WARNING: refusing to remove " run-dir " as it is not empty")
		(handle-exceptions
		 exn
		 (debug:print 0 "ERROR:  Failed to remove directory " run-dir ((condition-property-accessor 'exn 'message) exn) ", attempting to continue")
		 (delete-directory run-dir)))
	    (if run-dir
	    (if (and run-dir
		     (not (member run-dir (list "n/a" "/tmp/badname"))))
		(debug:print 0 "WARNING: not removing " run-dir " as it either doesn't exist or is not a symlink")
		(debug:print 0 "NOTE: the run dir for this test is undefined. Test may have already been deleted."))
	    ))
    ;; Only delete the records *after* removing the directory. If things fail we have a record 
    (if (not remove-data-only)
	(cdb:remote-run db:delete-test-records db #f (db:test-get-id test)))))
    (if remove-data-only
	(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "NOT_STARTED" "n/a" #f)
	(rmt:delete-test-records (db:test-get-run_id test) (db:test-get-id test)))))

;;======================================================================
;; Routines for manipulating runs
;;======================================================================

;; Since many calls to a run require pretty much the same setup 
;; this wrapper is used to reduce the replication of code
(define (general-run-call switchname action-desc proc)
  (let ((runname (or (args:get-arg "-runname")(args:get-arg ":runname")))
	(target  (common:args-get-target)))
    (cond
     ((not target)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the target with -target")
      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with -runname runname")
      (exit 3))
     (else
      (let ((db   #f)
      (let (;; (db   #f)
	    (keys #f))
	(if (not (launch:setup-for-run))
	(if (launch:setup-for-run)
	    (launch:cache-config)
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	;; (if (args:get-arg "-server")
	;;     (cdb:remote-run server:start db (args:get-arg "-server")))
	(set! keys (keys:config-get-fields *configdat*))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #t environ-patt: #f)))
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)
		    
		  (begin
		    (debug:print 0 "ERROR: [" (args:get-arg "-reqtarg") "] not found in " runconfigf)
		    (if db (sqlite3:finalize! db))
		    (exit 1))))
		    ;; (if db (sqlite3:finalize! db))
		    (exit 1)
		    )))
	    (if (args:get-arg "-target")
		(keys:target-set-args keys (args:get-arg "-target" args:arg-hash) args:arg-hash)))
	(if (not (car *configinfo*))
	    (begin
	      (debug:print 0 "ERROR: Attempted to " action-desc " but run area config file not found")
	      (exit 1))
	    ;; Extract out stuff needed in most or many calls
	    ;; here then call proc
	    (let* ((keyvals    (keys:target->keyval keys target)))
	      (proc target runname keys keyvals)))
	(if db (sqlite3:finalize! db))
	;; (if db (sqlite3:finalize! db))
	(set! *didsomething* #t))))))

;;======================================================================
;; Lock/unlock runs
;;======================================================================

(define (runs:handle-locking target keys runname lock unlock user)
  (let* ((db       #f)
	 (rundat   (mt:get-runs-by-patt keys runname target))
	 (header   (vector-ref rundat 0))
	 (runs     (vector-ref rundat 1)))
    (for-each (lambda (run)
		(let ((run-id (db:get-value-by-header run header "id")))
		  (if (or lock
			  (and unlock
			       (begin
				 (print "Do you really wish to unlock run " run-id "?\n   y/n: ")
				 (equal? "y" (read-line)))))
		      (cdb:remote-run db:lock/unlock-run db run-id lock unlock user)
		      (rmt:lock/unlock-run run-id lock unlock user)
		      (debug:print-info 0 "Skipping lock/unlock on " run-id))))
	      runs)))
;;======================================================================
;; Rollup runs
;;======================================================================

;; Update the test_meta table for this test
(define (runs:update-test_meta test-name test-conf)
  (let ((currrecord (cdb:remote-run db:testmeta-get-record #f test-name)))
  (let ((currrecord (rmt:testmeta-get-record test-name)))
    (if (not currrecord)
	(begin
	  (set! currrecord (make-vector 11 #f))
	  (cdb:remote-run db:testmeta-add-record #f test-name)))
	  (rmt:testmeta-add-record test-name)))
    (for-each 
     (lambda (key)
       (let* ((idx (cadr key))
	      (fld (car  key))
	      (val (config-lookup test-conf "test_meta" fld)))
	 ;; (debug:print 5 "idx: " idx " fld: " fld " val: " val)
	 (if (and val (not (equal? (vector-ref currrecord idx) val)))
	     (begin
	       (print "Updating " test-name " " fld " to " val)
	       (cdb:remote-run db:testmeta-update-field #f test-name fld val)))))
	       (rmt:testmeta-update-field test-name fld val)))))
     '(("author" 2)("owner" 3)("description" 4)("reviewed" 5)("tags" 9)("jobgroup" 10)))))

;; Update test_meta for all tests
(define (runs:update-all-test_meta db)
  (let ((test-names (tests:get-all))) ;; (tests:get-valid-tests)))
    (for-each 
     (lambda (test-name)
       (let* ((test-conf    (mt:lazy-read-test-config test-name)))
	 ;; use the cdb:remote-run instead of passing in db
	 (if test-conf (runs:update-test_meta test-name test-conf))))
     (hash-table-keys test-names))))

;; This could probably be refactored into one complex query ...
;; NOT PORTED - DO NOT USE YET
;;
(define (runs:rollup-run keys runname user keyvals)
  (debug:print 4 "runs:rollup-run, keys: " keys " -runname " runname " user: " user)
  (let* ((db              #f)
	 ;; register run operates on the main db
	 (new-run-id      (cdb:remote-run db:register-run #f keyvals runname "new" "n/a" user))
	 (prev-tests      (cdb:remote-run test:get-matching-previous-test-run-records db new-run-id "%" "%"))
	 (new-run-id      (rmt:register-run keyvals runname "new" "n/a" user))
	 (prev-tests      (rmt:get-matching-previous-test-run-records new-run-id "%" "%"))
	 (curr-tests      (mt:get-tests-for-run new-run-id "%/%" '() '()))
	 (curr-tests-hash (make-hash-table)))
    (cdb:remote-run db:update-run-event_time db new-run-id)
    (rmt:update-run-event_time new-run-id)
    ;; index the already saved tests by testname and itemdat in curr-tests-hash
    (for-each
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path)))
	 (hash-table-set! curr-tests-hash full-name testdat)))
     curr-tests)
    ;; NOPE: Non-optimal approach. Try this instead.
    ;;   1. tests are received in a list, most recent first
    ;;   2. replace the rollup test with the new *always*
    (for-each 
     (lambda (testdat)
       (let* ((testname  (db:test-get-testname testdat))
	      (item-path (db:test-get-item-path testdat))
	      (full-name (conc testname "/" item-path))
	      (prev-test-dat (hash-table-ref/default curr-tests-hash full-name #f))
	      (test-steps    (cdb:remote-run db:get-steps-for-test db (db:test-get-id testdat)))
	      (test-steps    (rmt:get-steps-for-test (db:test-get-id testdat)))
	      (new-test-record #f))
	 ;; replace these with insert ... select
	 (apply sqlite3:execute 
		db 
		(conc "INSERT OR REPLACE INTO tests (run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment) "
		      "VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?);")
		new-run-id (cddr (vector->list testdat)))