Megatest

;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
  (let* ( ;; (lock-key        (conc "test-" test-id))
  (let* (;; locking code removed from here commented out and pasted at end of file
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)
	;; 			    (begin
	;; 			      (debug:print-info 0 *default-log-port* "Timed out waiting for a lock to launch test " keyvals " " runname " " test-name " " test-path)
	;; 			      (rmt:no-sync-del! lock-key) ;; destroy the lock
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time)) ;; 
	;; 			    (begin
	;; 			      (thread-sleep! 1)
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time))))))
	 (item-path       (item-list->path itemdat))
	 (contour         #f)) ;; NOT READY FOR THIS (args:get-arg "-contour")))
	 (contour         #f)                         ;; NOT READY FOR THIS (args:get-arg "-contour")))
	 ;; launch-mode will be 'adjutant or 'normal
	 (launch-mode     (string->symbol (or (configf:lookup *configdat* "jobtools" "mode") "normal"))))
    (let loop ((delta        (- (current-seconds) *last-launch*))
	       (launch-delay (configf:lookup-number *configdat* "setup" "launch-delay" default: 0)))
      (if (> launch-delay delta)
	  (begin
	    (if (common:low-noise-print 1200 "test launch delay") ;; every two hours or so remind the user about launch delay.
		(debug:print-info 0 *default-log-port* "NOTE: test launches are delayed by " launch-delay " seconds. See megatest.config launch-delay setting to adjust.")) ;; launch of " test-name " for " (- launch-delay delta) " seconds"))
	    (thread-sleep! (- launch-delay delta))

	   (subrun          (> (length (hash-table-ref/default tconfig "subrun"  '())) 0)) ;; send a flag to process a subrun
	   ;; (diskspace       (configf:lookup tconfig   "requirements" "diskspace"))
	   ;; (memory          (configf:lookup tconfig   "requirements" "memory"))
	   ;; (hosts           (configf:lookup *configdat* "jobtools"     "workhosts")) ;; I'm pretty sure this was never completed
	   (remote-megatest (configf:lookup *configdat* "setup" "executable"))
	   (run-time-limit  (or (configf:lookup  tconfig   "requirements" "runtimelim")
				(configf:lookup  *configdat* "setup" "runtimelim")))
	   ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 
	   ;;                allow running from dashboard. Extract the path
	   ;;                from the called megatest and convert dashboard
	   ;;             	  or dboard to megatest
	   (local-megatest  (common:find-local-megatest))
	   #;(local-megatest  (let* ((lm  (car (argv)))
				   (dir (pathname-directory lm))
				   (exe (pathname-strip-directory lm)))
			      (conc (if dir (conc dir "/") "")
				    (case (string->symbol exe)
	   (launcher        (let ((l (common:get-launcher *configdat* test-name item-path launcher-mode)))
			      (if (string? l)
				  (string-split l)
				      ((dboard)    "../megatest")
				      ((mtest)     "../megatest")
				      ((dashboard) "megatest")
				      (else exe)))))
	   (launcher        (common:get-launcher *configdat* test-name item-path)) ;; (configf:lookup *configdat* "jobtools"     "launcher"))
	   (test-sig        (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
				  l))) ;; some nonhomogenuity here. '(cmd param1 param2 ...) OR '(host-type launcher)
	    ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
	   (test-sig        (conc (common:get-testsuite-name) ":" test-name ":" item-path))
	   (work-area       #f)
	   (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	   (diskpath   #f)
	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))
	   (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
				(if (args:get-arg "-logging")(list "-logging") '())
				(if (configf:lookup *configdat* "misc" "profilesw")
				    (list (configf:lookup *configdat* "misc" "profilesw"))
				    '()))))
      ;; (if hosts (set! hosts (string-split hosts)))
      ;; set the megatest to be called on the remote host
      (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
      (set! mt-bindir-path (pathname-directory remote-megatest))
      (if launcher (set! launcher (string-split launcher)))
      ;; (if launcher (set! launcher (string-split launcher)))           ;; yuk!
      ;; set up the run work area for this test
      (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	       (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	  (begin
	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      

					(list 'mt-bindir-path mt-bindir-path))))))))
      
      ;; clean out step records from previous run if they exist
      ;; (rmt:delete-test-step-records run-id test-id)
      ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
      (if (common:file-exists? work-area)
	  (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
      (cond
      (cond       
       ;; ((and launcher hosts) ;; must be using ssh hostname
       ;;    (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
       (launcher
	(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
       (else

		     (read-symbolic-link (conc "/proc/" pid "/cwd"))
		     #f)))
    ;; now wait on that process if all is correct
    ;; periodically update the db with runtime
    ;; when the process exits look at the db, if still RUNNING after 10 seconds set
    ;; state/status appropriately
    (process-wait pid)))


 ;; (lock-key        (conc "test-" test-id))
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)
	;; 			    (begin
	;; 			      (debug:print-info 0 *default-log-port* "Timed out waiting for a lock to launch test " keyvals " " runname " " test-name " " test-path)
	;; 			      (rmt:no-sync-del! lock-key) ;; destroy the lock
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time)) ;; 
	;; 			    (begin
	;; 			      (thread-sleep! 1)
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time))))))