Megatest

(module dbmod
	*
	
(import commonmod)
(import ods)

(import scheme chicken data-structures extras)


(import (prefix sqlite3 sqlite3:)
	posix typed-records srfi-18 srfi-69
	stack



	files








	srfi-13
	srfi-1


	)

;;======================================================================
;;  R E C O R D S
;;======================================================================



;; each db entry is a pair ( db . dbfilepath )
;; I propose this record evolves into the area record
;;
(defstruct dbr:dbstruct 
  (tmpdb       #f)
  (dbstack     #f) ;; stack for tmp db handles, do not initialize with a stack
  (mtdb        #f)
  (refndb      #f)
  (homehost    #f) ;; not used yet
  (on-homehost #f) ;; not used yet
  (read-only   #f)

  (stmt-cache  (make-hash-table))
  )                ;; goal is to converge on one struct for an area but for now it is too confusing
  

;; record for keeping state,status and count for doing roll-ups in
;; iterated tests
;;

(define (db:setup do-sync #!key (areapath #f))
  ;;
  (cond
   (*dbstruct-db* *dbstruct-db*);; TODO: when multiple areas are supported, this optimization will be a hazard
   (else ;;(common:on-homehost?)
    (debug:print-info 13 *default-log-port* "db:setup entered (first time, not cached.)")
    (let* ((dbstruct (make-dbr:dbstruct)))
      (when (not *toppath*)
        (debug:print-info 13 *default-log-port* "in db:setup, *toppath* not set; calling launch:setup")
        (launch:setup areapath: areapath))
      (common:get-db-tmp-area)
      (debug:print-info 13 *default-log-port* "Begin db:open-db")
      (db:open-db dbstruct areapath: areapath do-sync: do-sync)
      (debug:print-info 13 *default-log-port* "Done db:open-db")
      (set! *dbstruct-db* dbstruct)
      ;;(debug:print-info 13 *default-log-port* "new dbstruct = "(dbr:dbstruct->alist dbstruct))
      dbstruct))))

      #f
      (handle-exceptions
	  exn
	(begin
	  (print "Attempt to safely close sqlite3 db failed. Trying again. exn=" exn)
	  (thread-sleep! 3)
	  (sqlite3:interrupt! db)
	  (db:safely-close-sqlite3-db db stmtcache try-num: (- try-num 1)))
	(if (sqlite3:database? db)
	    (let* ((stmts (and stmt-cache (hash-table-ref/default stmt-cache db #f))))
	      (if stmts (map sqlite3:finalize! (hash-table-values stmts)))
	      (sqlite3:finalize! db)
	      #t)
	    #f))))

	  db
	  (conc "UPDATE runs SET " column "='x' WHERE " column "='';"))
	 (set! field-num (+ field-num 1))))
     fields)))
  
(define *global-db-store* (make-hash-table))

(define (db:get-access-mode)
  (if (args:get-arg "-use-db-cache") 'cached 'rmt))

;; Add db direct
;;
(define (db:dispatch-query access-mode rmt-cmd db-cmd . params)
  (if (eq? access-mode 'cached)
      (debug:print 2 *default-log-port* "not doing cached calls right now"))
;;      (apply db:call-with-cached-db db-cmd params)
      (apply rmt-cmd params))
;;)

;; return the target db handle so it can be used
;;
(define (db:cache-for-read-only source target #!key (use-last-update #f))

  (if (and (hash-table-ref/default *global-db-store* target #f)
	   (>= (file-modification-time target)(file-modification-time source)))
      (hash-table-ref *global-db-store* target)
      (let* ((toppath   (launch:setup))
	     (targ-db-last-mod (if (common:file-exists? target)
				   (file-modification-time target)
				   0))
	     (cache-db  (or (hash-table-ref/default *global-db-store* target #f)
			    (db:open-megatest-db path: target)))
	     (source-db (db:open-megatest-db path: source))
	     (curr-time (current-seconds))

;; 			  megatest-db
;; 			  (conc cache-dir "/" fname)
;; 			  use-last-update: #t)))
;; 	  (thread-start! th1)
;; 	  (apply proc cache-db params)
;; 	  ))))

;; options:
;;
;;  'killservers  - kills all servers
;;  'dejunk       - removes junk records
;;  'adj-testids  - move test-ids into correct ranges
;;  'old2new      - sync megatest.db to /tmp/.../megatest.db and /tmp/.../megatest_ref.db
;;  'new2old      - sync /tmp/.../megatest.db to megatest.db and /tmp/.../megatest_ref.db (and update data_synced)
;;  'closeall     - close all opened dbs
;;  'schema       - attempt to apply schema changes
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync dbstruct . options)
  ;; (if (not (launch:setup))
  ;;    (debug:print 0 *default-log-port* "ERROR: not able to setup up for megatest.")
  (let* ((mtdb     (dbr:dbstruct-mtdb dbstruct))
	 (tmpdb    (db:get-db dbstruct))
	 (refndb   (dbr:dbstruct-refndb dbstruct))
	 (allow-cleanup #t) ;; (if run-ids #f #t))
	 (servers (server:get-list *toppath*)) ;; (tasks:get-all-servers (db:delay-if-busy tdbdat)))
	 (data-synced 0)) ;; count of changed records (I hope)
    
    (for-each
     (lambda (option)
       
       (case option
	 ;; kill servers
	 ((killservers)
	  (for-each
	   (lambda (server)
             (handle-exceptions
             exn
             (begin 
               (debug:print-info 0 *default-log-port*  "Unable to get host and/or port from " servr ", exn=" exn)     
               #f)
	     (match-let (((mod-time host port start-time server-id pid) server))
	       (if (and host pid)
		   (tasks:kill-server host pid)))))
	   servers)

          ;; /tmp/bjbarcla/megatest_localdb/fullrun/.nfs.pdx.disks.icf_env_disk001.bjbarcla.gwa.issues.mtdev.matt-bisect.megatest.ext-tests.runs.all.v1.65.1.6524.dev.bb-24-justrollup-f8.rollup.fullrun/megatest.db.lock
          (delete-file* (common:get-sync-lock-filepath))
          )
	 
	 ;; clear out junk records
	 ;;
	 ((dejunk)
	  ;; (db:delay-if-busy mtdb) ;; ok to delay on mtdb
	  (when (file-write-access? (db:dbdat-get-path mtdb)) (db:clean-up mtdb))
	  (db:clean-up tmpdb)
	  (db:clean-up refndb))

	 ;; sync runs, test_meta etc.
	 ;;
	 ((old2new)
	  (set! data-synced
	    (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb tmpdb refndb)
	       data-synced)))
	 
	 ;; now ensure all newdb data are synced to megatest.db
	 ;; do not use the run-ids list passed in to the function
	 ;;
	 ((new2old)
	  (set! data-synced
	    (+ (db:sync-tables (db:sync-all-tables-list dbstruct) #f tmpdb refndb mtdb)
	       data-synced)))

	 ((adj-target)
	  (db:adj-target (db:dbdat-get-db mtdb))
	  (db:adj-target (db:dbdat-get-db tmpdb))
	  (db:adj-target (db:dbdat-get-db refndb)))
	 
	 ((schema)
	  (db:patch-schema-maindb (db:dbdat-get-db mtdb))
	  (db:patch-schema-maindb (db:dbdat-get-db tmpdb))
	  (db:patch-schema-maindb (db:dbdat-get-db refndb))
	  (db:patch-schema-rundb  (db:dbdat-get-db mtdb))
	  (db:patch-schema-rundb  (db:dbdat-get-db tmpdb))
	  (db:patch-schema-rundb  (db:dbdat-get-db refndb))))
       
       (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb))
     options)
    data-synced))

(define (db:tmp->megatest.db-sync dbstruct last-update)
  (let* ((mtdb        (dbr:dbstruct-mtdb dbstruct))
	 (tmpdb       (db:get-db dbstruct))
	 (refndb      (dbr:dbstruct-refndb dbstruct))
	 (res         (db:sync-tables (db:sync-all-tables-list dbstruct) last-update tmpdb refndb mtdb)))
    (stack-push! (dbr:dbstruct-dbstack dbstruct) tmpdb)
    res))

;; 	 (blocks       '())) ;; a block is an archive chunck that can be added too if there is space
;;     (sqlite3:for-each-row  #f)

;;======================================================================
;; L O G G I N G    D B 
;;======================================================================

(define (open-logging-db)
  (let* ((dbpath    (conc (if *toppath* (conc *toppath* "/") "") "logging.db")) ;; fname)
	 (dbexists  (common:file-exists? dbpath))
	 (db        (sqlite3:open-database dbpath))
	 (handler   (sqlite3:make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000)))
    (sqlite3:set-busy-handler! db handler)
    (if (not dbexists)
	(begin
	  (sqlite3:execute db "CREATE TABLE IF NOT EXISTS log (id INTEGER PRIMARY KEY,event_time TIMESTAMP DEFAULT (strftime('%s','now')),logline TEXT,pwd TEXT,cmdline TEXT,pid INTEGER);")
	  (db:set-sync db) ;; (sqlite3:execute db (conc "PRAGMA synchronous = 0;"))
	  ))
    db))

(define (db:log-local-event . loglst)
  (let ((logline (apply conc loglst)))
    (db:log-event logline)))

(define (db:log-event logline)
  (let ((db (open-logging-db)))
    (sqlite3:execute db "INSERT INTO log (logline,pwd,cmdline,pid) VALUES (?,?,?,?);"
		     logline
		     (current-directory)
		     (string-intersperse (argv) " ")
		     (current-process-id))
    (sqlite3:finalize! db)

	)))

;;  select end_time-now from
;;      (select testname,item_path,event_time+run_duration as
;;                          end_time,strftime('%s','now') as now from tests where state in
;;      ('RUNNING','REMOTEHOSTSTART','LAUNCHED'));

(define (db:find-and-mark-incomplete dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
          ;; The default running-deadtime is 720 seconds = 12 minutes.
          ;; "(running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))" = 200 + (2 * (200 + 30 + 30))
         (deadtime-trim (or ovr-deadtime (configf:lookup-number *configdat* "setup" "deadtime")))
         (server-start-allowance 200)
         (server-overloaded-budget 200)
         (launch-monitor-off-time (or (configf:lookup-number *configdat* "setup" "test-stats-update-period") 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default)) ;; two minutes (30 seconds between updates, this leaves 3x grace period)
         )
    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (db:with-db 
     dbstruct #f #f
     (lambda (db)
       (let* ((stmth1 (db:get-cache-stmth
		       dbstruct db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('RUNNING');"))
	      (stmth2 (db:get-cache-stmth
		       dbstruct db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('REMOTEHOSTSTART');"))
	      (stmth3 (db:get-cache-stmth
		       dbstruct db
		       "SELECT id,rundir,uname,testname,item_path FROM tests
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400
                                          AND state IN ('LAUNCHED');")))
	 ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
	 ;;
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	 ;;                     (db:test-get-run_duration testdat)))
	 ;;                    600) 
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(begin
		  (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		  (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		(begin
		  (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
		  (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id="
				    test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)
				    " event-time="event-time" run-duration="run-duration))))
	  stmth1
	  run-id running-deadtime) ;; default time 720 seconds
       
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(begin
		  (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		  (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		(begin
		  (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id
				    " exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time
				    " run-duration="run-duration)
		  (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
	  stmth2
	  run-id remotehoststart-deadtime) ;; default time 230 seconds
	 
	 ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
	 ;;
	 ;; (db:delay-if-busy dbdat)
	 (sqlite3:for-each-row
	  (lambda (test-id run-dir uname testname item-path)
	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		(begin
		  (debug:print-info 0 *default-log-port* "Found old test in LAUNCHED state, test-id=" test-id
				    " 1 day since event_time marked")
                (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched)))))
	  stmth3
	  run-id)
       
	 (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, "
			   (length toplevels) " old LAUNCHED toplevel tests and "
			   (length incompleted) " tests marked RUNNING but apparently dead."))

	 ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
       ;;
	 ;; (db:delay-if-busy dbdat)
	 (let* ((min-incompleted-ids (map car incompleted)) ;; do 'em all
		(all-ids             (append min-incompleted-ids (map car oldlaunched))))
	   (if (> (length all-ids) 0)
	       (begin
		 ;; (launch:is-test-alive "localhost" 435)
		 (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ")
			      " as DEAD")
		 (for-each
                  (lambda (test-id)
                    (let* (;; (run-dir (db:test-get-rundir-from-test-id dbstruct run-id test-id))
			   (tinfo   (db:get-test-info-by-id dbstruct run-id test-id))
			   (run-dir (db:test-get-rundir     tinfo))
			   (host    (db:test-get-host       tinfo))
			   (pid     (db:test-get-process_id tinfo))
			   (result (db:get-status-from-final-status-file run-dir)))
		      (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
			  (begin
			    (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
			    (db:set-state-status-and-roll-up-items
			     dbstruct run-id test-id 'foo "COMPLETED" "PASS"
			     "Test stopped responding but it has PASSED; marking it PASS in the DB."))
			  (let ((is-alive (and (not (eq? pid 0))  ;; 0 is default in re-used field "attemptnum" where pid stored.
					       (launch:is-test-alive host pid))))
			    (if is-alive
				(debug:print 0 *default-log-port* "INFO: test " test-id " on host " host
					     " has a process on pid " pid ", NOT setting to DEAD.")
				(begin
				  (debug:print 0 *default-log-port* "INFO: test " test-id
					       " final state/status is not COMPLETED/PASS. It is " result)
				  (db:set-state-status-and-roll-up-items
				   dbstruct run-id test-id 'foo "COMPLETED" "DEAD"
				   "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")))))))
		  ;; call end of eud of run detection for posthook - from merge, is it needed?
		  ;; (launch:end-of-run-check run-id)
		  all-ids)
		 ;;call end of eud of run detection for posthook
		 (launch:end-of-run-check run-id)
		 )))))))

;; BUG: Probably broken - does not explicitly use run-id in the query
;;
(define (db:top-test-set-per-pf-counts dbstruct run-id test-name)
  (db:general-call dbstruct 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name)))

;; Clean out old junk and vacuum the database
;;

    thekey))

;; Get run-ids for runs with same target but different runnames and NOT run-id
;;
(define (db:get-prev-run-ids dbstruct run-id)
  (let* ((keyvals (db:get-key-val-pairs dbstruct run-id))
	 (kvalues (map cadr keyvals))
	 (keys    (rmt:get-keys))
	 (qrystr  (string-intersperse (map (lambda (x)(conc x "=?")) keys) " AND ")))
    (let ((prev-run-ids '()))
      (if (null? keyvals)
          '()
          (begin
            (db:with-db dbstruct #f #f ;; #f means work with the zeroth db - i.e. the runs db
                        (lambda (db)

       (sqlite3:with-transaction
	db
	(lambda ()
	  (sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE state='DELETED' AND event_time<?);" targtime)
	  (sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE state='DELETED' AND event_time<?);" targtime)
	  (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime)))))))

;; set tests with state currstate and status currstatus to newstate and newstatus
;; use currstate = #f and or currstatus = #f to apply to any state or status respectively
;; WARNING: SQL injection risk. NB// See new but not yet used "faster" version below
;;
;;  AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
;;  (debug:print 0 *default-log-port* "QRY: " qry)
;;  (db:delay-if-busy)
;;
;; NB// This call only operates on toplevel tests. Consider replacing it with more general call
;;
(define (db:set-tests-state-status dbstruct run-id testnames currstate currstatus newstate newstatus)
  (let ((test-ids '()))
    (for-each
     (lambda (testname)
       (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			(if currstate  (conc "state='" currstate "' AND ") "")
			(if currstatus (conc "status='" currstatus "' AND ") "")
			" run_id=? AND testname LIKE ?;"))
	     (test-id (db:get-test-id dbstruct run-id testname "")))
	 (db:with-db
	  dbstruct
	  run-id
	  #t
	  (lambda (db)
	    (sqlite3:execute db qry
			     (or newstate  currstate "NOT_STARTED")
			     (or newstatus currstate "UNKNOWN")
			     run-id testname)))
	 (if test-id
	     (begin
	       (set! test-ids (cons test-id test-ids))
	       (mt:process-triggers dbstruct run-id test-id newstate newstatus)))))
     testnames)
    test-ids))

;; ;; speed up for common cases with a little logic
;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   ;; run-id
   #f
   #t
   (lambda (db)
     (cond
      ((and newstate newstatus newcomment)
       (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
			test-id))
      ((and newstate newstatus)
       (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
      (else
       (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
       (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
       (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				       test-id))))))
  (mt:process-triggers dbstruct run-id test-id newstate newstatus))

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id) ;; fastmode)
  (let* ((qry ;; (if fastmode
		;;   "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '') LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '');")) ;; )
  (db:with-db

;; foo,bla,   1.2,  1.9, <
;; foo,bal,   1.2,  1.2, <   ,     ,Check for overload
;; foo,alb,   1.2,  1.2, <=  , Amps,This is the high power circuit test
;; foo,abl,   1.2,  1.3, 0.1
;; foo,bra,   1.2, pass, silly stuff
;; faz,bar,    10,  8mA,     ,     ,"this is a comment"
;; EOF





(define (db:csv->test-data dbstruct run-id test-id csvdata)
  (debug:print 4 *default-log-port* "test-id " test-id ", csvdata: " csvdata)
  (db:with-db
   dbstruct #f #f
   (lambda (db)
     (let* ((csvlist (csv->list (make-csv-reader

	 (begin
	   (debug:print-error 0 *default-log-port* "reception failed. Received \"" msg "\" but cannot translate it.")
           (print-call-chain (current-error-port))
	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg))) ;; rpc

;; ; This is to be the big daddy call NOPE: Replaced by db:set-state-status-and-roll-up-items
;; ;
;; define (db:test-set-state-status dbstruct run-id test-id state status msg)
;;  (let ((dbdat  (db:get-db dbstruct run-id)))
;;    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
;; 	(db:general-call dbdat 'set-test-start-time (list test-id)))
;;    ;; (if msg
;;    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
;;    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
;;    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)
;;    ;; process the test_data table
;;    (if (and test-id state status (equal? status "AUTO")) 
;; 	(db:test-data-rollup dbstruct run-id test-id status))
;;    (mt:process-triggers dbstruct run-id test-id state status)))

;; state is the priority rollup of all states
;; status is the priority rollup of all completed statesfu
;;
;; if test-name is an integer work off that instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:get-test-info       dbstruct run-id test-name item-path)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (if tl-testdat
			   (db:test-get-id tl-testdat)
			   #f)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(db:general-call dbstruct 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct #f #f
     (lambda (db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts  (db:get-all-state-status-counts-for-test dbstruct run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			      						  (state-stauses (db:roll-up-rules state-status-counts state status))
                          (newstate (car state-stauses))
                          (newstatus (cadr state-stauses)))
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path" newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
							(apply conc
                  (map (lambda (x)
                     (conc
                     		(with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
                              state-status-counts))); end debug:print
   
                       (if tl-test-id
			   (db:test-set-state-status db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
         tr-res)))))

(define (db:roll-up-rules state-status-counts state status)
		(let* ((running     (length (filter (lambda (x)
                          (member (dbr:counts-state x) *common:running-states*))
                                 state-status-counts)))
           (bad-not-started      (length (filter (lambda (x)
                                      (and (equal? (dbr:counts-state x) "NOT_STARTED") 
                                        (not (member (dbr:counts-status x)  *common:not-started-ok-statuses*))))

		   db
		   "SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta;")
		  res))))

;;======================================================================
;; M I S C   M A N A G E M E N T   I T E M S 
;;======================================================================

;; A routine to map itempaths using a itemmap
;; patha and pathb must be strings or this will fail
;;
;; path-b is waiting on path-a
;;
(define (db:compare-itempaths test-b-name path-a path-b itemmaps )
  (debug:print-info 6 *default-log-port* "ITEMMAPS: " itemmaps)
  (let* ((itemmap    (tests:lookup-itemmap itemmaps test-b-name)))
    (if itemmap
	(let ((path-b-mapped (db:multi-pattern-apply path-b itemmap)))
	  (debug:print-info 6 *default-log-port* "ITEMMAP is " itemmap ", path: " path-b ", mapped path: " path-b-mapped)
	  (equal? path-a path-b-mapped))
	(equal? path-b path-a))))

;; A routine to convert test/itempath using a itemmap
;; NOTE: to process only an itempath (i.e. no prepended testname)
;;       just call db:multi-pattern-apply
;;
(define (db:convert-test-itempath path-in itemmap)
  (debug:print-info 6 *default-log-port* "ITEMMAP is " itemmap)
  (let* ((path-parts  (string-split path-in "/"))
	 (test-name   (if (null? path-parts) "" (car path-parts)))
	 (item-path   (string-intersperse (if (null? path-parts) '() (cdr path-parts)) "/")))
    (conc test-name "/" 
	  (db:multi-pattern-apply item-path itemmap))))

;; patterns are:
;;    "rx1"  "replacement1"\n
;;    "rx2"  "replacement2"
;; etc.
;;
(define (db:multi-pattern-apply item-path itemmap)
  (let ((all-patts (string-split itemmap "\n")))
    (if (null? all-patts)
	item-path
	(let loop ((hed (car all-patts))
		   (tal (cdr all-patts))
		   (res item-path))
	  (let* ((parts (string-split hed))
		 (patt  (car parts))

		 (repl  (if (> (length parts) 1)(cadr parts) ""))

		 (newr  (if (and patt repl)
			    (begin
                              (handle-exceptions
                               exn
                               (begin
                                  (debug:print 0 *default-log-port*
                                  "WARNING: itemmap has problem \"" itemmap "\", patt: " patt ", repl: " repl ", exn=" exn)
                                 res)
                              (string-substitute patt repl res))


                              )
			    (begin
                              (debug:print 0 *default-log-port*
                               "WARNING: itemmap has problem \"" itemmap "\", patt: " patt ", repl: " repl)
			      res))))
	    (if (null? tal)
		newr
		(loop (car tal)(cdr tal) newr)))))))




;; the new prereqs calculation, looks also at itempath if specified
;; all prereqs must be met
;;    if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;;    if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;

	   (conc (current-directory) "/" outputfile)))
     results)
    ;; brutal clean up
    (stack-push! (dbr:dbstruct-dbstack dbstruct) dbdat)
    (system "rm -rf tempdir")))

;; (db:extract-ods-file db "outputfile.ods" '(("sysname" "%")("fsname" "%")("datapath" "%")) "%")








)