Megatest

      (debug:print 0 "ERROR: bad value for setenv, key=" key ", value=" val)))

(define home (getenv "HOME"))
(define user (getenv "USER"))

;; GLOBAL GLETCHES
(define *db-keys* #f)

(define *configinfo* #f)
(define *configdat*  #f)
(define *toppath*    #f)
(define *configinfo*   #f)   ;; raw results from setup, includes toppath and table from megatest.config
(define *runconfigdat* #f)   ;; run configs data
(define *configdat*    #f)   ;; megatest.config data
(define *configstatus* #f)   ;; status of data; 'fulldata : all processing done, #f : no data yet, 'partialdata : partial read done
(define *toppath*      #f)
(define *already-seen-runconfig-info* #f)

(define *waiting-queue*     (make-hash-table))
(define *test-meta-updated* (make-hash-table))
(define *globalexitstatus*  0) ;; attempt to work around possible thread issues
(define *passnum*           0) ;; when running track calls to run-tests or similar
(define *write-frequency*   (make-hash-table)) ;; run-id => (vector (current-seconds) 0))
(define *alt-log-file* #f)  ;; used by -log
(define *common:denoise*    (make-hash-table)) ;; for low noise printing

			    "%"))
	 (testpatt    (or (and (equal? args-testpatt "%")
			       rtestpatt)
			  args-testpatt)))
    (if rtestpatt (debug:print-info 0 "TESTPATT from runconfigs: " rtestpatt))
    testpatt))

(define (common:get-linktree)
  (or (getenv "MT_LINKTREE")
      (if *configdat*
	  (configf:lookup *configdat* "setup" "linktree"))))

(define (common:args-get-runname)
  (or (args:get-arg "-runname")
      (args:get-arg ":runname")
      (getenv "MT_RUNNAME")))
  (let ((res (or (args:get-arg "-runname")
		 (args:get-arg ":runname")
		 (getenv "MT_RUNNAME"))))
    ;; (if res (set-environment-variable "MT_RUNNAME" res)) ;; not sure if this is a good idea. side effect and all ...
    res))

(define (common:args-get-target #!key (split #f))
  (let* ((keys    (keys:config-get-fields *configdat*))
  (let* ((keys    (if *configdat* (keys:config-get-fields *configdat*) '()))
	 (numkeys (length keys))
	 (target  (if (args:get-arg "-reqtarg")
		      (args:get-arg "-reqtarg")
		      (if (args:get-arg "-target")
			  (args:get-arg "-target")
			  (getenv "MT_TARGET"))))
	 (tlist   (if target (string-split target "/" #t) '()))

		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

(if (not (launch:setup-for-run))
(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

(define *useserver* (cond
		     ((args:get-arg "-use-local") #f)
		     ((configf:lookup *configdat* "dashboard" "use-server")

;;  'old2new      - sync megatest.db records to .db/{main,1,2 ...}.db
;;  'new2old      - sync .db/{main,1,2,3 ...}.db to megatest.db
;;  'closeall     - close all opened dbs
;;
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync run-ids . options)
  (let* ((toppath  (launch:setup-for-run))
  (let* ((toppath  (launch:setup))
	 (dbstruct (if toppath (make-dbr:dbstruct path: toppath) #f))
	 (mtdb     (if toppath (db:open-megatest-db)))
	 (allow-cleanup (if run-ids #f #t))
	 (run-ids  (if run-ids 
		       run-ids
		       (if toppath (begin
				     (db:delay-if-busy mtdb)

	      (debug:print 0 "ERROR: test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup-for-run force: #t))
	  (if (not (launch:setup force: #t))
	      (begin
		(debug:print 0 "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)
		;; (sqlite3:finalize! tdb)
		(exit 1)))
	  (change-directory *toppath*) 

					    (ezstepslst (if (hash-table? testconfig)
							    (hash-table-ref/default testconfig "ezsteps" '())
							    #f)))
				       (if testconfig
					   (hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
					   (begin
					     ;; got here but there are race condiitions - re-do all setup and try one more time
					     (if (launch:setup-for-run)
					     (if (launch:setup)
						 (begin
						   (launch:cache-config)
						   (set! testconfig (full-runconfigs-read))) ;; redunantly redundant, but does it resolve the race?
					     (debug:print 0 "WARNING: no testconfig found for " test-name " in search path:\n  "
							  (string-intersperse (tests:get-tests-search-path *configdat*) "\n  ")))))
				       ;; after all that, still no testconfig? Time to abort
				       (if (not testconfig)
					   (begin
					     (debug:print 0 "ERROR: Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
					     (exit 1)))s
					     (exit 1)))
				       (if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
				       ;; if ezsteps was defined then we are sure to have at least one step but check anyway
				       (if (not (> (length ezstepslst) 0))
					   (debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
					   (let loop ((ezstep (car ezstepslst))
						      (tal    (cdr ezstepslst))
						      (prevstep #f))

	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area " 
			 work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")
	    (if (not (launch:einf-exit-status exit-info))
		(exit 4)))))))

(define (launch:cache-config)
  ;; if we have a linktree and -runtests and -target and the directory exists dump the config
  ;; to megatest-(current-seconds).cfg and symlink it to megatest.cfg
  (if (and *configdat* 
	   (or (args:get-arg "-run")
	       (args:get-arg "-runtests")
	       (args:get-arg "-execute")))
      (let* ((linktree (get-environment-variable "MT_LINKTREE"))
	     (target   (common:args-get-target))
	     (runname  (or (args:get-arg "-runname")
			   (args:get-arg ":runname")
			   (getenv "MT_RUNNAME")))
	     (fulldir  (conc linktree "/"
			     target "/"
			     runname)))
	(debug:print-info 0 "Have -runtests with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
	(if (file-exists? linktree) ;; can't proceed without linktree
	    (begin
	      (if (not (file-exists? fulldir))
		  (create-directory fulldir #t)) ;; need to protect with exception handler 
	      (if (and target
		       runname
		       (file-exists? fulldir))
		  (let ((tmpfile  (conc fulldir "/.megatest.cfg." (current-seconds)))
			(targfile (conc fulldir "/.megatest.cfg-"  megatest-version "-" megatest-fossil-hash))
			(rconfig  (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
		    (if (file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
			(begin
			  (debug:print-info 0 "Caching megatest.config in " fulldir "/.megatest.cfg")
			  (configf:write-alist *configdat* tmpfile)
			  (system (conc "ln -sf " tmpfile " " targfile))))
		    )))))))

;; set up the very basics needed for doing anything here.
;;
(define (launch:setup-for-run #!key (force #f))
(define (launch:setup-old #!key (force #f))
  ;; would set values for KEYS in the environment here for better support of env-override but 
  ;; have chicken/egg scenario. need to read megatest.config then read it again. Going to 
  ;; pass on that idea for now
  ;; special case
  (if (or force (not (hash-table? *configdat*)))  ;; no need to re-open on every call
      (begin
	(set! *configinfo* (or (if (get-environment-variable "MT_CMDINFO") ;; we are inside a test - do not reprocess configs

	      (setenv "MT_RUN_AREA_HOME" *toppath*)
	      (begin
		(debug:print 0 "ERROR: failed to find the top path to your Megatest area.")
		(exit 1)))
	  )))
  *toppath*)

(define (launch:cache-config)
  ;; if we have a linktree and -runtests and -target and the directory exists dump the config
  ;; to megatest-(current-seconds).cfg and symlink it to megatest.cfg
  (if (and *configdat* 
	   (or (args:get-arg "-run")
	       (args:get-arg "-runtests")
	       (args:get-arg "-execute")))
      (let* ((linktree (get-environment-variable "MT_LINKTREE"))
	     (target   (common:args-get-target))
	     (runname  (or (args:get-arg "-runname")
			   (args:get-arg ":runname")
			   (getenv "MT_RUNNAME")))
	     (fulldir  (conc linktree "/"
			     target "/"
			     runname)))
	(debug:print-info 0 "Have -runtests with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
	(if (file-exists? linktree) ;; can't proceed without linktree
	    (begin
	      (if (not (file-exists? fulldir))
		  (create-directory fulldir #t)) ;; need to protect with exception handler 
	      (if (and target
		       runname
		       (file-exists? fulldir))
		  (let ((tmpfile  (conc fulldir "/.megatest.cfg." (current-seconds)))
			(targfile (conc fulldir "/.megatest.cfg-"  megatest-version "-" megatest-fossil-hash))
			(rconfig  (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
		    (if (file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
			(begin
			  (debug:print-info 0 "Caching megatest.config in " fulldir "/.megatest.cfg")
			  (configf:write-alist *configdat* tmpfile)
			  (system (conc "ln -sf " tmpfile " " targfile))))
		    )))))))

;; gather available information, if legit read configs in this order:
;;
;;   if have cache;
;;      read it a return it
;;   else
;;     megatest.config     (do not cache)
;;     runconfigs.config   (cache if all vars avail)
;;     megatest.config     (cache if all vars avail)
;;   returns:
;;     *toppath*
;;   side effects:
;;     sets; *configdat*    (megatest.config info)
;;           *runconfigdat* (runconfigs.config info)
;;           *configstatus* (status of the read data)
;;
(define (launch:setup #!key (force #f))
(define (launch:setup-new #!key (force #f))
  (let* ((runname  (common:args-get-runname))
	 (target   (common:args-get-target))
	 (linktree (or (getenv "MT_LINKTREE")
	 (linktree (common:get-linktree))
		       (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f)))
	 (rundir   (if (and runname target linktree)(conc linktree "/" target "/" runname) #f))
	 (mtcachef (and rundir (conc rundir "/" ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
	 (rccachef (and rundir (conc rundir "/" ".runconfigs.cfg-"  megatest-version "-" megatest-fossil-hash))))
    #f))
	 (rccachef (and rundir (conc rundir "/" ".runconfigs.cfg-"  megatest-version "-" megatest-fossil-hash)))
	 (cancreate (and rundir (file-exists? rundir)(file-write-access? rundir))))
    (print "runname: " runname " target: " target " mtcachef: " mtcachef " rccachef: " rccachef)
    (cond
     ;; data was read and cached and available in *configstatus*
     ((eq? *configstatus* 'fulldata)
      *toppath*)
     ;; if mtcachef exists just read it
     ((and mtcachef (file-exists? mtcachef))
      (set! *configdat*    (configf:read-alist mtcachef))
      (set! *runconfigdat* (configf:read-alist rccachef))
      (set! *configinfo*   (list *configdat*  (get-environment-variable "MT_RUN_AREA_HOME")))
      (set! *configstatus* 'fulldata)
      *toppath*)
     ;; we have all the info needed to fully process runconfigs and megatest.config
     (mtcachef              
      (let ((first-pass (find-and-read-config 
				  (or (args:get-arg "-config") "megatest.config")
				  environ-patt: "env-override"
				  given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
				  pathenvvar: "MT_RUN_AREA_HOME")))
	(if first-pass
	    (begin
	      (set! *configdat*  (car first-pass))
	      (set! *configinfo* first-pass)
	      (set! *toppath*    (cadr first-pass))
	      ;; the seed read is done, now read runconfigs, cache it then read megatest.config one more time and cache it
	      (let* ((keys     (rmt:get-keys))
		     (key-vals (if target (keys:target->keyval keys target) #f))
		     (sections (if target (list "default" target) #f)) ;; for runconfigs
		     (linktree (or (getenv "MT_LINKTREE")
				   (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f)))
		     (runconfigdat (begin
				     (setenv "MT_RUN_AREA_HOME" *toppath*)
				     (if key-vals
					 (for-each (lambda (kt)
						     (setenv (car kt) (cadr kt)))
						   key-vals))
				     (read-config (conc *toppath* "/runconfigs.config") #f #t sections: sections))))
		(if cancreate (configf:write-alist runconfigdat rccachef))
		(set! *runconfigdat* runconfigdat)
		(let ((second-pass (find-and-read-config 
				    (or (args:get-arg "-config") "megatest.config")
				    environ-patt: "env-override"
				    given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
				    pathenvvar: "MT_RUN_AREA_HOME")))
		  (if cancreate (configf:write-alist (car second-pass) mtcachef))
		  (set! *configdat* (car second-pass))
		  (set! *toppath*   (cadr second-pass))
		  (if cancreate (set! *configstatus* 'fulldata)))))
	    ;; no configs found? should not happen but let's try to recover gracefully, return an empty hash-table
	    (set! *configdat* (make-hash-table))
	    )))
     ;; else read what you can and set the flag accordingly
     (else
      (let* ((cfgdat   (find-and-read-config 
			(or (args:get-arg "-config") "megatest.config")
			environ-patt: "env-override"
			given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
			pathenvvar: "MT_RUN_AREA_HOME"))
	     (sections (if target (list "default" target) #f))
	     (rdat     (read-config (conc (or *toppath* (get-environment-variable "MT_RUN_AREA_HOME")(cadr cfgdat))
					  "/runconfigs.config") #f #t sections: sections)))
	(set! *configinfo*   cfgdat)
	(set! *configdat*    (car cfgdat))
	(set! *runconfigdat* rdat)
	(set! *toppath*      (cadr cfgdat))
	(set! *configstatus* 'partial))))
    ;; final house keeping
    (let* ((keys     (rmt:get-keys))
	   (key-vals (if target (keys:target->keyval keys target) #f))
	   (sections (if target (list "default" target) #f)) ;; for runconfigs
	   (linktree (or (getenv "MT_LINKTREE")
			 (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f))))
      (if linktree
	  (if (not (file-exists? linktree))
	      (begin
		(handle-exceptions
		 exn
		 (begin
		   (debug:print 0 "ERROR: Something went wrong when trying to create linktree dir at " linktree)
		   (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
		   (exit 1))
		 (create-directory linktree #t))))
	  (begin
	    (debug:print 0 "ERROR: linktree not defined in [setup] section of megatest.config")
	    ;; (exit 1)
	    )))
    (if (and *toppath*
	     (directory-exists? *toppath*))
	(setenv "MT_RUN_AREA_HOME" *toppath*)
	(begin
	  (debug:print 0 "ERROR: failed to find the top path to your Megatest area.")))
    *toppath*))

(define launch:setup launch:setup-new)

(define (get-best-disk confdat testconfig)
  (let* ((disks   (or (and testconfig (hash-table-ref/default testconfig "disks" #f))
		      (hash-table-ref/default confdat "disks" #f)))
	 (minspace (let ((m (configf:lookup confdat "setup" "minspace")))
		     (string->number (or m "10000")))))
    (if disks 

(if (args:get-arg "-env2file")
    (begin
      (save-environment-as-files (args:get-arg "-env2file"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-disks")
    (let ((toppath (launch:setup-for-run)))
    (let ((toppath (launch:setup)))
      (print 
       (string-intersperse 
	(map (lambda (x)
	       (string-intersperse 
		x
		" => "))
	     (common:get-disks *configdat*))

;;   we start the server if not running else start the client thread
;;======================================================================

(if (args:get-arg "-server")

    ;; Server? Start up here.
    ;;
    (let ((tl        (launch:setup-for-run))
    (let ((tl        (launch:setup))
	  (run-id    (and (args:get-arg "-run-id")
			  (string->number (args:get-arg "-run-id")))))
      (if run-id
	  (begin
	    (server:launch run-id)
	    (set! *didsomething* #t))
	  (debug:print 0 "ERROR: server requires run-id be specified with -run-id")))

    ;; Not a server? This section will decide how to communicate
    ;;
    ;;  Setup client for all expect listed here
    (if (null? (lset-intersection 
		equal?
		(hash-table-keys args:arg-hash)
		'("-list-servers"
		  "-stop-server"
		  "-show-cmdinfo"
		  "-list-runs"
		  "-ping")))
	(if (launch:setup-for-run)
	(if (launch:setup)
	    (let ((run-id    (and (args:get-arg "-run-id")
				  (string->number (args:get-arg "-run-id")))))
	      ;; (set! *fdb*   (filedb:open-db (conc *toppath* "/db/paths.db")))
	      ;; if not list or kill then start a client (if appropriate)
	      (if (or (args-defined? "-h" "-version" "-gen-megatest-area" "-gen-megatest-test")
		      (eq? (length (hash-table-keys args:arg-hash)) 0))
		  (debug:print-info 1 "Server connection not needed")
		  (begin
		    ;; (if run-id 
		    ;;     (client:launch run-id) 
		    ;;     (client:launch 0)      ;; without run-id we'll start a server for "0"
		    #t
		    ))))))

;; MAY STILL NEED THIS
;;		       (set! *megatest-db* (make-dbr:dbstruct path: *toppath* local: #t))))))))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (launch:setup-for-run)))
    (let ((tl (launch:setup)))
      (if tl 
	  (let* ((tdbdat  (tasks:open-db))
		 (servers (tasks:get-all-servers (db:delay-if-busy tdbdat)))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))

		(configf:write-alist data cfgf)
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup-for-run force: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))

(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup-for-run)))
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))
	;; keep this one local
	(cond
	 ((and (args:get-arg "-section")
	       (args:get-arg "-var"))
	  (let ((val (or (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))

	  (configf:config->ini data))
	 (else
	  (debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	(set! *didsomething* #t))
      (pop-directory)))

(if (args:get-arg "-show-config")
    (let ((tl   (launch:setup-for-run))
    (let ((tl   (launch:setup))
	  (data *configdat*)) ;; (read-config "megatest.config" #f #t)))
      (push-directory *toppath*)
      ;; keep this one local
      (cond 
       ((and (args:get-arg "-section")
	     (args:get-arg "-var"))
	(let ((val (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))))

;; NOTE: list-runs and list-db-targets operate on local db!!!
;;
;; IDEA: megatest list -runname blah% ...
;;
(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (launch:setup-for-run)
    (if (launch:setup)
	(let* (;; (dbstruct    (make-dbr:dbstruct path: *toppath* local: (args:get-arg "-local")))
	       (runpatt     (args:get-arg "-list-runs"))
	       (testpatt    (common:args-get-testpatt #f))
	       ;; (if (args:get-arg "-testpatt") 
	       ;;  	        (args:get-arg "-testpatt") 
	       ;;  	        "%"))
	       (keys        (rmt:get-keys)) ;; (db:get-keys dbstruct))

		  (ods:list->ods tempdir ouf sheets))))
	  ;; (system (conc "rm -rf " tempdir))
	  (set! *didsomething* #t))))

;; Don't think I need this. Incorporated into -list-runs instead
;;
;; (if (and (args:get-arg "-since")
;; 	 (launch:setup-for-run))
;; 	 (launch:setup))
;;     (let* ((since-time (string->number (args:get-arg "-since")))
;; 	   (run-ids    (db:get-changed-run-ids since-time)))
;;       ;; (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;;       (print (sort run-ids <))
;;       (set! *didsomething* #t)))
      
      

	       (target    (args:get-arg "-target"))
	       (toppath   (assoc/default 'toppath   cmdinfo)))
	  (change-directory toppath)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (launch:setup-for-run))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (rmt:get-keys))
		 ;; db:test-get-paths must not be run remote
		 (paths    (tests:test-get-paths-matching keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)

	     (db-host   (assoc/default 'db-host   cmdinfo))
	     (run-id    (assoc/default 'run-id    cmdinfo))
	     (test-id   (assoc/default 'test-id   cmdinfo))
	     (itemdat   (assoc/default 'itemdat   cmdinfo))
	     (work-area (assoc/default 'work-area cmdinfo))
	     (db        #f))
	(change-directory testpath)
	(if (not (launch:setup-for-run))
	(if (not (launch:setup))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    (rmt:teststep-set-status! run-id test-id step state status msg logfile)
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")

	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (if (not (launch:setup-for-run))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))

	  (if (args:get-arg "-runstep")(debug:print-info 1 "Running -runstep, first change to directory " work-area))
	  (change-directory work-area)
	  ;; can setup as client for server mode now

;; Various helper commands can go below here
;;======================================================================

(if (or (args:get-arg "-showkeys")
        (args:get-arg "-show-keys"))
    (let ((db #f)
	  (keys #f))
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (rmt:get-keys)) ;;  db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (if (sqlite3:database? db)(sqlite3:finalize! db))
      (set! *didsomething* #t)))

;;======================================================================
;; Update the database schema, clean up the db
;;======================================================================

(if (args:get-arg "-rebuild-db")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close patch-db #f)
      (set! *didsomething* #t)))

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      ;; (open-run-close db:clean-up #f)
      (db:multi-db-sync 
       #f ;; do all run-ids
       ;; 'new2old
       'killservers
       'dejunk
       ;; 'adj-testids
       ;; 'old2new
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") b
	    (exit 1)))
      (open-run-close db:find-and-mark-incomplete #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

(if (args:get-arg "-update-meta")
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; now can find our db
      ;; keep this one local
      (open-run-close runs:update-all-test_meta #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Start a repl
;;======================================================================

;; fakeout readline

(if (or (args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup-for-run))
    (let* ((toppath (launch:setup))
	   (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: (args:get-arg "-local")) #f)))
      (if dbstruct
	  (begin
	    (set! *db* dbstruct)
	    (set! *client-non-blocking-mode* #t)
	    (import extras) ;; might not be needed
	    ;; (import csi)

;; Wait on a run to complete
;;======================================================================

(if (and (args:get-arg "-run-wait")
	 (not (or (args:get-arg "-run")
		  (args:get-arg "-runtests")))) ;; run-wait is built into runtests now
    (begin
      (if (not (launch:setup-for-run))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      (operate-on 'run-wait)
      (set! *didsomething* #t)))

;; ;; ;; redo me ;; Not converted to use dbstruct yet

		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

(if (not (launch:setup-for-run))
(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

;; (if (args:get-arg "-host")
;;     (begin
;;       (set! *runremote* (string-split (args:get-arg "-host" ":")))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;
;; NOT YET UTILIZED
;;
(define (runs:create-run-record)
  (let* ((mconfig      (if *configdat*
		           *configdat*
		           (if (launch:setup-for-run)
		           (if (launch:setup)
		               *configdat*
		               (begin
		                 (debug:print 0 "ERROR: Called setup in a non-megatest area, exiting")
		                 (exit 1)))))
	  (runrec      (runs:runrec-make-record))
	  (target      (common:args-get-target))
	  (runname     (common:args-get-runname))

      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with -runname runname")
      (exit 3))
     (else
      (let (;; (db   #f)
	    (keys #f))
	(if (launch:setup-for-run)
	(if (launch:setup)
	    (begin
	      (full-runconfigs-read) ;; cache the run config
	      (launch:cache-config)) ;; do not cache here - need to be sure runconfigs is processed
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(set! keys (keys:config-get-fields *configdat*))

;;
(define (server:ping run-id host:port)
  (let ((tdbdat (tasks:open-db)))
    (let* ((host-port (let ((slst (string-split   host:port ":")))
			(if (eq? (length slst) 2)
			    (list (car slst)(string->number (cadr slst)))
			    #f)))
	   (toppath       (launch:setup-for-run))
	   (toppath       (launch:setup))
	   (server-db-dat (if (not host-port)(tasks:get-server (db:delay-if-busy tdbdat) run-id) #f)))
      (if (not run-id)
	  (begin
	    (debug:print 0 "ERROR: must specify run-id when doing ping, -run-id n")
	    (print "ERROR: No run-id")
	    (exit 1))
	  (if (and (not host-port)