Megatest

Diff
Login

Differences From Artifact [0cbe12a80c]:

To Artifact [e284a4f5c3]:


22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
;; (declare (uses filedb))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")

(define (ezsteps:run-from testdat start-step-name run-one)
  (let* ((test-run-dir  ;; (filedb:get-path *fdb* 
	  (db:test-get-rundir testdat)) ;; )
	 (testconfig    (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
	 (ezstepslst    (hash-table-ref/default testconfig "ezsteps" '()))
	 (run-mutex     (make-mutex))
	 (rollup-status 0)
	 (exit-info     (vector #t #t #t))







|







22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
;; (declare (uses filedb))

(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
(include "run_records.scm")

(define (ezsteps:run-from area-dat testdat start-step-name run-one)
  (let* ((test-run-dir  ;; (filedb:get-path *fdb* 
	  (db:test-get-rundir testdat)) ;; )
	 (testconfig    (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
	 (ezstepslst    (hash-table-ref/default testconfig "ezsteps" '()))
	 (run-mutex     (make-mutex))
	 (rollup-status 0)
	 (exit-info     (vector #t #t #t))
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
		  
		  (if (file-exists? (conc stepname ".logpro"))(set! logpro-used #t))
		  
		  ;; call the command using mt_ezstep
		  (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))
		  
		  (debug:print 4 *default-log-port* "script: " script)
		  (rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)
		  ;; now launch
		  (let ((pid (process-run script)))
		    (let processloop ((i 0))
		      (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
				  (mutex-lock! run-mutex)
				  (vector-set! exit-info 0 pid)
				  (vector-set! exit-info 1 exit-status)
				  (vector-set! exit-info 2 exit-code)
				  (mutex-unlock! run-mutex)
				  (if (eq? pid-val 0)
				      (begin
					(thread-sleep! 1)
					(processloop (+ i 1))))
				  ))
		    (let ((exinfo (vector-ref exit-info 2))
			  (logfna (if logpro-used (conc stepname ".html") "")))
		      (rmt:teststep-set-status! run-id test-id stepname "end" exinfo #f logfna))
		    (if logpro-used
			(rmt:test-set-log! test-id (conc stepname ".html")))
		    ;; set the test final status
		    (let* ((this-step-status (cond
					      ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
					      ((eq? (vector-ref exit-info 2) 0)                   'pass)
					      (else 'fail)))
			   (overall-status   (cond
					      ((eq? rollup-status 2) 'warn)







|
















|

|







79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
		  
		  (if (file-exists? (conc stepname ".logpro"))(set! logpro-used #t))
		  
		  ;; call the command using mt_ezstep
		  (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "-") " " stepcmd))
		  
		  (debug:print 4 *default-log-port* "script: " script)
		  (rmt:teststep-set-status! area-dat run-id test-id stepname "start" "-" #f #f)
		  ;; now launch
		  (let ((pid (process-run script)))
		    (let processloop ((i 0))
		      (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
				  (mutex-lock! run-mutex)
				  (vector-set! exit-info 0 pid)
				  (vector-set! exit-info 1 exit-status)
				  (vector-set! exit-info 2 exit-code)
				  (mutex-unlock! run-mutex)
				  (if (eq? pid-val 0)
				      (begin
					(thread-sleep! 1)
					(processloop (+ i 1))))
				  ))
		    (let ((exinfo (vector-ref exit-info 2))
			  (logfna (if logpro-used (conc stepname ".html") "")))
		      (rmt:teststep-set-status! area-dat run-id test-id stepname "end" exinfo #f logfna))
		    (if logpro-used
			(rmt:test-set-log! area-dat test-id (conc stepname ".html")))
		    ;; set the test final status
		    (let* ((this-step-status (cond
					      ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
					      ((eq? (vector-ref exit-info 2) 0)                   'pass)
					      (else 'fail)))
			   (overall-status   (cond
					      ((eq? rollup-status 2) 'warn)
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
		      (debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
				   " this-step-status: " this-step-status " overall-status: " overall-status 
				   " next-status: " next-status " rollup-status: " rollup-status)
		      (case next-status
			((warn)
			 (set! rollup-status 2)
			 ;; NB// test-set-status! does rdb calls under the hood
			 (tests:test-set-status! test-id "RUNNING" "WARN" 
						 (if (eq? this-step-status 'warn) "Logpro warning found" #f)
						 #f))
			((pass)
			 (tests:test-set-status! test-id "RUNNING" "PASS" #f #f))
			(else ;; 'fail
			 (set! rollup-status 1) ;; force fail
			 (tests:test-set-status! test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
			 ))))
		  (if (and (steprun-good? logpro-used (vector-ref exit-info 2))
			   (not (null? tal)))
		      (if (not run-one) ;; if we got here we completed the step, if run-one is true, stop
			  (loop (car tal) (cdr tal) stepname runflag))))
		(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
	  
	  ;; Once done with step/steps update the test record
	  ;;
	  (let* ((item-path (db:test-get-item-path testdat)) ;; (item-list->path itemdat))
		 (testinfo  (rmt:get-testinfo-by-id run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
	    ;; Am I completed?
	    (if (equal? (db:test-get-state testinfo) "RUNNING") ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
		(let ((new-state  (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				  ;; "COMPLETED"
				  ;; (db:test-get-state testinfo)))   ;; else preseve the state as set within the test
				  )
		      (new-status (cond
				   ((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
				   ((eq? rollup-status 0)
				    ;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
				    (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
				   ((eq? rollup-status 1) "FAIL")
				   ((eq? rollup-status 2)
				    ;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
				    (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				   (else "FAIL")))) ;; (db:test-get-status testinfo)))
		  (debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! test-id 
					  new-state
					  new-status
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (not (equal? item-path ""))
		      (cdb:set-state-status-and-roll-up-items *runremote* run-id test-name item-path new-status))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
		(tests:summarize-items #f run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    (pop-directory)
    rollup-status))







|



|


|










|

















|








|



120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
		      (debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
				   " this-step-status: " this-step-status " overall-status: " overall-status 
				   " next-status: " next-status " rollup-status: " rollup-status)
		      (case next-status
			((warn)
			 (set! rollup-status 2)
			 ;; NB// test-set-status! does rdb calls under the hood
			 (tests:test-set-status! area-dat test-id "RUNNING" "WARN" 
						 (if (eq? this-step-status 'warn) "Logpro warning found" #f)
						 #f))
			((pass)
			 (tests:test-set-status! area-dat test-id "RUNNING" "PASS" #f #f))
			(else ;; 'fail
			 (set! rollup-status 1) ;; force fail
			 (tests:test-set-status! area-dat test-id "RUNNING" "FAIL" (conc "Failed at step " stepname) #f)
			 ))))
		  (if (and (steprun-good? logpro-used (vector-ref exit-info 2))
			   (not (null? tal)))
		      (if (not run-one) ;; if we got here we completed the step, if run-one is true, stop
			  (loop (car tal) (cdr tal) stepname runflag))))
		(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
	  
	  ;; Once done with step/steps update the test record
	  ;;
	  (let* ((item-path (db:test-get-item-path testdat)) ;; (item-list->path itemdat))
		 (testinfo  (rmt:get-testinfo-by-id area-dat run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
	    ;; Am I completed?
	    (if (equal? (db:test-get-state testinfo) "RUNNING") ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
		(let ((new-state  (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				  ;; "COMPLETED"
				  ;; (db:test-get-state testinfo)))   ;; else preseve the state as set within the test
				  )
		      (new-status (cond
				   ((not (vector-ref exit-info 1)) "FAIL") ;; job failed to run
				   ((eq? rollup-status 0)
				    ;; if the current status is AUTO the defer to the calculated value (i.e. leave this AUTO)
				    (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
				   ((eq? rollup-status 1) "FAIL")
				   ((eq? rollup-status 2)
				    ;; if the current status is AUTO the defer to the calculated value but qualify (i.e. make this AUTO-WARN)
				    (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				   (else "FAIL")))) ;; (db:test-get-status testinfo)))
		  (debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! area-dat test-id 
					  new-state
					  new-status
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (not (equal? item-path ""))
		      (cdb:set-state-status-and-roll-up-items *runremote* run-id test-name item-path new-status))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
		(tests:summarize-items area-dat #f run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    (pop-directory)
    rollup-status))