Megatest

Makefile.installall at [8f71552216]
Login

File utils/Makefile.installall artifact 98a3761faa part of check-in 8f71552216



# Copyright 2013-2015 Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

help :
	@echo You may need to do the following setup first:
	@echo
	@echo sudo apt-get install libreadline-dev
	@echo sudo apt-get install libwebkitgtk-dev libfreetype6-dev libx11-dev libxpm-dev libxmu-dev \
	           libxft-dev libgtk2.0-dev libgl1-mesa-dev libglu1-mesa-dev libpangox-1.0-dev bison \
                   libwebkitgtk-3.0-dev
	@echo   -- nb// adding monodevelop gets more packages of which some might be needed...
	@echo sudo apt-get install libmotif3
	@echo
	@echo Set up your PATH, setting it in the Makefile does not work as expected
	@echo export PATH=$(PREFIX)/bin:\$$PATH
	@echo
	@echo For IUP set IUPBRANCH, currently $(IUPBRANCH)
	@echo         set IUPCONFIG, currently $(IUPCONFIG) - look in https://www.kiatoa.com/fossils/iuplib for .inc files
	@echo You are using PREFIX=$(PREFIX)
	@echo You are using PROXY="$(PROXY)"
	@echo If needed set PROXY to host.dom:port
	@echo   http_proxy=$(http_proxy)
	@echo 
	@echo To make all do: make all
	@echo   make minimal: make nogui
	@echo 
	@echo Note: If compiling on amd64 do CSC_OPTIONS=\'-C "-fPIC"\' make all IUPCONFIG=

FPIC=-C "-fPIC"

# Put the installation here
ifeq ($(PREFIX),)
PREFIX=$(PWD)/target
endif

# Set this on the command line of your make call if needed: make PROXY=host.com:1234
PROXY=

# http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
# http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
# Select version of chicken, sqlite3 etc
# CHICKEN_VERSION=4.10.0
CHICKEN_VERSION=4.11.0
SQLITE3_VERSION=3090200
# http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# http://www.sqlite.org/2015/sqlite-autoconf-3081101.tar.gz
# Override IUPBRANCH to use other than trunk
IUPBRANCH=trunk
IUPCONFIG=ubuntu-15.04.inc
# iup-3.15

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
     dot-locking posix-utils posix-extras hostinfo tcp-server rpc csv-xml fmt \
     json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars pathname-expand \
     spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
     srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables hahn linenoise \
     crypt parley

#
# Derived variables
#

ifeq ($(PROXY),)
PROX:=
else
http_proxy:=http://$(PROXY)
PROX:=-proxy $(PROXY)
endif

BUILDHOME=$(PWD)
PATH:=$(PREFIX)/bin:$(PATH)
LIBPATH=$(PREFIX)/lib$(ADDITIONAL_LIBPATH)
LD_LIBRARY_PATH=$(LIBPATH)
CHICKEN_INSTALL=$(PREFIX)/bin/chicken-install
CHICKEN_EGG_DIR=$(PREFIX)/lib/chicken/8

VPATH=$(CHICKEN_EGG_DIR):$(PWD)/eggflags

vpath %.so $(CHICKEN_EGG_DIR)
vpath %.flag eggflags

EGGSOFILES=$(addprefix $(CHICKEN_EGG_DIR)/,$(addsuffix .so,$(EGGS)))
EGGFLAGS=$(addprefix eggflags/,$(addsuffix .flag,$(EGGS)))

# Stuff needed for IUP
ISARCHX86_64=$(shell uname -a | grep x86_64)
ifeq ($(ISARCHX86_64),)
ARCHSIZE=
else
ARCHSIZE=64_
endif

CSCLIBS=$(shell echo $(LD_LIBRARY_PATH) | sed 's/:/ -L/g')
CSC_OPTIONS="-I$(PREFIX)/include -L$(CSCLIBS) -C -fPIC"
# CSC_OPTIONS=-I $(PREFIX)/include -L $(CSCLIBS)

nogui : base mutils

#all : nogui libiup $(PREFIX)/lib/sqlite3.so
all : nogui libiup

base : chkn eggs 

# stuff needed for Kiatoa and Megatest from matts miscellaneous stash
#   NOTE TO SELF: eggifying these would be great...
mutils : base logprobin $(PREFIX)/bin/hs \
        $(PREFIX)/lib/chicken/8/mutils.so \
        $(PREFIX)/lib/chicken/8/dbi.so \
        $(PREFIX)/lib/chicken/8/stml.so \
        $(PREFIX)/lib/chicken/8/margs.so

chkn : $(CHICKEN_INSTALL)

eggs : $(EGGSOFILES)

# libiup : $(PREFIX)/lib/libavcall.a 
libiup : $(CHICKEN_EGG_DIR)/iup.so $(CHICKEN_EGG_DIR)/canvas-draw.so

logprobin : $(PREFIX)/bin/logpro

$(PREFIX)/bin/logpro : $(CHICKEN_EGG_DIR)/regex-literals.so
	$(CHICKEN_INSTALL) logpro

# Silly rule to make installing eggs more makeish, I don't understand why I need the basename
$(CHICKEN_EGG_DIR)/%.so : eggflags/%.flag
	$(CHICKEN_INSTALL) $(PROX) -keep-installed $(shell basename $*)

$(EGGFLAGS) : # $(CHICKEN_INSTALL)
	mkdir -p eggflags
	touch $(EGGFLAGS)

# some setup stuff
#
#$(PREFIX)/setup-chicken4x.sh : $(EGGFLAGS)
$(PREFIX)/setup-chicken4x.sh : 
	mkdir -p $(PREFIX)
	(echo 'export PATH=$(PREFIX)/bin:$$PATH' > $(PREFIX)/setup-chicken4x.sh)
	(echo "export LD_LIBRARY_PATH=$(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.sh)

$(PREFIX)/setup-chicken4x.csh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo "setenv PATH $(PREFIX):'$$'PATH" > $(PREFIX)/setup-chicken4x.csh)
	(echo "setenv LD_LIBRARY_PATH $(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.csh)

# NOTE: the touch chicken-core/chicken.scm compensates for the time stamp from the tar file
chicken-core/chicken.scm : chicken-$(CHICKEN_VERSION).tar.gz
	tar xzf chicken-$(CHICKEN_VERSION).tar.gz
	ln -sf chicken-$(CHICKEN_VERSION) chicken-core
	if [[ -e chicken-core/chicken.scm ]];then touch chicken-core/chicken.scm;fi

chicken-4.11.0.tar.gz :
	wget http://code.call-cc.org/releases/4.11.0/chicken-4.11.0.tar.gz

# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git

$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh
	pwd; env; which make
	cd chicken-core; make PLATFORM=linux PREFIX=$(PREFIX)
	cd chicken-core; make PLATFORM=linux PREFIX=$(PREFIX) install
	#cd chicken-core;env -i PATH=${PATH} LD_LIBRARY_PATH=${LD_LIBRARY_PATH} make PLATFORM=linux PREFIX=$(PREFIX)
	#cd chicken-core;env -i PATH=${PATH} LD_LIBRARY_PATH=${LD_LIBRARY_PATH} make PLATFORM=linux PREFIX=$(PREFIX) install

#======================================================================
# S Q L I T E 3
#======================================================================
# https://www.sqlite.org/2015/sqlite-autoconf-3090200.tar.gz
sqlite-autoconf-$(SQLITE3_VERSION).tar.gz :
	wget  http://www.sqlite.org/2015/sqlite-autoconf-$(SQLITE3_VERSION).tar.gz

sqlite-autoconf-$(SQLITE3_VERSION)/config.log : sqlite-autoconf-$(SQLITE3_VERSION).tar.gz
	tar xf  sqlite-autoconf-$(SQLITE3_VERSION).tar.gz

$(PREFIX)/bin/sqlite3 : sqlite-autoconf-$(SQLITE3_VERSION)/config.log
	cd sqlite-autoconf-$(SQLITE3_VERSION);./configure --prefix=$(PREFIX);make;make install

$(CHICKEN_EGG_DIR)/sqlite3.so : $(PREFIX)/bin/sqlite3
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) sqlite3

#======================================================================
# N  A N O M S G
#======================================================================

# # https://github.com/nanomsg/nanomsg/releases/download/0.6-beta/nanomsg-0.6-beta.tar.gz
# # https://github.com/nanomsg/nanomsg/releases/download/0.8-beta/nanomsg-0.8-beta.tar.gz

# nanomsg-0.6-beta.tar.gz :
# 	wget http://download.nanomsg.org/nanomsg-0.6-beta.tar.gz

# nanomsg-0.6-beta/COPYING : nanomsg-0.6-beta.tar.gz
# 	tar xf nanomsg-0.6-beta.tar.gz

# $(PREFIX)/bin/nanocat : nanomsg-0.6-beta/COPYING
# 	cd nanomsg-0.6-beta;./configure --prefix=$(PREFIX);make;make install

# $(PREFIX)/lib/nanomsg.so : $(PREFIX)/bin/nanocat
# 	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) nanomsg

# # LD_LIBRARY_PATH=/mfs/pkgs/chicken/4.10.0-amd64/lib CSC_OPTIONS="-I/mfs/pkgs/chicken/4.10.0-amd64/include -L/mfs/pkgs/chicken/4.10.0-amd64/lib -C \"-fPIC\"" /mfs/pkgs/chicken/4.10.0-amd64/bin/chicken-install  -D no-library-checks nanomsg

#======================================================================
# M A T T S   U T I L S
#======================================================================

# opensrc

opensrc.fossil :
	fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil

opensrc/histstore/histstore.scm : opensrc.fossil
	mkdir -p opensrc
	cd opensrc;if [ -e .fslckout ];then fossil update; else fossil open ../opensrc.fossil; fi

$(PREFIX)/lib/chicken/8/mutils.so : opensrc/histstore/histstore.scm
	cd opensrc/mutils;chicken-install

$(PREFIX)/lib/chicken/8/dbi.so : opensrc/dbi/dbi.scm
	cd opensrc/dbi;chicken-install

$(PREFIX)/lib/chicken/8/margs.so : opensrc/margs/margs.scm
	cd opensrc/margs;chicken-install

opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(CHICKEN_EGG_DIR)/sqlite3.so 
	env | grep CSC
	cd opensrc/histstore; $(PREFIX)/bin/csc histstore.scm -o hs

$(PREFIX)/bin/hs : opensrc/histstore/hs 
	cp -f opensrc/histstore/hs $(PREFIX)/bin/hs

# stml
stml.fossil :
	fossil clone http://www.kiatoa.com/fossils/stml stml.fossil

# open touches the .fossil :(
stml/requirements.scm.template : stml.fossil
	mkdir -p stml
	cd stml;if [ -e .fslckout ];then fossil update; else fossil open ../stml.fossil;fi

stml/requirements.scm : stml/requirements.scm.template
	cp stml/install.cfg.template      stml/install.cfg
	cp stml/requirements.scm.template stml/requirements.scm

$(PREFIX)/lib/chicken/8/stml.so : stml/requirements.scm
	cd stml; make

#======================================================================
# F F C A L L (Used by IUP)
#======================================================================

ffcall.fossil :
	fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil

ffcall/README : ffcall.fossil
	mkdir -p ffcall
	cd ffcall && if [ -e README ];then fossil update; else fossil open ../ffcall.fossil; fi

# NOTE: This worked fine *without* the enable-shared
#
$(PREFIX)/lib/libavcall.a : ffcall/README
	cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make CC="gcc -fPIC" && make install

#======================================================================
# I U P 
#======================================================================

iuplib.fossil :
	fossil clone http://www.kiatoa.com/fossils/iuplib iuplib.fossil

cd-5.9_Linux26g4_64_lib.tar.gz :
	wget --no-check-certificate -c http://sourceforge.net/projects/canvasdraw/files/5.9/Linux%20Libraries/cd-5.9_Linux26g4_64_lib.tar.gz/download
	mv download cd-5.9_Linux26g4_64_lib.tar.gz

cd-5.10_Linux26g4_64_lib.tar.gz :
	cp /p/fdk/gwa/jmoon18/cd-5.10_Linux26g4_64_lib.tar.gz cd-5.10_Linux26g4_64_lib.tar.gz

iup-3.17_Linux26g4_64_lib.tar.gz :
	cp /p/fdk/gwa/jmoon18/iup-3.17_Linux26g4_64_lib.tar.gz  iup-3.17_Linux26g4_64_lib.tar.gz
#	wget --no-check-certificate -c http://sourceforge.net/projects/iup/files/3.17/Linux%20Libraries/iup-3.17_Linux26g4_64_lib.tar.gz/download
#	mv download iup-3.17_Linux26g4_64_lib.tar.gz

iup-3.19.1_Linux26g4_64_lib.tar.gz :
	cp /p/fdk/gwa/jmoon18/iup-3.19.1_Linux26g4_64_lib.tar.gz iup-3.19.1_Linux26g4_64_lib.tar.gz

im-3.10_Linux26g4_64_lib.tar.gz :
	wget --no-check-certificate -c http://sourceforge.net/projects/imtoolkit/files/3.10/Linux%20Libraries/im-3.10_Linux26g4_64_lib.tar.gz/download
	mv download im-3.10_Linux26g4_64_lib.tar.gz

im-3.11_Linux26g4_64_lib.tar.gz :
	cp /p/fdk/gwa/jmoon18/im-3.11_Linux26g4_64_lib.tar.gz im-3.11_Linux26g4_64_lib.tar.gz

lua-5.3.2_Linux26g4_64_lib.tar.gz :
	wget --no-check-certificate -c http://sourceforge.net/projects/luabinaries/files/5.3.2/Linux%20Libraries/lua-5.3.2_Linux26g4_64_lib.tar.gz/download
	mv download lua-5.3.2_Linux26g4_64_lib.tar.gz

lua-5.3.3_Linux26g4_64_lib.tar.gz :
	cp /p/fdk/gwa/jmoon18/lua-5.3.3_Linux26g4_64_lib.tar.gz lua-5.3.3_Linux26g4_64_lib.tar.gz

iup/installall.sh : $(PREFIX)/lib/libiup.so \
                       cd-5.10_Linux26g4_64_lib.tar.gz \
                       iup-3.17_Linux26g4_64_lib.tar.gz \
                       im-3.11_Linux26g4_64_lib.tar.gz \
		       lua-5.3.3_Linux26g4_64_lib.tar.gz	# iuplib.fossil
	mkdir -p iup
	pwd
	tar -xzvf cd-5.10_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf im-3.11_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf iup-3.17_Linux26g4_64_lib.tar.gz -C iup/
	mkdir -p $(PREFIX)/include/ $(PREFIX)/lib/
	cp iup/include/* $(PREFIX)/include/
	cp iup/*.so $(PREFIX)/lib/
	cp iup/*.a $(PREFIX)/lib/

#	cd iup && if [ -e makeall.sh ];then fossil update $(IUPBRANCH); else fossil open ../iuplib.fossil;fossil update $(IUPBRANCH); fi

iup/alldone :  $(PREFIX)/include/iup.h $(PREFIX)/lib/libiup.so # iup/makeall.sh
#	cd iup && ./makeall.sh $(IUPCONFIG)

$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh iup/alldone
#	cd iup && ./makeall.sh $(IUPCONFIG)

# $(PREFIX)/lib/libiup.so : iup/iup/alldone
#	touch -c $(PREFIX)/lib/libiup.so

$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup

# -feature disable-iup-web

$(CHICKEN_EGG_DIR)/canvas-draw.so :  $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw


clean :
	rm -rf chicken-4.11.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)