Megatest

      (debug:print 0 "ERROR: bad value for setenv, key=" key ", value=" val)))

(define home (getenv "HOME"))
(define user (getenv "USER"))

;; GLOBAL GLETCHES
(define *db-keys* #f)

(define *configinfo*   #f)   ;; raw results from setup, includes toppath and table from megatest.config
(define *runconfigdat* #f)   ;; run configs data
(define *configdat*    #f)   ;; megatest.config data
(define *configstatus* #f)   ;; status of data; 'fulldata : all processing done, #f : no data yet, 'partialdata : partial read done
(define *toppath*      #f)
(define *already-seen-runconfig-info* #f)

(define *waiting-queue*     (make-hash-table))
(define *test-meta-updated* (make-hash-table))
(define *globalexitstatus*  0) ;; attempt to work around possible thread issues
(define *passnum*           0) ;; when running track calls to run-tests or similar
(define *write-frequency*   (make-hash-table)) ;; run-id => (vector (current-seconds) 0))
(define *alt-log-file* #f)  ;; used by -log
(define *common:denoise*    (make-hash-table)) ;; for low noise printing

			    "%"))
	 (testpatt    (or (and (equal? args-testpatt "%")
			       rtestpatt)
			  args-testpatt)))
    (if rtestpatt (debug:print-info 0 "TESTPATT from runconfigs: " rtestpatt))
    testpatt))

(define (common:get-linktree)
  (or (getenv "MT_LINKTREE")
      (if *configdat*
	  (configf:lookup *configdat* "setup" "linktree"))))

(define (common:args-get-runname)
  (let ((res (or (args:get-arg "-runname")
		 (args:get-arg ":runname")
		 (getenv "MT_RUNNAME"))))
    ;; (if res (set-environment-variable "MT_RUNNAME" res)) ;; not sure if this is a good idea. side effect and all ...
    res))

(define (common:args-get-target #!key (split #f))
  (let* ((keys    (if *configdat* (keys:config-get-fields *configdat*) '()))
	 (numkeys (length keys))

	 (target  (or (args:get-arg "-reqtarg")

		      (args:get-arg "-target")
		      (getenv "MT_TARGET")))
	 (tlist   (if target (string-split target "/" #t) '()))
	 (valid   (if target
		      (or (null? keys) ;; probably don't know our keys yet
			  (and (not (null? tlist))
			       (eq? numkeys (length tlist))
			       (null? (filter string-null? tlist))))
		      #f)))
    (if valid
	(if split
	    tlist
	    target)
	(if target
	    (begin
	      (debug:print 0 "ERROR: Invalid target, spaces or blanks not allowed \"" target "\", target should be: " (string-intersperse keys "/") ", have " tlist " for elements")
	      #f)
	    #f))))

;;======================================================================
;; M I S C   L I S T S
;;======================================================================

				((rget)           (conc "(lambda (ht)(runconfigs-get ht \"" cmd "\"))"))
				(else "(lambda (ht)(print \"ERROR\") \"ERROR\")"))))
		;; (print "fullcmd=" fullcmd)
		(handle-exceptions
		 exn
		 (begin
		   (debug:print 0 "WARNING: failed to process config input \"" l "\"")
		   (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
		   ;; (print "exn=" (condition->list exn))
		   (set! result (conc "#{( " cmdtype ") " cmd"}")))
		 (if (or allow-system
			 (not (member cmdtype '("system" "shell"))))
		     (with-input-from-string fullcmd
		       (lambda ()
			 (set! result ((eval (read)) ht))))
		    (set! result (conc "#{(" cmdtype ") "  cmd "}"))))

	(debug:print-info 1 "read-config - file not found " path " current path: " (current-directory))
	;; WARNING: This is a risky change but really, we should not return an empty hash table if no file read?
	#f) ;; (if (not ht)(make-hash-table) ht))
      (let ((inp        (open-input-file path))
	    (res        (if (not ht)(make-hash-table) ht))
	    (metapath   (if (or (debug:debug-mode 9)
				keep-filenames)
			    path #f))
	    (calc-allow-system (lambda (allow-system section sections)
				 (if sections
				     (and (or (equal? "default" section)
					      (member section sections))
					  allow-system) ;; account for sections and return allow-system as it might be a symbol such as return-strings
				     allow-system))))
	(let loop ((inl               (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings)) ;; (read-line inp))
		   (curr-section-name (if curr-section curr-section "default"))
		   (var-flag #f);; turn on for key-var-pr and cont-ln-rx, turn off elsewhere
		   (lead     #f))
	  (debug:print-info 8 "curr-section-name: " curr-section-name " var-flag: " var-flag "\n   inl: \"" inl "\"")
	  (if (eof-object? inl) 
	      (begin
		(close-input-port inp)
		(hash-table-delete! res "") ;; we are using "" as a dumping ground and must remove it before returning the ht
		(debug:print 9 "END: " path)
		res)
	      (regex-case 
	       inl 
	       (configf:comment-rx _                  (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f))
	       (configf:blank-l-rx _                  (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f))
	       (configf:settings   ( x setting val  ) (begin
							(hash-table-set! settings setting val)
							(loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f)))
	       (configf:include-rx ( x include-file ) (let* ((curr-conf-dir (pathname-directory path))
							     (full-conf     (if (absolute-pathname? include-file)
										include-file
										(nice-path 
										 (conc (if curr-conf-dir
											   curr-conf-dir
											   ".")
										       "/" include-file)))))
							(if (file-exists? full-conf)
							    (begin
							      ;; (push-directory conf-dir)
							      (debug:print 9 "Including: " full-conf)
							      (read-config full-conf res (calc-allow-system allow-system curr-section sections) environ-patt: environ-patt curr-section: curr-section-name sections: sections settings: settings keep-filenames: keep-filenames)
							      ;; (pop-directory)
							      (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f))
							    (begin
							      (debug:print '(2 9) "INFO: include file " include-file " not found (called from " path ")")
							      (debug:print 2 "        " full-conf)
							      (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f)))))
	       (configf:section-rx ( x section-name ) (begin
							;; call post-section-procs
							(for-each 
							 (lambda (dat)
							   (let ((patt (car dat))
								 (proc (cdr dat)))
							     (if (string-match patt curr-section-name)
								 (proc curr-section-name section-name res path))))
							 post-section-procs)
							(loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings)
							      ;; if we have the sections list then force all settings into "" and delete it later?
							      (if (or (not sections) 
								      (member section-name sections))
								  section-name "") ;; stick everything into ""
							      #f #f)))
	       (configf:key-sys-pr ( x key cmd      ) (if (calc-allow-system allow-system curr-section sections)
							  (let ((alist    (hash-table-ref/default res curr-section-name '()))
								(val-proc (lambda ()
									    (let* ((start-time (current-seconds))
										   (cmdres     (process:cmd-run->list cmd))
										   (delta      (- (current-seconds) start-time))
										   (status     (cadr cmdres))
										   (res        (car  cmdres)))

										  (debug:print-info 9 "for line \"" inl "\"\n  command: " cmd " took " delta " seconds to run with output:\n   " res))
									      (if (null? res)
										  ""
										  (string-intersperse res " "))))))
							    (hash-table-set! res curr-section-name 
									     (config:assoc-safe-add alist
									   			    key 
												    (case (calc-allow-system allow-system curr-section sections)
												      ((return-procs) val-proc)
												      ((return-string) cmd)
												      (else (val-proc)))
												    metadata: metapath))
							    (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f))
							  (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f)))
	       (configf:key-val-pr ( x key unk1 val unk2 ) (let* ((alist   (hash-table-ref/default res curr-section-name '()))
								  (envar   (and environ-patt (string-search (regexp environ-patt) curr-section-name)))
								  (realval (if envar
									       (config:eval-string-in-environment val)
									       val)))
							     (debug:print-info 6 "read-config env setting, envar: " envar " realval: " realval " val: " val " key: " key " curr-section-name: " curr-section-name)
							     (if envar (safe-setenv key realval))
							     (debug:print 10 "   setting: [" curr-section-name "] " key " = " val)
							     (hash-table-set! res curr-section-name 
									      (config:assoc-safe-add alist key realval metadata: metapath))
							     (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name key #f)))
	       (configf:key-no-val ( x key val)             (let* ((alist   (hash-table-ref/default res curr-section-name '())))
							      (debug:print 10 "   setting: [" curr-section-name "] " key " = #t")
							      (hash-table-set! res curr-section-name 
									       (config:assoc-safe-add alist key #t metadata: metapath))
							      (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name key #f)))
	       ;; if a continued line
	       (configf:cont-ln-rx ( x whsp val     ) (let ((alist (hash-table-ref/default res curr-section-name '())))
						(if var-flag             ;; if set to a string then we have a continued var
						    (let ((newval (conc 
								   (config-lookup res curr-section-name var-flag) "\n"
								   ;; trim lead from the incoming whsp to support some indenting.
								   (if lead
								       (string-substitute (regexp lead) "" whsp)
								       "")
								   val)))
						      ;; (print "val: " val "\nnewval: \"" newval "\"\nvarflag: " var-flag)
						      (hash-table-set! res curr-section-name 
								       (config:assoc-safe-add alist var-flag newval metadata: metapath))
						      (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name var-flag (if lead lead whsp)))
						    (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f))))
	       (else (debug:print 0 "ERROR: problem parsing " path ",\n   \"" inl "\"")
		     (set! var-flag #f)
		     (loop (configf:read-line inp res (calc-allow-system allow-system curr-section sections) settings) curr-section-name #f #f))))))))
  
;; pathenvvar will set the named var to the path of the config
(define (find-and-read-config fname #!key (environ-patt #f)(given-toppath #f)(pathenvvar #f))
  (let* ((curr-dir   (current-directory))
         (configinfo (find-config fname toppath: given-toppath))
	 (toppath    (car configinfo))
	 (configfile (cadr configinfo))

		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

(define *useserver* (cond
		     ((args:get-arg "-use-local") #f)
		     ((configf:lookup *configdat* "dashboard" "use-server")

;;  'old2new      - sync megatest.db records to .db/{main,1,2 ...}.db
;;  'new2old      - sync .db/{main,1,2,3 ...}.db to megatest.db
;;  'closeall     - close all opened dbs
;;
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync run-ids . options)
  (let* ((toppath  (launch:setup))
	 (dbstruct (if toppath (make-dbr:dbstruct path: toppath) #f))
	 (mtdb     (if toppath (db:open-megatest-db)))
	 (allow-cleanup (if run-ids #f #t))
	 (run-ids  (if run-ids 
		       run-ids
		       (if toppath (begin
				     (db:delay-if-busy mtdb)

	      (debug:print 0 "ERROR: test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force: #t))
	      (begin
		(debug:print 0 "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)
		;; (sqlite3:finalize! tdb)
		(exit 1)))
	  (change-directory *toppath*) 

					     (tests:get-testconfig test-name tconfigreg #t force-create: #t)) ;; 'return-procs)))
					    (ezstepslst (if (hash-table? testconfig)
							    (hash-table-ref/default testconfig "ezsteps" '())
							    #f)))
				       (if testconfig
					   (hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
					   (begin



					     (launch:setup)

					     (debug:print 0 "WARNING: no testconfig found for " test-name " in search path:\n  "
							  (string-intersperse (tests:get-tests-search-path *configdat*) "\n  "))))
				       ;; after all that, still no testconfig? Time to abort
				       (if (not testconfig)
					   (begin
					     (debug:print 0 "ERROR: Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
					     (exit 1)))
				       (if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
				       ;; if ezsteps was defined then we are sure to have at least one step but check anyway
				       (if (not (> (length ezstepslst) 0))
					   (debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
					   (let loop ((ezstep (car ezstepslst))
						      (tal    (cdr ezstepslst))
						      (prevstep #f))

	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      (rmt:update-run-stats run-id (rmt:get-raw-run-stats run-id)))
	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area " 
			 work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")
	    (if (not (launch:einf-exit-status exit-info))
		(exit 4)))))))

(define (launch:cache-config)
  ;; if we have a linktree and -runtests and -target and the directory exists dump the config
  ;; to megatest-(current-seconds).cfg and symlink it to megatest.cfg
  (if (and *configdat* 
	   (or (args:get-arg "-run")
	       (args:get-arg "-runtests")
	       (args:get-arg "-execute")))
      (let* ((linktree (get-environment-variable "MT_LINKTREE"))
	     (target   (common:args-get-target))
	     (runname  (or (args:get-arg "-runname")
			   (args:get-arg ":runname")
			   (getenv "MT_RUNNAME")))
	     (fulldir  (conc linktree "/"
			     target "/"
			     runname)))
	(debug:print-info 0 "Have -runtests with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
	(if (file-exists? linktree) ;; can't proceed without linktree
	    (begin
	      (if (not (file-exists? fulldir))
		  (create-directory fulldir #t)) ;; need to protect with exception handler 
	      (if (and target
		       runname
		       (file-exists? fulldir))
		  (let ((tmpfile  (conc fulldir "/.megatest.cfg." (current-seconds)))
			(targfile (conc fulldir "/.megatest.cfg-"  megatest-version "-" megatest-fossil-hash))
			(rconfig  (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
		    (if (file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
			(begin
			  (debug:print-info 0 "Caching megatest.config in " fulldir "/.megatest.cfg")
			  (configf:write-alist *configdat* tmpfile)
			  (system (conc "ln -sf " tmpfile " " targfile))))
		    )))))))

;; set up the very basics needed for doing anything here.
;;
(define (launch:setup-old #!key (force #f))
  ;; would set values for KEYS in the environment here for better support of env-override but 
  ;; have chicken/egg scenario. need to read megatest.config then read it again. Going to 
  ;; pass on that idea for now
  ;; special case
  (if (or force (not (hash-table? *configdat*)))  ;; no need to re-open on every call
      (begin
	(set! *configinfo* (or (if (get-environment-variable "MT_CMDINFO") ;; we are inside a test - do not reprocess configs

	      (setenv "MT_RUN_AREA_HOME" *toppath*)
	      (begin
		(debug:print 0 "ERROR: failed to find the top path to your Megatest area.")
		(exit 1)))
	  )))
  *toppath*)


































;; gather available information, if legit read configs in this order:
;;
;;   if have cache;
;;      read it a return it
;;   else
;;     megatest.config     (do not cache)
;;     runconfigs.config   (cache if all vars avail)
;;     megatest.config     (cache if all vars avail)
;;   returns:
;;     *toppath*
;;   side effects:
;;     sets; *configdat*    (megatest.config info)
;;           *runconfigdat* (runconfigs.config info)
;;           *configstatus* (status of the read data)
;;
(define (launch:setup-new #!key (force #f))
  (let* ((toppath  (or *toppath* (getenv "MT_RUN_AREA_HOME"))) ;; preserve toppath
	 (runname  (common:args-get-runname))
	 (target   (common:args-get-target))
	 (linktree (common:get-linktree))

	 (mtconfig (or (args:get-arg "-config") "megatest.config")) ;; allow overriding megatest.config 
	 (rundir   (if (and runname target linktree)(conc linktree "/" target "/" runname) #f))
	 (mtcachef (and rundir (conc rundir "/" ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
	 (rccachef (and rundir (conc rundir "/" ".runconfigs.cfg-"  megatest-version "-" megatest-fossil-hash)))
	 (cancreate (and rundir (file-exists? rundir)(file-write-access? rundir))))
    ;; (print "runname: " runname " target: " target " mtcachef: " mtcachef " rccachef: " rccachef)
    ;; (if (not *toppath*)(set! *toppath* toppath)) ;; this probably is not needed?
    (cond
     ;; data was read and cached and available in *configstatus*, toppath has already been set
     ((eq? *configstatus* 'fulldata)
      *toppath*)
     ;; if mtcachef exists just read it, however we need to assume toppath is available in $MT_RUN_AREA_HOME
     ((and mtcachef (file-exists? mtcachef) (get-environment-variable "MT_RUN_AREA_HOME"))
      (set! *configdat*    (configf:read-alist mtcachef))
      (set! *runconfigdat* (configf:read-alist rccachef))
      (set! *configinfo*   (list *configdat*  (get-environment-variable "MT_RUN_AREA_HOME")))
      (set! *configstatus* 'fulldata)
      (set! *toppath*      (get-environment-variable "MT_RUN_AREA_HOME"))
      *toppath*)
     ;; we have all the info needed to fully process runconfigs and megatest.config
     (mtcachef              
      (let* ((toppath    (get-environment-variable "MT_RUN_AREA_HOME")) ;; rely on MT_RUN_AREA_HOME if we are in a test environment
	     (sections   (list "default" target)) ;; for runconfigs
	     (first-pass (find-and-read-config        ;; NB// sets MT_RUN_AREA_HOME as side effect
				  mtconfig
				  environ-patt: "env-override"
				  given-toppath: toppath
				  pathenvvar: "MT_RUN_AREA_HOME"))
	     (first-rundat  (read-config (conc toppath "/runconfigs.config") *runconfigdat* #t 
					 sections: sections)))
	(set! *runconfigdat* first-rundat)
	(if first-pass  ;; 
	    (begin
	      (set! *configdat*  (car first-pass))
	      (set! *configinfo* first-pass)
	      (set! *toppath*    (or toppath (cadr first-pass))) ;; use the gathered data unless already have it
	      (set! toppath      *toppath*)
	      (setenv "MT_RUN_AREA_HOME" *toppath*)
	      ;; the seed read is done, now read runconfigs, cache it then read megatest.config one more time and cache it
	      (let* ((keys         (rmt:get-keys))
		     (key-vals     (keys:target->keyval keys target))
		     (linktree     (or (getenv "MT_LINKTREE")
				       (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f)))
		     (second-pass  (find-and-read-config
				    mtconfig
				    environ-patt: "env-override"
				    given-toppath: toppath
				    pathenvvar: "MT_RUN_AREA_HOME"))
		     (runconfigdat (begin     ;; this read of the runconfigs will see any adjustments made by re-reading megatest.config
				     (for-each (lambda (kt)
						 (setenv (car kt) (cadr kt)))
					       key-vals)
				     (read-config (conc toppath "/runconfigs.config") *runconfigdat* #t 
						  sections: sections))))
		(if cancreate (configf:write-alist runconfigdat rccachef))
		(set! *runconfigdat* runconfigdat)
		(if cancreate (configf:write-alist *configdat* mtcachef))
		(if cancreate (set! *configstatus* 'fulldata))))
	    ;; no configs found? should not happen but let's try to recover gracefully, return an empty hash-table
	    (set! *configdat* (make-hash-table))
	    )))
     ;; else read what you can and set the flag accordingly
     (else
      (let* ((cfgdat   (find-and-read-config 
			(or (args:get-arg "-config") "megatest.config")
			environ-patt: "env-override"
			given-toppath: (get-environment-variable "MT_RUN_AREA_HOME")
			pathenvvar: "MT_RUN_AREA_HOME")))
	(if cfgdat
	    (let* ((sections (if target (list "default" target) #f))
		   (toppath  (or (get-environment-variable "MT_RUN_AREA_HOME")(cadr cfgdat)))
		   (rdat     (read-config (conc toppath
						"/runconfigs.config") *runconfigdat* #t sections: sections)))
	      (set! *configinfo*   cfgdat)
	      (set! *configdat*    (car cfgdat))
	      (set! *runconfigdat* rdat)
	      (set! *toppath*      toppath)
	      (set! *configstatus* 'partial))
	    (begin
	      (debug:print 0 "ERROR: No " mtconfig " file found. Giving up.")
	      (exit 2))))))
    ;; additional house keeping
    (let* ((linktree (or (getenv "MT_LINKTREE")
			 (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f))))
      (if linktree
	  (if (not (file-exists? linktree))
	      (begin
		(handle-exceptions
		 exn
		 (begin
		   (debug:print 0 "ERROR: Something went wrong when trying to create linktree dir at " linktree)
		   (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
		   (exit 1))
		 (create-directory linktree #t))))
	  (begin
	    (debug:print 0 "ERROR: linktree not defined in [setup] section of megatest.config")
	    ;; (exit 1)
	    )))
    (if (and *toppath*
	     (directory-exists? *toppath*))
	(setenv "MT_RUN_AREA_HOME" *toppath*)
	(begin
	  (debug:print 0 "ERROR: failed to find the top path to your Megatest area.")))
    *toppath*))

(define launch:setup launch:setup-new)

(define (get-best-disk confdat testconfig)
  (let* ((disks   (or (and testconfig (hash-table-ref/default testconfig "disks" #f))
		      (hash-table-ref/default confdat "disks" #f)))
	 (minspace (let ((m (configf:lookup confdat "setup" "minspace")))
		     (string->number (or m "10000")))))
    (if disks 

(if (args:get-arg "-env2file")
    (begin
      (save-environment-as-files (args:get-arg "-env2file"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-disks")
    (let ((toppath (launch:setup)))
      (print 
       (string-intersperse 
	(map (lambda (x)
	       (string-intersperse 
		x
		" => "))
	     (common:get-disks *configdat*))

;;   we start the server if not running else start the client thread
;;======================================================================

(if (args:get-arg "-server")

    ;; Server? Start up here.
    ;;
    (let ((tl        (launch:setup))
	  (run-id    (and (args:get-arg "-run-id")
			  (string->number (args:get-arg "-run-id")))))
      (if run-id
	  (begin
	    (server:launch run-id)
	    (set! *didsomething* #t))
	  (debug:print 0 "ERROR: server requires run-id be specified with -run-id")))

    ;; Not a server? This section will decide how to communicate
    ;;
    ;;  Setup client for all expect listed here
    (if (null? (lset-intersection 
		equal?
		(hash-table-keys args:arg-hash)
		'("-list-servers"
		  "-stop-server"
		  "-show-cmdinfo"
		  "-list-runs"
		  "-ping")))
	(if (launch:setup)
	    (let ((run-id    (and (args:get-arg "-run-id")
				  (string->number (args:get-arg "-run-id")))))
	      ;; (set! *fdb*   (filedb:open-db (conc *toppath* "/db/paths.db")))
	      ;; if not list or kill then start a client (if appropriate)
	      (if (or (args-defined? "-h" "-version" "-gen-megatest-area" "-gen-megatest-test")
		      (eq? (length (hash-table-keys args:arg-hash)) 0))
		  (debug:print-info 1 "Server connection not needed")
		  (begin
		    ;; (if run-id 
		    ;;     (client:launch run-id) 
		    ;;     (client:launch 0)      ;; without run-id we'll start a server for "0"
		    #t
		    ))))))

;; MAY STILL NEED THIS
;;		       (set! *megatest-db* (make-dbr:dbstruct path: *toppath* local: #t))))))))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (launch:setup)))
      (if tl 
	  (let* ((tdbdat  (tasks:open-db))
		 (servers (tasks:get-all-servers (db:delay-if-busy tdbdat)))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))

	(else
	 (debug:print 0 "ERROR: dump output format " (args:get-arg "-dumpmode") " not supported for -list-targets")))
      (set! *didsomething* #t)))

;; cache the runconfigs in $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME/.runconfig
;;
(define (full-runconfigs-read)
;; in the envprocessing branch the below code replaces the further below code
;;  (if (eq? *configstatus* 'fulldata)
;;      *runconfigdat*
;;      (begin
;;	(launch:setup)
;;	*runconfigdat*)))

  (let* ((rundir (if (and (getenv "MT_LINKTREE")(getenv "MT_TARGET")(getenv "MT_RUNNAME"))
		     (conc (getenv "MT_LINKTREE") "/" (getenv "MT_TARGET") "/" (getenv "MT_RUNNAME"))
		     #f))
	 (cfgf   (if rundir (conc rundir "/.runconfig." megatest-version "-" megatest-fossil-hash) #f)))
    (if (and cfgf
	     (file-exists? cfgf)
	     (file-write-access? cfgf))

		(configf:write-alist data cfgf)
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup-for-run force: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))

(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))
	;; keep this one local
	(cond
	 ((and (args:get-arg "-section")
	       (args:get-arg "-var"))
	  (let ((val (or (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))

	  (configf:config->ini data))
	 (else
	  (debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	(set! *didsomething* #t))
      (pop-directory)))

(if (args:get-arg "-show-config")
    (let ((tl   (launch:setup))
	  (data *configdat*)) ;; (read-config "megatest.config" #f #t)))
      (push-directory *toppath*)
      ;; keep this one local
      (cond 
       ((and (args:get-arg "-section")
	     (args:get-arg "-var"))
	(let ((val (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))))

;; NOTE: list-runs and list-db-targets operate on local db!!!
;;
;; IDEA: megatest list -runname blah% ...
;;
(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (launch:setup)
	(let* (;; (dbstruct    (make-dbr:dbstruct path: *toppath* local: (args:get-arg "-local")))
	       (runpatt     (args:get-arg "-list-runs"))
	       (testpatt    (common:args-get-testpatt #f))
	       ;; (if (args:get-arg "-testpatt") 
	       ;;  	        (args:get-arg "-testpatt") 
	       ;;  	        "%"))
	       (keys        (rmt:get-keys)) ;; (db:get-keys dbstruct))

		  (ods:list->ods tempdir ouf sheets))))
	  ;; (system (conc "rm -rf " tempdir))
	  (set! *didsomething* #t))))

;; Don't think I need this. Incorporated into -list-runs instead
;;
;; (if (and (args:get-arg "-since")
;; 	 (launch:setup))
;;     (let* ((since-time (string->number (args:get-arg "-since")))
;; 	   (run-ids    (db:get-changed-run-ids since-time)))
;;       ;; (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;;       (print (sort run-ids <))
;;       (set! *didsomething* #t)))
      
      

	       (target    (args:get-arg "-target"))
	       (toppath   (assoc/default 'toppath   cmdinfo)))
	  (change-directory toppath)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (rmt:get-keys))
		 ;; db:test-get-paths must not be run remote
		 (paths    (tests:test-get-paths-matching keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)

	     (db-host   (assoc/default 'db-host   cmdinfo))
	     (run-id    (assoc/default 'run-id    cmdinfo))
	     (test-id   (assoc/default 'test-id   cmdinfo))
	     (itemdat   (assoc/default 'itemdat   cmdinfo))
	     (work-area (assoc/default 'work-area cmdinfo))
	     (db        #f))
	(change-directory testpath)
	(if (not (launch:setup))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    (rmt:teststep-set-status! run-id test-id step state status msg logfile)
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")

	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))

	  (if (args:get-arg "-runstep")(debug:print-info 1 "Running -runstep, first change to directory " work-area))
	  (change-directory work-area)
	  ;; can setup as client for server mode now

;; Various helper commands can go below here
;;======================================================================

(if (or (args:get-arg "-showkeys")
        (args:get-arg "-show-keys"))
    (let ((db #f)
	  (keys #f))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (rmt:get-keys)) ;;  db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (if (sqlite3:database? db)(sqlite3:finalize! db))
      (set! *didsomething* #t)))

;;======================================================================
;; Update the database schema, clean up the db
;;======================================================================

(if (args:get-arg "-rebuild-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close patch-db #f)
      (set! *didsomething* #t)))

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      ;; (open-run-close db:clean-up #f)
      (db:multi-db-sync 
       #f ;; do all run-ids
       ;; 'new2old
       'killservers
       'dejunk
       ;; 'adj-testids
       ;; 'old2new
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") b
	    (exit 1)))
      (open-run-close db:find-and-mark-incomplete #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

(if (args:get-arg "-update-meta")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; now can find our db
      ;; keep this one local
      (open-run-close runs:update-all-test_meta #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Start a repl
;;======================================================================

;; fakeout readline

(if (or (args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup))
	   (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: (args:get-arg "-local")) #f)))
      (if dbstruct
	  (begin
	    (set! *db* dbstruct)
	    (set! *client-non-blocking-mode* #t)
	    (import extras) ;; might not be needed
	    ;; (import csi)

;; Wait on a run to complete
;;======================================================================

(if (and (args:get-arg "-run-wait")
	 (not (or (args:get-arg "-run")
		  (args:get-arg "-runtests")))) ;; run-wait is built into runtests now
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      (operate-on 'run-wait)
      (set! *didsomething* #t)))

;; ;; ;; redo me ;; Not converted to use dbstruct yet

		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

;; (if (args:get-arg "-host")
;;     (begin
;;       (set! *runremote* (string-split (args:get-arg "-host" ":")))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;
;; NOT YET UTILIZED
;;
(define (runs:create-run-record)
  (let* ((mconfig      (if *configdat*
		           *configdat*
		           (if (launch:setup)
		               *configdat*
		               (begin
		                 (debug:print 0 "ERROR: Called setup in a non-megatest area, exiting")
		                 (exit 1)))))
	  (runrec      (runs:runrec-make-record))
	  (target      (common:args-get-target))
	  (runname     (common:args-get-runname))

      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with -runname runname")
      (exit 3))
     (else
      (let (;; (db   #f)
	    (keys #f))
	(if (launch:setup)
	    (begin
	      (full-runconfigs-read) ;; cache the run config
	      (launch:cache-config)) ;; do not cache here - need to be sure runconfigs is processed
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(set! keys (keys:config-get-fields *configdat*))

;;
(define (server:ping run-id host:port)
  (let ((tdbdat (tasks:open-db)))
    (let* ((host-port (let ((slst (string-split   host:port ":")))
			(if (eq? (length slst) 2)
			    (list (car slst)(string->number (cadr slst)))
			    #f)))
	   (toppath       (launch:setup))
	   (server-db-dat (if (not host-port)(tasks:get-server (db:delay-if-busy tdbdat) run-id) #f)))
      (if (not run-id)
	  (begin
	    (debug:print 0 "ERROR: must specify run-id when doing ping, -run-id n")
	    (print "ERROR: No run-id")
	    (exit 1))
	  (if (and (not host-port)