Megatest

                                   (delta (abs (- df disk-free))))
                              (if (and (> df 0)
                                       (> (/ delta df) 0.1)) ;; (> delta 200) ;; ignore changes under 200 Meg
                                  df
                                  #f)))
             (do-sync       (or new-cpu-load new-disk-free over-time))

	     ;;
	     ;; MOVE THIS TO A FILE FLAG BASED APPROACH (FOR NOW)
	     ;;
	     
             ;; (test-info   (rmt:get-test-state-status-by-id run-id test-id))
             ;; (state       (car test-info));; (db:test-get-state test-info))
             ;; (status      (cdr test-info));; (db:test-get-status test-info))
	     (killreq     (file-exists? (conc work-area"/kill-test"))) ;; (equal? state "KILLREQ"))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         (killreq
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         #;((equal? status "DEAD") ;; NEED ALTERNATIVE MECHANISM FOR THIS.
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)

	;; revisit logic in zombie handling.
	;;
        (if (common:low-noise-print 600 "run zombie") ;; every five minutes is plenty
	    (launch:handle-zombie-tests run-id))
	
        (when do-sync
          ;; (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)

	  (let ((oup (open-output-file (conc work-area"/.run-logging-stats.csv") :append))
		(csv (conc run-id","test-id","new-cpu-load","new-disk-free","(calc-minutes))))
	    (debug:print 0 *default-log-port* "Updating run log, csv="csv)
	    (with-output-to-port oup
	      (lambda ()
		(print csv)))
	    (close-output-port oup)))
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second

cleanup :
	killall mtest dboard -v -9 || true
	rm -rf *.log *.bak NB* logs/* .meta .db /tmp/$(USER)/megatest_localdb/simplerun ../simpleruns/* lt

Super simple test system - useful for testing db access.

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

[fields]
SYSTEM TEXT
RELEASE TEXT

[setup]
# Adjust max_concurrent_jobs to limit how much you load your machines
max_concurrent_jobs 50

[server]
timeout 3
# 3600

# Uncomment this to make the in-mem db into a disk based db (slower but good for debug)
# be aware that some unit tests will fail with this due to persistent data
#
# tmpdb /tmp

# This is your link path, you can move it but it is generally better to keep it stable
linktree #{getenv MT_RUN_AREA_HOME}/../simplelinks

# Valid values for state and status for steps, NB// It is not recommended you use this
[validvalues]
state start end completed

# Job tools are more advanced ways to control how your jobs are launched
[jobtools]
# useshell yes
launcher nbfake

# You can override environment variables for all your tests here
[env-override]
EXAMPLE_VAR example value

# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{getenv MT_RUN_AREA_HOME}/../simpleruns

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

[default]
ALLTESTS see this variable
!GLOBAL_WAITONS runfirst

# Your variables here are grouped by targets [SYSTEM/RELEASE]
[SYSTEM_val/RELEASE_val]
ANOTHERVAR only defined if target is SYSTEM_val/RELEASE_val

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

[section1]
1 ./blah

[section2]

# A comment

[disks]
1 ./

[validvalues]
state start end aborted
status pass fail n/a

[include a file that doesn't exist]


blah nada

# now inlcude a file tha tdoes exist
[include megatest.config]

[metadata]
description This is a multiline 
  description. The leading whitespace is discarded
  irrespective of amount of indenting.
     This line is indented more.
 

author matt
lastreview never

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh
step2 step2.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
PARTOFDAY morning noon afternoon evening night

[scripts]
step1.sh #!/bin/bash
  sleep 1

step2.sh #!/bin/bash
  sleep 2

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

# Add additional steps here. Format is "stepname script"
[ezsteps]
createsteps createsteps.sh

[scripts]
createsteps.sh #!/bin/bash
  (for x in $(seq 20);do
    echo "step$x sleep $x" 
   done) > #{getenv MT_RUN_AREA_HOME}/steps.config

[logpro]
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
# [items]
# PARTOFDAY morning noon afternoon evening night

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

# Add additional steps here. Format is "stepname script"
[ezsteps]
[include #{getenv MT_RUNAREAHOME}/steps.config]

# Test requirements are specified here
[requirements]
waiton test1
priority 0

# Iteration for your tests are controlled by the items section
[items]
LANDTYPE desert plains forest jungle beach

[logpro]
(expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
(expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
(expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Yet another example test
tags tagone,tagtwo,quick
reviewed never