Megatest

            (if (common:file-exists? fname)   ;; now verify it is readable
                (if (configf:read-alist fname)
                    #t ;; data is good.
                    (begin
                      (handle-exceptions
                       exn
                       #f
                       (debug:print 0 *default-log-port* "WARNING: content " dat " for cache " fname " is not readable. Deleting generated file.")
                       (delete-file fname))
                      #f))
                #f))))
    (common:faux-unlock fname)
    res))
  
;; convert hierarchial list to ini format

	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes)
                        (or new-cpu-load cpu-load)
                        (or new-disk-free disk-free)
                        (if do-sync (current-seconds) last-sync)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f))) ;; NOTE: Checking twice for keep-going is intentional























(define (launch:execute encoded-cmd)
  (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	 (tconfigreg #f))
    (setenv "MT_CMDINFO" encoded-cmd)
    ;;(bb-check-path msg: "launch:execute incoming")
    (if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
	;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))  ;; testpath is the test spec area
	       (top-path  (assoc/default 'toppath   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))  ;; work-area is the test run area
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (ezsteps   (assoc/default 'ezsteps   cmdinfo))
	       ;; (runremote (assoc/default 'runremote cmdinfo))
	       ;; (transport (assoc/default 'transport cmdinfo))  ;; not used
	       ;; (serverinf (assoc/default 'serverinf cmdinfo))
	       ;; (port      (assoc/default 'port      cmdinfo))

	       (runname   (assoc/default 'runname   cmdinfo))
	       (megatest  (assoc/default 'megatest  cmdinfo))
	       (runtlim   (assoc/default 'runtlim   cmdinfo))
	       (contour   (assoc/default 'contour   cmdinfo))
	       (item-path (item-list->path itemdat))
	       (mt-bindir-path (assoc/default 'mt-bindir-path cmdinfo))
	       (keys      #f)
	       (keyvals   #f)
	       (fullrunscript (if (not runscript)
                                  #f
                                  (if (substring-index "/" runscript)
                                      runscript ;; use unadultered if contains slashes
                                      (let ((fulln (conc testpath "/" runscript)))
	                                  (if (and (common:file-exists? fulln)
                                                   (file-execute-access? fulln))
                                              fulln
                                              runscript))))) ;; assume it is on the path
	       ) ;; (rollup-status 0)

	  (if contour (setenv "MT_CONTOUR" contour))
	  
	  ;; immediated set some key variables from CMDINFO data, yes, these will be set again below ...
	  ;;
	  (setenv "MT_TESTSUITENAME" areaname)
	  (setenv "MT_RUN_AREA_HOME" top-path)
	  (set! *toppath* top-path)
	  (setenv "MT_TEST_RUN_DIR"  work-area)

	;;    ;; On NFS it can be slow and unreliable to get needed startup information.
	;;    ;;  i. Check if we are on the homehost, if so, proceed
	;;    ;; ii. Check if host and port passed in via CMDINFO are valid and if
	;;    ;;     possible use them.
	;;    (let ((bestadrs (server:get-best-guess-address (get-host-name)))
	;;    	(needcare #f))
	;;      (if (equal? homehost bestadrs) ;; we are likely on the homehost
	;;    	(debug:print-info 0 *default-log-port* "test " test-name " appears to be running on the homehost " homehost)
	;;    	(let ((host-port (if serverurl (string-split serverurl ":") #f)))
	;;    	  (if (not *runremote*)(set! *runremote* (make-remote))) ;; init *runremote*
	;;    	  (if (string? homehost)
	;;    	      (if (and host-port
	;;    		       (> (length host-port) 1))
	;;    		  (let* ((host      (car host-port))
        ;;                           (port      (cadr host-port))
        ;;                           (start-res (http-transport:client-connect host port))
        ;;                           (ping-res  (rmt:login-no-auto-client-setup start-res)))
	;;    		    (if (and start-res
	;;    			     ping-res)
	;;    			;; (begin ;; let ((url  (http-transport:server-dat-make-url start-res)))
	;;    			(begin
	;;    			  (remote-conndat-set! *runremote* start-res)
	;;    			  ;; (remote-server-url-set! *runremote* url)
	;;    			  ;; (if (server:ping url)
	;;    			  (debug:print-info 0 *default-log-port* "connected to " host ":" port " using CMDINFO data."))
	;;    			(begin
	;;    			  (debug:print-info 0 *default-log-port* "have CMDINFO data but failed to connect to " host ":" port)
	;;    			  (set! *runremote* #f))
	;;    			  ;; (remote-conndat-set! *runremote* #f))
	;;    			))
	;;    		  (begin
	;;    		    (set! *runremote* #f)
	;;    		    (debug:print-info 0 *default-log-port* (if host-port
	;;    							       (conc "received invalid host-port information " host-port)
	;;    							       "no host-port information received"))
	;;    		    ;; potential for bad situation if simultaneous starting of hundreds of jobs on servers, set needcare.
	;;    		    (set! needcare #t)))
	;;    	      (begin
	;;    		(set! *runremote* #f)
	;;    		(debug:print-info 0 *default-log-port* "received no homehost information. Please report this to support as it should not happen.")
	;;    		(set! needcare #t)))))
	;;      (if needcare  ;; due to very slow NFS we will do a brute force mkdir to ensure that the directory inode it truly available on this host
	;;    	(let ((logdir (conc top-path "/logs"))) ;; we'll try to create this directory
	;;    	  (handle-exceptions
	;;    	      exn
	;;    	      (debug:print 0 *default-log-port* "Failed to create directory " logdir " expect problems, message: " ((condition-property-accessor 'exn 'message) exn))
	;;    	    (create-directory logdir #t)))))
	;;    	  
	  ;; NFS might not have propagated the directory meta data to the run host - give it time if needed
	  (let loop ((count 0))
	    (if (or (common:file-exists? top-path)
		    (> count 10))
		(change-directory top-path)
		(begin
		  (debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " top-path " not found")
		  (thread-sleep! 10)
		  (loop (+ count 1)))))
	  (launch:setup) ;; should be properly in the top-path now
	  (set! tconfigreg (tests:get-all))
	  (let ((sighand (lambda (signum)
			   ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
			   (if (eq? signum signal/stop)
			       (debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
			   (set! *time-to-exit* #t)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (let ((th1 (make-thread (lambda ()
						     (rmt:test-set-state-status run-id test-id "INCOMPLETE" "KILLED" #f)
						     (print "Killed by signal " signum ". Exiting")
						     (thread-sleep! 1)
						     (exit 1))))
				 (th2 (make-thread (lambda ()
						     (thread-sleep! 2)
						     (debug:print 0 *default-log-port* "Done")
						     (exit 4)))))
			     (thread-start! th2)
			     (thread-start! th1)
			     (thread-join! th2)))))
	    (set-signal-handler! signal/int sighand)
	    (set-signal-handler! signal/term sighand)
	    ) ;; (set-signal-handler! signal/stop sighand)
	  
	  ;; Do not run the test if it is REMOVING, RUNNING, KILLREQ or REMOTEHOSTSTART,
	  ;; Mark the test as REMOTEHOSTSTART *IMMEDIATELY*
	  ;;
	  (let* ((test-info (rmt:get-test-info-by-id run-id test-id))
		 (test-host (if test-info
				(db:test-get-host        test-info)
				(begin
				  (debug:print 0 *default-log-port* "ERROR: failed to find a record for test-id " test-id ", exiting.")
				  (exit))))
		 (test-pid  (db:test-get-process_id  test-info)))







	    (cond
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "KILLREQ" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      ) ;; prime it for running
	     ((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))

;; 
;;  <linkdir> - <target> - <testname> [ - <itempath> ]
;; 
;; All log file links should be stored relative to the top of link path
;;  
;; <target> - <testname> [ - <itempath> ] 
;;
(define (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat #!key (remtries 2))

  (let* ((item-path (if (string? itemdat) itemdat (item-list->path itemdat))) ;; if pass in string - just use it
	 (runname   (if (string? run-info) ;; if we pass in a string as run-info use it as run-name.
			run-info
			(db:get-value-by-header (db:get-rows run-info)
						(db:get-header run-info)
						"runname")))
	 (contour   #f) ;; NOT READY FOR THIS (args:get-arg "-contour"))
	 ;; convert back to db: from rdb: - this is always run at server end
	 (target   (string-intersperse (map cadr keyvals) "/"))

	 (not-iterated  (equal? "" item-path))

	 ;; all tests are found at <rundir>/test-base or <linkdir>/test-base
	 (testtop-base (conc target "/" runname "/" testname))
	 (test-base    (conc testtop-base (if not-iterated "" "/") item-path))

	    (if (not (eq? status 0))
		(debug:print 2 *default-log-port* "ERROR: problem with running \"" cmd "\"")))
	  (list lnkpathf lnkpath ))
	(if (and test-src-path (> remtries 0))
	    (begin
	      (debug:print-error 0 *default-log-port* "Failed to create work area at " test-path " with link at " lnktarget ", remaining attempts " remtries)
	      ;; 
	      (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat remtries: (- remtries 1)))
	    (list #f #f)))))

;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
  (let* ( ;; (lock-key        (conc "test-" test-id))
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)
	;; 			    (begin
	;; 			      (debug:print-info 0 *default-log-port* "Timed out waiting for a lock to launch test " keyvals " " runname " " test-name " " test-path)
	;; 			      (rmt:no-sync-del! lock-key) ;; destroy the lock
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time)) ;; 
	;; 			    (begin
	;; 			      (thread-sleep! 1)
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time))))))
	 (item-path       (item-list->path itemdat))
	 (contour         #f)) ;; NOT READY FOR THIS (args:get-arg "-contour")))
    (let loop ((delta        (- (current-seconds) *last-launch*))
	       (launch-delay (configf:lookup-number *configdat* "setup" "launch-delay" default: 1)))
      (if (> launch-delay delta)
	  (begin
	    (if (common:low-noise-print 1200 "test launch delay") ;; every two hours or so remind the user about launch delay.
		(debug:print-info 0 *default-log-port* "NOTE: test launches are delayed by " launch-delay " seconds. See megatest.config launch-delay setting to adjust.")) ;; launch of " test-name " for " (- launch-delay delta) " seconds"))

			      (conc (if dir (conc dir "/") "")
				    (case (string->symbol exe)
				      ((dboard)    "../megatest")
				      ((mtest)     "../megatest")
				      ((dashboard) "megatest")
				      (else exe)))))
	   (launcher        (common:get-launcher *configdat* test-name item-path)) ;; (config-lookup *configdat* "jobtools"     "launcher"))
	   (test-sig        (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
	   (work-area       #f)
	   (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	   (diskpath   #f)
	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))
	   (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
				(if (args:get-arg "-logging")(list "-logging") '()))))

      
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (if diskpath
	  (let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
	    (debug:print-info 2 *default-log-port* "Using work area " work-area))
	  (begin
	    (set! work-area (conc test-path "/tmp_run"))
	    (create-directory work-area #t)
	    (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run")))
      (set! cmdparms (base64:base64-encode 
		      (z3:encode-buffer 
		       (with-output-to-string
			 (lambda () ;; (list 'hosts     hosts)
			   (write (list (list 'testpath  test-path)
					;; (list 'transport (conc *transport-type*))
					;; (list 'serverinf *server-info*)
					(list 'homehost  (let* ((hhdat (common:get-homehost)))
							   (if hhdat
							       (car hhdat)
							       #f)))
					(list 'serverurl (if *runremote*
							     (remote-server-url *runremote*)
							     #f)) ;;
					(list 'areaname  (common:get-testsuite-name))
					(list 'toppath   *toppath*)
					(list 'work-area work-area)
					(list 'test-name test-name) 
					(list 'runscript runscript) 
					(list 'run-id    run-id   )
					(list 'test-id   test-id  )
					;; (list 'item-path item-path )
					(list 'itemdat   itemdat  )
					(list 'megatest  remote-megatest)
					(list 'ezsteps   ezsteps) 
					(list 'target    mt_target)
					(list 'contour   contour)

					(list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
					(list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
					(list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
					(list 'runname   runname)
					(list 'mt-bindir-path mt-bindir-path))))))))
      
      ;; clean out step records from previous run if they exist
      ;; (rmt:delete-test-step-records run-id test-id)
      ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway

      (if (common:file-exists? work-area)
	  (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir

      (cond
       ;; ((and launcher hosts) ;; must be using ssh hostname
       ;;    (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
       (launcher
	(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
       (else
	(if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
	(set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
      ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
      (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
      (debug:print 1 *default-log-port* "Launching " work-area)
      ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
      (debug:print 4 *default-log-port* "fullcmd: " fullcmd)
      (set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible.
      (let* ((commonprevvals (alist->env-vars
			      (hash-table-ref/default *configdat* "env-override" '())))
	     (miscprevvals   (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
			      (append (list (list "MT_TEST_RUN_DIR" work-area)
					    (list "MT_TEST_NAME" test-name)
					    (list "MT_ITEM_INFO" (conc itemdat)) 
					    (list "MT_RUNNAME"   runname)
					    (list "MT_TARGET"    mt_target)
					    (list "MT_ITEMPATH"  item-path)
					    )
				      itemdat)))
	     (testprevvals   (alist->env-vars
			      (hash-table-ref/default tconfig "pre-launch-env-overrides" '())))

;; Get test paths matching target, runname, and testpatt
(if (or (args:get-arg "-test-files")(args:get-arg "-test-paths"))
    ;; if we are in a test use the MT_CMDINFO data
    (if (getenv "MT_CMDINFO")
	(let* ((startingdir (current-directory))
	       (cmdinfo   (common:read-encoded-string (getenv "MT_CMDINFO")))
	       (transport (assoc/default 'transport cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status"))

(define (megatest:step step state status logfile msg)
  (if (not (getenv "MT_CMDINFO"))
      (begin
	(debug:print-error 0 *default-log-port* "MT_CMDINFO env var not set, -step must be called *inside* a megatest invoked environment!")
	(exit 5))
      (let* ((cmdinfo   (common:read-encoded-string (getenv "MT_CMDINFO")))
	     (transport (assoc/default 'transport cmdinfo))
	     (testpath  (assoc/default 'testpath  cmdinfo))
	     (test-name (assoc/default 'test-name cmdinfo))
	     (runscript (assoc/default 'runscript cmdinfo))
	     (db-host   (assoc/default 'db-host   cmdinfo))
	     (run-id    (assoc/default 'run-id    cmdinfo))
	     (test-id   (assoc/default 'test-id   cmdinfo))
	     (itemdat   (assoc/default 'itemdat   cmdinfo))
	     (work-area (assoc/default 'work-area cmdinfo))
	     (db        #f))
	(change-directory testpath)
	(if (not (launch:setup))
	    (begin
	      (debug:print 0 *default-log-port* "Failed to setup, exiting")
	      (exit 1)))


	(if (and state status)
	    (let ((comment (launch:load-logpro-dat run-id test-id step)))
	      ;; (rmt:test-set-log! run-id test-id (conc stepname ".html"))))
	      (rmt:teststep-set-status! run-id test-id step state status (or comment msg) logfile))
	    (begin
	      (debug:print-error 0 *default-log-port* "You must specify :state and :status with every call to -step")
	      (exit 6))))))

    (if (not (getenv "MT_CMDINFO"))
	(begin
	  (debug:print-error 0 *default-log-port* "MT_CMDINFO env var not set, commands -test-status, -runstep and -setlog must be called *inside* a megatest environment!")
	  (exit 5))
	(let* ((startingdir (current-directory))
	       (cmdinfo   (common:read-encoded-string (getenv "MT_CMDINFO")))
	       (transport (assoc/default 'transport cmdinfo))
	       (testpath  (assoc/default 'testpath  cmdinfo))
	       (test-name (assoc/default 'test-name cmdinfo))
	       (runscript (assoc/default 'runscript cmdinfo))
	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status"))
	       (stepname  (args:get-arg "-step")))


	  (if (not (launch:setup))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting")
		(exit 1)))

	  (if (args:get-arg "-runstep")(debug:print-info 1 *default-log-port* "Running -runstep, first change to directory " work-area))
	  (change-directory work-area)
	  ;; can setup as client for server mode now
	  ;; (client:setup)

	  (if (args:get-arg "-load-test-data")
	      ;; has sub commands that are rdb: