28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
|
(import (prefix sqlite3 sqlite3:))
(declare (unit launch))
(declare (uses subrun))
(declare (uses common))
(declare (uses configf))
(declare (uses db))
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
;;======================================================================
;; ezsteps
;;======================================================================
;; ezsteps were going to be coded as
;; stepname[,predstep1,predstep2 ...] [{VAR1=first,second,third}] command to execute
;; BUT
;; now are
;; stepname {VAR=first,second,third ...} command ...
;; where the {VAR=first,second,third ...} is optional.
;; given an exit code and whether or not logpro was used calculate OK/BAD
;; return #t if we are ok, #f otherwise
(define (steprun-good? logpro exitcode)
(or (eq? exitcode 0)
(and logpro (eq? exitcode 2))))
;; if handed a string, process it, else look for MT_CMDINFO
(define (launch:get-cmdinfo-assoc-list #!key (encoded-cmd #f))
(let ((enccmd (if encoded-cmd encoded-cmd (getenv "MT_CMDINFO"))))
(if enccmd
(common:read-encoded-string enccmd)
'())))
|
>
|
|
>
>
>
>
>
>
|
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
(import (prefix sqlite3 sqlite3:))
(declare (unit launch))
(declare (uses subrun))
(declare (uses common))
(declare (uses configf))
(declare (uses db))
(declare (uses ezsteps))
(include "common_records.scm")
(include "key_records.scm")
(include "db_records.scm")
;;======================================================================
;; ezsteps
;;======================================================================
;; ezsteps were going to be coded as
;; stepname[,predstep1,predstep2 ...] [{VAR1=first,second,third}] command to execute
;; BUT
;; now are
;; stepname {VAR=first,second,third ...} command ...
;; where the {VAR=first,second,third ...} is optional.
;; given an exit code and whether or not logpro was used calculate OK/BAD
;; return #t if we are ok, #f otherwise
(define (steprun-good? logpro exitcode stepparms)
(or (eq? exitcode 0)
(and logpro (eq? exitcode 2)) ;; shouldn't this be (member exitcode 2 ...) with the other ok codes?
(let* ((params (alist-ref 'params stepparms)) ;; get the params section
(keep-going (if params
(alist-ref "keep-going" params equal?)
#f)))
(debug:print 0 *default-log-port* "keep-going=" keep-going)
(and keep-going (equal? (car keep-going) "yes")))))
;; if handed a string, process it, else look for MT_CMDINFO
(define (launch:get-cmdinfo-assoc-list #!key (encoded-cmd #f))
(let ((enccmd (if encoded-cmd encoded-cmd (getenv "MT_CMDINFO"))))
(if enccmd
(common:read-encoded-string enccmd)
'())))
|
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
|
;; )
(cond
((equal? status "PASS") "PASS") ;; skip the message part if status is pass
(status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
(else #f)))
#f)))
(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig) ;;; TODO: deprecate me in favor of ezsteps.scm
(let* ((stepname (car ezstep)) ;; do stuff to run the step
(stepinfo (cadr ezstep))
;; (let ((info (cadr ezstep)))
;; (if (proc? info) "" info)))
;; (stepproc (let ((info (cadr ezstep)))
;; (if (proc? info) info #f)))
(stepparts (string-match (regexp "^(\\{([^\\}\\{]*)\\}\\s*|)(.*)$") stepinfo))
(stepparams (if (and (list? stepparts)
(> (length stepparts) 1))
(list-ref stepparts 2)
#f)) ;; for future use, {VAR=1,2,3}, run step for each
(paramparts (if (string? stepparams)
(map (lambda (x)(string-split x "=")) (string-split-fields "[^;]*=[^;]*" stepparams))
'()))
(subrun (alist-ref "subrun" paramparts equal?))
(stepcmd (if (and (list? stepparts)
(> (length stepparts) 2))
(list-ref stepparts 3)
(conc "# error, no command for step "stepname)))
(script "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
(logpro-file (conc stepname ".logpro"))
(html-file (conc stepname ".html"))
(dat-file (conc stepname ".dat"))
(tconfig-logpro (configf:lookup testconfig "logpro" stepname))
(logpro-used (common:file-exists? logpro-file)))
(debug:print 0 *default-log-port* "stepparts: " stepparts ", stepparams: " stepparams
", paramparts: " paramparts ", subrun: " subrun ", stepcmd: " stepcmd)
(if (and tconfig-logpro
(not logpro-used)) ;; no logpro file found but have a defn in the testconfig
(begin
(with-output-to-file logpro-file
(lambda ()
(print ";; logpro file extracted from testconfig\n"
";;")
(print tconfig-logpro)))
(set! logpro-used #t)))
;; NB// can safely assume we are in test-area directory
(debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
" stepparams: " stepparams " stepcmd: " stepcmd)
;; ;; first source the previous environment
;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh")
;; (get-environment-variable "SHELL")) ".csh" ".sh"))))
;; (if (and prevstep (common:file-exists? prev-env))
;; (set! script (conc script "source " prev-env))))
;; call the command using mt_ezstep
;; (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "x") " " stepcmd))
(debug:print 4 *default-log-port* "script: " script)
(rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)
;; now launch the actual process
(call-with-environment-variables
(list (cons "PATH" (conc (get-environment-variable "PATH") ":.")))
(lambda () ;; (process-run "/bin/bash" "-c" "exec ls -l /tmp/foobar > /tmp/delme-more.log 2>&1")
(let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1
(pid #f))
(let ((proc (lambda ()
(set! pid (process-run "/bin/bash" (list "-c" cmd))))))
(if subrun
(begin
(debug:print-info 0 *default-log-port* "Running without MT_.* environment variables.")
(common:without-vars proc "^MT_.*"))
(proc)))
(with-output-to-file "Makefile.ezsteps"
(lambda ()
(print stepname ".log :")
(print "\t" cmd)
(if (common:file-exists? (conc stepname ".logpro"))
(print "\tlogpro " stepname ".logpro " stepname ".html < " stepname ".log"))
(print)
(print stepname " : " stepname ".log")
(print))
#:append)
(rmt:test-set-top-process-pid run-id test-id pid)
(let processloop ((i 0))
(let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
(mutex-lock! m)
(launch:einf-pid-set! exit-info pid) ;; (vector-set! exit-info 0 pid)
(launch:einf-exit-status-set! exit-info exit-status) ;; (vector-set! exit-info 1 exit-status)
(launch:einf-exit-code-set! exit-info exit-code) ;; (vector-set! exit-info 2 exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(processloop (+ i 1))))
)))))
(debug:print-info 0 *default-log-port* "step " stepname " completed with exit code " (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
;; now run logpro if needed
(if logpro-used
(let* ((logpro-exe (or (getenv "LOGPRO_EXE") "logpro"))
(pid (process-run (conc "/bin/sh -c '"logpro-exe" "logpro-file " " (conc stepname ".html") " < " stepname ".log > /dev/null'"))))
(let processloop ((i 0))
(let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
(mutex-lock! m)
;; (make-launch:einf pid: pid exit-status: exit-status exit-code: exit-code)
(launch:einf-pid-set! exit-info pid) ;; (vector-set! exit-info 0 pid)
(launch:einf-exit-status-set! exit-info exit-status) ;; (vector-set! exit-info 1 exit-status)
(launch:einf-exit-code-set! exit-info exit-code) ;; (vector-set! exit-info 2 exit-code)
(mutex-unlock! m)
(if (eq? pid-val 0)
(begin
(thread-sleep! 2)
(processloop (+ i 1)))))
(debug:print-info 0 *default-log-port* "logpro for step " stepname " exited with code " (launch:einf-exit-code exit-info))))) ;; (vector-ref exit-info 2)))))
(let ((exinfo (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
(logfna (if logpro-used (conc stepname ".html") ""))
(comment #f))
(if logpro-used
(let ((datfile (conc stepname ".dat")))
;; load the .dat file into the test_data table if it exists
(if (common:file-exists? datfile)
(set! comment (launch:load-logpro-dat run-id test-id stepname)))
(rmt:test-set-log! run-id test-id (conc stepname ".html"))))
(rmt:teststep-set-status! run-id test-id stepname "end" exinfo comment logfna))
;; set the test final status
(let* ((process-exit-status (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
(this-step-status (cond
((and (eq? process-exit-status 2) logpro-used) 'warn) ;; logpro 2 = warnings
((and (eq? process-exit-status 3) logpro-used) 'check) ;; logpro 3 = check
((and (eq? process-exit-status 4) logpro-used) 'waived) ;; logpro 4 = waived
((and (eq? process-exit-status 5) logpro-used) 'abort) ;; logpro 5 = abort
((and (eq? process-exit-status 6) logpro-used) 'skip) ;; logpro 6 = skip
((eq? process-exit-status 0) 'pass) ;; logpro 0 = pass
(else 'fail)))
(overall-status (cond
((eq? (launch:einf-rollup-status exit-info) 2) 'warn) ;; rollup-status (vector-ref exit-info 3)
((eq? (launch:einf-rollup-status exit-info) 0) 'pass) ;; (vector-ref exit-info 3)
(else 'fail)))
(next-status (cond
((eq? overall-status 'pass) this-step-status)
((eq? overall-status 'warn)
(if (eq? this-step-status 'fail) 'fail 'warn))
((eq? overall-status 'abort) 'abort)
(else 'fail)))
(next-state ;; "RUNNING") ;; WHY WAS THIS CHANGED TO NOT USE (null? tal) ??
(cond
((null? tal) ;; more to run?
"COMPLETED")
(else "RUNNING"))))
(debug:print 4 *default-log-port* "Exit value received: " (launch:einf-exit-code exit-info) " logpro-used: " logpro-used
" this-step-status: " this-step-status " overall-status: " overall-status
" next-status: " next-status " rollup-status: " (launch:einf-rollup-status exit-info)) ;; (vector-ref exit-info 3))
(case next-status
((warn)
(launch:einf-rollup-status-set! exit-info 2) ;; (vector-set! exit-info 3 2) ;; rollup-status
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! run-id test-id next-state "WARN"
(if (eq? this-step-status 'warn) "Logpro warning found" #f)
#f))
((check)
(launch:einf-rollup-status-set! exit-info 3) ;; (vector-set! exit-info 3 3) ;; rollup-status
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! run-id test-id next-state "CHECK"
(if (eq? this-step-status 'check) "Logpro check found" #f)
#f))
((waived)
(launch:einf-rollup-status-set! exit-info 4) ;; (vector-set! exit-info 3 3) ;; rollup-status
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! run-id test-id next-state "WAIVED"
(if (eq? this-step-status 'check) "Logpro waived found" #f)
#f))
((abort)
(launch:einf-rollup-status-set! exit-info 5) ;; (vector-set! exit-info 3 4) ;; rollup-status
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! run-id test-id next-state "ABORT"
(if (eq? this-step-status 'abort) "Logpro abort found" #f)
#f))
((skip)
(launch:einf-rollup-status-set! exit-info 6) ;; (vector-set! exit-info 3 4) ;; rollup-status
;; NB// test-set-status! does rdb calls under the hood
(tests:test-set-status! run-id test-id next-state "SKIP"
(if (eq? this-step-status 'skip) "Logpro skip found" #f)
#f))
((pass)
(tests:test-set-status! run-id test-id next-state "PASS" #f #f))
(else ;; 'fail
(launch:einf-rollup-status-set! exit-info 1) ;; (vector-set! exit-info 3 1) ;; force fail, this used to be next-state but that doesn't make sense. should always be "COMPLETED"
(tests:test-set-status! run-id test-id "COMPLETED" "FAIL" (conc "Failed at step " stepname) #f)
)))
logpro-used))
|
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
<
|
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
;; )
(cond
((equal? status "PASS") "PASS") ;; skip the message part if status is pass
(status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
(else #f)))
#f)))
(define (launch:manage-steps run-id test-id item-path fullrunscript ezsteps subrun test-name tconfigreg exit-info m)
;; (let-values
;; (((pid exit-status exit-code)
;; (run-n-wait fullrunscript)))
;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
;; Since we should have a clean slate at this time there is no need to do
;; any of the other stuff that tests:test-set-status! does. Let's just
|
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
|
(set! ezsteps #t) ;; set the needed flag
(set! ezstepslst
(append (or ezstepslst '())
(list (list "subrun" (conc "{subrun=true} " mt-cmd)))))))
;; process the ezsteps
(if ezsteps
(begin
(if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print-error 0 *default-log-port* "ezsteps defined but ezstepslst is zero length")
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
(debug:print-info 0 *default-log-port* "Processing ezstep \"" (string-intersperse ezstep " ") "\"")
;; check exit-info (vector-ref exit-info 1)
(if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
(let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig))
(stepname (car ezstep)))
;; if logpro-used read in the stepname.dat file
(if (and logpro-used (common:file-exists? (conc stepname ".dat")))
(launch:load-logpro-dat run-id test-id stepname))
(if (steprun-good? logpro-used (launch:einf-exit-code exit-info))
(if (not (null? tal))
(loop (car tal) (cdr tal) stepname))
(debug:print 0 *default-log-port* "WARNING: step " (car ezstep) " failed. Stopping")))
(debug:print 0 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))))))))
(define (launch:monitor-job run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)
(let* ((update-period (string->number (or (configf:lookup *configdat* "setup" "test-stats-update-period") "30")))
|
|
|
|
>
>
>
|
|
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
(set! ezsteps #t) ;; set the needed flag
(set! ezstepslst
(append (or ezstepslst '())
(list (list "subrun" (conc "{subrun=true} " mt-cmd)))))))
;; process the ezsteps
(if ezsteps
(let* ((all-steps-dat (make-hash-table))) ;; keep all the info around as stepname ==> alist; where 'params is the params list (add other stuff as needed)
(if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
;; if ezsteps was defined then we are sure to have at least one step but check anyway
(if (not (> (length ezstepslst) 0))
(debug:print-error 0 *default-log-port* "ezsteps defined but ezstepslst is zero length")
(let loop ((ezstep (car ezstepslst))
(tal (cdr ezstepslst))
(prevstep #f))
(debug:print-info 0 *default-log-port* "Processing ezstep \"" (string-intersperse ezstep " ") "\"")
;; check exit-info (vector-ref exit-info 1)
(if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
(let* ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig all-steps-dat))
(stepname (car ezstep))
(stepparms (hash-table-ref all-steps-dat stepname)))
(setenv "MT_STEP_NAME" stepname)
(pp (hash-table->alist all-steps-dat))
;; if logpro-used read in the stepname.dat file
(if (and logpro-used (common:file-exists? (conc stepname ".dat")))
(launch:load-logpro-dat run-id test-id stepname))
(if (steprun-good? logpro-used (launch:einf-exit-code exit-info) stepparms)
(if (not (null? tal))
(loop (car tal) (cdr tal) stepname))
(debug:print 0 *default-log-port* "WARNING: step " (car ezstep) " failed. Stopping")))
(debug:print 0 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))))))))
(define (launch:monitor-job run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)
(let* ((update-period (string->number (or (configf:lookup *configdat* "setup" "test-stats-update-period") "30")))
|
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
|
(define (launch:end-of-run-check run-id )
(let* ((not-completed-cnt (rmt:get-not-completed-cnt run-id))
(running-cnt (rmt:get-count-tests-running-for-run-id run-id))
(all-test-launched (rmt:get-var (conc "lunch-complete-" run-id)))
(current-state (rmt:get-run-state run-id))
(current-status (rmt:get-run-status run-id)))
;;get-vars run-id to query metadata table to check if all completed. if all-test-launched = yes then only not-completed-cnt = 0 means everyting is completed if no entry found in the table do nothing
(debug:print 0 *default-log-port* "rollup run state/status")
(rmt:set-state-status-and-roll-up-run run-id current-state current-status)
(runs:update-junit-test-reporter-xml run-id)
(cond
((and all-test-launched (eq? not-completed-cnt 0) (equal? all-test-launched "yes" ))
(debug:print 0 *default-log-port* "look for post hook.")
(runs:run-post-hook run-id))
((> running-cnt 3)
(debug:print 0 *default-log-port* "There are " running-cnt " tests running." ))
((> running-cnt 0)
(debug:print 0 *default-log-port* "running cnt > 0 but <= 3 kill-running-tests-if-dead" )
(let ((kill-cnt (launch:kill-tests-if-dead run-id)))
(if (and all-test-launched (equal? all-test-launched "yes") (eq? kill-cnt running-cnt))
(launch:end-of-run-check run-id)))) ;;todo
|
|
>
>
>
|
>
>
|
>
>
>
|
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
|
(define (launch:end-of-run-check run-id )
(let* ((not-completed-cnt (rmt:get-not-completed-cnt run-id))
(running-cnt (rmt:get-count-tests-running-for-run-id run-id))
(all-test-launched (rmt:get-var (conc "lunch-complete-" run-id)))
(current-state (rmt:get-run-state run-id))
(current-status (rmt:get-run-status run-id)))
;;get-vars run-id to query metadata table to check if all completed. if all-test-launched = yes then only not-completed-cnt = 0 means everyting is completed if no entry found in the table do nothing
(debug:print 0 *default-log-port* "Running test cnt :" running-cnt)
(rmt:set-state-status-and-roll-up-run run-id current-state current-status)
(runs:update-junit-test-reporter-xml run-id)
(cond
((and all-test-launched (eq? not-completed-cnt 0) (equal? all-test-launched "yes" ))
(if (and (equal? (rmt:get-var (conc "end-of-run-" run-id)) "no") (common:simple-lock (conc "endOfRun" run-id)))
(begin
(debug:print 4 *default-log-port* "look for post hook. currseconds: " (current-seconds) " EOR " (rmt:get-var (conc "end-of-run-" run-id)))
(debug:print 0 *default-log-port* "End of Run Detected.")
(rmt:set-var (conc "end-of-run-" run-id) "yes")
;(thread-sleep! 10)
(runs:run-post-hook run-id)
(debug:print 4 *default-log-port* "currseconds: " (current-seconds)" eor: " (rmt:get-var (conc "end-of-run-" run-id)))
(common:simple-unlock (conc "endOfRun" run-id)))
(debug:print 0 *default-log-port* "End of Run Detected but not running post hook. This should happen when eor is set to yes. This will happen only when 2 tests exit at smae time. eor= " (rmt:get-var (conc "end-of-run-" run-id)))))
((> running-cnt 3)
(debug:print 0 *default-log-port* "There are " running-cnt " tests running." ))
((> running-cnt 0)
(debug:print 0 *default-log-port* "running cnt > 0 but <= 3 kill-running-tests-if-dead" )
(let ((kill-cnt (launch:kill-tests-if-dead run-id)))
(if (and all-test-launched (equal? all-test-launched "yes") (eq? kill-cnt running-cnt))
(launch:end-of-run-check run-id)))) ;;todo
|