Megatest

      (debug:print 0 "ERROR: bad value for setenv, key=" key ", value=" val)))

(define home (getenv "HOME"))
(define user (getenv "USER"))

;; GLOBAL GLETCHES
(define *db-keys* #f)

(define *configinfo*   #f)   ;; raw results from setup, includes toppath and table from megatest.config
(define *runconfigdat* #f)   ;; run configs data
(define *configdat*    #f)   ;; megatest.config data
(define *configstatus* #f)   ;; status of data; 'fulldata : all processing done, #f : no data yet, 'partialdata : partial read done
(define *toppath*      #f)
(define *already-seen-runconfig-info* #f)

(define *waiting-queue*     (make-hash-table))
(define *test-meta-updated* (make-hash-table))
(define *globalexitstatus*  0) ;; attempt to work around possible thread issues
(define *passnum*           0) ;; when running track calls to run-tests or similar
(define *write-frequency*   (make-hash-table)) ;; run-id => (vector (current-seconds) 0))
(define *alt-log-file* #f)  ;; used by -log
(define *common:denoise*    (make-hash-table)) ;; for low noise printing

			    "%"))
	 (testpatt    (or (and (equal? args-testpatt "%")
			       rtestpatt)
			  args-testpatt)))
    (if rtestpatt (debug:print-info 0 "TESTPATT from runconfigs: " rtestpatt))
    testpatt))

(define (common:get-linktree)
  (or (getenv "MT_LINKTREE")
      (if *configdat*
	  (configf:lookup *configdat* "setup" "linktree"))))

(define (common:args-get-runname)
  (let ((res (or (args:get-arg "-runname")
		 (args:get-arg ":runname")
		 (getenv "MT_RUNNAME"))))
    ;; (if res (set-environment-variable "MT_RUNNAME" res)) ;; not sure if this is a good idea. side effect and all ...
    res))

(define (common:args-get-target #!key (split #f))
  (let* ((keys    (if *configdat* (keys:config-get-fields *configdat*) '()))
	 (numkeys (length keys))
	 (target  (if (args:get-arg "-reqtarg")
		      (args:get-arg "-reqtarg")
		      (if (args:get-arg "-target")
			  (args:get-arg "-target")
			  (getenv "MT_TARGET"))))
	 (tlist   (if target (string-split target "/" #t) '()))

		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

(define *useserver* (cond
		     ((args:get-arg "-use-local") #f)
		     ((configf:lookup *configdat* "dashboard" "use-server")

;;  'old2new      - sync megatest.db records to .db/{main,1,2 ...}.db
;;  'new2old      - sync .db/{main,1,2,3 ...}.db to megatest.db
;;  'closeall     - close all opened dbs
;;
;;  run-ids: '(1 2 3 ...) or #f (for all)
;;
(define (db:multi-db-sync run-ids . options)
  (let* ((toppath  (launch:setup))
	 (dbstruct (if toppath (make-dbr:dbstruct path: toppath) #f))
	 (mtdb     (if toppath (db:open-megatest-db)))
	 (allow-cleanup (if run-ids #f #t))
	 (run-ids  (if run-ids 
		       run-ids
		       (if toppath (begin
				     (db:delay-if-busy mtdb)

	      (debug:print 0 "ERROR: test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force: #t))
	      (begin
		(debug:print 0 "Failed to setup, exiting") 
		;; (sqlite3:finalize! db)
		;; (sqlite3:finalize! tdb)
		(exit 1)))
	  (change-directory *toppath*) 

					    (ezstepslst (if (hash-table? testconfig)
							    (hash-table-ref/default testconfig "ezsteps" '())
							    #f)))
				       (if testconfig
					   (hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
					   (begin
					     ;; got here but there are race condiitions - re-do all setup and try one more time
					     (if (launch:setup)
						 (begin
						   (launch:cache-config)
						   (set! testconfig (full-runconfigs-read))) ;; redunantly redundant, but does it resolve the race?
					     (debug:print 0 "WARNING: no testconfig found for " test-name " in search path:\n  "
							  (string-intersperse (tests:get-tests-search-path *configdat*) "\n  ")))))
				       ;; after all that, still no testconfig? Time to abort
				       (if (not testconfig)
					   (begin
					     (debug:print 0 "ERROR: Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
					     (exit 1)))
				       (if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
				       ;; if ezsteps was defined then we are sure to have at least one step but check anyway
				       (if (not (> (length ezstepslst) 0))
					   (debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
					   (let loop ((ezstep (car ezstepslst))
						      (tal    (cdr ezstepslst))
						      (prevstep #f))

	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area " 
			 work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")
	    (if (not (launch:einf-exit-status exit-info))
		(exit 4)))))))

;; set up the very basics needed for doing anything here.
(define (launch:setup #!key (force #f))
  ;; would set values for KEYS in the environment here for better support of env-override but 
  ;; have chicken/egg scenario. need to read megatest.config then read it again. Going to 
  ;; pass on that idea for now
  ;; special case
  (if (or force (not (hash-table? *configdat*)))  ;; no need to re-open on every call
      (begin
	(set! *configinfo* (or (if (get-environment-variable "MT_CMDINFO") ;; we are inside a test - do not reprocess configs

;;   if have cache;
;;      read it a return it
;;   else
;;     megatest.config     (do not cache)
;;     runconfigs.config   (cache if all vars avail)
;;     megatest.config     (cache if all vars avail)
;;
(define (launch:setup-new #!key (force #f))
  (let* ((runname  (common:args-get-runname))
	 (target   (common:args-get-target))
	 (linktree (or (getenv "MT_LINKTREE")
		       (if *configdat* (configf:lookup *configdat* "setup" "linktree") #f)))
	 (rundir   (if (and runname target linktree)(conc linktree "/" target "/" runname) #f))
	 (mtcachef (and rundir (conc rundir "/" ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
	 (rccachef (and rundir (conc rundir "/" ".runconfigs.cfg-"  megatest-version "-" megatest-fossil-hash))))

(if (args:get-arg "-env2file")
    (begin
      (save-environment-as-files (args:get-arg "-env2file"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-disks")
    (let ((toppath (launch:setup)))
      (print 
       (string-intersperse 
	(map (lambda (x)
	       (string-intersperse 
		x
		" => "))
	     (common:get-disks *configdat*))

;;   we start the server if not running else start the client thread
;;======================================================================

(if (args:get-arg "-server")

    ;; Server? Start up here.
    ;;
    (let ((tl        (launch:setup))
	  (run-id    (and (args:get-arg "-run-id")
			  (string->number (args:get-arg "-run-id")))))
      (if run-id
	  (begin
	    (server:launch run-id)
	    (set! *didsomething* #t))
	  (debug:print 0 "ERROR: server requires run-id be specified with -run-id")))

    ;; Not a server? This section will decide how to communicate
    ;;
    ;;  Setup client for all expect listed here
    (if (null? (lset-intersection 
		equal?
		(hash-table-keys args:arg-hash)
		'("-list-servers"
		  "-stop-server"
		  "-show-cmdinfo"
		  "-list-runs"
		  "-ping")))
	(if (launch:setup)
	    (let ((run-id    (and (args:get-arg "-run-id")
				  (string->number (args:get-arg "-run-id")))))
	      ;; (set! *fdb*   (filedb:open-db (conc *toppath* "/db/paths.db")))
	      ;; if not list or kill then start a client (if appropriate)
	      (if (or (args-defined? "-h" "-version" "-gen-megatest-area" "-gen-megatest-test")
		      (eq? (length (hash-table-keys args:arg-hash)) 0))
		  (debug:print-info 1 "Server connection not needed")
		  (begin
		    ;; (if run-id 
		    ;;     (client:launch run-id) 
		    ;;     (client:launch 0)      ;; without run-id we'll start a server for "0"
		    #t
		    ))))))

;; MAY STILL NEED THIS
;;		       (set! *megatest-db* (make-dbr:dbstruct path: *toppath* local: #t))))))))))

(if (or (args:get-arg "-list-servers")
	(args:get-arg "-stop-server"))
    (let ((tl (launch:setup)))
      (if tl 
	  (let* ((tdbdat  (tasks:open-db))
		 (servers (tasks:get-all-servers (db:delay-if-busy tdbdat)))
		 (fmtstr  "~5a~12a~8a~20a~24a~10a~10a~10a~10a\n")
		 (servers-to-kill '())
		 (killinfo   (args:get-arg "-stop-server"))
		 (khost-port (if killinfo (if (substring-index ":" killinfo)(string-split ":") #f) #f))

		(configf:write-alist data cfgf)
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup-for-run force: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))

(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))
	;; keep this one local
	(cond
	 ((and (args:get-arg "-section")
	       (args:get-arg "-var"))
	  (let ((val (or (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))

	  (configf:config->ini data))
	 (else
	  (debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
	(set! *didsomething* #t))
      (pop-directory)))

(if (args:get-arg "-show-config")
    (let ((tl   (launch:setup))
	  (data *configdat*)) ;; (read-config "megatest.config" #f #t)))
      (push-directory *toppath*)
      ;; keep this one local
      (cond 
       ((and (args:get-arg "-section")
	     (args:get-arg "-var"))
	(let ((val (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))))

;; NOTE: list-runs and list-db-targets operate on local db!!!
;;
;; IDEA: megatest list -runname blah% ...
;;
(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))
    (if (launch:setup)
	(let* (;; (dbstruct    (make-dbr:dbstruct path: *toppath* local: (args:get-arg "-local")))
	       (runpatt     (args:get-arg "-list-runs"))
	       (testpatt    (common:args-get-testpatt #f))
	       ;; (if (args:get-arg "-testpatt") 
	       ;;  	        (args:get-arg "-testpatt") 
	       ;;  	        "%"))
	       (keys        (rmt:get-keys)) ;; (db:get-keys dbstruct))

		  (ods:list->ods tempdir ouf sheets))))
	  ;; (system (conc "rm -rf " tempdir))
	  (set! *didsomething* #t))))

;; Don't think I need this. Incorporated into -list-runs instead
;;
;; (if (and (args:get-arg "-since")
;; 	 (launch:setup))
;;     (let* ((since-time (string->number (args:get-arg "-since")))
;; 	   (run-ids    (db:get-changed-run-ids since-time)))
;;       ;; (rmt:get-tests-for-runs-mindata run-ids testpatt states status not-in)
;;       (print (sort run-ids <))
;;       (set! *didsomething* #t)))
      
      

	       (target    (args:get-arg "-target"))
	       (toppath   (assoc/default 'toppath   cmdinfo)))
	  (change-directory toppath)
	  (if (not target)
	      (begin
		(debug:print 0 "ERROR: -target is required.")
		(exit 1)))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, giving up on -test-paths or -test-files, exiting")
		(exit 1)))
	  (let* ((keys     (rmt:get-keys))
		 ;; db:test-get-paths must not be run remote
		 (paths    (tests:test-get-paths-matching keys target (args:get-arg "-test-files"))))
	    (set! *didsomething* #t)

	     (db-host   (assoc/default 'db-host   cmdinfo))
	     (run-id    (assoc/default 'run-id    cmdinfo))
	     (test-id   (assoc/default 'test-id   cmdinfo))
	     (itemdat   (assoc/default 'itemdat   cmdinfo))
	     (work-area (assoc/default 'work-area cmdinfo))
	     (db        #f))
	(change-directory testpath)
	(if (not (launch:setup))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    (rmt:teststep-set-status! run-id test-id step state status msg logfile)
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")

	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status")))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))

	  (if (args:get-arg "-runstep")(debug:print-info 1 "Running -runstep, first change to directory " work-area))
	  (change-directory work-area)
	  ;; can setup as client for server mode now

;; Various helper commands can go below here
;;======================================================================

(if (or (args:get-arg "-showkeys")
        (args:get-arg "-show-keys"))
    (let ((db #f)
	  (keys #f))
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (set! keys (rmt:get-keys)) ;;  db))
      (debug:print 1 "Keys: " (string-intersperse keys ", "))
      (if (sqlite3:database? db)(sqlite3:finalize! db))
      (set! *didsomething* #t)))

;;======================================================================
;; Update the database schema, clean up the db
;;======================================================================

(if (args:get-arg "-rebuild-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      (open-run-close patch-db #f)
      (set! *didsomething* #t)))

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; keep this one local
      ;; (open-run-close db:clean-up #f)
      (db:multi-db-sync 
       #f ;; do all run-ids
       ;; 'new2old
       'killservers
       'dejunk
       ;; 'adj-testids
       ;; 'old2new
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") b
	    (exit 1)))
      (open-run-close db:find-and-mark-incomplete #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

(if (args:get-arg "-update-meta")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      ;; now can find our db
      ;; keep this one local
      (open-run-close runs:update-all-test_meta #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Start a repl
;;======================================================================

;; fakeout readline

(if (or (args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup))
	   (dbstruct (if toppath (make-dbr:dbstruct path: toppath local: (args:get-arg "-local")) #f)))
      (if dbstruct
	  (begin
	    (set! *db* dbstruct)
	    (set! *client-non-blocking-mode* #t)
	    (import extras) ;; might not be needed
	    ;; (import csi)

;; Wait on a run to complete
;;======================================================================

(if (and (args:get-arg "-run-wait")
	 (not (or (args:get-arg "-run")
		  (args:get-arg "-runtests")))) ;; run-wait is built into runtests now
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting") 
	    (exit 1)))
      (operate-on 'run-wait)
      (set! *didsomething* #t)))

;; ;; ;; redo me ;; Not converted to use dbstruct yet

		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

(if (not (launch:setup))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

;; (if (args:get-arg "-host")
;;     (begin
;;       (set! *runremote* (string-split (args:get-arg "-host" ":")))

;; This is the *new* methodology. One record to inform them and in the chaos, organise them.
;;
;; NOT YET UTILIZED
;;
(define (runs:create-run-record)
  (let* ((mconfig      (if *configdat*
		           *configdat*
		           (if (launch:setup)
		               *configdat*
		               (begin
		                 (debug:print 0 "ERROR: Called setup in a non-megatest area, exiting")
		                 (exit 1)))))
	  (runrec      (runs:runrec-make-record))
	  (target      (common:args-get-target))
	  (runname     (common:args-get-runname))

      (exit 3))
     ((not runname)
      (debug:print 0 "ERROR: Missing required parameter for " switchname ", you must specify the run name with -runname runname")
      (exit 3))
     (else
      (let (;; (db   #f)
	    (keys #f))
	(if (launch:setup)
	    (begin
	      (full-runconfigs-read) ;; cache the run config
	      (launch:cache-config)) ;; do not cache here - need to be sure runconfigs is processed
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(set! keys (keys:config-get-fields *configdat*))

;;
(define (server:ping run-id host:port)
  (let ((tdbdat (tasks:open-db)))
    (let* ((host-port (let ((slst (string-split   host:port ":")))
			(if (eq? (length slst) 2)
			    (list (car slst)(string->number (cadr slst)))
			    #f)))
	   (toppath       (launch:setup))
	   (server-db-dat (if (not host-port)(tasks:get-server (db:delay-if-busy tdbdat) run-id) #f)))
      (if (not run-id)
	  (begin
	    (debug:print 0 "ERROR: must specify run-id when doing ping, -run-id n")
	    (print "ERROR: No run-id")
	    (exit 1))
	  (if (and (not host-port)