Megatest

;;======================================================================
;; Database access
;;======================================================================

;; dbstruct vector containing all the relevant dbs like main.db, megatest.db, run.db etc

(declare (unit db))
(declare (uses common))
(declare (uses debugprint))
(declare (uses dbmod))
(declare (uses dbfile))
(declare (uses keys))
(declare (uses ods))
(declare (uses client))
(declare (uses mt))
(declare (uses commonmod))
(declare (uses mtargs))

(import commonmod
	(prefix mtargs args:))

(use (srfi 18)
     extras
     tcp
     stack
     (prefix sqlite3 sqlite3:)
     srfi-1
     posix

     format
     dot-locking
     z3
     typed-records
     matchable
     files)











(include "common_records.scm")
(include "db_records.scm")
(include "key_records.scm")
(include "run_records.scm")

(define *number-of-writes* 0)
(define *number-non-write-queries* 0)

(import debugprint)
(import dbmod)
(import dbfile)

;; record for keeping state,status and count for doing roll-ups in
;; iterated tests
;;
(defstruct dbr:counts
  (state #f)
  (status #f)
  (count  0)) 


(define (db:with-db dbstruct run-id r/w proc . params)
  (case (rmt:transport-mode)
    ((http)(dbfile:with-db dbstruct run-id r/w proc params))
    ((tcp) (dbmod:with-db dbstruct run-id r/w proc params))
    ((nfs) (dbmod:with-db dbstruct run-id r/w proc params))
    (else (assert #f "FATAL: db:with-db called with non-existant transport mode"))))

;;======================================================================
;; hash of hashs
;;======================================================================


(define (db:hoh-set! dat key1 key2 val)
  (let* ((subhash (hash-table-ref/default dat key1 #f)))
    (if subhash
	(hash-table-set! subhash key2 val)
	(begin
	  (hash-table-set! dat key1 (make-hash-table))
	  (db:hoh-set! dat key1 key2 val)))))

(define (db:hoh-get dat key1 key2)
  (let* ((subhash (hash-table-ref/default dat key1 #f)))
    (and subhash
	 (hash-table-ref/default subhash key2 #f))))










;;======================================================================
;; SQLITE3 HELPERS
;;======================================================================

(define (db:general-sqlite-error-dump exn stmt . params)
  (let ((err-status ((condition-property-accessor 'sqlite3 'status #f) exn))) ;; RADT ... how does this work?
    ;; check for (exn sqlite3) ((condition-property-accessor 'exn 'message) exn)

(define (db:setup do-sync)
  (assert *toppath* "FATAL: db:setup called before launch:setup has been run.")
  (let* ((tmpdir (common:get-db-tmp-area)))
    (if (not *dbstruct-dbs*)
	(dbfile:setup do-sync *toppath* tmpdir)
	*dbstruct-dbs*)))

;; moved from dbfile
;;
;; ADD run-id SUPPORT
;;
(define (db:create-all-triggers dbstruct)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (db:create-triggers db))))

(define (db:create-triggers db)
    (for-each (lambda (key)
              (sqlite3:execute db (cadr key)))
          db:trigger-list))

(define (db:drop-all-triggers dbstruct)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (db:drop-triggers db))))

(define (db:have-incompletes? dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())
	 ;; (deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
	 (deadtime  (or ovr-deadtime 72000))) ;; twenty hours
    (db:with-db
     dbstruct run-id #f
     (lambda (dbdat db)
       
       ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
       ;;
       ;; HOWEVER: this code in run:test seems to work fine
       ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
       ;;                     (db:test-get-run_duration testdat)))
       ;;                    600) 
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row 
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (begin
                (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels)))
                ;; (print-info "Found old toplevel test in RUNNING state, test-id=" test-id))
              (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
        (db:get-cache-stmth dbdat db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');")
        run-id deadtime)

       ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
       ;;
       ;; (db:delay-if-busy dbdat)
       (sqlite3:for-each-row
        (lambda (test-id run-dir uname testname item-path)
          (if (and (equal? uname "n/a")
                   (equal? item-path "")) ;; this is a toplevel test
              ;; what to do with toplevel? call rollup?
              (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
              (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
        (db:get-cache-stmth dbdat db
        "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');")
        run-id)
       
       ;; (print-info "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
       (if (and (null? incompleted)
                (null? oldlaunched)
                (null? toplevels))
           #f
           #t)))))


;; looks up subdb and returns it, if not found then set up
;; and then return it.
;;
#;(define (db:get-db dbstruct run-id)
  (let* ((res (dbfile:get-subdb dbstruct run-id)))
    (if res

;; return the target db handle so it can be used
;;
(define (db:cache-for-read-only source target #!key (use-last-update #f))
  (if (and (hash-table-ref/default *global-db-store* target #f)
	   (>= (file-modification-time target)(file-modification-time source)))
      (hash-table-ref *global-db-store* target)
      (let* ((toppath   (launch:setup))
	     (targ-db-last-mod (db:get-sqlite3-mod-time target))
;;	      (if (common:file-exists? target)
;; BUG: This needs to include wal mode stuff .shm etc.
;;				   (file-modification-time target)
;;				   0))
	     (cache-db  (or (hash-table-ref/default *global-db-store* target #f)
			    (db:open-megatest-db path: target)))
	     (source-db (db:open-megatest-db path: source))
	     (curr-time (current-seconds))
	     (res      '())
	     (last-update (if use-last-update (cons "last_update" targ-db-last-mod) #f)))
	(db:sync-tables (db:sync-main-list source-db) last-update source-db cache-db)
	(db:sync-tables db:sync-tests-only last-update source-db cache-db)
	(hash-table-set! *global-db-store* target cache-db)
	cache-db)))

(define (db:get-sqlite3-mod-time fname)
  (let* ((wal-file (conc fname "-wal"))
	 (shm-file (conc fname "-shm"))
	 (get-mtime (lambda (f)
		      (if (and (file-exists? f)
			       (file-read-access? f))
			  (file-modification-time f)
			  0))))
    (max (get-mtime fname)
	 (get-mtime wal-file)
	 (get-mtime shm-file))))
	 
;; (define (db:all-db-sync dbstruct)

;;   (let* ((dbdat (db:open-db dbstruct #f db:initialize-main-db))
;; 	 (data-synced       0) ;; count of changed records
;;     (tmp-area       (common:get-db-tmp-area))
;;     (dbfiles        (glob (conc tmp-area"/.mtdb/*.db")))

;;     (sync-durations (make-hash-table))

;;     (no-sync-db        (db:open-no-sync-db)))
;;     (for-each
;;      (lambda (file) ;; tmp db file
;;        (debug:print-info 3 *default-log-port* "file: " file)
;;        (let* ((fname       (conc (pathname-file file) ".db")) ;; fname is tmp db file
;;               (wal-file (conc fname "-wal"))
;;               (shm-file (conc fname "-shm"))
;; 	      (fulln       (conc *toppath*"/,mtdb/"fname)) ;; fulln is nfs db name
;;               (wal-time     (if (file-exists? wal-file)             
;; 			       (file-modification-time wal-file)
;;                                0))
;;               (shm-time     (if (file-exists? shm-file)             
;; 			       (file-modification-time shm-file)
;;                                0))
;; 	      (time1        (db:get-sqlite3-mod-time file))
;; ;;	       (if (file-exists? file)              ;; time1 is the max itime of the tmp db, -wal and -shm files.
;; ;;			       (max (file-modification-time file) wal-time shm-time)
;; ;;			       (begin

;; ;;				 (debug:print-info 2 *default-log-port* "Sync - I do not see file "file)
;; ;;			   1)))
;; 	      (time2       (db:get-sqlite3-mod-time fulln))
;; ;;	      (if (file-exists? fulln)             ;; time2 is nfs file time
;; ;;			       (file-modification-time fulln)
;; ;;			       (begin
;; ;;				 (debug:print-info 2 *default-log-port* "Sync - I do not see file "fulln)
;; ;;				 0)))
;; 	      (changed      (> (- time1 time2) (+ (random 5) 1)))  ;; it has been at some few seconds since last synced
;; 	      (changed10    (> (- time1 time2) 10)) ;; it has been at least ten seconds since sync'd
;; 	      (jfile-exists (file-exists? (conc file"-journal"))) ;; i.e. are we busy?
;; 	      (do-cp        (cond
;; 			     ((not (file-exists? fulln)) ;; shouldn't happen, but this might recover
;; 			      (cons #t (conc "File "fulln" not found! Copying "fname" to "fulln)))
;; 			     ((and (not jfile-exists) changed)
;; 			      (cons #t "not busy, changed")) ;; not busy and changed
;; 			     ((and jfile-exists changed10)
;; 			      (cons #t "busy but not synced in a while")) ;; busy but not sync'd in over 10 seconds
;; 			     ((and changed *time-to-exit*)
;; 			      (cons #t "Time to exit, forced final sync")) ;; last sync
;; 			     (else
;; 			      (cons #f "No sync needed")))))
;; 	 (if (car do-cp)
;; 	     (let* ((start-time (current-milliseconds))
;; 		    (fname (pathname-file file))
;; 		    (runid (if (string= fname "main") #f (string->number fname))))
;; 	       (debug:print-info 3 *default-log-port* "db:all-db-sync: fname: "
;; 				 fname", delta: " (- time1 time2) " seconds, reason: "(cdr do-cp))
;; 	       (db:lock-and-delta-sync no-sync-db dbstruct fname runid (db:get-keys dbstruct) db:initialize-main-db)
;; 	       (hash-table-set! sync-durations (conc fname".db")
;; 				(- (current-milliseconds) start-time)))
;; 	     (debug:print-info 3 *default-log-port* "skipping sync. " file " is up to date")
;;          )))
;;      dbfiles)
;;     ;; WHY does the dbdat need to be added back?
;;     (if dbdat (dbfile:add-dbdat dbstruct #f dbdat))
;;     )
;;   #t)

(define (db:kill-servers)
  (let* ((servers (server:choose-server *toppath* 'all-valid))) ;; (server:get-list *toppath*))





    (for-each
     (lambda (server)



       (handle-exceptions

           exn




         (begin 
           (debug:print-info 0 *default-log-port*  "Unable to get host and/or port from " server ", exn=" exn)     














           #f)
	 (match-let (((mod-time host port start-time server-id pid) server))
		    (if (and host pid)









			(tasks:kill-server host pid)))))
     servers)
    (delete-file* (common:get-sync-lock-filepath))))



;; options:
;;
;;  'killservers  - kills all servers
;;  'dejunk       - removes junk records
;;  'adj-testids  - move test-ids into correct ranges
;;  'old2new      - sync megatest.db to /tmp/.../megatest.db and /tmp/.../megatest_ref.db
;;  'new2old      - sync /tmp/.../megatest.db to megatest.db and /tmp/.../megatest_ref.db (and update data_synced)
;;  'closeall     - close all opened dbs
;;  'schema       - attempt to apply schema changes
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync dbstruct . options)
  (let* (;; (dbdat       (db:open-db dbstruct #f dbfile:db-init-proc))
	 (data-synced 0) ;; count of changed records
	 (tmp-area       (common:get-db-tmp-area))
	 (old2new (member 'old2new options))
	 (dejunk (member 'dejunk options))
	 (killservers (member 'killservers options))

	 (src-area (if old2new *toppath* tmp-area))
	 (dest-area (if old2new tmp-area *toppath*))
	 (dbfiles        (if old2new (glob (conc *toppath* "/.mtdb/*.db")) (glob (conc tmp-area "/.mtdt/*.db"))))
	 (keys (db:get-keys dbstruct))
	 (sync-durations (make-hash-table)))

    ;; kill servers
    (if killservers (db:kill-servers))













    

    (if (not dbfiles)
	(debug:print-error 0 *default-log-port* "no dbfiles found in " (conc *toppath* "/.mtdb"))
	(for-each
	 (lambda (srcfile)
	   (debug:print-info 3 *default-log-port* "file: " srcfile)
	   (let* ((fname    (conc (pathname-file srcfile) ".db"))
		  (basename (pathname-file srcfile))
		  (run-id   (if (string= basename "main") #f (string->number basename)))
		  (destfile (conc dest-area "/.mtdb/" fname))
		  (dest-directory  (conc dest-area "/.mtdb/"))


		  (time1    (file-modification-time srcfile))
		  (time2    (if (file-exists? destfile)
				(begin
				  (debug:print-info 2 *default-log-port* "destfile " destfile " exists")
				  (file-modification-time destfile))

				(begin
				  (debug:print-info 0 *default-log-port* "Sync - I do not see file " destfile)
				  0)))
		  (changed   ( < (- time2 time1) 6.0)) ;; dest db not updated within last 6 seconds

		  (do-cp     (cond
			      ((not (file-exists? destfile)) ;; shouldn't happen, but this might recover
			       (debug:print-info 2 *default-log-port* "File " destfile " not found. Copying "srcfile" to "destfile)
			       ;; TODO: Need to fix this for WAL mod. Can't just copy.
			       (system (conc "/bin/mkdir -p " dest-directory))
			       (system (conc "/bin/cp " srcfile " " destfile))
			       #t)
			      (changed ;; (and changed

			       #t)
			      ((and changed *time-to-exit*) ;; last sync
			       #t)
			      (else
			       #f))))
             (if (or dejunk do-cp)

		 (let* ((start-time (current-milliseconds))
			;; subdb is misnamed - should be dbdat (I think...)
			(subdb    (dbfile:open-db dbstruct run-id dbfile:db-init-proc))
			;;        (or (dbfile:get-subdb dbstruct run-id)
			;;            (dbfile:init-subdb dbstruct run-id dbfile:db-init-proc)))
			(mtdb      (dbr:subdb-mtdbdat subdb))
			;;
			;; BUG: -mrw- I think this next line is wrong. run-id should be the path to .mtdb/<runid>.db
			;; 
			(tmpdb     (dbfile:open-db dbstruct run-id dbfile:db-init-proc)))
		   

		   (debug:print-info 2 *default-log-port* "delta syncing file: " srcfile ", time diff: " (- time1 time2) " seconds")

		   (if old2new
                       (begin
			 (if dejunk (db:clean-up run-id mtdb))
			 (db:sync-tables (db:sync-all-tables-list
					  dbstruct
					  (db:get-keys dbstruct))
					 #f mtdb tmpdb))
                       (begin
			 (if dejunk (db:clean-up run-id tmpdb))
			 (db:sync-tables (db:sync-all-tables-list dbstruct (db:get-keys dbstruct)) #f tmpdb mtdb)))


		   (hash-table-set! sync-durations (conc srcfile ".db") (- (current-milliseconds) start-time)))
		 (debug:print-info 2 *default-log-port* "skipping delta sync. " srcfile " is up to date"))))



	 dbfiles))

    data-synced))



;; Sync all changed db's
;;
(define (db:tmp->megatest.db-sync dbstruct run-id last-update)
  (let* ((subdbs (hash-table-values (dbr:dbstruct-subdbs dbstruct)))
	 (res    '()))
    (for-each
     (lambda (subdb)

       (let* ((mtdb   (dbr:subdb-mtdb subdb))
	      (tmpdb  (db:get-subdb dbstruct run-id))
	      (refndb (dbr:subdb-refndb subdb))
	      (newres (db:sync-tables (db:sync-all-tables-list dbstruct (db:get-keys dbstruct)) last-update tmpdb refndb mtdb)))
	 ;; (stack-push! (dbr:subdb-dbstack subdb) tmpdb)
	 ;; BUG: verify this is really needed
	 (dbfile:add-dbdat dbstruct run-id tmpdb)
	 (set! res (cons newres res))))
     subdbs)
    res))

;;;; run-ids
;;    if #f use *db-local-sync* : or 'local-sync-flags

	(sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_rundat (
                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              update_time  TIMESTAMP,
                              cpuload      INTEGER DEFAULT -1,
                              diskfree     INTEGER DEFAULT -1,
                              diskusage    INTGER DEFAULT -1,
                              run_duration INTEGER DEFAULT 0,
 last_update INTEGER DEFAULT (strftime('%s','now')));")
	(sqlite3:execute db "CREATE TABLE IF NOT EXISTS archives (
                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              state        TEXT DEFAULT 'new',
                              status       TEXT DEFAULT 'n/a',
                              archive_type TEXT DEFAULT 'bup',
                              du           INTEGER,
                              archive_path TEXT,
 last_update INTEGER DEFAULT (strftime('%s','now')));")))
        (db:create-triggers db)    
     db)) ;; )

;;======================================================================
;; A R C H I V E S
;;======================================================================

	 db 
	 (conc
	  "SELECT d.id,d.archive_area_name,disk_path,last_df,last_df_time FROM archive_disks AS d
             INNER JOIN archive_blocks AS b ON d.id=b.archive_disk_id
             WHERE b.id IN (" (string-intersperse (map conc res) ",") ") AND
         last_df > ?;")
	 dneeded))
    ;; BUG: Verfify this is really needed
    (dbfile:add-dbdat dbstruct #f dbdat)
    blocks))
    
;; returns id of the record, register a disk allocated to archiving and record it's last known
;; available space
;;
(define (db:archive-register-disk dbstruct bdisk-name bdisk-path df)

;; D B   U T I L S
;;======================================================================

;;======================================================================
;; M A I N T E N A N C E
;;======================================================================

;; (define (db:have-incompletes? dbstruct run-id ovr-deadtime)
;;   (let* ((incompleted '())
;; 	 (oldlaunched '())
;; 	 (toplevels   '())
;; 	 (deadtime-str (configf:lookup *configdat* "setup" "deadtime"))
;; 	 (deadtime     (if (and deadtime-str
;; 				(string->number deadtime-str))
;; 			   (string->number deadtime-str)
;; 			   72000))) ;; twenty hours
;;     (db:with-db
;;      dbstruct run-id #f
;;      (lambda (dbdat db)
;;        (if (number? ovr-deadtime)(set! deadtime ovr-deadtime))
;;        
;;        ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
;;        ;;
;;        ;; HOWEVER: this code in run:test seems to work fine
;;        ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
;;        ;;                     (db:test-get-run_duration testdat)))
;;        ;;                    600) 
;;        ;; (db:delay-if-busy dbdat)
;;        (sqlite3:for-each-row 
;;         (lambda (test-id run-dir uname testname item-path)
;;           (if (and (equal? uname "n/a")
;;                    (equal? item-path "")) ;; this is a toplevel test
;;               ;; what to do with toplevel? call rollup?
;;               (begin
;;                 (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
;;                 (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
;;               (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))))
;;         (db:get-cache-stmth dbdat db
;;         "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?) AND state IN ('RUNNING','REMOTEHOSTSTART');")
;;         run-id deadtime)
;; 
;;        ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
;;        ;;
;;        ;; (db:delay-if-busy dbdat)
;;        (sqlite3:for-each-row
;;         (lambda (test-id run-dir uname testname item-path)
;;           (if (and (equal? uname "n/a")
;;                    (equal? item-path "")) ;; this is a toplevel test
;;               ;; what to do with toplevel? call rollup?
;;               (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
;;               (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched))))
;;         (db:get-cache-stmth dbdat db
;;         "SELECT id,rundir,uname,testname,item_path FROM tests WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400 AND state IN ('LAUNCHED');")
;;         run-id)
;;        
;;        (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, " (length toplevels) " old LAUNCHED toplevel tests and " (length incompleted) " tests marked RUNNING but apparently dead.")
;;        (if (and (null? incompleted)
;;                 (null? oldlaunched)
;;                 (null? toplevels))
;;            #f
;;            #t)))))

(define (db:get-status-from-final-status-file run-dir)
  (let ((infile (conc run-dir "/.final-status")))
    ;; first verify we are able to write the output file
    (if (not (file-read-access? infile))
        (begin 
	  (debug:print 2 *default-log-port* "ERROR: cannot read " infile)

    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)

    (db:with-db 
     dbstruct run-id #f
     (lambda (dbdat db)
       (let* ((stmth1 (db:get-cache-stmth
		       dbdat db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('RUNNING');"))
	      (stmth2 (db:get-cache-stmth
		       dbdat db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('REMOTEHOSTSTART');"))
	      (stmth3 (db:get-cache-stmth
		       dbdat db
		       "SELECT id,rundir,uname,testname,item_path FROM tests
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400
                                          AND state IN ('LAUNCHED');")))
	 ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
	 ;;
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)

;; 	(begin
;; 	  (debug:print-info 4 *default-log-port* "launch throttle factor=" *global-delta*)
;; 	  (set! *last-global-delta-printed* *global-delta*)))

(define (db:set-var dbstruct var val)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute  (db:get-cache-stmth dbdat db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);") var val))))

(define (db:add-var dbstruct var val)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute  (db:get-cache-stmth dbdat db "UPDATE metadat SET val=val+? WHERE var=?;") val var))))

(define (db:del-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute  (db:get-cache-stmth dbdat db "DELETE FROM metadat WHERE var=?;") var))))

;;======================================================================
;; no-sync.db - small bits of data to be shared between servers
;;======================================================================

(define (db:get-dbsync-path)
  (case (rmt:transport-mode)





    ((http)(common:get-db-tmp-area))



    ((tcp) (conc *toppath*"/.mtdb"))
    ((nfs) (conc *toppath*"/.mtdb"))


    (else "/tmp/dunno-this-gonna-exist")))

;; This is needed for api.scm
(define (db:open-no-sync-db)
   (dbfile:open-no-sync-db (db:get-dbsync-path)))
 








;; why get the keys from the db? why not get from the *configdat*
;; using keys:config-get-fields?

(define (db:get-keys dbstruct)
  (keys:config-get-fields *configdat*))














;; extract index number given a header/data structure
(define (db:get-index-by-header header field)
  (list-index (lambda (x)(equal? x field)) header))

;; look up values in a header/data structure
(define (db:get-value-by-header row header field)
  (let ((len (if (vector? row)
		 (vector-length row)
		 0)))
    (if (or (null? header) (not row))
	#f
	(let loop ((hed (car header))
		   (tal (cdr header))
		   (n   0))
	  (if (equal? hed field)
	      (handle-exceptions
	       exn
	       (begin
		 (debug:print 4 *default-log-port* "WARNING: attempt to read non-existant field, row="
			      row " header=" header " field=" field ", exn=" exn)
		 #f)
	       (if (>= n len)
		   #f
		   (vector-ref row n)))
	      (if (null? tal) #f (loop (car tal)(cdr tal)(+ n 1))))))))

;; Accessors for the header/data structure
;; get rows and header from 
(define (db:get-header vec)(vector-ref vec 0))
(define (db:get-rows   vec)(vector-ref vec 1))

;;======================================================================

		    qryvals)
	     (sqlite3:execute db "UPDATE runs SET state=?,status=?,event_time=strftime('%s','now') WHERE id=? AND state='deleted';" state status res)
	     res))) 
	(begin
	  (debug:print-error 0 *default-log-port* "Called without all necessary keys")
	  #f))))

(define (db:get-run-id dbstruct runname target)
  (let ((runs (db:simple-get-runs dbstruct runname #f #f target #f))) ;; runpatt count offset target last-update
    (if (null? runs)
	#f
	(simple-run-id (car runs)))))

;; called with run-id=#f so will operate on main.db
;;
(define (db:insert-run dbstruct target runname run-meta)
  (let* ((keys (db:get-keys dbstruct))
     	 (runs (db:simple-get-runs dbstruct runname #f #f target #f))) ;; runpatt count offset target last-update
    ;; need to insert run based on target and runname
    (let* ((targvals (string-split target "/"))
	   (keystr   (string-intersperse keys ","))
	   (key?str  (string-intersperse (make-list (length targvals) "?") ","))
	   (qrystr   (conc "INSERT INTO runs (runname,"keystr") VALUES (?,"key?str")"))
	   (get-var  (lambda (db qrystr)
		       (let* ((res #f))
			 (sqlite3:for-each-row
			  (lambda row
			    (set res (car row)))
			  db qrystr runname)
			 res))))
      (if (null? runs)
	  (db:create-initial-run-record dbstruct runname target))
      (let* ((run-id (db:get-run-id dbstruct runname target)))
	(db:with-db
	 dbstruct
	 #f #f
	 (lambda (dbdat db)
	   (for-each
	    (lambda (keyval)
	      (let* ((fieldname (car keyval))
		     (getqry    (conc "SELECT "fieldname" FROM runs WHERE id=?;"))
		     (setqry    (conc "UPDATE runs SET "fieldname"=? WHERE id=?;"))
		     (val       (cdr keyval))
		     (valnum    (if (number? val)
				    val
				    (if (string? val)
					(string->number val)
					#f))))
		(if (not (member fieldname (cons "runname" keys))) ;; don't attempt to tweak these
		    (let* ((curr-val (get-var db getqry))
			   (have-it  (or (equal? curr-val val)
					 (equal? curr-val valnum))))
		      (if (not have-it)
			  (sqlite3:execute db setqry (or valnum val) run-id))))))
	    run-meta)))
	run-id))))
  
(define (db:create-initial-run-record dbstruct runname target)	  
  (let* ((keys     (db:get-keys dbstruct))
     	 (targvals (string-split target "/"))
	 (keystr   (string-intersperse keys ","))
	 (key?str  (string-intersperse (make-list (length targvals) "?") ","))
	 (qrystr   (conc "INSERT INTO runs (runname,"keystr") VALUES (?,"key?str")")))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (apply sqlite3:execute db qrystr runname targvals)))))

(define (db:insert-test dbstruct run-id test-rec)
  (let* ((testname  (alist-ref "testname" test-rec equal?))
	 (item-path (alist-ref "item_path" test-rec equal?))
	 (id        (db:get-test-id dbstruct run-id testname item-path))
	 (fieldvals (filter (lambda (x)(not (member (car x) '("id" "last_update")))) test-rec))
	 (setqry    (conc "UPDATE tests SET "(string-intersperse
					      (map (lambda (dat)
						     (conc (car dat)"=?"))
						   fieldvals)
					      ",")" WHERE id=?;"))
	 (insqry   (conc "INSERT INTO tests ("(string-intersperse (map (lambda (x) (car x)) fieldvals) ",")
			 ") VALUES ("(string-intersperse (make-list (length fieldvals) "?") ",")");")))
    (debug:print 0 *default-log-port* "id: "id"\nset: "setqry"\ninsqry: "insqry)
    (db:with-db
     dbstruct
     run-id #f
     (lambda (dbdat db)
       (if id
	   (apply sqlite3:execute db setqry (append (map cdr fieldvals) (list id)))
	   (apply sqlite3:execute db insqry (map cdr fieldvals)))))))

;; replace header and keystr with a call to runs:get-std-run-fields
;;
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
;; runpatts: patt1,patt2 ...
;;
(define (db:get-runs dbstruct runpatt count offset keypatts)
  (let* ((res       '())

		     (set! res (cons (apply vector a x) res)))
		   db
		   qrystr
		   )))
    (debug:print-info 11 *default-log-port* "db:get-runs END qrystr: " qrystr " keypatts: " keypatts " offset: " offset " limit: " count)
    (vector header res)))







;; simple get-runs
;;
;;  records used defined in dbfile
;;
(define (db:simple-get-runs dbstruct runpatt count offset target last-update)
    (let* ((res       '())
	   (keys       (db:get-keys dbstruct))
	   (runpattstr (db:patt->like "runname" runpatt))
	   (remfields  (list "id" "runname" "state" "status" "owner" "event_time"))
	   (targstr    (string-intersperse keys "||'/'||"))

;; TODO: Switch this to use max(update_time) from each run db? Then if using a server there is no disk traffic (using inmem db)
;;
;; NOTE: This DOESN'T (necessarily) get the real run ids, but the number of the <number>.db!!

(define (db:get-changed-run-ids since-time)
  (let* ((dbdir      (db:dbfile-path)) ;; (configf:lookup *configdat* "setup" "dbdir"))
	 (alldbs     (glob (conc dbdir "/.mtdb/[0-9]*.db")))
	 (changed    (filter (lambda (dbfile)
			       (> (file-modification-time dbfile) since-time))
			     alldbs)))
    (delete-duplicates
     (map (lambda (dbfile)
	    (let* ((res (string-match ".*\\/(\\d\\d)\\.db" dbfile)))
	      (if res

			(if offset (conc " OFFSET " offset) "")
			";"))
    (debug:print-info 4 *default-log-port* "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)
    ;(print "runs:get-runs-by-patt qry=" qry-str " " runnamepatt)

    (vector header 
            (reverse
             (db:with-db
	      dbstruct #f #f ;; reads db, does not write to it.
              (lambda (dbdat db)
                (sqlite3:fold-row
                 (lambda (res . r)
                   (cons (list->vector r) res))
                 '()
                 db
                 qry-str
                 runnamepatt)))))))

;; use (get-value-by-header (db:get-header runinfo)(db:get-rows runinfo))
;; NOTE: Does NOT return a list of rows (or one row) for the first slot of the vector
;;       this is inconsistent with get-runs but it makes some sense.
;;
(define (db:get-run-info dbstruct run-id)
  ;;(if (hash-table-ref/default *run-info-cache* run-id #f)

  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
       (if msg
         (sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
         (sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id)))))

(define (db:set-run-state-status-db dbdat db run-id state status )
  (sqlite3:execute
   (db:get-cache-stmth
    dbdat db "UPDATE runs SET status=?,state=? WHERE id=?;") status state run-id))

(define (db:set-run-state-status dbstruct run-id state status )
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)

     (db:set-run-state-status-db dbdat db run-id state status))))
     

(define (db:get-run-status dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	(db:get-cache-stmth
	 dbdat db
	 "SELECT status FROM runs WHERE id=?;" )
	run-id)
       res))))

(define (db:get-run-state dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (status)
	  (set! res status))
	(db:get-cache-stmth
	 dbdat db
	 "SELECT state FROM runs WHERE id=?;" )
	run-id)
       res))))

(define (db:get-run-state-status dbstruct run-id)
  (let ((res (cons "n/a" "n/a")))
    (db:with-db
     dbstruct #f #f
     (lambda (dbdat db)
       (sqlite3:for-each-row 
	(lambda (state status)
	  (set! res (cons state status)))
	(db:get-cache-stmth
	 dbdat db
	 "SELECT state,status FROM runs WHERE id=?;" )
	run-id)
       res))))


;;======================================================================
;; K E Y S
;;======================================================================

    (db:with-db dbstruct run-id #f
		(lambda (dbdat db)
		  (sqlite3:for-each-row
		   (lambda (run-id testname item-path state status)
		     ;; id,run_id,testname,state,status,event_time,host,cpuload,diskfree,uname,rundir,item_path,run_duration,final_logf,comment
		     (set! res (vector test-id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-")))
		   db 
		   "SELECT run_id,testname,item_path,state,status FROM tests WHERE id=? and run_id=?;" 
		   test-id run-id)))
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintest-get-{id ,run_id,testname ...}
;;
(define (db:get-tests-for-run-mindata dbstruct run-id testpatt states statuses not-in)
  (db:get-tests-for-run dbstruct run-id testpatt states statuses #f #f not-in #f #f "id,run_id,testname,state,status,event_time,item_path" 0 #f))

;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   run-id #f

   (lambda (dbdat db)
     (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment))))

(define (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment)
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
		     test-id))
   ((and newstate newstatus)
    (sqlite3:execute db "UPDATE tests SET state=?,status=? WHERE id=?;" newstate newstatus test-id))
   (else
    (if newstate   (sqlite3:execute db "UPDATE tests SET state=?   WHERE id=?;" newstate   test-id))
    (if newstatus  (sqlite3:execute db "UPDATE tests SET status=?  WHERE id=?;" newstatus  test-id))
    (if newcomment (sqlite3:execute db "UPDATE tests SET comment=? WHERE id=?;" newcomment ;; (sdb:qry 'getid newcomment)
				    test-id))))
  ;; (mt:process-triggers dbstruct run-id test-id newstate newstatus)) ;; NOTE: Moved into calling function
  )

;; NEW BEHAVIOR: Count tests running in all runs!
;;
(define (db:get-count-tests-running dbstruct run-id) ;; fastmode)
  (let* ((qry ;; (if fastmode
		;;   "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '') LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND NOT (uname = 'n/a' AND item_path = '');")) ;; )
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let* ((stmth (db:get-cache-stmth dbdat db qry)))
       (sqlite3:first-result stmth))))))

;; NEW BEHAVIOR: Count tests running in only one run!
;;
(define (db:get-count-tests-actually-running dbstruct run-id)
  (db:with-db
   dbstruct

		 ;;  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? LIMIT 1;"
		  "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=?;")) ;; )
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (dbdat db)
       (let* ((stmth (db:get-cache-stmth dbdat db qry)))
	 (sqlite3:first-result stmth run-id))))))

;; For a given testname how many items are running? Used to determine
;; probability for regenerating html
;;
(define (db:get-count-tests-running-for-testname dbstruct run-id testname)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let* ((stmt "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND run_id=? AND NOT (uname = 'n/a' AND item_path = '') AND testname=?;")
	    (stmth (db:get-cache-stmth dbdat db stmt)))
       (sqlite3:first-result
	stmth run-id testname)))))

(define (db:get-not-completed-cnt dbstruct run-id)
(db:with-db
   dbstruct
   run-id

  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (dbr:dbdat-dbh mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let ((res #f))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)
	  ;;                0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived last-update)))
	(db:get-cache-stmth dbdat db
			    (conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id=?;"))
	test-id)
       res))))

;; Get test state, status using test_id
;; 
(define (db:get-test-state-status-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (let ((res (cons #f #f)))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (state status)
	  (cons state status))
	(db:get-cache-stmth dbdat db "SELECT state,status FROM tests WHERE id=?;")
	test-id)
       res))))

;; Use db:test-get* to access
;; Get test data using test_ids. NB// Only works within a single run!!
;;
(define (db:get-test-info-by-ids dbstruct run-id test-ids)

	  ;;                 0    1       2      3      4        5       6      7        8     9     10      11          12          13       14
	  (set! res (cons (apply vector a b) res)))
	db
	(conc "SELECT " db:test-record-qry-selector " FROM tests WHERE id in ("
	      (string-intersperse (map conc test-ids) ",") ");"))
       res))))

;; try every second until tries times proc
;;
(define (db:keep-trying-until-true proc params tries)
  (let* ((res (apply proc params)))
    (if res
	res
	(if (> tries 0)
	    (begin
	      (thread-sleep! 1)
	      (db:keep-trying-until-true proc params (- tries 1)))
	    (begin
	      (debug:print-info 0 *default-log-port* "proc never returned true, params="params)
	      #f)))))
  
(define (db:get-test-info dbstruct run-id test-name item-path)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)
     (db:get-test-info-db db run-id test-name item-path))))

(define (db:get-test-info-db db run-id test-name item-path)
  (let ((res #f))
    (sqlite3:for-each-row
     (lambda (a . b)
       (set! res (apply vector a b)))
     db
     (conc "SELECT " db:test-record-qry-selector " FROM tests WHERE testname=? AND item_path=? AND run_id=?;")
     test-name item-path run-id)
    res))

(define (db:test-get-rundir-from-test-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (dbdat db)

(define (db:get-data-info-by-id dbstruct run-id test-data-id)
  (let* ((stmt        "SELECT id,test_id, category, variable, value, expected, tol, units, comment, status, type, last_update FROM test_data WHERE id=? ORDER BY id ASC;")) ;; event_time DESC,id ASC;
    (db:with-db
     dbstruct
     run-id
     #f
     (lambda (dbdat db)
       (let* ((stmth (db:get-cache-stmth dbdat db stmt))
	      (res   (sqlite3:fold-row
		      (lambda (res id test-id  category variable value expected tol units comment status type last-update)
			(vector id test-id  category variable value expected tol units comment status type last-update))
		      (vector #f #f #f #f #f #f #f #f #f #f #f #f)
		      stmth
		      test-data-id)))
        res)))))

;; if test-name is an integer work off that as test-id instead of test-name test-path
;;
(define (db:set-state-status-and-roll-up-items dbstruct run-id test-name item-path state status comment)
  ;; establish info on incoming test followed by info on top level test
  ;; BBnote - for mode itemwait, linkage between upstream test & matching item status is propagated to run queue in db:prereqs-not-met
  (let* ((testdat      (if (number? test-name)
			   (db:get-test-info-by-id dbstruct run-id test-name) ;; test-name is actually a test-id
			   (db:keep-trying-until-true ;; in our threaded stuff this call could happen before the test is registered (maybe?)
			    db:get-test-info
			    (list dbstruct run-id test-name item-path)
			    10)))
	 (test-id      (db:test-get-id testdat))
	 (test-name    (if (number? test-name)
			   (db:test-get-testname testdat)
			   test-name))
	 (item-path    (db:test-get-item-path testdat))
         (tl-testdat   (db:get-test-info dbstruct run-id test-name ""))
         (tl-test-id   (if tl-testdat
			   (db:test-get-id tl-testdat)
			   #f))
	 (new-state-eh #f)
	 (new-status-eh #f))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(db:general-call dbstruct run-id 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct run-id #f
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status-db db run-id test-id state status comment) ;; this call sets the item state/status
                 (if (not (equal? item-path "")) ;; only roll up IF incoming test is an item
                     (let* ((state-status-counts (db:get-all-state-status-counts-for-test db run-id test-name item-path state status)) ;; item-path is used to exclude current state/status of THIS test
			    (state-statuses      (db:roll-up-rules state-status-counts state status))
                            (newstate            (car state-statuses))
                            (newstatus           (cadr state-statuses)))
		       (set! new-state-eh newstate)
		       (set! new-status-eh newstatus)
                       (debug:print 4 *default-log-port* "BB> tl-test-id="tl-test-id" ; "test-name":"item-path" newstate="newstate" newstatus="newstatus" len(sscs)="(length state-status-counts)  " state-status-counts: "
				    (apply conc
					   (map (lambda (x)
						  (conc
                     				   (with-output-to-string (lambda () (pp (dbr:counts->alist x)))) " | "))
						state-status-counts))); end debug:print

		       (if tl-test-id
			   (db:test-set-state-status-db db run-id tl-test-id newstate newstatus #f)) ;; we are still in the transaction - must access the db and not the dbstruct
		       ))))))
         (mutex-unlock! *db-transaction-mutex*)
         (if (and test-id state status (equal? status "AUTO")) 
             (db:test-data-rollup dbstruct run-id test-id status))
	 (if new-state-eh ;; moved from db:test-set-state-status
	      (mt:process-triggers dbstruct run-id test-id new-state-eh new-status-eh))
         tr-res)))))

(define (db:roll-up-rules state-status-counts state status)
  (if (null? state-status-counts)
      '(#f #f)
      (let* ((running     (length (filter (lambda (x)
					    (member (dbr:counts-state x) *common:running-states*))
					  state-status-counts)))
	     (bad-not-started      (length (filter (lambda (x)
						     (and (equal? (dbr:counts-state x) "NOT_STARTED") 
							  (not (member (dbr:counts-status x)  *common:not-started-ok-statuses*))))
						   state-status-counts)))
	     (all-curr-states      (common:special-sort  ;; worst -> best (sort of)
				    (delete-duplicates
				     (if (and state (not (member state *common:dont-roll-up-states*)))
					 (cons state (map dbr:counts-state state-status-counts))
					 (map dbr:counts-state state-status-counts)))
				    *common:std-states* >))
	     (all-curr-statuses    (common:special-sort  ;; worst -> best
				    (delete-duplicates
				     (if (and state status (not (member state *common:dont-roll-up-states*)))
					 (cons status (map dbr:counts-status state-status-counts))
					 (map dbr:counts-status state-status-counts)))
				    *common:std-statuses* >))
	     (non-completes        (filter (lambda (x)
					     (not (member x (cons "COMPLETED" *common:dont-roll-up-states*))))
					   all-curr-states))
	     (preq-fails        (filter (lambda (x)
					  (equal? x "PREQ_FAIL"))
					all-curr-statuses))
	     (num-non-completes (length non-completes))
	     (newstate          (cond
				 ((> running 0)           "RUNNING")            ;; anything running, call the situation running
				 ((> (length preq-fails) 0) "NOT_STARTED")
				 ((> bad-not-started 0)   "COMPLETED")          ;; we have an ugly situation, it is completed in the sense we cannot do more.
				 ((> num-non-completes 0) (car non-completes))  ;;  (remove (lambda (x)(equal? "COMPLETED" x)) all-curr-states))) ;; only rollup DELETED if all DELETED
				 (else                    (car all-curr-states))))
	     (newstatus         (cond
				 ((> (length preq-fails) 0)  "PREQ_FAIL")
				 ((or (> bad-not-started 0)
				      (and (equal? newstate "NOT_STARTED")
					   (> num-non-completes 0)))
				  "STARTED")
				 (else (car all-curr-statuses)))))
	(debug:print-info 2 *default-log-port*
			  "\n--> probe db:set-state-status-and-roll-up-items: "
			  "\n--> state-status-counts: "(map dbr:counts->alist state-status-counts)
			  "\n--> running:             "running
			  "\n--> bad-not-started:     "bad-not-started
			  "\n--> non-non-completes:   "num-non-completes
			  "\n--> non-completes:       "non-completes
			  "\n--> all-curr-states:     "all-curr-states
			  "\n--> all-curr-statuses:     "all-curr-statuses
			  "\n--> newstate              "newstate
			  "\n--> newstatus            "newstatus
			  "\n\n")
	
	;; NB// Pass the db so it is part of the transaction
	(list newstate newstatus))))

(define (db:set-state-status-and-roll-up-run dbstruct run-id curr-state curr-status)
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct run-id #f
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                   (let* ((state-status-counts (db:get-all-state-status-counts-for-run-db dbdat db run-id))
			  (state-statuses      (db:roll-up-rules state-status-counts #f #f ))
                          (newstate            (car state-statuses))
                          (newstatus           (cadr state-statuses))) 
		     (if (or (not (eq? newstate curr-state)) (not (eq?  newstatus curr-status)))
			 (db:set-run-state-status-db dbdat db run-id newstate newstatus )))))))
         (mutex-unlock! *db-transaction-mutex*)
         tr-res))))

(define (db:get-all-state-status-counts-for-run-db dbdat db run-id)



  (sqlite3:map-row
   (lambda (state status count)
     (make-dbr:counts state: state status: status count: count))
   (db:get-cache-stmth
    dbdat db
    "SELECT state,status,count(id) FROM tests WHERE run_id=?  GROUP BY state,status;")
   run-id ))


(define (db:get-all-state-status-counts-for-run dbstruct run-id)
  (db:with-db
   dbstruct #f #f
   (lambda (dbdat db)
     (db:get-all-state-status-counts-for-run-db dbdat db run-id))))

;; BBnote: db:get-all-state-status-counts-for-test returns dbr:counts object aggregating state and status of items of a given test, *not including rollup state/status*
;;
;; NOTE: This is called within a transaction
;;
(define (db:get-all-state-status-counts-for-test db run-id test-name item-path item-state-in item-status-in)
  (let* ((test-info   (db:get-test-info-db db run-id test-name item-path))
         (item-state  (or item-state-in (db:test-get-state test-info))) 
         (item-status (or item-status-in (db:test-get-status test-info)))
         (other-items-count-recs (sqlite3:map-row



                                  (lambda (state status count)
                                    (make-dbr:counts state: state status: status count: count))
                                  db
                                  ;; ignore current item because we have changed its value in the current transation so this select will see the old value.
                                  "SELECT state,status,count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND item_path !=? GROUP BY state,status;"
                                  run-id test-name item-path))

         ;; add current item to tally outside of sql query
	 (match-countrec-lambda (lambda (countrec) 
				  (and (equal? (dbr:counts-state  countrec) item-state)
                                       (equal? (dbr:counts-status countrec) item-status))))
	 
         (already-have-count-rec-list
          (filter match-countrec-lambda other-items-count-recs)) ;; will have either 0 or 1 count recs depending if another item shares this item's state/status
         
         (updated-count-rec    (if (null? already-have-count-rec-list)
                                   (make-dbr:counts state: item-state status: item-status count: 1)
                                   (let* ((our-count-rec (car already-have-count-rec-list))
                                          (new-count (add1 (dbr:counts-count our-count-rec))))
                                     (make-dbr:counts state: item-state status: item-status count: new-count))))

         (nonmatch-countrec-lambda (lambda (countrec) (not (match-countrec-lambda countrec))))
         
         (unrelated-rec-list   
          (filter nonmatch-countrec-lambda other-items-count-recs)))

    (cons updated-count-rec unrelated-rec-list)))

;; (define (db:get-all-item-states db run-id test-name)
;;   (sqlite3:map-row 
;;    (lambda (a) a)
;;    db
;;    "SELECT DISTINCT state FROM tests WHERE item_path != '' AND state != 'DELETED' AND run_id=? AND testname=?"

;;======================================================================
;; To sync individual run
;;======================================================================
(define (db:get-run-record-ids dbstruct target run keynames test-patt)
   (let* ((backcons (lambda (lst item)(cons item lst)))
         (all_tests '())


         (keystr (string-intersperse 
	                  (map (lambda (key val)
			    (conc key " like '" val "'"))
			     keynames 
			     (string-split target "/"))
		              " AND ")
         )

                  (lambda (dbdat db)
                    (sqlite3:fold-row backcons '() db (conc "SELECT id FROM tests WHERE run_id in (" run_id ") and testname like '" test-patt "'"))
                  )
                )
               ) all_tests
              )
            )






















          )
          run_ids
        )
      `((runs       . ,run_ids)
        (tests      . ,all_tests)


       )
     
   )
)

;;======================================================================
;; Just for sync, procedures to make sync easy
;;======================================================================

;; get an alist of run ids and test/run, test_step/run pairs changed since time since-time
;;   '((runs . (1 2 3 ...))(tests . ((5 . 1) (6 . 3) (6 . 2) (7 . 1)  ...
;;
(define (db:get-changed-record-ids dbstruct since-time)
  ;; no transaction, allow the db to be accessed between the big queries
  (let* ((backcons (lambda (lst item)(cons item lst)))
         (all_tests '())


         (changed_run_dbs (db:get-changed-run-ids since-time)) ;; gets the rundb numbers
         (all_run_ids 
          (db:with-db dbstruct #f #f 
            (lambda (dbdat db)
              (sqlite3:fold-row backcons '() db "SELECT id FROM runs"))
          )
         )
         (changed_run_ids (filter (lambda (run) (member (modulo run 100) changed_run_dbs)) all_run_ids))
         (run_ids 
          (db:with-db dbstruct #f #f 
            (lambda (dbdat db)
              (sqlite3:fold-row backcons '() db "SELECT id FROM runs  WHERE last_update>=?" since-time))
          )
         )






        )
        (for-each
          (lambda (run_id)
           (set! all_tests 
             (append 
               (map (lambda (x) (cons x run_id))                
                (db:with-db dbstruct run_id #f 
                  (lambda (dbdat db)
                    (sqlite3:fold-row backcons '() db "SELECT id FROM tests  WHERE run_id=? and last_update>=?" run_id since-time)
                  )
                )
               ) all_tests
              )
            )






















          )
          changed_run_ids
        )
        (debug:print 2 *default-log-port*  "run_ids = " run_ids)
        (debug:print 2 *default-log-port*  "all_tests = " all_tests)

      `((runs       . ,run_ids)
        (tests      . ,all_tests)



       )
  )
)

;;======================================================================
;; Extract ods file from the db
;;======================================================================

	  #f
        ))))

;; sync for filesystem local db writes
;;
(define (db:run-lock-and-sync no-sync-db)
  (let* ((tmp-area       (common:get-db-tmp-area))
	 (dbfiles        (glob (conc tmp-area"/.mtdb/*.db")))
	 (sync-durations (make-hash-table)))
    ;; (debug:print-info 0 *default-log-port* "lock-and-sync, dbfiles: "dbfiles)
    (for-each
     (lambda (file)
       (let* ((fname (conc (pathname-file file) ".db"))
	      (fulln (conc *toppath*"/.mtdb/"fname))
	      (time1 (if (file-exists? file)
			 (file-modification-time file)
			 (begin
			   (debug:print-info 0 *default-log-port* "Sync - I do not see file "file)
			   1)))
	      (time2 (if (file-exists? fulln)
			 (file-modification-time fulln)

	(sync-stale-seconds (configf:lookup-number *configdat* "server" "sync-stale-seconds" default: 300))
 	(debug-mode         (debug:debug-mode 1))
 	(last-time          (current-seconds))     ;; last time through the sync loop
 	(no-sync-db         (db:open-no-sync-db))
 	(sync-duration      0)  ;; run time of the sync in milliseconds
	(tmp-area           (common:get-db-tmp-area)))
    ;; Sync moved to http-transport keep-running loop

    (debug:print-info 2 *default-log-port* "Periodic copy-based sync thread started. syncer is copy-sync, tmp-area is " tmp-area)
    (debug:print-info 3 *default-log-port* "watchdog starting. syncer is copy-sync pid="(current-process-id));;  " this-wd-num="this-wd-num)
    
    (if (and legacy-sync (not *time-to-exit*))
 	(begin
 	  (debug:print-info 0 *default-log-port* "Server running, periodic copy-based sync started.")
	  (let loop ()

       (sync-stale-seconds (configf:lookup-number *configdat* "server" "sync-stale-seconds" default: 300))
 	(debug-mode   (debug:debug-mode 1))
 	(last-time    (current-seconds))
 	(no-sync-db   (db:open-no-sync-db))
 	(stmt-cache   #f) ;; (dbr:dbstruct-stmt-cache dbstruct))
 	(sync-duration 0) ;; run time of the sync in milliseconds
       (subdbs       (hash-table-values (dbr:dbstruct-subdbs dbstruct))))

   (debug:print-info 2 *default-log-port* "Periodic sync thread started.")
   (debug:print-info 3 *default-log-port* "watchdog starting. legacy-sync is " legacy-sync" pid="(current-process-id)  );;  " this-wd-num="this-wd-num)
   
   (if (and legacy-sync (not *time-to-exit*))
 	(begin
 	  (debug:print-info 0 *default-log-port* "Server running, periodic sync started.")
	  (let loop ()

				  (let ((db (cdr *task-db*)))
				    (if (sqlite3:database? db)
					(begin
					  (sqlite3:interrupt! db)
					  (sqlite3:finalize! db #t)
					  ;; (vector-set! *task-db* 0 #f)
					  (set! *task-db* #f)))))
			      (if (and *no-sync-db*
				       (sqlite3:database? *no-sync-db*))
				  (sqlite3:finalize! *no-sync-db* #t))
			      (if (and (not (args:get-arg "-server"))
				       *runremote*
				       (eq? (rmt:transport-mode) 'http))
				  (begin
				    (debug:print-info 0 *default-log-port* "Closing all client connections...")
				    (http-transport:close-connections *runremote*)
				    #;(http-client#close-all-connections!)))
                              ;; (if (and *runremote*
                              ;;          (remote-conndat *runremote*))
                              ;;     (begin
                              ;;       (http-client#close-all-connections!))) ;; for http-client
                              (if (not (eq? *default-log-port* (current-error-port)))
                                  (close-output-port *default-log-port*))
			      (set! *default-log-port* (current-error-port))) "Cleanup db exit thread"))