Megatest

    ;; TESTS
    test-set-state-status-by-id
    delete-test-records
    delete-old-deleted-test-records
    test-set-status-state
    test-set-top-process-pid
    roll-up-pass-fail-counts
    update-pass-fail-counts
    top-test-set-per-pf-counts ;; (db:top-test-set-per-pf-counts (db:get-db *db* 5) 5 "runfirst")

    ;; RUNS
    register-run
    set-tests-state-status
    delete-run
    lock/unlock-run
    update-run-event_time

	    ((test-set-state-status-by-id)     (apply db:test-set-state-status-by-id dbstruct params))
	    ((delete-test-records)             (apply db:delete-test-records dbstruct params))
	    ((delete-old-deleted-test-records) (apply db:delete-old-deleted-test-records dbstruct params))
	    ((test-set-status-state)           (apply db:test-set-status-state dbstruct params))
	    ((test-set-top-process-pid)        (apply db:test-set-top-process-pid dbstruct params))
	    ((roll-up-pass-fail-counts)        (apply db:roll-up-pass-fail-counts dbstruct params))
	    ((update-pass-fail-counts)         (apply db:general-call dbstruct 'update-pass-fail-counts params))
	    ((top-test-set-per-pf-counts)      (apply db:top-test-set-per-pf-counts dbstruct params))
	    ((test-set-archive-block-id)       (apply db:test-set-archive-block-id dbstruct params))

	    ;; RUNS
	    ((register-run)                 (apply db:register-run dbstruct params))
	    ((set-tests-state-status)       (apply db:set-tests-state-status dbstruct params))
	    ((delete-run)                   (apply db:delete-run dbstruct params))
	    ((lock/unlock-run)              (apply db:lock/unlock-run dbstruct params))

    ;; Now do rollups for the toplevel tests
    ;;
    (db:delay-if-busy dbdat)
    (for-each
     (lambda (toptest)
       (let ((test-name (list-ref toptest 3)))
;;	     (run-id    (list-ref toptest 5)))
	 (db:top-test-set-per-pf-counts dbstruct run-id test-name)))
     toplevels)))

(define (db:top-test-set-per-pf-counts dbstruct run-id test-name)
  (db:general-call (db:get-db dbstruct run-id) 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name))) 
 
		     
;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:

;; call with state = #f to roll up with out accounting for state/status of this item
;;
(define (db:roll-up-pass-fail-counts dbstruct run-id test-name item-path state status)
  (if (not (equal? item-path ""))
      (let ((dbdat (db:get-db dbstruct run-id)))
	;;	(db    (db:dbdat-get-db dbdat)))
	(db:general-call dbdat 'update-pass-fail-counts (list test-name test-name test-name))
	(db:top-test-set-per-pf-counts dbstruct run-id test-name))))
  
;;     (case (string->symbol status)
;;       ((RUNNING)  (db:general-call dbdat 'top-test-set-running (list test-name)))
;;       ((LAUNCHED) (db:general-call dbdat 'top-test-set (list "LAUNCHED" test-name)))
;;       ((ABORT INCOMPLETE) (db:general-call dbdat 'top-test-set (list status test-name))))
    
;;     (if (or (not state)

	;;
	'(top-test-set-per-pf-counts "UPDATE tests
                       SET state=CASE 
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE testname=?
                                                     AND item_path != '' 
                                                     AND status IN ('INCOMPLETE')
                                                     AND state in ('RUNNING','NOT_STARTED','LAUNCHED','REMOTEHOSTSTART')) > 0 THEN 'RUNNING'
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE testname=?
                                                     AND item_path != '' 
                                                     AND status NOT IN ('TEN_STRIKES','BLOCKED')
                                                     AND state in ('RUNNING','NOT_STARTED','LAUNCHED','REMOTEHOSTSTART')) > 0 THEN 'RUNNING'
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE testname=?

                                         WHERE testname=?
                                              AND item_path != ''
                                              AND state IN ('BLOCKED','INCOMPLETE')) > 0 THEN 'FAIL'
                                  WHEN (SELECT count(id) FROM tests
                                         WHERE testname=?
                                              AND item_path != ''
                                              AND state NOT IN ('DELETED')
                                              AND status IN ('INCOMPLETE','ABORT')) > 0 THEN 'ABORT'
                                  WHEN (SELECT count(id) FROM tests
                                         WHERE testname=?
                                              AND item_path != ''
                                              AND state NOT IN ('DELETED')
                                              AND status = 'AUTO') > 0 THEN 'AUTO'
                                  WHEN (SELECT count(id) FROM tests
                                         WHERE testname=?

launcher bsub
# if defined and not "no" flexi-launcher will bypass launcher unless there is no
# match.
flexi-launcher yes
------------------------

Tricks

======

This section is a compendium of a various useful tricks for debugging,
configuring and generally getting the most out of Megatest.

Limiting your running jobs
--------------------------

# if defined and not "no" flexi-launcher will bypass launcher unless there is no
# match.
flexi-launcher yes</pre>
</div></div>
</div>
</div>
</div>

<h1 id="_tricks">Tricks</h1>

<div class="paragraph"><p>This section is a compendium of a various useful tricks for debugging,
configuring and generally getting the most out of Megatest.</p></div>


<div class="sect1">
<h2 id="_limiting_your_running_jobs">Limiting your running jobs</h2>
<div class="sectionbody">
<div class="paragraph"><p>The following example will limit a test in the jobgroup "group1" to no more than 10 tests simultaneously.</p></div>
<div class="paragraph"><p>In your testconfig:</p></div>
<div class="listingblock">
<div class="content monospaced">

</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br>
Last updated
 2015-07-12 21:50:37 MST
</div>
</div>
</body>
</html>

		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      ;; (if (and (not (equal? item-path ""))
	      ;;      (< (random (rmt:get-count-tests-running-for-testname run-id test-name)) 5))
	      (tests:summarize-items run-id test-id test-name #f)
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      )
	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area " 
			 work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
	    (if (not (vector-ref exit-info 1))
		(exit 4)))))))

;; set up the very basics needed for doing anything here.

;;
(define (rmt:roll-up-pass-fail-counts run-id test-name item-path state status)
  (rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path state status)))

(define (rmt:update-pass-fail-counts run-id test-name)
  (rmt:general-call 'update-pass-fail-counts run-id (list run-id test-name run-id test-name run-id test-name)))

(define (rmt:top-test-set-per-pf-counts run-id test-name)
  (rmt:general-call 'top-test-set-per-pf-counts run-id (list run-id test-name)))

;;======================================================================
;;  R U N S
;;======================================================================

(define (rmt:get-run-info run-id)
  (rmt:send-receive 'get-run-info run-id (list run-id)))

	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(let ((script (configf:lookup *configdat* "testrollup" test-name)))
		  (print "Obtained lock for " outputfilename)
		  ;; (rmt:top-test-set-per-pf-counts run-id test-name)
		  (rmt:roll-up-pass-fail-counts run-id test-name "" #f #f)
		  (rmt:top-test-set-per-pf-counts run-id test-name)
		  (if script
		      (system (conc script " > " outputfilename " & "))
		      (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename))
		  (common:simple-file-release-lock lockf)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename))

[jobtools]
flexi-launcher yes

[host-types]
general nbfake
remote  bsub
# remote  nbfake

[launchers]
runfirst/sum% remote
% general