Megatest

	mkdir -p ext-tests
	cd ext-tests;fossil open --nested $(MTQA_FOSSIL)

$(MTQA_FOSSIL) :
	fossil clone https://www.kiatoa.com/fossils/megatest_qa $(MTQA_FOSSIL)

clean : 
	rm -f $(OFILES) $(GOFILES) megatest dboard dboard.o megatest.o dashboard.o megatest-fossil-hash.*

# Deploy section (not complete yet)
#
$(DEPLOYHELPERS) : utils/mt_*
	$(INSTALL) $< $@
	chmod a+X $@

    get-num-runs
    get-all-run-ids
    get-prev-run-ids
    get-run-ids-matching-target
    get-runs-by-patt
    get-steps-data
    get-steps-for-test
    read-test-data
    login
    testmeta-get-record
    have-incompletes?
    synchash-get
    ))

(define api:write-queries

	    ((get-main-run-stats)           (apply db:get-main-run-stats dbstruct params))
	    ((get-var)                      (apply db:get-var dbstruct params))

	    ;; STEPS
	    ((get-steps-data)               (apply db:get-steps-data dbstruct params))
	    ((get-steps-for-test)           (apply db:get-steps-for-test dbstruct params))

	    ;; TEST DATA
	    ((read-test-data)               (apply db:read-test-data dbstruct params))

	    ;; MISC
	    ((have-incompletes?)            (apply db:have-incompletes? dbstruct params))
	    ((login)                        (apply db:login dbstruct params))
	    ((general-call)                 (let ((stmtname   (car params))
						  (run-id     (cadr params))
						  (realparams (cddr params)))
					      (db:with-db dbstruct run-id #t ;; these are all for modifying the db

  (set! *env-vars-by-run-id* (make-hash-table))
  (set! *test-id-cache*      (make-hash-table)))

;; Generic string database
(define sdb:qry #f) ;; (make-sdb:qry)) ;;  'init #f)
;; Generic path database
(define *fdb* #f)

;;======================================================================
;; V E R S I O N
;;======================================================================

(define (common:get-full-version)
  (conc megatest-version "-" megatest-fossil-hash))

(define (common:version-signature)
  (conc megatest-version "-" (substring megatest-fossil-hash 0 4)))

;; from metadat lookup MEGATEST_VERSION
;;
(define (common:get-last-run-version)
  (rmt:get-var "MEGATEST_VERSION"))

(define (common:set-last-run-version)
  (rmt:set-var "MEGATEST_VERSION" (common:version-signature)))

(define (common:version-changed?)
  (not (equal? (common:get-last-run-version)
	       (common:version-signature))))

(define (common:exit-on-version-changed)
  (if (common:version-changed?)
      (begin
	(debug:print 0
		     "ERROR: Version mismatch!\n"
		     "   expected: " (common:version-signature) "\n"
		     "   got:      " (common:get-last-run-version) "\n"
		     " to switch versions you can run: \"megatest -cleanup-db\"")
	(exit 1))))

;;======================================================================
;; S P A R S E   A R R A Y S
;;======================================================================

(define (make-sparse-array)
  (let ((a (make-sparse-vector)))
    (sparse-vector-set! a 0 (make-sparse-vector))
    a))

(define (sparse-array? a)
  (and (sparse-vector? a)
       (sparse-vector? (sparse-vector-ref a 0))))

(define (sparse-array-ref a x y)
  (let ((row (sparse-vector-ref a x)))
    (if row
	(sparse-vector-ref row y)
	#f)))

(define (sparse-array-set! a x y val)
  (let ((row (sparse-vector-ref a x)))
    (if row
	(sparse-vector-set! row y val)
	(let ((new-row (make-sparse-vector)))
	  (sparse-vector-set! a x new-row)
	  (sparse-vector-set! new-row y val)))))

;;======================================================================
;; L O C K E R S   A N D   B L O C K E R S 
;;======================================================================

;; block further accesses to databases. Call this before shutting db down
(define (common:db-block-further-queries)

  (set! *time-to-exit* #t)
  (debug:print 0 "ERROR: Received signal " signum " exiting promptly")
  ;; (std-exit-procedure) ;; shouldn't need this since we are exiting and it will be called anyway
  (exit))

(set-signal-handler! signal/int  std-signal-handler)  ;; ^C
(set-signal-handler! signal/term std-signal-handler)
;; (set-signal-handler! signal/stop std-signal-handler)  ;; ^Z NO, do NOT handle ^Z!

;;======================================================================
;; M I S C   U T I L S
;;======================================================================

;; Convert strings like "5s 2h 3m" => 60x60x2 + 3x60 + 5
(define (common:hms-string->seconds tstr)

							      ((m) 60)
							      ((h) (* 60 60))
							      ((d) (* 24 60 60))
							      (else 0))))))))))
	      parts)
    time-secs))
		       



;; one-of args defined
(define (args-defined? . param)
  (let ((res #f))
    (for-each 
     (lambda (arg)
       (if (args:get-arg arg)(set! res #t)))
     param)

	(loop (max hed max-val)
	      (car tal)
	      (cdr tal))
	(max hed max-val))))


;;======================================================================
;; M U N G E   D A T A   I N T O   N I C E   F O R M S
;;======================================================================

;; Generate an index for a sparse list of key values
;;   ( (rowname1 colname1 val1)(rowname2 colname2 val2) )
;;
;; => 
;;

		    new-rownames
		    new-colnames
		    (if (> curr-rownum rownum) curr-rownum rownum)
		    (if (> curr-colnum colnum) curr-colnum colnum)
		    ))))))

;;======================================================================
;; S Y S T E M   S T U F F
;;======================================================================

;; return a nice clean pathname made absolute
(define (nice-path dir)
  (normalize-pathname (if (absolute-pathname? dir)
			  dir
			  (conc (current-directory) "/" dir))))

;; given path get free space, allows override in [setup]
;; with free-space-script /path/to/some/script.sh
;;
(define (get-df path)
  (if (configf:lookup *configdat* "setup" "free-space-script")
      (with-input-from-pipe 
       (conc (configf:lookup *configdat* "setup" "free-space-script") " " path)
       (lambda ()
	 (let ((res (read-line)))
	   (if (string? res)
	       (string->number res)))))
      (get-unix-df path)))

(define (get-unix-df path)

    (hash-table-for-each
     vars
     (lambda (var val)
       (setenv var val)))
    vars))
		  
;;======================================================================
;; T I M E   A N D   D A T E
;;======================================================================

(define (seconds->hr-min-sec secs)
  (let* ((hrs (quotient secs 3600))
	 (min (quotient (- secs (* hrs 3600)) 60))
	 (sec (- secs (* hrs 3600)(* min 60))))
    (conc (if (> hrs 0)(conc hrs "hr ") "")

    ((1 2 3) 1)
    ((4 5 6) 2)
    ((7 8 9) 3)
    ((10 11 12) 4)
    (else #f)))

;;======================================================================
;; C O L O R S
;;======================================================================
      
(define (common:name->iup-color name)
  (case (string->symbol (string-downcase name))
    ((red)    "223 33 49")
    ((grey)   "192 192 192")
    ((orange) "255 172 13")

	       ;; These next two are intentional bad values to ensure errors if they should not
	       ;; get filled in properly.
	       (logfile       "/this/dir/better/not/exist")
	       (rundir        (if testdat 
				  (db:test-get-rundir testdat)
				  logfile))
	       ;; (testdat-path  (conc rundir "/testdat.db")) ;; this gets recalculated until found 
	       (teststeps     (if testdat (tests:get-compressed-steps run-id test-id) '()))
	       (testfullname  (if testdat (db:test-get-fullname testdat) "Gathering data ..."))
	       (testname      (if testdat (db:test-get-testname testdat) "n/a"))
	       ;; (tests:get-testconfig testdat testname 'return-procs))
	       (testmeta      (if testdat 
				  (let ((tm (rmt:testmeta-get-record testname)))
				    (if tm tm (make-db:testmeta)))
				  (make-db:testmeta)))

						     exn 
						     (debug:print-info 0 "test db access issue in examine test for run-id " run-id ", test-id " test-id ": " ((condition-property-accessor 'exn 'message) exn))
						     (rmt:get-test-info-by-id run-id test-id )))))
			       ;; (debug:print-info 0 "need-update= " need-update " curr-mod-time = " curr-mod-time)
			       (cond
				((and need-update newtestdat)
				 (set! testdat newtestdat)
				 (set! teststeps    (tests:get-compressed-steps run-id test-id))
				 (set! logfile      (conc (db:test-get-rundir testdat) "/" (db:test-get-final_logf testdat)))
				 (set! rundir       ;; (filedb:get-path *fdb* 
				       (db:test-get-rundir testdat)) ;; )
				 (set! testfullname (db:test-get-fullname testdat))
				 ;; (debug:print 0 "INFO: teststeps=" (intersperse teststeps "\n    "))
				 
				 ;; I don't see why this was implemented this way. Please comment it ...

	       (run-test  (lambda (x)
			    (iup:attribute-set! 
			     command-text-box "VALUE"
			     (conc "megatest -target " keystring " -runname " runname 
				   " -run -testpatt " (conc testname "/" (if (equal? item-path "")
									"%" 
									item-path))
				   " -clean-cache"
				   ))))
	       (remove-test (lambda (x)
			      (iup:attribute-set!
			       command-text-box "VALUE"
			       (conc "megatest -remove-runs -target " keystring " -runname " runname
				     " -testpatt " (conc testname "/" (if (equal? item-path "")
									  "%"
									  item-path))
				     " -v"))))
	       (clean-run-execute  (lambda (x)
				     (let ((cmd (conc "megatest -remove-runs -target " keystring " -runname " runname
						      " -testpatt " (conc testname "/" (if (equal? item-path "")
						       					   "%"
						       					   item-path))
						      ";megatest -target " keystring " -runname " runname 
						      " -run -preclean -testpatt " (conc testname "/" (if (equal? item-path "")
											   "%" 
											   item-path))
						      " -clean-cache"
						      )))
				       (common:without-vars
					(conc (dtests:get-pre-command)
					      cmd 
					      (dtests:get-post-command))
					"MT_.*"))))
	       (remove-test (lambda (x)

			       (let ((tabs 
				      (iup:tabs
				       ;; Replace here with matrix
				       (let ((steps-matrix (iup:matrix
							    #:font   "Courier New, -8"
							    #:expand "YES"
							    #:scrollbar "YES"
							    #:numcol 7
							    #:numlin 100
							    #:numcol-visible 7
							    #:numlin-visible 5
							    #:click-cb (lambda (obj lin col status)
									 ;; (if (equal? col 6)
									 (let* ((mtrx-rc (conc lin ":" 6))
										(fname   (iup:attribute obj mtrx-rc))) ;; col))))
									   (if (eq? col 6)
									       (view-a-log fname)

					 (iup:attribute-set! steps-matrix "0:2" "Start")
					 (iup:attribute-set! steps-matrix "0:3" "End")
					 (iup:attribute-set! steps-matrix "WIDTH3" "50")
					 (iup:attribute-set! steps-matrix "0:4" "Status")
					 (iup:attribute-set! steps-matrix "WIDTH4" "50")
					 (iup:attribute-set! steps-matrix "0:5" "Duration")
					 (iup:attribute-set! steps-matrix "0:6" "Log File")
					 (iup:attribute-set! steps-matrix "0:7" "Comment")
					 (iup:attribute-set! steps-matrix "ALIGNMENT1" "ALEFT")
					 ;; (iup:attribute-set! steps-matrix "FIXTOTEXT" "C1")
					 (iup:attribute-set! steps-matrix "RESIZEMATRIX" "YES")
					 (let ((proc
						(lambda (testdat)
						  (dcommon:populate-steps teststeps steps-matrix))))
					   (hash-table-set! widgets "StepsMatrix" proc)

(include "common_records.scm")
(include "db_records.scm")
(include "run_records.scm")
(include "megatest-fossil-hash.scm")

(define help (conc 
	      "Megatest Dashboard, documentation at http://www.kiatoa.com/fossils/megatest
  version " megatest-version "
  license GPL, Copyright (C) Matt Welland 2012-2016

Usage: dashboard [options]
  -h                   : this help
  -server host:port    : connect to host:port instead of db access
  -test run-id,test-id : control test identified by testid

		 (list  "-h"
			"-use-server"
			"-guimonitor"
			"-main"
			"-v"
			"-q"
			"-use-local"
			)
		 args:arg-hash
		 0))

(if (args:get-arg "-h")
    (begin
      (print help)
      (exit)))

  allruns-by-id
  buttondat 
  curr-tab-num
  dbdir
  dbfpath
  dbkeys 
  dblocal
  filters-changed
  header      
  hide-empty-runs
  hide-not-hide  ;; toggle for hide/not hide
  hide-not-hide-button
  hide-not-hide-tabs
  item-test-names
  keys

  state-ignore-hash
  status-ignore-hash
  tot-runs   
  update-mutex
  updaters
  updating
  useserver  
  )

(define *alldat* (make-d:alldat
		  header: #f 
		  allruns: '()
		  allruns-by-id: (make-hash-table)
		  buttondat: (make-hash-table)
		  searchpatts: (make-hash-table)

		  state-ignore-hash: (make-hash-table)
		  hide-empty-runs: #f
		  hide-not-hide: #t
		  hide-not-hide-button: #f
		  hide-not-hide-tabs: #f
		  curr-tab-num: 0
		  updaters: (make-hash-table)

		  filters-changed: #f





		  ))



















;; data for runs, tests etc
;;
(defstruct d:rundat
  ;; new system
  runs-index    ;; target/runname => colnum
  tests-index   ;; testname/itempath => rownum
  matrix-dat    ;; vector of vectors rows/cols

(define (colors-similar? color1 color2)
  (let* ((c1    (map string->number (string-split color1)))
	 (c2    (map string->number (string-split color2)))
	 (delta (map (lambda (a b)(abs (- a b))) c1 c2)))
    (null? (filter (lambda (x)(> x 3)) delta))))

(define (dboard:compare-tests test1 test2)
  (let* ((test-name1  (db:test-get-testname  test1))
	 (item-path1  (db:test-get-item-path test1))
	 (eventtime1  (db:test-get-event_time test1))
	 (test-name2  (db:test-get-testname  test2))
	 (item-path2  (db:test-get-item-path test2))
	 (eventtime2  (db:test-get-event_time test2))
	 (same-name   (equal? test-name1 test-name2))
	 (test1-top   (equal? item-path1 ""))
	 (test2-top   (equal? item-path2 ""))
	 (test1-older (> eventtime1 eventtime2))
	 (same-time   (equal? eventtime1 eventtime2)))			 
    (if same-name
	(if same-time
	    (string>? item-path1 item-path2)
	    test1-older)
	(if same-time
	    (string>? test-name1 test-name2)
	    test1-older))))

;; This is roughly the same as dboard:get-tests-dat, should merge them if possible
;;
(define (dboard:get-tests-for-run-duplicate data run-id run testnamepatt key-vals)









  (let* ((states      (hash-table-keys (d:alldat-state-ignore-hash data)))
	 (statuses    (hash-table-keys (d:alldat-status-ignore-hash data)))
	 (sort-info   (get-curr-sort))
	 (sort-by     (vector-ref sort-info 1))
	 (sort-order  (vector-ref sort-info 2))
	 (bubble-type (if (member sort-order '(testname))
			  'testname
			  'itempath))
	 (prev-dat    (let ((rec (hash-table-ref/default (d:alldat-allruns-by-id data) run-id #f)))
			(if rec rec (vector run '() key-vals -100)))) ;; -100 is before time began
	 (prev-tests  (vector-ref prev-dat 1))
	 (last-update (vector-ref prev-dat 3))
	 (tmptests    (if (d:alldat-useserver data)
			  (rmt:get-tests-for-run run-id testnamepatt states statuses
						 #f #f
						 (d:alldat-hide-not-hide data)
						 sort-by
						 sort-order
						 'shortlist
						 (if (d:alldat-filters-changed data)
						     0
						     last-update))
			  (db:get-tests-for-run (d:alldat-dblocal data) run-id testnamepatt states statuses
						#f #f
						(d:alldat-hide-not-hide data)
						sort-by
						sort-order
						'shortlist
						(if (d:alldat-filters-changed data)
						    0
						    last-update))))
	 (tests       (let ((newdat (filter
				     (lambda (x)
				       (not (equal? (db:test-get-state x) "DELETED"))) ;; remove deleted tests but do it after merging
				     (delete-duplicates (if (d:alldat-filters-changed data)
							    tmptests
							    (append tmptests prev-tests))
							(lambda (a b)
							  (eq? (db:test-get-id a)(db:test-get-id b)))))))
			(if (eq? *tests-sort-reverse* 3) ;; +event_time
			    (sort newdat dboard:compare-tests)
			    newdat))))
    (vector-set! prev-dat 3 (- (current-seconds) 2)) ;; go back two seconds in time to ensure all changes are captured.
    ;; (debug:print 0 "(dboard:get-tests-for-run-duplicate: filters-changed=" (d:alldat-filters-changed data) " last-update=" last-update " got " (length tmptests) " test records for run " run-id)
    tests))

;; create a virtual table of all the tests
;; keypatts: ( (KEY1 "abc%def")(KEY2 "%") )
(define (update-rundat data runnamepatt numruns testnamepatt keypatts)
  (let* ((referenced-run-ids '())
	 (allruns     (if (d:alldat-useserver data)
			  (rmt:get-runs runnamepatt numruns (d:alldat-start-run-offset data) keypatts)
			  (db:get-runs (d:alldat-dblocal data) runnamepatt numruns ;; (+ numruns 1) ;; (/ numruns 2))
				       (d:alldat-start-run-offset data) keypatts)))
	 (header      (db:get-header allruns))
	 (runs        (db:get-rows   allruns))
	 (result      '())
	 (maxtests    0)
)
    ;; 
    ;; trim runs to only those that are changing often here
    ;; 
    (for-each (lambda (run)
		(let* ((run-id      (db:get-value-by-header run header "id"))
		       (key-vals    (if (d:alldat-useserver data) 
					(rmt:get-key-vals run-id)
					(db:get-key-vals (d:alldat-dblocal data) run-id)))





		       (tests       (dboard:get-tests-for-run-duplicate data run-id run testnamepatt key-vals)))






















		  ;; NOTE: bubble-up also sets the global (d:alldat-item-test-names data)
		  ;; (tests       (bubble-up tmptests priority: bubble-type))
		  ;; NOTE: 11/01/2013 This routine is *NOT* getting called excessively.
		  ;; (debug:print 0 "Getting data for run " run-id " with key-vals=" key-vals)
		  ;; Not sure this is needed?
		  (set! referenced-run-ids (cons run-id referenced-run-ids))
		  (if (> (length tests) maxtests)
		      (set! maxtests (length tests)))
		  (if (or (not (d:alldat-hide-empty-runs data)) ;; this reduces the data burden when set
			  (not (null? tests)))
		      (let ((dstruct (vector run tests key-vals (- (current-seconds) 10))))
			(hash-table-set! (d:alldat-allruns-by-id data) run-id dstruct)
			(set! result (cons dstruct result))))))
	      runs)

    (d:alldat-header-set! data header)
    (d:alldat-allruns-set! data result)
    (debug:print-info 6 "(d:alldat-allruns data) has " (length (d:alldat-allruns data)) " runs")
    maxtests))

(define *collapsed* (make-hash-table))
					; (define *row-lookup* (make-hash-table)) ;; testname => (rownum lableobj)

(define (toggle-hide lnum) ; fulltestname)
  (let* ((btn (vector-ref (dboard:uidat-get-lftcol uidat) lnum))
	 (fulltestname (iup:attribute btn "TITLE"))
	 (parts        (string-split fulltestname "("))
	 (basetestname (if (null? parts) "" (car parts))))
					;(print "Toggling " basetestname " currently " (hash-table-ref/default *collapsed* basetestname #f))
    (if (hash-table-ref/default *collapsed* basetestname #f)
	(begin
					;(iup:attribute-set! btn "FGCOLOR" "0 0 0")
	  (hash-table-delete! *collapsed* basetestname))
	(begin
					;(iup:attribute-set! btn "FGCOLOR" "0 192 192")
	  (hash-table-set! *collapsed* basetestname #t)))))

(define blank-line-rx (regexp "^\\s*$"))

(define (run-item-name->vectors lst)
  (map (lambda (x)
	 (let ((splst (string-split x "("))
	       (res   (vector "" "")))
	   (vector-set! res 0 (car splst))

	 (vlst         (run-item-name->vectors newlst))
	 (vlst2        (bubble-up vlst priority: bubble-type)))
    (map (lambda (x)
	   (if (equal? (vector-ref x 1) "")
	       (vector-ref x 0)
	       (conc (vector-ref x 0) "(" (vector-ref x 1) ")")))
	 vlst2)))

(define (update-labels uidat)
  (let* ((rown    0)
	 (keycol  (dboard:uidat-get-keycol uidat))
	 (lftcol  (dboard:uidat-get-lftcol uidat))
	 (numcols (vector-length lftcol))
	 (maxn    (- numcols 1))
	 (allvals (make-vector numcols "")))

	  (let loop ((hed (car tnames))
		     (tal (cdr tnames))
		     (res '()))
	    (let ((newres (append res (hash-table-ref tests hed))))
	      (if (null? tal)
		  newres
		  (loop (car tal)(cdr tal) newres))))))))

(define (update-buttons uidat numruns numtests)
  (let* ((runs        (if (> (length (d:alldat-allruns *alldat*)) numruns)
			  (take-right (d:alldat-allruns *alldat*) numruns)
			  (pad-list (d:alldat-allruns *alldat*) numruns)))
	 (lftcol      (dboard:uidat-get-lftcol uidat))
	 (tableheader (dboard:uidat-get-header uidat))
	 (table       (dboard:uidat-get-runsvec uidat))

	(status-changed (not (null? (hash-table-keys (d:alldat-status-ignore-hash *alldat*))))))
    (iup:attribute-set! (d:alldat-hide-not-hide-tabs *alldat*) "BGCOLOR"
			(if (or search-changed
				state-changed
				status-changed)
			    "190 180 190"
			    "190 190 190"
			    ))
    (d:alldat-filters-changed-set! *alldat* #t)))

(define (update-search x val)
  (hash-table-set! (d:alldat-searchpatts *alldat*) x val)
  (d:alldat-filters-changed-set! *alldat* #t)
  (set-bg-on-filter))

(define (mark-for-update)
  (d:alldat-last-db-update-set! *alldat* 0))

;;======================================================================
;; R U N C O N T R O L

	 (statuses     (dboard:data-get-statuses   *data*))
	 (target       (let ((targ-list (dboard:data-get-target     *data*)))
			 (if targ-list (string-intersperse targ-list "/") "no-target-selected")))
	 (run-name     (dboard:data-get-run-name   *data*))
	 (states-str   (if (or (not states)
			       (null? states))
			   ""
			   (conc " -state "  (string-intersperse states ","))))
	 (statuses-str (if (or (not statuses)
			       (null? statuses))
			   ""
			   (conc " -status " (string-intersperse statuses ","))))
	 (full-cmd  "megatest"))
    (case (string->symbol cmd)
      ((run)
       (set! full-cmd (conc full-cmd 
			    " -run"
			    " -testpatt "
			    test-patt
			    " -target "
			    target
			    " -runname "
			    run-name
			    " -clean-cache"
			    )))
      ((remove-runs)
       (set! full-cmd (conc full-cmd
			    " -remove-runs -runname "
			    run-name
			    " -target " 
			    target

;; Display the tests as rows of boxes on the test/task pane
;;
(define (dashboard:draw-tests cnv xadj yadj tests-draw-state sorted-testnames test-records)
  (canvas-clear! cnv)
  (canvas-font-set! cnv "Helvetica, -10")
  (let-values (((sizex sizey sizexmm sizeymm) (canvas-size cnv))
	       ((originx originy)             (canvas-origin cnv)))
    ;; (print "originx: " originx " originy: " originy)
    ;; (canvas-origin-set! cnv 0 (- (/ sizey 2)))
    (if (hash-table-ref/default tests-draw-state 'first-time #t)
	(begin
	  (hash-table-set! tests-draw-state 'first-time #f)
	  (hash-table-set! tests-draw-state 'scalef 1)
	  (hash-table-set! tests-draw-state 'tests-info (make-hash-table))
	  (hash-table-set! tests-draw-state 'selected-tests (make-hash-table))
	  ;; set these 
	  (dcommon:initial-draw-tests cnv xadj yadj sizex sizey sizexmm sizeymm originx originy tests-draw-state sorted-testnames test-records))
	(dcommon:redraw-tests cnv xadj yadj sizex sizey sizexmm sizeymm originx originy tests-draw-state sorted-testnames test-records))
    ))

;;======================================================================
;; R U N   C O N T R O L S
;;======================================================================
;;
;; A gui for launching tests
;;
(define (dashboard:run-controls)
  (let* ((targets       (make-hash-table))
	 (test-records  (make-hash-table))
	 (all-tests-registry (tests:get-all)) ;; (tests:get-valid-tests *toppath* '()))
	 (test-names    (hash-table-keys all-tests-registry))
	 (sorted-testnames #f)
	 (action        "-run")
	 (cmdln         "")
	 (runlogs       (make-hash-table))
	 (key-listboxes #f)
	 (updater-for-runs #f)
	 (update-keyvals (lambda ()
			   (let ((targ (map (lambda (x)
					      (iup:attribute x "VALUE"))
					    (car (dashboard:update-target-selector key-listboxes))))
				 (curr-runname (dboard:data-get-run-name *data*)))
			     (dboard:data-set-target! *data* targ)
			     (if updater-for-runs (updater-for-runs))
			     (if (or (not (equal? curr-runname (dboard:data-get-run-name *data*)))
				     (equal? (dboard:data-get-run-name *data*) ""))
				 (dboard:data-set-run-name! *data* curr-runname))
			     (dashboard:update-run-command))))
	 (tests-draw-state (make-hash-table)) ;; use for keeping state of the test canvas
	 (test-patterns-textbox  #f))
    (hash-table-set! tests-draw-state 'first-time #t)
    ;; (hash-table-set! tests-draw-state 'scalef 1)
    (tests:get-full-data test-names test-records '() all-tests-registry)
    (set! sorted-testnames (tests:sort-by-priority-and-waiton test-records))

       ;;
       (iup:vbox
	;; Command to run
	(iup:frame
	 #:title "Set the action to take"
	 (iup:hbox
	  ;; (iup:label "Command to run" #:expand "HORIZONTAL" #:size "70x" #:alignment "LEFT:ACENTER")
	  (let* ((cmds-list '("run" "remove-runs" "set-state-status" "lock-runs" "unlock-runs"))
		 (lb         (iup:listbox #:expand "HORIZONTAL"
					  #:dropdown "YES"
					  #:action (lambda (obj val index lbstate)
						     ;; (print obj " " val " " index " " lbstate)
						     (dboard:data-set-command! *data* val)
						     (dashboard:update-run-command))))
		 (default-cmd (car cmds-list)))
	    (iuplistbox-fill-list lb cmds-list selected-item: default-cmd)
	    (dboard:data-set-command! *data* default-cmd)
	    lb)))

	(iup:frame
	 #:title "Runname"
	 (let* ((default-run-name (seconds->work-week/day (current-seconds)))
		(tb (iup:textbox #:expand "HORIZONTAL"
				 #:action (lambda (obj val txt)
					    ;; (print "obj: " obj " val: " val " unk: " unk)
					    (dboard:data-set-run-name! *data* txt) ;; (iup:attribute obj "VALUE"))
					    (dashboard:update-run-command))
				 #:value (or default-run-name (dboard:data-get-run-name *data*))))
		(lb (iup:listbox #:expand "HORIZONTAL"
				 #:dropdown "YES"
				 #:action (lambda (obj val index lbstate)
					    (if (not (equal? val ""))
						(begin
						  (iup:attribute-set! tb "VALUE" val)
						  (dboard:data-set-run-name! *data* val)
						  (dashboard:update-run-command))))))
		(refresh-runs-list (lambda ()
				     (let* ((target        (dboard:data-get-target-string *data*))
					    (runs-for-targ (if (d:alldat-useserver *alldat*)
							       (rmt:get-runs-by-patt (d:alldat-keys *alldat*) "%" target #f #f #f)
							       (db:get-runs-by-patt (d:alldat-dblocal *alldat*) (d:alldat-keys *alldat*) "%" target #f #f #f)))
					    (runs-header   (vector-ref runs-for-targ 0))
					    (runs-dat      (vector-ref runs-for-targ 1))
					    (run-names     (cons default-run-name 
								 (map (lambda (x)
									(db:get-value-by-header x runs-header "runname"))
								      runs-dat))))
				       ;; (iup:attribute-set! lb "REMOVEITEM" "ALL")
				       (iuplistbox-fill-list lb run-names selected-item: default-run-name)))))
	   (set! updater-for-runs refresh-runs-list)
	   (refresh-runs-list)
	   (dboard:data-set-run-name! *data* default-run-name)
	   (iup:hbox
	    tb
	    lb)))

	   (iup:frame
	    #:title "Statuses"
	    (dashboard:text-list-toggle-box 
	     (map cadr *common:std-statuses*) ;; '("PASS" "FAIL" "n/a" "CHECK" "WAIVED" "SKIP" "DELETED" "STUCK/DEAD")
	     (lambda (all)
	       (dboard:data-set-statuses! *data* all)
	       (dashboard:update-run-command))))))))
       
       (iup:frame
	#:title "Tests and Tasks"
	(let* ((updater #f)
	       (last-xadj 0)
	       (last-yadj 0)
	       (the-cnv   #f)
	       (canvas-obj 

			    ;; #:size "50x50"
			    #:expand "YES"
			    #:scrollbar "YES"
			    #:posx "0.5"
			    #:posy "0.5"
			    #:button-cb (lambda (obj btn pressed x y status)
					  ;; (print "obj: " obj ", pressed " pressed ", status " status)
					; (print "canvas-origin: " (canvas-origin the-cnv))
					  ;; (let-values (((xx yy)(canvas-origin the-cnv)))
					  ;; (canvas-transform-set! the-cnv #f)
					  ;; (print "canvas-origin: " xx " " yy " click at " x " " y))
					  (let* ((tests-info     (hash-table-ref tests-draw-state 'tests-info))
						 (selected-tests (hash-table-ref tests-draw-state 'selected-tests))
						 (scalef         (hash-table-ref tests-draw-state 'scalef))
						 (sizey          (hash-table-ref tests-draw-state 'sizey))
						 (xoffset        (dcommon:get-xoffset tests-draw-state #f #f))
						 (yoffset        (dcommon:get-yoffset tests-draw-state #f #f))
						 (new-y          (- sizey y)))

								  (hash-table-set! selected-tests test-name selected)
								  (iup:attribute-set! test-patterns-textbox "VALUE" newpatt)
								  (dboard:data-set-test-patts! *data* (dboard:lines->test-patt newpatt))
								  (dashboard:update-run-command)
								  (if updater (updater last-xadj last-yadj)))))))
						      (hash-table-keys tests-info)))))))
	  canvas-obj)))
      
      (iup:frame
       #:title "Logs" ;; To be replaced with tabs
       (let ((logs-tb (iup:textbox #:expand "YES"
				   #:multiline "YES")))
	 (dboard:data-set-logs-textbox! *data* logs-tb)
	 logs-tb))))))

;;      )))

;;======================================================================
;; S U M M A R Y 
;;======================================================================
;;
;; General info about the run(s) and megatest area
(define (dashboard:summary data)
  (let* ((db               (d:alldat-dblocal data))
	 (rawconfig        (read-config (conc *toppath* "/megatest.config") #f #f))) ;; changed to #f since I want #{} to be expanded by [system ...] to NOT be expanded. WAS: 'return-string)))
    (iup:vbox
     (iup:split
      #:value 500
      (iup:frame 
       #:title "General Info"
       (iup:vbox
	(iup:hbox

(define (tree-path->run-id data path)
  (if (not (null? path))
      (hash-table-ref/default (d:data-path-run-ids data) path #f)
      #f))

(define dashboard:update-run-summary-tab #f)
(define dashboard:update-new-view-tab #f)

(define (dboard:get-tests-dat data run-id last-update)
  (let ((tdat (if run-id
		  (if (d:alldat-useserver data)
		      (rmt:get-tests-for-run run-id 
					     (hash-table-ref/default (d:alldat-searchpatts data) "test-name" "%/%")
					     (hash-table-keys (d:alldat-state-ignore-hash data)) ;; '()
					     (hash-table-keys (d:alldat-status-ignore-hash data)) ;; '()
					     #f #f
					     (d:alldat-hide-not-hide data)
					     #f #f
					     "id,testname,item_path,state,status"
					     (if (d:alldat-filters-changed data)
						 0
						 last-update)) ;; get 'em all
		      (db:get-tests-for-run db run-id 
					    (hash-table-ref/default (d:alldat-searchpatts data) "test-name" "%/%")
					    (hash-table-keys (d:alldat-state-ignore-hash data)) ;; '()
					    (hash-table-keys (d:alldat-status-ignore-hash data)) ;; '()
					    #f #f
					    (d:alldat-hide-not-hide data)
					    #f #f
					    "id,testname,item_path,state,status"
					    (if (d:alldat-filters-changed data)
						0
						last-update)))
		  '()))) ;; get 'em all
    (debug:print 0 "dboard:get-tests-dat: got " (length tdat) " test records for run " run-id)
    (sort tdat (lambda (a b)
		 (let* ((aval (vector-ref a 2))
			(bval (vector-ref b 2))
			(anum (string->number aval))
			(bnum (string->number bval)))
		   (if (and anum bnum)
		       (< anum bnum)
		       (string<= aval bval)))))))

;; This is the Run Summary tab
;; 
(define (dashboard:one-run db data ddata)
  (let* ((tb      (iup:treebox
		   #:value 0
		   #:name "Runs"
		   #:expand "YES"
		   #:addexpanded "NO"
		   #:selection-cb
		   (lambda (obj id state)
		     ;; (print "obj: " obj ", id: " id ", state: " state)
		     (let* ((run-path (tree:node->path obj id))
			    (run-id   (tree-path->run-id ddata (cdr run-path))))
		       (if (number? run-id)
			   (begin
			     (d:data-curr-run-id-set! ddata run-id)
			     (dashboard:update-run-summary-tab))
			   (debug:print 0 "ERROR: tree-path->run-id returned non-number " run-id)))
		     ;; (print "path: " (tree:node->path obj id) " run-id: " run-id)
		     )))
	 (cell-lookup (make-hash-table))
	 (run-matrix (iup:matrix
		      #:expand "YES"
		      #:click-cb
		      (lambda (obj lin col status)
			(let* ((toolpath (car (argv)))
			       (key      (conc lin ":" col))
			       (test-id  (hash-table-ref/default cell-lookup key -1))
			       (cmd      (conc toolpath " -test " (d:data-curr-run-id ddata) "," test-id "&")))
			  (system cmd)))))
	 (updater  (lambda ()
		     (let* ((runs-dat     (if (d:alldat-useserver data)
					      (rmt:get-runs-by-patt (d:alldat-keys data) "%" #f #f #f #f)
					      (db:get-runs-by-patt db (d:alldat-keys data) "%" #f #f #f #f)))
			    (runs-header  (vector-ref runs-dat 0)) ;; 0 is header, 1 is list of records
			    (run-id       (d:data-curr-run-id ddata))
			    (last-update  0) ;; fix me



















			    (tests-dat    (dboard:get-tests-dat data run-id last-update))









			    (tests-mindat (dcommon:minimize-test-data tests-dat))
			    (indices      (common:sparse-list-generate-index tests-mindat)) ;;  proc: set-cell))
			    (row-indices  (cadr indices))
			    (col-indices  (car indices))
			    (max-row      (if (null? row-indices) 1 (common:max (map cadr row-indices))))
			    (max-col      (if (null? col-indices) 1 (common:max (map cadr col-indices))))
			    (max-visible  (max (- (d:alldat-num-tests data) 15) 3)) ;; (d:alldat-num-tests data) is proportional to the size of the window
			    (numrows      1)
			    (numcols      1)
			    (changed      #f)
			    (runs-hash    (let ((ht (make-hash-table)))
					    (for-each (lambda (run)
							(hash-table-set! ht (db:get-value-by-header run runs-header "id") run))
						      (vector-ref runs-dat 1))
					    ht))
			    (run-ids      (sort (filter number? (hash-table-keys runs-hash))
						(lambda (a b)
						  (let* ((record-a (hash-table-ref runs-hash a))
							 (record-b (hash-table-ref runs-hash b))
							 (time-a   (db:get-value-by-header record-a runs-header "event_time"))
							 (time-b   (db:get-value-by-header record-b runs-header "event_time")))
						    (< time-a time-b))))))
		       
		       (d:alldat-filters-changed-set! data #f)
		       ;; (iup:attribute-set! tb "VALUE" "0")
		       ;; (iup:attribute-set! tb "NAME" "Runs")
		       ;; Update the runs tree
		       (for-each (lambda (run-id)
				   (let* ((run-record (hash-table-ref/default runs-hash run-id #f))
					  (key-vals   (map (lambda (key)(db:get-value-by-header run-record runs-header key))
							   (d:alldat-keys data)))
					  (run-name   (db:get-value-by-header run-record runs-header "runname"))
					  (col-name   (conc (string-intersperse key-vals "\n") "\n" run-name))
					  (run-path   (append key-vals (list run-name)))
					  (existing   (tree:find-node tb run-path)))
				     (if (not (hash-table-ref/default (d:data-path-run-ids ddata) run-path #f))
					 (begin
					   (hash-table-set! (d:data-run-keys ddata) run-id run-path)
					   ;; (iup:attribute-set! (dboard:data-get-runs-matrix *data*)
					   ;;    		 (conc rownum ":" colnum) col-name)
					   ;; (hash-table-set! runid-to-col run-id (list colnum run-record))
					   ;; Here we update the tests treebox and tree keys
					   (tree:add-node tb "Runs" run-path ;; (append key-vals (list run-name))
							  userdata: (conc "run-id: " run-id))
					   (hash-table-set! (d:data-path-run-ids ddata) run-path run-id)
					   ;; (set! colnum (+ colnum 1))
					   ))))
				 run-ids)
		       (iup:attribute-set! run-matrix "CLEARVALUE" "ALL") ;; NOTE: Was CONTENTS
		       (iup:attribute-set! run-matrix "CLEARATTRIB" "CONTENTS")
		       (iup:attribute-set! run-matrix "RESIZEMATRIX" "YES")
		       (iup:attribute-set! run-matrix "NUMCOL" max-col )

					   (set! changed #t)
					   (iup:attribute-set! run-matrix key name)
					   (iup:attribute-set! run-matrix "FITTOTEXT" (conc "C" num))))))
				 col-indices)
		       (if changed (iup:attribute-set! run-matrix "REDRAW" "ALL"))))))
    
    (set! dashboard:update-run-summary-tab updater)
    (d:data-runs-tree-set! ddata tb)
    (iup:split
     tb
     run-matrix)))

;; This is the New View tab
;; 
(define (dashboard:new-view db data ddata)
  (let* ((tb      (iup:treebox
		   #:value 0
		   #:name "Runs"
		   #:expand "YES"
		   #:addexpanded "NO"
		   #:selection-cb
		   (lambda (obj id state)
		     ;; (print "obj: " obj ", id: " id ", state: " state)
		     (let* ((run-path (tree:node->path obj id))
			    (run-id   (tree-path->run-id ddata (cdr run-path))))
		       (if (number? run-id)
			   (begin
			     (d:data-curr-run-id-set! ddata run-id)
			     (dashboard:update-new-view-tab))
			   (debug:print 0 "ERROR: tree-path->run-id returned non-number " run-id)))
		     ;; (print "path: " (tree:node->path obj id) " run-id: " run-id)
		     )))
	 (cell-lookup (make-hash-table))
	 (run-matrix (iup:matrix
		      #:expand "YES"
		      #:click-cb
		      (lambda (obj lin col status)
			(let* ((toolpath (car (argv)))
			       (key      (conc lin ":" col))
			       (test-id  (hash-table-ref/default cell-lookup key -1))
			       (cmd      (conc toolpath " -test " (d:data-curr-run-id ddata) "," test-id "&")))
			  (system cmd)))))
	 (updater  (lambda ()
		     (let* ((runs-dat     (if (d:alldat-useserver data)
					      (rmt:get-runs-by-patt (d:alldat-keys data) "%" #f #f #f #f)
					      (db:get-runs-by-patt db (d:alldat-keys data) "%" #f #f #f #f)))
			    (runs-header  (vector-ref runs-dat 0)) ;; 0 is header, 1 is list of records
			    (run-id       (d:data-curr-run-id ddata))
			    (last-update  0) ;; fix me



















			    (tests-dat    (dboard:get-tests-dat data run-id last-update))









			    (tests-mindat (dcommon:minimize-test-data tests-dat))
			    (indices      (common:sparse-list-generate-index tests-mindat)) ;;  proc: set-cell))
			    (row-indices  (cadr indices))
			    (col-indices  (car indices))
			    (max-row      (if (null? row-indices) 1 (common:max (map cadr row-indices))))
			    (max-col      (if (null? col-indices) 1 (common:max (map cadr col-indices))))
			    (max-visible  (max (- (d:alldat-num-tests data) 15) 3)) ;; (d:alldat-num-tests data) is proportional to the size of the window
			    (numrows      1)
			    (numcols      1)
			    (changed      #f)
			    (runs-hash    (let ((ht (make-hash-table)))
					    (for-each (lambda (run)
							(hash-table-set! ht (db:get-value-by-header run runs-header "id") run))
						      (vector-ref runs-dat 1))

		       
		       ;; (iup:attribute-set! tb "VALUE" "0")
		       ;; (iup:attribute-set! tb "NAME" "Runs")
		       ;; Update the runs tree
		       (for-each (lambda (run-id)
				   (let* ((run-record (hash-table-ref/default runs-hash run-id #f))
					  (key-vals   (map (lambda (key)(db:get-value-by-header run-record runs-header key))
							   (d:alldat-keys data)))
					  (run-name   (db:get-value-by-header run-record runs-header "runname"))
					  (col-name   (conc (string-intersperse key-vals "\n") "\n" run-name))
					  (run-path   (append key-vals (list run-name)))
					  (existing   (tree:find-node tb run-path)))
				     (if (not (hash-table-ref/default (d:data-path-run-ids ddata) run-path #f))
					 (begin
					   (hash-table-set! (d:data-run-keys ddata) run-id run-path)
					   ;; (iup:attribute-set! (dboard:data-get-runs-matrix *data*)
					   ;;    		 (conc rownum ":" colnum) col-name)
					   ;; (hash-table-set! runid-to-col run-id (list colnum run-record))
					   ;; Here we update the tests treebox and tree keys
					   (tree:add-node tb "Runs" run-path ;; (append key-vals (list run-name))
							  userdata: (conc "run-id: " run-id))
					   (hash-table-set! (d:data-path-run-ids ddata) run-path run-id)
					   ;; (set! colnum (+ colnum 1))
					   ))))
				 run-ids)
		       (iup:attribute-set! run-matrix "CLEARVALUE" "ALL") ;; NOTE: Was CONTENTS
		       (iup:attribute-set! run-matrix "CLEARATTRIB" "CONTENTS")
		       (iup:attribute-set! run-matrix "RESIZEMATRIX" "YES")
		       (iup:attribute-set! run-matrix "NUMCOL" max-col )

					 (begin
					   (set! changed #t)
					   (iup:attribute-set! run-matrix key name)
					   (iup:attribute-set! run-matrix "FITTOTEXT" (conc "C" num))))))
				 col-indices)
		       (if changed (iup:attribute-set! run-matrix "REDRAW" "ALL"))))))
    
    (set! dashboard:update-new-view-tab updater)
    (d:data-runs-tree-set! ddata tb)
    (iup:split
     tb
     run-matrix)))

;;======================================================================
;; R U N S 
;;======================================================================







(define (dboard:make-controls data)







	  (iup:hbox
	   (iup:vbox
	    (iup:frame 
	     #:title "filter test and items"
	     (iup:hbox
	      (iup:textbox #:size "120x15" #:fontsize "10" #:value "%"
			   #:action (lambda (obj unk val)

		;; (set! *tests-sort-reverse* *tests-sort-reverse*0)
		lb)
	      ;; (iup:button "Sort -t"   #:action (lambda (obj)
	      ;;   				 (next-sort-option)
	      ;;   				 (iup:attribute-set! obj "TITLE" (vector-ref (vector-ref *tests-sort-options* *tests-sort-reverse*) 0))
	      ;;   				 (mark-for-update)))
	      (iup:button "HideEmpty" #:action (lambda (obj)
						 (d:alldat-hide-empty-runs-set! data (not (d:alldat-hide-empty-runs data)))
						 (iup:attribute-set! obj "TITLE" (if (d:alldat-hide-empty-runs data) "+HideE" "-HideE"))
						 (mark-for-update)))
	      (let ((hideit (iup:button "HideTests" #:action (lambda (obj)
							       (d:alldat-hide-not-hide-set! data (not (d:alldat-hide-not-hide data)))
							       (iup:attribute-set! obj "TITLE" (if (d:alldat-hide-not-hide data) "HideTests" "NotHide"))
							       (mark-for-update)))))
		(d:alldat-hide-not-hide-button-set! data hideit) ;; never used, can eliminate ...
		hideit))
	     (iup:hbox
	      (iup:button "Quit"      #:action (lambda (obj)
						 ;; (if (d:alldat-dblocal data) (db:close-all (d:alldat-dblocal data)))
						 (exit)))
	      (iup:button "Refresh"   #:action (lambda (obj)
						 (mark-for-update)))
	      (iup:button "Collapse"  #:action (lambda (obj)
						 (let ((myname (iup:attribute obj "TITLE")))
						   (if (equal? myname "Collapse")
						       (begin
							 (for-each (lambda (tname)
								     (hash-table-set! *collapsed* tname #t))
								   (d:alldat-item-test-names data))
							 (iup:attribute-set! obj "TITLE" "Expand"))
						       (begin
							 (for-each (lambda (tname)
								     (hash-table-delete! *collapsed* tname))
								   (hash-table-keys *collapsed*))
							 (iup:attribute-set! obj "TITLE" "Collapse"))))
						 (mark-for-update))))))
	   (iup:frame 
	    #:title "state/status filter"
	    (iup:vbox
	     (apply 
	      iup:hbox
	      (map (lambda (status)
		     (iup:toggle status  #:action   (lambda (obj val)
						      (mark-for-update)
						      (if (eq? val 1)
							  (hash-table-set! (d:alldat-status-ignore-hash data) status #t)
							  (hash-table-delete! (d:alldat-status-ignore-hash data) status))
						      (set-bg-on-filter))))
		   (map cadr *common:std-statuses*))) ;; '("PASS" "FAIL" "WARN" "CHECK" "WAIVED" "STUCK/DEAD" "n/a" "SKIP")))
	     (apply 
	      iup:hbox
	      (map (lambda (state)
		     (iup:toggle state   #:action   (lambda (obj val)
						      (mark-for-update)
						      (if (eq? val 1)
							  (hash-table-set! (d:alldat-state-ignore-hash data) state #t)
							  (hash-table-delete! (d:alldat-state-ignore-hash data) state))
						      (set-bg-on-filter))))
		   (map cadr *common:std-states*))) ;; '("RUNNING" "COMPLETED" "INCOMPLETE" "LAUNCHED" "NOT_STARTED" "KILLED" "DELETED")))
	     (iup:valuator #:valuechanged_cb (lambda (obj)
					       (let ((val (inexact->exact (round (/ (string->number (iup:attribute obj "VALUE")) 10))))
						     (oldmax   (string->number (iup:attribute obj "MAX")))
						     (maxruns  (d:alldat-tot-runs data)))
						 (d:alldat-start-run-offset-set! data val)
						 (mark-for-update)
						 (debug:print 6 "(d:alldat-start-run-offset data) " (d:alldat-start-run-offset data) " maxruns: " maxruns ", val: " val " oldmax: " oldmax)
						 (iup:attribute-set! obj "MAX" (* maxruns 10))))
			   #:expand "HORIZONTAL"
			   #:max (* 10 (length (d:alldat-allruns data)))
			   #:min 0
			   #:step 0.01)))
					;(iup:button "inc rows" #:action (lambda (obj)(d:alldat-num-tests-set! data (+ (d:alldat-num-tests data) 1))))
					;(iup:button "dec rows" #:action (lambda (obj)(d:alldat-num-tests-set! data (if (> (d:alldat-num-tests data) 0)(- (d:alldat-num-tests data) 1) 0))))
	   ))

(define (make-dashboard-buttons data nruns ntests keynames runs-sum-dat new-view-dat)
  (let* ((db      (d:alldat-dblocal data))
	 (nkeys   (length keynames))
	 (runsvec (make-vector nruns))
	 (header  (make-vector nruns))
	 (lftcol  (make-vector ntests))
	 (keycol  (make-vector ntests))
	 (controls '())
	 (lftlst  '())
	 (hdrlst  '())
	 (bdylst  '())
	 (result  '())
	 (i       0))
    ;; controls (along bottom)
    (set! controls (dboard:make-controls data))
    
    ;; create the left most column for the run key names and the test names 
    (set! lftlst (list (iup:hbox
			(iup:label) ;; (iup:valuator)
			(apply iup:vbox 
			       (map (lambda (x)		
				      (let ((res (iup:hbox #:expand "HORIZONTAL"

       ((>= testnum ntests)
	;; now lftlst will be an hbox with the test keys and the test name labels
	(set! lftlst (append lftlst (list (iup:hbox  #:expand "HORIZONTAL"
						     (iup:valuator #:valuechanged_cb (lambda (obj)
										       (let ((val (string->number (iup:attribute obj "VALUE")))
											     (oldmax  (string->number (iup:attribute obj "MAX")))
											     (newmax  (* 10 (length *alltestnamelst*))))
											 (d:alldat-please-update-set! data #t)
											 (d:alldat-start-test-offset-set! *alldat* (inexact->exact (round (/ val 10))))
											 (debug:print 6 "(d:alldat-start-test-offset *alldat*) " (d:alldat-start-test-offset *alldat*) " val: " val " newmax: " newmax " oldmax: " oldmax)
											 (if (< val 10)
											     (iup:attribute-set! obj "MAX" newmax))
											 ))
								   #:expand "VERTICAL" 
								   #:orientation "VERTICAL"

			 (apply iup:hbox 
				(cons (apply iup:vbox lftlst)
				      (list 
				       (iup:vbox
					;; the header
					(apply iup:hbox (reverse hdrlst))
					(apply iup:hbox (reverse bdylst))))))
			 ;; controls
			 ))
	     ;; (data (d:data-init (make-d:data)))
	     (tabs (iup:tabs
		    #:tabchangepos-cb (lambda (obj curr prev)
					(d:alldat-please-update-set! *alldat* #t)
					(d:alldat-curr-tab-num-set! *alldat* curr))
		    (dashboard:summary *alldat*)
		    runs-view
		    (dashboard:one-run db  data runs-sum-dat)
		    (dashboard:new-view db data new-view-dat)
		    (dashboard:run-controls)
		    )))
	;; (set! (iup:callback tabs tabchange-cb:) (lambda (a b c)(print "SWITCHED TO TAB: " a " " b " " c)))
	(iup:attribute-set! tabs "TABTITLE0" "Summary")
	(iup:attribute-set! tabs "TABTITLE1" "Runs")
	(iup:attribute-set! tabs "TABTITLE2" "Run Summary")
	(iup:attribute-set! tabs "TABTITLE3" "New View")
	(iup:attribute-set! tabs "TABTITLE4" "Run Control")
	(iup:attribute-set! tabs "BGCOLOR" "190 190 190")
	(d:alldat-hide-not-hide-tabs-set! *alldat* tabs)
	(iup:vbox
	 tabs
	 controls))))
    (vector keycol lftcol header runsvec)))

(if (or (args:get-arg "-rows")
	(get-environment-variable "DASHBOARDROWS" ))
    (begin
      (d:alldat-num-tests-set! *alldat* (string->number
					 (or (args:get-arg "-rows")
					     (get-environment-variable "DASHBOARDROWS"))))
      (update-rundat *alldat* "%" (d:alldat-numruns *alldat*) "%/%" '()))
    (d:alldat-num-tests-set! *alldat* (min (max (update-rundat *alldat* "%" (d:alldat-numruns *alldat*) "%/%" '()) 8) 20)))

(define *tim* (iup:timer))
(define *ord* #f)
(iup:attribute-set! *tim* "TIME" 300)
(iup:attribute-set! *tim* "RUN" "YES")

;; Move this stuff to db.scm? I'm not sure that is the right thing to do...

	  (if dashboard:update-servers-table (dashboard:update-servers-table))))
    (if recalc
	(begin	
	  (case (d:alldat-curr-tab-num *alldat*) 
	    ((0) 
	     (if dashboard:update-summary-tab (dashboard:update-summary-tab)))
	    ((1) ;; The runs table is active
	     (update-rundat *alldat* (hash-table-ref/default (d:alldat-searchpatts *alldat*) "runname" "%") (d:alldat-numruns *alldat*)
			    (hash-table-ref/default (d:alldat-searchpatts *alldat*) "test-name" "%/%")
			    ;; (hash-table-ref/default (d:alldat-searchpatts *alldat*) "item-name" "%")
			    (let ((res '()))
			      (for-each (lambda (key)
					  (if (not (equal? key "runname"))
					      (let ((val (hash-table-ref/default (d:alldat-searchpatts *alldat*) key #f)))
						(if val (set! res (cons (list key val) res))))))
					(d:alldat-dbkeys *alldat*))
			      res))
	     (update-buttons uidat (d:alldat-numruns *alldat*) (d:alldat-num-tests *alldat*)))
	    ((2)
	     (dashboard:update-run-summary-tab))
	    ((3)
	     (dashboard:update-new-view-tab))
	    (else
	     (let ((updater (hash-table-ref/default (d:alldat-updaters *alldat*)
						    (d:alldat-curr-tab-num *alldat*) #f)))
	       (if updater (updater)))))
	  (d:alldat-please-update-set! *alldat* #f)
	  (d:alldat-last-db-update-set! *alldat* modtime)
	  (set! *last-recalc-ended-time* (current-milliseconds))))))

;;======================================================================
;; The heavy lifting starts here
;;======================================================================

;; ease debugging by loading ~/.dashboardrc
(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.dashboardrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

(define (main)
  (common:exit-on-version-changed)
  (let* ((runs-sum-dat (d:data-init (make-d:data))) ;; data for run-summary tab
	 (new-view-dat (d:data-init (make-d:data)))
	 (data         *alldat*))
    (cond 
     ((args:get-arg "-run")
      (let ((runid (string->number (args:get-arg "-run"))))
	(if runid
	    (begin
	      (lambda (x)
		(on-exit std-exit-procedure)
		(examine-run (d:alldat-dblocal data) runid)))
	    (begin
	      (print "ERROR: runid is not a number " (args:get-arg "-run"))
	      (exit 1)))))
     ((args:get-arg "-test") ;; run-id,test-id
      (let* ((dat     (let ((d (map string->number (string-split (args:get-arg "-test") ","))))
			(if (> (length d) 1)
			    d
			    (list #f #f))))
	     (run-id  (car dat))
	     (test-id (cadr dat)))
	(if (and (number? run-id)
		 (number? test-id)
		 (>= test-id 0))
	    (examine-test run-id test-id)
	    (begin
	      (debug:print 3 "INFO: tried to open test with invalid run-id,test-id. " (args:get-arg "-test"))
	      (exit 1)))))
     ((args:get-arg "-guimonitor")
      (gui-monitor (d:alldat-dblocal data)))
     (else
      (set! uidat (make-dashboard-buttons data ;; (d:alldat-dblocal data)
					  (d:alldat-numruns data)
					  (d:alldat-num-tests data)
					  (d:alldat-dbkeys data)
					  runs-sum-dat new-view-dat))
      (iup:callback-set! *tim*
			 "ACTION_CB"
			 (lambda (x)
			   (let ((update-is-running #f))
			     (mutex-lock! (d:alldat-update-mutex data))
			     (set! update-is-running (d:alldat-updating data))
			     (if (not update-is-running)
				 (d:alldat-updating-set! data #t))
			     (mutex-unlock! (d:alldat-update-mutex data))
			     (if (not update-is-running)
				 (begin
				   (dashboard:run-update x)
				   (mutex-lock! (d:alldat-update-mutex data))
				   (d:alldat-updating-set! data #f)
				   (mutex-unlock! (d:alldat-update-mutex data)))))
			   1))))
    
    (let ((th1 (make-thread (lambda ()
			      (thread-sleep! 1)
			      (d:alldat-please-update-set! data #t)
			      (dashboard:run-update 1)) "update buttons once"))
	  (th2 (make-thread iup:main-loop "Main loop")))
      (thread-start! th1)
      (thread-start! th2)
      (thread-join! th2))))

(main)

[settings]
base-dir      /tmp/delme_data
allowed-users matt
allowed-chars [0-9a-zA-Z\-\.]+
allowed-sub-paths [0-9a-zA-Z\-\.]+
[database]
location #{scheme (create-directory "/tmp/#{getenv USER}" #t)}

                               END;")
		     )
		   (begin
		     ;; NB// must sync first to ensure deleted tests get marked as such in megatest.db
		     (db:sync-tables db:sync-tests-only (db:get-db fromdb run-id) mtdb)
		     (db:clean-up-rundb (db:get-db fromdb run-id))
		     ;;
		     ;; Feb 18, 2016: add field last_update to tests, test_steps and test_data
		     ;;
		     ;; remove this some time after September 2016 (added in version v1.6031
		     ;;
		     (for-each
		      (lambda (table-name)
			(handle-exceptions
			 exn
			 (if (string-match ".*duplicate.*" ((condition-property-accessor 'exn 'message) exn))
			     (debug:print 0 "Column last_update already added to " table-name " table")
			     (db:general-sqlite-error-dump exn "alter table " table-name " ..." #f "none"))
			 (sqlite3:execute
			  frundb
			  (conc "ALTER TABLE " table-name " ADD COLUMN last_update INTEGER DEFAULT 0")))
			(sqlite3:execute
			 frundb
			 (conc "DROP TRIGGER IF EXISTS update_" table-name "_trigger;"))
			(sqlite3:execute
			 frundb
			 (conc "CREATE TRIGGER IF NOT EXISTS update_" table-name "_trigger AFTER UPDATE ON " table-name "
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE " table-name " SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;"))
			)
		      '("tests" "test_steps" "test_data"))))))
	   all-run-ids)
	  ;; removed deleted runs
	  (let ((dbdir (tasks:get-task-db-path)))
	    (for-each (lambda (run-id)
			(let ((fullname (conc dbdir "/" run-id ".db")))
			  (if (file-exists? fullname)
			      (begin

       ;; (sqlite3:execute db "CREATE VIEW runs_tests AS SELECT * FROM runs INNER JOIN tests ON runs.id=tests.run_id;")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS extradat (id INTEGER PRIMARY KEY, run_id INTEGER, key TEXT, val TEXT);")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS metadat (id INTEGER PRIMARY KEY, var TEXT, val TEXT,
                                  CONSTRAINT metadat_constraint UNIQUE (var));")
       (sqlite3:execute db "CREATE TABLE IF NOT EXISTS access_log (id INTEGER PRIMARY KEY, user TEXT, accessed TIMESTAMP, args TEXT);")
       ;; Must do this *after* running patch db !! No more. 
       ;; cannot use db:set-var since it will deadlock, hardwire the code here
       (sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" "MEGATEST_VERSION" (common:version-signature))
       (debug:print-info 11 "db:initialize END")))))

;;======================================================================
;; R U N   S P E C I F I C   D B 
;;======================================================================

(define (db:initialize-run-id-db db)

                               test_id INTEGER, 
                               stepname TEXT, 
                               state TEXT DEFAULT 'NOT_STARTED', 
                               status TEXT DEFAULT 'n/a',
                               event_time TIMESTAMP,
                               comment TEXT DEFAULT '',
                               logfile TEXT DEFAULT '',
                               last_update  INTEGER DEFAULT (strftime('%s','now')),
                               CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state));")
     (sqlite3:execute db "CREATE INDEX IF NOT EXISTS teststeps_index ON tests (run_id, testname, item_path);")
     (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_teststeps_trigger AFTER UPDATE ON test_steps

                             FOR EACH ROW
                               BEGIN 
                                 UPDATE test_steps SET last_update=(strftime('%s','now'))



                                   WHERE id=old.id;
                               END;")

     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_data (id INTEGER PRIMARY KEY,
                                test_id INTEGER,
                                category TEXT DEFAULT '',
                                variable TEXT,
	                        value REAL,
	                        expected REAL,
	                        tol REAL,
                                units TEXT,
                                comment TEXT DEFAULT '',
                                status TEXT DEFAULT 'n/a',
                                type TEXT DEFAULT '',
                                last_update  INTEGER DEFAULT (strftime('%s','now')),
                              CONSTRAINT test_data_constraint UNIQUE (test_id,category,variable));")

     (sqlite3:execute db "CREATE INDEX IF NOT EXISTS test_data_index ON test_data (test_id);")
     (sqlite3:execute db "CREATE TRIGGER  IF NOT EXISTS update_test_data_trigger AFTER UPDATE ON test_data
                             FOR EACH ROW
                               BEGIN 
                                 UPDATE test_data SET last_update=(strftime('%s','now'))
                                   WHERE id=old.id;
                               END;")
     (sqlite3:execute db "CREATE TABLE IF NOT EXISTS test_rundat (
                              id           INTEGER PRIMARY KEY,
                              test_id      INTEGER,
                              update_time  TIMESTAMP,
                              cpuload      INTEGER DEFAULT -1,
                              diskfree     INTEGER DEFAULT -1,
                              diskusage    INTGER DEFAULT -1,

;;======================================================================
;; M E T A   G E T   A N D   S E T   V A R S
;;======================================================================

;; returns number if string->number is successful, string otherwise
;; also updates *global-delta*
;;


(define (db:get-var dbstruct var)
  (let* ((res      #f)
	 (dbdat    (db:get-db dbstruct #f))
	 (db       (db:dbdat-get-db dbdat)))

    (sqlite3:for-each-row
     (lambda (val)
       (set! res val))
     db
     "SELECT val FROM metadat WHERE var=?;" var)
    ;; convert to number if can
    (if (string? res)
	(let ((valnum (string->number res)))
	  (if valnum (set! res valnum))))
    res))

;; This was part of db:get-var. It was used to estimate the load on
;; the database files.
;;
;; scale by 10, average with current value.
;;     (set! *global-delta* (/ (+ *global-delta* (* (- (current-milliseconds) start-ms)
;; 						 (if throttle throttle 0.01)))
;; 			    2))
;;     (if (> (abs (- *last-global-delta-printed* *global-delta*)) 0.08) ;; don't print all the time, only if it changes a bit
;; 	(begin
;; 	  (debug:print-info 4 "launch throttle factor=" *global-delta*)
;; 	  (set! *last-global-delta-printed* *global-delta*)))


(define (db:set-var dbstruct var val)
  (let* ((dbdat (db:get-db dbstruct #f))
	 (db    (db:dbdat-get-db dbdat)))
    (sqlite3:execute db "INSERT OR REPLACE INTO metadat (var,val) VALUES (?,?);" var val)))

(define (db:del-var dbstruct var)

  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)
     (let* ((res '()))
       (sqlite3:for-each-row 
	(lambda (id test-id stepname state status event-time logfile comment)
	  (set! res (cons (vector id test-id stepname state status event-time (if (string? logfile) logfile "") comment) res)))
	db
	"SELECT id,test_id,stepname,state,status,event_time,logfile,comment FROM test_steps WHERE status != 'DELETED' AND test_id=? ORDER BY id ASC;" ;; event_time DESC,id ASC;
	test-id)
       (reverse res)))))

(define (db:get-steps-data dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id

             (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'pass') AS pass_count;"
     test-id test-id)
    ;; Now rollup the counts to the central megatest.db
    (db:general-call dbdat 'pass-fail-counts (list pass-count fail-count test-id))
    ;; if the test is not FAIL then set status based on the fail and pass counts.
    (db:general-call dbdat 'test_data-pf-rollup (list test-id test-id test-id test-id))))

;; each section is a rule except "final" which is the final result
;;
;; [rule-5]
;; operator in
;; section LogFileBody
;; desc Output voltage
;; status OK
;; expected 1.9
;; measured 1.8
;; type +/-
;; tolerance 0.1
;; pass 1
;; fail 0
;; 
;; [final]
;; exit-code 6
;; exit-status SKIP
;; message If flagged we are asking for this to exit with code 6
;;
;; recorded in steps table:
;;   category: stepname
;;   variable: rule-N
;;   value:    measured
;;   expected: expected
;;   tol:      tolerance
;;   units:    -
;;   comment:  desc or message
;;   status:   status
;;   type:     type
;; 
(define (db:logpro-dat->csv dat stepname)
  (let ((res '()))
    (for-each
     (lambda (entry-name)
       (if (equal? entry-name "final")
	   (set! res (append 
		      res
		      (list
		       (list stepname
			     entry-name
			     (configf:lookup dat entry-name "exit-code")    ;; 0 ;; Value
			     0                                              ;; 1 ;; Expected
			     0                                              ;; 2 ;; Tolerance
			     "n/a"					    ;; 3 ;; Units
			     (configf:lookup dat entry-name "message")      ;; 4 ;; Comment
			     (configf:lookup dat entry-name "exit-status")  ;; 5 ;; Status
			     "logpro"                                       ;; 6 ;; Type
			     ))))
	   (let* ((value     (or (configf:lookup dat entry-name "measured")  "n/a"))
		  (expected  (or (configf:lookup dat entry-name "expected")  "n/a"))
		  (tolerance (or (configf:lookup dat entry-name "tolerance") "n/a"))
		  (comment   (or (configf:lookup dat entry-name "comment")
				 (configf:lookup dat entry-name "desc")      "n/a"))
		  (status    (or (configf:lookup dat entry-name "status")    "n/a"))
		  (type      (or (configf:lookup dat entry-name "expected")  "n/a")))
	     (set! res (append
			res
			(list (list stepname entry-name expected tolerance comment status type)))))))
     (hash-table-keys dat))
    res))

;; $MT_MEGATEST -load-test-data << EOF
;; foo,bar,   1.2,  1.9, >
;; foo,rab, 1.0e9, 10e9, 1e9
;; foo,bla,   1.2,  1.9, <
;; foo,bal,   1.2,  1.2, <   ,     ,Check for overload
;; foo,alb,   1.2,  1.2, <=  , Amps,This is the high power circuit test
;; foo,abl,   1.2,  1.3, 0.1
;; foo,bra,   1.2, pass, silly stuff
;; faz,bar,    10,  8mA,     ,     ,"this is a comment"
;; EOF

(define (db:csv->test-data dbstruct run-id test-id csvdata)
  (debug:print 4 "test-id " test-id ", csvdata: " csvdata)
  (let* ((dbdat   (db:get-db dbstruct run-id))
	 (db      (db:dbdat-get-db dbdat))
	 (csvlist (csv->list (make-csv-reader
			      (open-input-string csvdata)
			      '((strip-leading-whitespace? #t)
				(strip-trailing-whitespace? #t)))))) ;; (csv->list csvdata)))
    (for-each
     (lambda (csvrow)
       (let* ((padded-row  (take (append csvrow (list #f #f #f #f #f #f #f #f #f)) 9))
	      (category    (list-ref padded-row 0))
	      (variable    (list-ref padded-row 1))
	      (value       (any->number-if-possible (list-ref padded-row 2)))
	      (expected    (any->number-if-possible (list-ref padded-row 3)))
	      (tol         (any->number-if-possible (list-ref padded-row 4))) ;; >, <, >=, <=, or a number

(define-inline (tdb:step-get-id              vec)    (vector-ref  vec 0))
(define-inline (tdb:step-get-test_id         vec)    (vector-ref  vec 1))
(define-inline (tdb:step-get-stepname        vec)    (vector-ref  vec 2))
(define-inline (tdb:step-get-state           vec)    (vector-ref  vec 3))
(define-inline (tdb:step-get-status          vec)    (vector-ref  vec 4))
(define-inline (tdb:step-get-event_time      vec)    (vector-ref  vec 5))
(define-inline (tdb:step-get-logfile         vec)    (vector-ref  vec 6))
(define-inline (tdb:step-get-comment         vec)    (vector-ref  vec 7))
(define-inline (tdb:step-set-id!             vec val)(vector-set! vec 0 val))
(define-inline (tdb:step-set-test_id!        vec val)(vector-set! vec 1 val))
(define-inline (tdb:step-set-stepname!       vec val)(vector-set! vec 2 val))
(define-inline (tdb:step-set-state!          vec val)(vector-set! vec 3 val))
(define-inline (tdb:step-set-status!         vec val)(vector-set! vec 4 val))
(define-inline (tdb:step-set-event_time!     vec val)(vector-set! vec 5 val))
(define-inline (tdb:step-set-logfile!        vec val)(vector-set! vec 6 val))
(define-inline (tdb:step-set-comment!        vec vak)(vector-set! vec 7 val))


;; The steps table
(define (make-db:steps-table)(make-vector 5))
(define-inline (tdb:steps-table-get-stepname   vec)    (vector-ref  vec 0))
(define-inline (tdb:steps-table-get-start      vec)    (vector-ref  vec 1))
(define-inline (tdb:steps-table-get-end        vec)    (vector-ref  vec 2))

		      (cdr tal))))))))

;;======================================================================
;;  S T E P S
;;======================================================================

(define (dcommon:populate-steps teststeps steps-matrix)
  (let ((max-row 0)
	(max-col 7))
    (if (null? teststeps)
	(iup:attribute-set! steps-matrix "CLEARVALUE" "CONTENTS")
	(let loop ((hed    (car teststeps))
		   (tal    (cdr teststeps))
		   (rownum 1)
		   (colnum 1))
	  (if (> rownum max-row)(set! max-row rownum))
	  (let ((val     (vector-ref hed (- colnum 1)))
		(mtrx-rc (conc rownum ":" colnum)))
	    (iup:attribute-set! steps-matrix  mtrx-rc (if val (conc val) ""))
	    (if (< colnum max-col)
		(loop hed tal rownum (+ colnum 1))
		(if (not (null? tal))
		    (loop (car tal)(cdr tal)(+ rownum 1) 1))))))
    (if (> max-row 0)
	(begin
	  ;; we are going to speculatively clear rows until we find a row that is already cleared
	  (let loop ((rownum  (+ max-row 1))
		     (colnum  0)
		     (deleted #f))
	    ;; (debug:print-info 0 "cleaning " rownum ":" colnum)
	    (let* ((next-row (if (eq? colnum max-col) (+ rownum 1) rownum))
		   (next-col (if (eq? colnum max-col) 1 (+ colnum 1)))
		   (mtrx-rc  (conc rownum ":" colnum))
		   (curr-val (iup:attribute steps-matrix mtrx-rc)))
	      ;; (debug:print-info 0 "cleaning " rownum ":" colnum " currval= " curr-val)
	      (if (and (string? curr-val)
		       (not (equal? curr-val "")))
		  (begin
		    (iup:attribute-set! steps-matrix mtrx-rc "")
		    (loop next-row next-col #t))
		  (if (eq? colnum max-col) ;; not done, didn't get a full blank row
		      (if deleted (loop next-row next-col #f)) ;; exit on this not met
		      (loop next-row next-col deleted)))))
	  (iup:attribute-set! steps-matrix "REDRAW" "ALL")))))

(use srfi-19)
(use test)
(use format)
(use regex)
(declare (unit inteldate))
;; utility procedures to convert among
;; different ways to express date (inteldate, seconds since epoch, isodate)
;;
;; samples:
;; isodate   -> "2016-01-01"
;; inteldate -> "16ww01.5"
;; seconds   -> 1451631600

;; procedures provided:
;; ====================
;; seconds->isodate
;; seconds->inteldate
;;
;; isodate->seconds
;; isodate->inteldate
;;
;; inteldate->seconds
;; inteldate->isodate

;; srfi-19 used extensively; this doc is better tha the eggref:
;; http://srfi.schemers.org/srfi-19/srfi-19.html

;; Author: brandon.j.barclay@intel.com 16ww18.6

(define (date->seconds date)
  (inexact->exact
   (string->number
    (date->string date "~s"))))

(define (seconds->isodate seconds)
  (let* ((date (seconds->date seconds))
         (result (date->string date "~Y-~m-~d")))
    result))

(define (isodate->seconds isodate)
  "Takes a string input of the form 'YY-MM-DD' or 'YYYY-MM-DD' and returns epoch time; for YY, assume after Y2K"
  (let* ((numlist (map string->number (string-split isodate "-")))
        (raw-year (car numlist))
        (year (if (< raw-year 100) (+ raw-year 2000) raw-year))
        (month (list-ref numlist 1))
        (day (list-ref numlist 2))
        (date (make-date 0 0 0 0 day month year))
        (seconds (date->seconds date)))

    seconds))

;; adapted from perl Intel::WorkWeek perl module
;; intel year consists of numbered weeks starting from week 1
;;   week 1 is the week containing jan 1 of the year
;;   days of week are numbered starting from 0 on sunday
;;   intel year does not match calendar year in workweek 1
;;     before jan1.
(define (seconds->inteldate-values seconds)
  (define (date-difference->seconds d1 d2)
    (- (date->seconds d1) (date->seconds d2)))

  (let* ((thisdate (seconds->date seconds))
         (thisdow (string->number (date->string thisdate "~w")))

         (year (date-year thisdate))
         ;; intel workweek 1 begins on sunday of week containing jan1
         (jan1 (make-date 0 0 0 0 1 1 year))
         (jan1dow (date-week-day jan1))
         (ww01 (date-subtract-duration jan1 (seconds->time (* 60 60 24 jan1dow))))

         (ww01_delta_seconds (date-difference->seconds thisdate ww01))
         (wwnum_initial (inexact->exact (add1 (floor (/ ww01_delta_seconds 24 3600 7) ))))
         
         ;; we could be in ww1 of next year
         (this-saturday (seconds->date
                         (+ seconds
                            (* 60 60 24 (- 6 thisdow)))))
         (this-week-ends-next-year?
          (> (date-year this-saturday) year))
         (intelyear
          (if this-week-ends-next-year?
              (add1 year)
              year))
         (intelweek
          (if this-week-ends-next-year?
              1
              wwnum_initial)))
   (values intelyear intelweek thisdow)))

(define (seconds->inteldate seconds)
  (define (string-leftpad in width pad-char)
    (let* ((unpadded-str (->string in))
           (padlen_temp (- width (string-length unpadded-str)))
           (padlen (if (< padlen_temp 0) 0 padlen_temp))
           (padding
            (fold conc ""
                  (map (lambda (x) (->string pad-char)) (iota padlen)))))
      (conc padding unpadded-str)))
  (define (zeropad num width)
    (string-leftpad num width #:0))

  (let-values (((intelyear intelweek day-of-week-num)
                (seconds->inteldate-values seconds)))
    (let ((intelyear-str
           (zeropad
            (->string
             (if (> intelyear 1999)
                 (- intelyear 2000) intelyear))
            2))
          (intelweek-str
           (zeropad (->string intelweek) 2))
          (dow-str (->string day-of-week-num)))
      (conc intelyear-str "ww" intelweek-str "." dow-str))))

(define (isodate->inteldate isodate)
  (seconds->inteldate
   (isodate->seconds isodate)))

(define (inteldate->seconds inteldate)
  (let ((match (string-match "^(\\d+)ww(\\d+).(\\d)$" inteldate)))
    (if
     (not match)
     #f
     (let* (
            (intelyear-raw (string->number (list-ref match 1)))
            (intelyear (if (< intelyear-raw 100)
                           (+ intelyear-raw 2000)
                           intelyear-raw))
            (intelww (string->number (list-ref match 2)))
            (dayofweek (string->number (list-ref match 3)))

            (day-of-seconds (* 60 60 24 ))
            (week-of-seconds (* day-of-seconds 7))
            

            ;; get seconds at ww1.0
            (new-years-date (make-date 0 0 0 0 1 1 intelyear))
            (new-years-seconds
             (date->seconds new-years-date))
            (new-years-dayofweek (date-week-day new-years-date))
            (ww1.0_seconds (- new-years-seconds
                              (* day-of-seconds
                                 new-years-dayofweek)))
            (workweek-adjustment (* week-of-seconds (sub1 intelww)))
            (weekday-adjustment (* dayofweek day-of-seconds))

            (result (+ ww1.0_seconds workweek-adjustment weekday-adjustment)))
       result))))

(define (inteldate->isodate inteldate)
  (seconds->isodate (inteldate->seconds inteldate)))

(define (inteldate-tests)
  (test-group
   "date conversion tests"
   (let ((test-table
          '(("16ww01.5" . "2016-01-01")
            ("16ww18.5" . "2016-04-29")
            ("1999ww33.5" . "1999-08-13")
            ("16ww18.4" . "2016-04-28")
            ("16ww18.3" . "2016-04-27")
            ("13ww01.0" . "2012-12-30")
            ("13ww52.6" . "2013-12-28")
            ("16ww53.3" . "2016-12-28"))))
     (for-each
      (lambda (test-pair)
        (let ((inteldate (car test-pair))
              (isodate (cdr test-pair)))
          (test
           (conc "(isodate->inteldate "isodate ") => "inteldate)
           inteldate
           (isodate->inteldate isodate))
          
          (test
           (conc "(inteldate->isodate "inteldate ")   => "isodate)
           isodate
           (inteldate->isodate inteldate))))
      test-table))))

;(inteldate-tests)

;;  PURPOSE.

;;======================================================================
;; launch a task - this runs on the originating host, tests themselves
;;
;;======================================================================

(use regex regex-case base64 sqlite3 srfi-18 directory-utils posix-extras z3 call-with-environment-variables csv)
(use defstruct)

(import (prefix base64 base64:))
(import (prefix sqlite3 sqlite3:))

(declare (unit launch))
(declare (uses common))

  (let ((enccmd (if encoded-cmd encoded-cmd (getenv "MT_CMDINFO"))))
    (if enccmd
	(common:read-encoded-string enccmd)
	'())))

;;                       0           1              2              3
(defstruct launch:einf (pid #t)(exit-status #t)(exit-code #t)(rollup-status 0))

;; return (conc status ": " comment) from the final section so that
;;   the comment can be set in the step record in launch.scm
;;
(define (launch:load-logpro-dat run-id test-id stepname)
  (let ((cname (conc stepname ".dat")))
    (if (file-exists? cname)
	(let* ((dat  (read-config cname #f #f))
	       (csvr (db:logpro-dat->csv dat stepname))
	       (csvt (let-values (( (fmt-cell fmt-record fmt-csv) (make-format ",")))
				 (fmt-csv (map list->csv-record csvr))))
	       (status (configf:lookup dat "final" "exit-status"))
	       (msg     (configf:lookup dat "final" "message")))
	  (rmt:csv->test-data run-id test-id csvt)
	  (cond
	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig)
  (let* ((stepname       (car ezstep))  ;; do stuff to run the step
	 (stepinfo       (cadr ezstep))
	 (stepparts      (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
	 (stepparms      (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each 
	 (stepcmd        (list-ref stepparts 3))
	 (script         "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
	 (logpro-file    (conc stepname ".logpro"))
	 (html-file      (conc stepname ".html"))
	 (dat-file       (conc stepname ".dat"))
	 (tconfig-logpro (configf:lookup testconfig "logpro" stepname))
	 (logpro-used    (file-exists? logpro-file)))

    (if (and tconfig-logpro
	     (not logpro-used)) ;; no logpro file found but have a defn in the testconfig
	(begin
	  (with-output-to-file logpro-file

			(if (eq? pid-val 0)
			    (begin
			      (thread-sleep! 2)
			      (processloop (+ i 1)))))
	    (debug:print-info 0 "logpro for step " stepname " exited with code " (launch:einf-exit-code exit-info))))) ;; (vector-ref exit-info 2)))))
    
    (let ((exinfo (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
	  (logfna (if logpro-used (conc stepname ".html") ""))
	  (comment #f))
      (if logpro-used
	  (let ((datfile (conc stepname ".dat")))
	    ;; load the .dat file into the test_data table if it exists
	    (if (file-exists? datfile)
		(set! comment (launch:load-logpro-dat run-id test-id stepname)))
	    (rmt:test-set-log! run-id test-id (conc stepname ".html"))))
      (rmt:teststep-set-status! run-id test-id stepname "end" exinfo comment logfna))
    ;; set the test final status
    (let* ((process-exit-status (launch:einf-exit-code exit-info)) ;; (vector-ref exit-info 2))
	   (this-step-status (cond
			      ((and (eq? process-exit-status 2) logpro-used) 'warn)   ;; logpro 2 = warnings
			      ((and (eq? process-exit-status 3) logpro-used) 'check)  ;; logpro 3 = check
			      ((and (eq? process-exit-status 4) logpro-used) 'waived) ;; logpro 4 = waived
			      ((and (eq? process-exit-status 5) logpro-used) 'abort)  ;; logpro 5 = abort

	 (tests:test-set-status! run-id test-id next-state "PASS" #f #f))
	(else ;; 'fail
	 (launch:einf-rollup-status-set! exit-info 1) ;; (vector-set! exit-info 3 1) ;; force fail, this used to be next-state but that doesn't make sense. should always be "COMPLETED" 
	 (tests:test-set-status! run-id test-id "COMPLETED" "FAIL" (conc "Failed at step " stepname) #f)
	 )))
    logpro-used))

(define (launch:manage-steps run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m)
  ;; (let-values
  ;;  (((pid exit-status exit-code)
  ;;    (run-n-wait fullrunscript)))
  ;; (tests:test-set-status! test-id "RUNNING" "n/a" #f #f)
  ;; Since we should have a clean slate at this time there is no need to do 
  ;; any of the other stuff that tests:test-set-status! does. Let's just 
  ;; force RUNNING/n/a

  ;; (thread-sleep! 0.3)
  (tests:test-force-state-status! run-id test-id "RUNNING" "n/a")
  (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "RUNNING")
  ;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here

  ;; if there is a runscript do it first
  (if fullrunscript
      (let ((pid (process-run fullrunscript)))
	(rmt:test-set-top-process-pid run-id test-id pid)
	(let loop ((i 0))
	  (let-values
	   (((pid-val exit-status exit-code) (process-wait pid #t)))
	   (mutex-lock! m)
	   (launch:einf-pid-set!           exit-info  pid)         ;; (vector-set! exit-info 0 pid)
	   (launch:einf-exit-status-set!   exit-info  exit-status) ;; (vector-set! exit-info 1 exit-status)
	   (launch:einf-exit-code-set!     exit-info  exit-code)   ;; (vector-set! exit-info 2 exit-code)
	   (launch:einf-rollup-status-set! exit-info  exit-code)   ;; (vector-set! exit-info 3 exit-code)  ;; rollup status
	   (mutex-unlock! m)
	   (if (eq? pid-val 0)
	       (begin
		 (thread-sleep! 2)
		 (loop (+ i 1)))
	       )))))
  ;; then, if runscript ran ok (or did not get called)
  ;; do all the ezsteps (if any)
  (if ezsteps
      (let* ((testconfig ;; (read-config (conc work-area "/testconfig") #f #t environ-patt: "pre-launch-env-vars")) ;; FIXME??? is allow-system ok here?
	      ;; NOTE: it is tempting to turn off force-create of testconfig but dynamic
	      ;;       ezstep names need a full re-eval here.
	      (tests:get-testconfig test-name tconfigreg #t force-create: #t)) ;; 'return-procs)))
	     (ezstepslst (if (hash-table? testconfig)
			     (hash-table-ref/default testconfig "ezsteps" '())
			     #f)))
	(if testconfig
	    (hash-table-set! *testconfigs* test-name testconfig) ;; cached for lazy reads later ...
	    (begin
	      (launch:setup)
	      (debug:print 0 "WARNING: no testconfig found for " test-name " in search path:\n  "
			   (string-intersperse (tests:get-tests-search-path *configdat*) "\n  "))))
	;; after all that, still no testconfig? Time to abort
	(if (not testconfig)
	    (begin
	      (debug:print 0 "ERROR: Failed to resolve megatest.config, runconfigs.config and testconfig issues. Giving up now")
	      (exit 1)))
	(if (not (file-exists? ".ezsteps"))(create-directory ".ezsteps"))
	;; if ezsteps was defined then we are sure to have at least one step but check anyway
	(if (not (> (length ezstepslst) 0))
	    (debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
	    (let loop ((ezstep (car ezstepslst))
		       (tal    (cdr ezstepslst))
		       (prevstep #f))
	      ;; check exit-info (vector-ref exit-info 1)
	      (if (launch:einf-exit-status exit-info) ;; (vector-ref exit-info 1)
		  (let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig))
			(stepname    (car ezstep)))
		    ;; if logpro-used read in the stepname.dat file
		    (if (and logpro-used (file-exists? (conc stepname ".dat")))
			(launch:load-logpro-dat run-id test-id stepname))
		    (if (steprun-good? logpro-used (launch:einf-exit-code exit-info))
			(if (not (null? tal))
			    (loop (car tal) (cdr tal) stepname))
			(debug:print 4 "WARNING: step " (car ezstep) " failed. Stopping")))
		  (debug:print 4 "WARNING: a prior step failed, stopping at " ezstep)))))))

(define (launch:monitor-job run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)
  (let* ((start-seconds (current-seconds))
	 (calc-minutes  (lambda ()
			  (inexact->exact 
			   (round 
			    (- 
			     (current-seconds) 
			     start-seconds)))))
	 (kill-tries 0))
    ;; (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area)
    ;; (tests:set-full-meta-info test-id run-id (calc-minutes) work-area)
    (tests:set-full-meta-info #f test-id run-id (calc-minutes) work-area 10)
    (let loop ((minutes   (calc-minutes))
	       (cpu-load  (get-cpu-load))
	       (disk-free (get-df (current-directory))))
      (let ((new-cpu-load (let* ((load  (get-cpu-load))
				 (delta (abs (- load cpu-load))))
			    (if (> delta 0.6) ;; don't bother updating with small changes
				load
				#f)))
	    (new-disk-free (let* ((df    (get-df (current-directory)))
				  (delta (abs (- df disk-free))))
			     (if (> delta 200) ;; ignore changes under 200 Meg
				 df
				 #f))))
	(set! kill-job? (or (test-get-kill-request run-id test-id) ;; run-id test-name itemdat))
			    (and runtlim (let* ((run-seconds   (- (current-seconds) start-seconds))
						(time-exceeded (> run-seconds runtlim)))
					   (if time-exceeded
					       (begin
						 (debug:print-info 0 "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" run-seconds " seconds, limit=" runtlim)
						 #t)
					       #f)))))
	(tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
	(if kill-job? 
	    (begin
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second
	      ;;       between tries?
	      (let* ((pid1 (launch:einf-pid exit-info)) ;; (vector-ref exit-info 0))
		     (pid2 (rmt:test-get-top-process-pid run-id test-id))
		     (pids (delete-duplicates (filter number? (list pid1 pid2)))))
		(if (not (null? pids))
		    (begin
		      (for-each
		       (lambda (pid)
			 (handle-exceptions
			  exn
			  (begin
			    (debug:print-info 0 "Unable to kill process with pid " pid ", possibly already killed.")
			    (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn)))
			  (debug:print 0 "WARNING: Request received to kill job " pid) ;;  " (attempt # " kill-tries ")")
			  (debug:print-info 0 "Signal mask=" (signal-mask))
			  ;; (if (process:alive? pid)
			  ;;     (begin
			  (map (lambda (pid-num)
				 (process-signal pid-num signal/term))
			       (process:get-sub-pids pid))
			  (thread-sleep! 5)
			  ;; (if (process:process-alive? pid)
			  (map (lambda (pid-num)
				 (handle-exceptions
				  exn
				  #f
				  (process-signal pid-num signal/kill)))
			       (process:get-sub-pids pid))))
		       ;;    (debug:print-info 0 "not killing process " pid " as it is not alive"))))
		       pids)
		      (tests:test-set-status! run-id test-id "KILLED"  "KILLED" (args:get-arg "-m") #f))
		    (begin
		      (debug:print 0 "ERROR: Nothing to kill, pid1=" pid1 ", pid2=" pid2)
		      (tests:test-set-status! run-id test-id "KILLED"  "FAILED TO KILL" (args:get-arg "-m") #f)
		      )))
	      (mutex-unlock! m)
	      ;; no point in sticking around. Exit now.
	      (exit)))
	(if (hash-table-ref/default misc-flags 'keep-going #f)
	    (begin
	      (thread-sleep! 3) ;; (+ 3 (random 6))) ;; add some jitter to the call home time to spread out the db accesses
	      (if (hash-table-ref/default misc-flags 'keep-going #f)  ;; keep originals for cpu-load and disk-free unless they change more than the allowed delta
		  (loop (calc-minutes) (or new-cpu-load cpu-load) (or new-disk-free disk-free)))))))
    (tests:update-central-meta-info run-id test-id (get-cpu-load) (get-df (current-directory))(calc-minutes) #f #f))) ;; NOTE: Checking twice for keep-going is intentional

(define (launch:execute encoded-cmd)
     (let* ((cmdinfo    (common:read-encoded-string encoded-cmd))
	  (tconfigreg (tests:get-all)))
    (setenv "MT_CMDINFO" encoded-cmd)
    (if (list? cmdinfo) ;; ((testpath /tmp/mrwellan/jazzmind/src/example_run/tests/sqlitespeed)
	;; (test-name sqlitespeed) (runscript runscript.rb) (db-host localhost) (run-id 1))
	(let* ((testpath  (assoc/default 'testpath  cmdinfo))  ;; testpath is the test spec area
	       (top-path  (assoc/default 'toppath   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))  ;; work-area is the test run area

                                  (if (substring-index "/" runscript)
                                      runscript ;; use unadultered if contains slashes
                                      (let ((fulln (conc testpath "/" runscript)))
	                                  (if (and (file-exists? fulln)
                                                   (file-execute-access? fulln))
                                              fulln
                                              runscript))))) ;; assume it is on the path
	       ) ;; (rollup-status 0)


	  ;; NFS might not have propagated the directory meta data to the run host - give it time if needed
	  (let loop ((count 0))
	    (if (or (file-exists? top-path)
		    (> count 10))
		(change-directory top-path)
		(begin

						     (debug:print 0 "Done")
						     (exit 4)))))
			     (thread-start! th2)
			     (thread-start! th1)
			     (thread-join! th2)))))
	    (set-signal-handler! signal/int sighand)
	    (set-signal-handler! signal/term sighand)
	    ) ;; (set-signal-handler! signal/stop sighand)
	  


	  ;; Do not run the test if it is REMOVING, RUNNING, KILLREQ or REMOTEHOSTSTART,
	  ;; Mark the test as REMOTEHOSTSTART *IMMEDIATELY*
	  ;;
	  (let* ((test-info (rmt:get-test-info-by-id run-id test-id))
		 (test-host (db:test-get-host        test-info))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond

	  (set-item-env-vars itemdat)
	  (save-environment-as-files "megatest")
	  ;; open-run-close not needed for test-set-meta-info
	  ;; (tests:set-full-meta-info #f test-id run-id 0 work-area)
	  ;; (tests:set-full-meta-info test-id run-id 0 work-area)
	  (tests:set-full-meta-info #f test-id run-id 0 work-area 10)

	  ;; (thread-sleep! 0.3) ;; NFS slowness has caused grief here

	  (if (args:get-arg "-xterm")
	      (set! fullrunscript "xterm")
	      (if (and fullrunscript 
		       (file-exists? fullrunscript)
		       (not (file-execute-access? fullrunscript)))
		  (system (conc "chmod ug+x " fullrunscript))))

	  ;; We are about to actually kick off the test
	  ;; so this is a good place to remove the records for 
	  ;; any previous runs
	  ;; (db:test-remove-steps db run-id testname itemdat)
	  ;; 
	  (let* ((m            (make-mutex))
		 (kill-job?    #f)
		 (exit-info    (make-launch:einf pid: #t exit-status: #t exit-code: #t rollup-status: 0)) ;; pid exit-status exit-code (i.e. process was successfully run) rollup-status
		 (job-thread   #f)
		 ;; (keep-going   #t)








		 (misc-flags   (let ((ht (make-hash-table)))
				 (hash-table-set! ht 'keep-going #t)






















				 ht))





		 (runit        (lambda ()







				 (launch:manage-steps run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m)))






















		 (monitorjob   (lambda ()










				 (launch:monitor-job  run-id test-id item-path fullrunscript ezsteps test-name tconfigreg exit-info m work-area runtlim misc-flags)))







































































		 (th1          (make-thread monitorjob "monitor job"))
		 (th2          (make-thread runit "run job")))
	    (set! job-thread th2)
	    (thread-start! th1)
	    (thread-start! th2)
	    (thread-join! th2)
	    (debug:print-info 0 "Megatest exectute of test " test-name ", item path " item-path " complete. Notifying the db ...")
	    (hash-table-set! misc-flags 'keep-going #f)
	    (thread-join! th1)
	    (thread-sleep! 1)       ;; givbe thread th1 a chance to be done TODO: Verify this is needed. At 0.1 I was getting fail to stop, increased to total of 1.1 sec.
	    (mutex-lock! m)
	    (let* ((item-path (item-list->path itemdat))
		   ;; only state and status needed - use lazy routine
		   (testinfo  (rmt:get-testinfo-state-status run-id test-id)))
	      ;; Am I completed?

	     (target   (common:args-get-target))
	     (runname  (or (args:get-arg "-runname")
			   (args:get-arg ":runname")
			   (getenv "MT_RUNNAME")))
	     (fulldir  (conc linktree "/"
			     target "/"
			     runname)))

	(if (and linktree (file-exists? linktree)) ;; can't proceed without linktree
	    (begin
	      (debug:print-info 0 "Have -run with target=" target ", runname=" runname ", fulldir=" fulldir ", testpatt=" (or (args:get-arg "-testpatt") "%"))
	      (if (not (file-exists? fulldir))
		  (create-directory fulldir #t)) ;; need to protect with exception handler 
	      (if (and target
		       runname
		       (file-exists? fulldir))
		  (let ((tmpfile  (conc fulldir "/.megatest.cfg." (current-seconds)))
			(targfile (conc fulldir "/.megatest.cfg-"  megatest-version "-" megatest-fossil-hash))
			(rconfig  (conc fulldir "/.runconfig." megatest-version "-" megatest-fossil-hash)))
		    (if (file-exists? rconfig) ;; only cache megatest.config AFTER runconfigs has been cached
			(begin
			  (debug:print-info 0 "Caching megatest.config in " tmpfile)
			  (configf:write-alist *configdat* tmpfile)
			  (system (conc "ln -sf " tmpfile " " targfile))))
		    )))
	    (debug:print-info 1 "No linktree yet, no caching configs.")))))







































































;; gather available information, if legit read configs in this order:
;;
;;   if have cache;
;;      read it a return it
;;   else
;;     megatest.config     (do not cache)

			             mtconfig
				     environ-patt: "env-override"
				     given-toppath: toppath
				     pathenvvar: "MT_RUN_AREA_HOME"))
	     (first-rundat  (let ((toppath (if toppath 
					       toppath
					       (car first-pass))))
			      (read-config ;; (conc toppath "/runconfigs.config")
			       (conc (if (string? toppath)
					 toppath
					 (get-environment-variable "MT_RUN_AREA_HOME"))
				     "/runconfigs.config")
			       *runconfigdat* #t 
			       sections: sections))))
	(set! *runconfigdat* first-rundat)
	(if first-pass  ;; 
	    (begin
	      (set! *configdat*  (car first-pass))
	      (set! *configinfo* first-pass)
	      (set! *toppath*    (or toppath (cadr first-pass))) ;; use the gathered data unless already have it
	      (set! toppath      *toppath*)

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6102)

                            and then run the specified testpatt with -preclean
  -lock                   : lock run specified by target and runname
  -unlock                 : unlock run specified by target and runname
  -set-run-status status  : sets status for run to status, requires -target and -runname
  -get-run-status         : gets status for run specified by target and runname
  -run-wait               : wait on run specified by target and runname
  -preclean               : remove the existing test directory before running the test
  -clean-cache            : remove the cached megatest.config and runconfig.config files

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfig
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  -runname                : required, name for this particular test run
  -state                  : Applies to runs, tests or steps depending on context

			"-set-values"
			"-load-test-data"
			"-summarize-items"
		        "-gui"
			"-daemonize"
			"-preclean"
			"-rerun-clean"
			"-clean-cache"

			;; misc
			"-repl"
			"-lock"
			"-unlock"
			"-list-servers"
                        "-run-wait"      ;; wait on a run to complete (i.e. no RUNNING)

			 (delay-loop (+ count 1))))
		   (loop)))
	     (if (common:low-noise-print 30)
		 (debug:print-info 0 "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*)))))
     "Watchdog thread")))

(thread-start! *watchdog*)


(if (args:get-arg "-log")
    (let ((oup (open-output-file (args:get-arg "-log"))))
      (debug:print-info 0 "Sending log output to " (args:get-arg "-log"))
      (current-error-port oup)
      (current-output-port oup)))

	(change-directory (args:get-arg "-start-dir"))
	(begin
	  (debug:print 0 "ERROR: non-existant start dir " (args:get-arg "-start-dir") " specified, exiting.")
	  (exit 1))))

(if (args:get-arg "-version")
    (begin
      (print (common:version-signature)) ;; (print megatest-version)
      (exit)))

(define *didsomething* #f)

;; Overall exit handling setup immediately
;;
(if (or (args:get-arg "-process-reap"))

(if (args:get-arg "-itempatt")
    (let ((newval (conc (args:get-arg "-testpatt") "/" (args:get-arg "-itempatt"))))
      (debug:print 0 "WARNING: -itempatt has been deprecated, please use -testpatt testpatt/itempatt method, new testpatt is "newval)
      (hash-table-set! args:arg-hash "-testpatt" newval)
      (hash-table-delete! args:arg-hash "-itempatt")))

(if (args:get-arg "-runtests")
    (debug:print 0 "WARNING: \"-runtests\" is deprecated. Use \"-run\" with \"-testpatt\" instead"))

(on-exit std-exit-procedure)

;;======================================================================
;; Misc general calls
;;======================================================================

;; handle a clean-cache request as early as possible
;;
(if (args:get-arg "-clean-cache")
    (begin
      (set! *didsomething* #t) ;; suppress the help output.
      (if (getenv "MT_TARGET") ;; no point in trying if no target
	  (if (args:get-arg "-runname")
	      (let* ((toppath  (launch:setup))
		     (linktree (if toppath (configf:lookup *configdat* "setup" "linktree")))
		     (runtop   (conc linktree "/" (getenv "MT_TARGET") "/" (args:get-arg "-runname")))
		     (files    (if (file-exists? runtop)
				   (append (glob (conc runtop "/.megatest*"))
					   (glob (conc runtop "/.runconfig*")))
				   '())))
		(if (null? files)
		    (debug:print-info 0 "No cached megatest or runconfigs files found. None removed.")
		    (begin
		      (debug:print-info 0 "Removing cached files:\n    " (string-intersperse files "\n    "))
		      (for-each 
		       (lambda (f)
			 (handle-exceptions
			     exn
			     (debug:print 0 "WARNING: Failed to remove file " f)
			   (delete-file f)))
		       files))))
	      (debug:print 0 "ERROR: -clean-cache requires -runname."))
	  (debug:print 0 "ERROR: -clean-cache requires -target or -reqtarg"))))
	    
	  
(if (args:get-arg "-env2file")
    (begin
      (save-environment-as-files (args:get-arg "-env2file"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-disks")
    (let ((toppath (launch:setup)))
      (print 
       (string-intersperse 
	(map (lambda (x)
	       (string-intersperse 
		x
		" => "))
	     (common:get-disks *configdat*))
	"\n"))
      (set! *didsomething* #t)))
























;; csv processing record
(define (make-refdb:csv)
  (vector 
   (make-sparse-array)
   (make-hash-table)
   (make-hash-table)
   0

      ))

(if (args:get-arg "-ping")
    (let* ((run-id        (string->number (args:get-arg "-run-id")))
	   (host:port     (args:get-arg "-ping")))
      (server:ping run-id host:port)))









;;======================================================================
;; Capture, save and manipulate environments
;;======================================================================

;; NOTE: Keep these above the section where the server or client code is setup

(let ((envcap (args:get-arg "-envcap")))

		      (args:get-arg "-o")
		    (lambda ()
		      (env:print added removed changed)))
		  (env:print added removed changed))
	      (env:close-database db)
	      (set! *didsomething* #t))
	    (debug:print 0 "ERROR: Parameter to -envdelta should be new=star-end")))))



;;======================================================================
;; Start the server - can be done in conjunction with -runall or -runtests (one day...)
;;   we start the server if not running else start the client thread
;;======================================================================

(if (args:get-arg "-server")

      (exit 3))
     (else
      (if (not (car *configinfo*))
	  (begin
	    (debug:print 0 "ERROR: Attempted " action "on test(s) but run area config file not found")
	    (exit 1))
	  ;; put test parameters into convenient variables
	  (begin
	    ;; check for correct version, exit with message if not correct
	    (common:exit-on-version-changed)
	    (runs:operate-on  action
			      target
			      (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
			      (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
			      state: (common:args-get-state)
			      status: (common:args-get-status)
			      new-state-status: (args:get-arg "-set-state-status"))))
      (set! *didsomething* #t)))))

(if (args:get-arg "-remove-runs")
    (general-run-call 
     "-remove-runs"
     "remove runs"
     (lambda (target runname keys keyvals)
       (operate-on 'remove-runs))))

	     (db        #f))
	(change-directory testpath)
	(if (not (launch:setup))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    (let ((comment (launch:load-logpro-dat run-id test-id step)))
	      ;; (rmt:test-set-log! run-id test-id (conc stepname ".html"))))
	      (rmt:teststep-set-status! run-id test-id step state status (or comment msg) logfile))
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
	      (exit 6))))))

(if (args:get-arg "-step")
    (begin
      (megatest:step 

	       (db-host   (assoc/default 'db-host   cmdinfo))
	       (run-id    (assoc/default 'run-id    cmdinfo))
	       (test-id   (assoc/default 'test-id   cmdinfo))
	       (itemdat   (assoc/default 'itemdat   cmdinfo))
	       (work-area (assoc/default 'work-area cmdinfo))
	       (db        #f) ;; (open-db))
	       (state     (args:get-arg ":state"))
	       (status    (args:get-arg ":status"))
	       (stepname  (args:get-arg "-step")))
	  (if (not (launch:setup))
	      (begin
		(debug:print 0 "Failed to setup, exiting")
		(exit 1)))

	  (if (args:get-arg "-runstep")(debug:print-info 1 "Running -runstep, first change to directory " work-area))
	  (change-directory work-area)

       ;; 'new2old
       'killservers
       'dejunk
       ;; 'adj-testids
       ;; 'old2new
       'new2old
       )
      (if (common:version-changed?)
	  (common:set-last-run-version))
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 "Failed to setup, exiting")
	    (exit 1)))
      (open-run-close db:find-and-mark-incomplete #f)
      (set! *didsomething* #t)))

;;======================================================================
;; Update the tests meta data from the testconfig files
;;======================================================================

  (rmt:send-receive 'get-steps-for-test run-id (list run-id test-id)))

;;======================================================================
;;  T E S T   D A T A 
;;======================================================================

(define (rmt:read-test-data run-id test-id categorypatt #!key (work-area #f)) 
  (rmt:send-receive 'read-test-data run-id (list run-id test-id categorypatt)))
;;   (let ((tdb  (rmt:open-test-db-by-test-id run-id test-id work-area: work-area)))
;;     (if tdb
;; 	(tdb:read-test-data tdb test-id categorypatt)
;; 	'())))

(define (rmt:testmeta-add-record testname)
  (rmt:send-receive 'testmeta-add-record #f (list testname)))

(define (rmt:testmeta-get-record testname)
  (rmt:send-receive 'testmeta-get-record #f (list testname)))

    (if (and config-reruns
	     (> run-count config-reruns))
	(set! run-count config-reruns))
    
    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))

    (let ((sighand (lambda (signum)
		     ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
		     (set! *time-to-exit* #t)
		     (print "Received signal " signum ", cleaning up before exit. Please wait...")
		     (let ((th1 (make-thread (lambda ()
					       (let ((tdbdat (tasks:open-db)))
						 (rmt:tasks-set-state-given-param-key task-key "killed"))
					       (print "Killed by signal " signum ". Exiting")
					       (thread-sleep! 3)

    ;; NOTE: these are all parent tests, items are not expanded yet.
    (debug:print-info 4 "test-records=" (hash-table->alist test-records))
    (let ((reglen (configf:lookup *configdat* "setup" "runqueue")))
      (if (> (length (hash-table-keys test-records)) 0)
	  (let* ((keep-going        #t)
		 (run-queue-retries 5)
		 (th1        (make-thread (lambda ()
					    (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests (any->number reglen) all-tests-registry))
					    ;; (handle-exceptions
					    ;;  exn
					    ;;  (begin
					    ;;    (print-call-chain (current-error-port))
					    ;;    (debug:print 0 "ERROR: failure in runs:run-tests-queue thread, error: " ((condition-property-accessor 'exn 'message) exn))
					    ;;    (if (> run-queue-retries 0)
					    ;; 	   (begin
					    ;; 	     (set! run-queue-retries (- run-queue-retries 1))
					    ;; 	     (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests (any->number reglen) all-tests-registry))))
					    ;;  (runs:run-tests-queue run-id runname test-records keyvals flags test-patts required-tests (any->number reglen) all-tests-registry)))
					  "runs:run-tests-queue"))
		 (th2        (make-thread (lambda ()				    
					    ;; (rmt:find-and-mark-incomplete-all-runs))))) CAN'T INTERRUPT IT ...
					    (let ((run-ids (rmt:get-all-run-ids)))
					      (for-each (lambda (run-id)
							  (if keep-going
							      (handle-exceptions

(define *sretrieve:current-tab-number* 0)
(define *args-hash* (make-hash-table))
(define sretrieve:help (conc "Usage: " *exe-name* " [action [params ...]]

  ls                     : list contents of target area
  get <relversion>       : retrieve data for release <version>
    -m \"message\"       : why retrieved?
  cp <relative path>     : copy file to current directory 
  log                    : get listing of recent downloads

Part of the Megatest tool suite.
Learn more at http://www.kiatoa.com/fossils/megatest

Version: " megatest-fossil-hash)) ;; "

;; (call-with-database
;;  (lambda (db)
;;   (set-busy-handler! db (busy-timeout 10000)) ; 10 second timeout
;;   ...))

;; Create the sqlite db
(define (sretrieve:db-do configdat proc) 

  (let ((path (configf:lookup configdat "database" "location")))
    (if (not path)
	(begin
	  (debug:print 0 "[database]\nlocation /some/path\n\n Is missing from the config file!")
	  (exit 1)))
    (if (and path
	     (directory? path)
	     (file-read-access? path))
	(let* ((dbpath    (conc path "/" *exe-name* ".db"))
	       (writeable (file-write-access? dbpath))
	       (dbexists  (file-exists? dbpath)))
	  (handle-exceptions
	   exn
	   (begin
	     (debug:print 2 "ERROR: problem accessing db " dbpath
			  ((condition-property-accessor 'exn 'message) exn))
	     (exit 1))
            ;;(debug:print 0 "calling proc " proc "db path " dbpath )
	   (call-with-database
            dbpath
	    (lambda (db)
	       ;;(debug:print 0 "calling proc " proc " on db " db)
	      (set-busy-handler! db (busy-timeout 10000)) ;; 10 sec timeout
	      (if (not dbexists)(sretrieve:initialize-db db))
	      (proc db)))))
	(debug:print 0 "ERROR: invalid path for storing database: " path))))

;; copy in directory to dest, validation is done BEFORE calling this
;;
(define (sretrieve:get configdat retriever version comment)
  (let* ((base-dir  (configf:lookup configdat "settings" "base-dir"))
	 (datadir   (conc base-dir "/" version)))
    (if (or (not base-dir)
	    (not (file-exists? base-dir)))
	(begin

    
    (sretrieve:db-do
     configdat
     (lambda (db)
       (sretrieve:register-action db "get" retriever datadir comment)))
      (sretrieve:do-as-calling-user
       (lambda ()
         (if (directory? datadir)
	   (begin
  	    (change-directory datadir)
	    (let ((files (filter (lambda (x)
				(not (member x '("." ".."))))
			      (glob "*" ".*"))))
	     (print "files: " files)
	     (process-execute "/bin/tar" (append (append (list  "chfv" "-") files) (list "--ignore-failed-read")))))
             (begin
               (let* ((parent-dir (pathname-directory datadir) )
                      (filename  (conc(pathname-file datadir) "." (pathname-extension datadir))))
                  (change-directory parent-dir)  
                  (process-execute "/bin/tar" (list "chfv" "-" filename))
             )))
))
))


;; copy in file to dest, validation is done BEFORE calling this
;;
(define (sretrieve:cp configdat retriever file comment)
  (let* ((base-dir  (configf:lookup configdat "settings" "base-dir"))
         (allowed-sub-paths (configf:lookup configdat "settings" "allowed-sub-paths"))    
	 (datadir   (conc base-dir "/" file))
         (filename  (conc(pathname-file datadir) "." (pathname-extension datadir))))
    (if (or (not base-dir)
	    (not (file-exists? base-dir)))
	(begin
	  (debug:print 0 "ERROR: Bad configuration! base-dir " base-dir " not found")
	  (exit 1)))
    (print datadir)
    (if (not (file-exists? datadir))
	(begin
	  (debug:print 0 "ERROR: File  (" file "), not found at " base-dir "." )
	  (exit 1)))
    (if (directory? datadir)
	(begin
	  (debug:print 0 "ERROR: (" file ") is a dirctory!! cp cmd works only on files ." )
	  (exit 1)))
    (if(not (string-match (regexp  allowed-sub-paths) file))
        (begin
	  (debug:print 0 "ERROR: Access denied to file (" file ")!! " )
	  (exit 1)))
     
     (sretrieve:db-do
     configdat
     (lambda (db)
       (sretrieve:register-action db "cp" retriever datadir comment)))
      (sretrieve:do-as-calling-user
      ;;  (debug:print 0 "ph:  "(pathname-directory datadir)  "!! " )
       (change-directory (pathname-directory datadir))  
       ;;(debug:print 0 "ph: /bin/tar" (list "chfv" "-" filename) )
      (process-execute "/bin/tar" (list "chfv" "-" filename)))
      ))

;; ls in file to dest, validation is done BEFORE calling this
;;
(define (sretrieve:ls configdat retriever file comment)
  (let* ((base-dir  (configf:lookup configdat "settings" "base-dir"))
         (allowed-sub-paths (configf:lookup configdat "settings" "allowed-sub-paths"))    
	 (datadir   (conc base-dir "/" file))
         (filename  (conc(pathname-file datadir) "." (pathname-extension datadir))))
    (if (or (not base-dir)
	    (not (file-exists? base-dir)))
	(begin
	  (debug:print 0 "ERROR: Bad configuration! base-dir " base-dir " not found")
	  (exit 1)))
    (print datadir)
    (if (not (file-exists? datadir))
	(begin
	  (debug:print 0 "ERROR: File  (" file "), not found at " base-dir "." )
	  (exit 1)))
      (if(not (string-match (regexp  allowed-sub-paths) file))
        (begin
	  (debug:print 0 "ERROR: Access denied to file (" file ")!! " )
	  (exit 1)))
   
        (sretrieve:do-as-calling-user
        (lambda ()
	 ;;(change-directory datadir)
         ;; (debug:print 0  "/usr/bin/find" (list datadir "-ls" "|" "grep" "-E" "'"allowed-file-patt"'"))
         ;; (status (with-input-from-pipe "find " datadir " -ls | grep -E '" allowed-file-patt "'" (lambda () (read-line))))
         ;; (debug:print 0 status) 
	  (process-execute "/bin/ls" (list "-ls"  "-lrt" datadir ))
 ))))



;;(filter (lambda (x)
;;							     (not (member x '("." ".."))))
;;							   (glob "*" ".*"))))))))

(define (sretrieve:validate target-dir targ-mk)
  (let* ((normal-path (normalize-pathname targ-mk))

		   (make-hash-table))))
      (pop-directory)
      res)))

(define (sretrieve:process-action configdat action . args)
  (let* ((base-dir      (configf:lookup configdat "settings" "base-dir"))
	 (user          (current-user-name))
         (allowed-sub-paths (configf:lookup configdat "settings" "allowed-sub-paths")) 
	 (allowed-users (string-split
			 (or (configf:lookup configdat "settings" "allowed-users")
			     "")))
	 (default-area  (configf:lookup configdat "settings" "default-area"))) ;; otherwise known as the package
    
    (if (not base-dir)
	(begin

	      (package-type (or (args:get-arg "-package")
				default-area))
	      (exe-dir     (configf:lookup configdat "exe-info" "exe-dir")))
;;	      (relconfig   (sretrieve:load-packages configdat exe-dir package-type)))

	 (debug:print 0 "retrieving " version " of " package-type " as tar data on stdout")
	 (sretrieve:get configdat user version msg)))
         ((cp)
            (if (< (length args) 1)
             (begin 
	     (debug:print 0 "ERROR: Missing arguments; " (string-intersperse args ", "))
	     (exit 1)))
          (let* ((remargs     (args:get-args args '("-m" "-i" "-package") '() args:arg-hash 0))
              (file     (car args))
	      (msg         (or (args:get-arg "-m") "")) )

	 (debug:print 0 "copinging " file " to current directory " )
	 (sretrieve:cp configdat user file msg)))
      ((ls)
            (if (< (length args) 1)
             (begin 
	     (debug:print 0 "ERROR: Missing arguments; " (string-intersperse args ", "))
	     (exit 1)))
          (let* ((remargs     (args:get-args args '("-m" "-i" "-package") '() args:arg-hash 0))
              (dir     (car args))
	      (msg         (or (args:get-arg "-m") "")) )

	 (debug:print 0 "Listing files in " )
	 (sretrieve:ls configdat user dir msg)))
 
      (else (debug:print 0 "Unrecognised command " action)))))
  
;; ease debugging by loading ~/.dashboardrc - REMOVE FROM PRODUCTION!
;; (let ((debugcontrolf (conc (get-environment-variable "HOME") "/.sretrieverc")))
;;   (if (file-exists? debugcontrolf)
;;       (load debugcontrolf)))

	((ls)
	 (let* ((base-dir (configf:lookup configdat "settings" "base-dir")))
	   (if base-dir
	       (begin
		 (print "Files in " base-dir)
                 (sretrieve:do-as-calling-user
                    (lambda ()
		 (process-execute "/bin/ls" (list "-lrt" base-dir)))))
	       (print "ERROR: No base dir specified!"))))
	((log)
	 (sretrieve:db-do configdat (lambda (db)
				     (print "Logs : ")
				     (query (for-each-row
					     (lambda (row)
					       (apply print (intersperse row " | "))))

;; 	'())))

;; NOTE: Run this local with #f for db !!!
(define (tdb:load-test-data run-id test-id)
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 lin)
	  (rmt:csv->test-data run-id test-id lin)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status too 
  (rmt:test-data-rollup run-id test-id #f))

;; NOTE: Run this local with #f for db !!!
(define (tdb:load-logpro-data run-id test-id)
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 lin)
	  (rmt:csv->test-data run-id test-id lin)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status too 
  (rmt:test-data-rollup run-id test-id #f))

    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 
			(tdb:step-get-stepname step) 
			;;        stepname                start end status Duration  Logfile Comment
			(vector (tdb:step-get-stepname step) ""   "" ""     ""        ""     ""))))
	   (debug:print 6 "record(before) = " record 
			"\nid:       " (tdb:step-get-id step)
			"\nstepname: " (tdb:step-get-stepname step)
			"\nstate:    " (tdb:step-get-state step)
			"\nstatus:   " (tdb:step-get-status step)
			"\ntime:     " (tdb:step-get-event_time step))
	   (case (string->symbol (tdb:step-get-state step))

				      (debug:print 4 "record[1]=" (vector-ref record 1) 
						   ", startt=" startt ", endt=" endt
						   ", get-status: " (tdb:step-get-status step))
				      (if (and (number? startt)(number? endt))
					  (seconds->hr-min-sec (- endt startt)) "-1")))
	      (if (> (string-length (tdb:step-get-logfile step))
		     0)
		  (vector-set! record 5 (tdb:step-get-logfile step)))
	      (if (> (string-length (tdb:step-get-comment step))
		     0)
		  (vector-set! record 6 (tdb:step-get-comment step))))
	     (else
	      (vector-set! record 2 (tdb:step-get-state step))
	      (vector-set! record 3 (tdb:step-get-status step))
	      (vector-set! record 4 (tdb:step-get-event_time step))
	      (vector-set! record 6 (tdb:step-get-comment step))))
	   (hash-table-set! res (tdb:step-get-stepname step) record)
	   (debug:print 6 "record(after)  = " record 
			"\nid:       " (tdb:step-get-id step)
			"\nstepname: " (tdb:step-get-stepname step)
			"\nstate:    " (tdb:step-get-state step)
			"\nstatus:   " (tdb:step-get-status step)
			"\ntime:     " (tdb:step-get-event_time step))))
       ;; (else   (vector-set! record 1 (tdb:step-get-event_time step)))
       (sort steps (lambda (a b)
		     (cond
		      ((<   (tdb:step-get-event_time a)(tdb:step-get-event_time b)) #t)
		      ((eq? (tdb:step-get-event_time a)(tdb:step-get-event_time b)) 
		       (<   (tdb:step-get-id a)        (tdb:step-get-id b)))
		      (else #f)))))
      res))

;; 

;;
(define (tests:get-compressed-steps run-id test-id)


  (let* ((steps-data  (rmt:get-steps-for-test run-id test-id))
	 (comprsteps  (tests:process-steps-table steps-data))) ;; (open-run-close db:get-steps-table #f test-id work-area: work-area)))
    (map (lambda (x)
	   ;; take advantage of the \n on time->string
	   (vector
	    (vector-ref x 0)
	    (let ((s (vector-ref x 1)))
	      (if (number? s)(seconds->time-string s) s))
	    (let ((s (vector-ref x 2)))
	      (if (number? s)(seconds->time-string s) s))
	    (vector-ref x 3)    ;; status
	    (vector-ref x 4)
	    (vector-ref x 5)  ;; time delta
	    (vector-ref x 6)))
	 (sort (hash-table-values comprsteps)
	       (lambda (a b)
		 (let ((time-a (vector-ref a 1))
		       (time-b (vector-ref b 1)))
		   (if (and (number? time-a)(number? time-b))
		       (if (< time-a time-b)
			   #t

	 (test-name (db:test-get-testname test-dat))
	 (item-path (db:test-get-item-path test-dat))
	 (full-name (db:test-make-full-name test-name item-path))
	 (oup       (open-output-file (conc (db:test-get-rundir test-dat) "/test-summary.html")))
	 (status    (db:test-get-status   test-dat))
	 (color     (common:get-color-from-status status))
	 (logf      (db:test-get-final_logf test-dat))
	 (steps-dat (tests:get-compressed-steps run-id test-id)))
    ;; (dcommon:get-compressed-steps #f 1 30045)
    ;; (#("wasting_time" "23:36:13" "23:36:21" "0" "8.0s" "wasting_time.log"))

    (s:output-new
     oup
     (s:html
      (s:title "Summary for " full-name)

;;      (filter (lambda (testname)
;; 	       (tests:match test-patts testname #f))
;; 	     (map (lambda (testp)
;; 		    (last (string-split testp "/")))
;; 		  tests)))))

(define (tests:get-test-path-from-environment)
  (if (and (getenv "MT_LINKTREE")
	   (getenv "MT_TARGET")
	   (getenv "MT_RUNNAME")
	   (getenv "MT_TEST_NAME")
	   (getenv "MT_ITEMPATH"))
      (conc (getenv "MT_LINKTREE")  "/"
	    (getenv "MT_TARGET")    "/"
	    (getenv "MT_RUNNAME")   "/"
	    (getenv "MT_TEST_NAME") "/"
	    (if (or (getenv "MT_ITEMPATH")
		    (not (string=? "" (getenv "MT_ITEMPATH"))))
		(conc "/" (getenv "MT_ITEMPATH"))))
      #f))

;; if .testconfig exists in test directory read and return it
;; else if have cached copy in *testconfigs* return it IFF there is a section "have fulldata"
;; else read the testconfig file
;;   if have path to test directory save the config as .testconfig and return it
;;
(define (tests:get-testconfig test-name test-registry system-allowed #!key (force-create #f))

		     (testexists   (and (file-exists? test-configf)(file-read-access? test-configf)))
		     (tcfg         (if testexists
				       (read-config test-configf #f system-allowed
						    environ-patt: (if system-allowed
								      "pre-launch-env-vars"
								      #f))
				       #f)))
		(if (and tcfg cache-file) (hash-table-set! tcfg "have fulldata" #t)) ;; mark this as fully read data
		(if tcfg (hash-table-set! *testconfigs* test-name tcfg))
		(if (and testexists
			 cache-file
			 (file-write-access? cache-path))
		    (let ((tpath (conc cache-path "/.testconfig")))
		      (debug:print-info 1 "Caching testconfig for " test-name " in " tpath)
		      (configf:write-alist tcfg tpath)))

# Copyright 2013-2015 Matthew Welland.
# 
#  This program is made available under the GNU GPL version 2.0 or
#  greater. See the accompanying file COPYING for details.
# 
#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.

help :
	@echo You may need to do the following setup first:
	@echo
	@echo sudo apt-get install libreadline-dev
	@echo sudo apt-get install libwebkitgtk-dev libfreetype6-dev libx11-dev libxpm-dev libxmu-dev \
	           libxft-dev libgtk2.0-dev libgl1-mesa-dev libglu1-mesa-dev libpangox-1.0-dev bison \
                   libwebkitgtk-3.0-dev
	@echo   -- nb// adding monodevelop gets more packages of which some might be needed...
	@echo sudo apt-get install libmotif3
	@echo
	@echo Set up your PATH, setting it in the Makefile does not work as expected
	@echo export PATH=$(PREFIX)/bin:\$$PATH
	@echo
	@echo For IUP set IUPBRANCH, currently $(IUPBRANCH)
	@echo         set IUPCONFIG, currently $(IUPCONFIG) - look in https://www.kiatoa.com/fossils/iuplib for .inc files
	@echo You are using PREFIX=$(PREFIX)
	@echo You are using PRODCHICKEN=$(PRODCHICKEN)
	@echo You are using PROXY="$(PROXY)"
	@echo If needed set PROXY to host.dom:port
	@echo   http_proxy=$(http_proxy)
	@echo 
	@echo To make all do: make all
	@echo   make minimal: make nogui
	@echo 
	@echo Note: If compiling on amd64 do CSC_OPTIONS=\'-C "-fPIC"\' make all IUPCONFIG=

FPIC=-C "-fPIC"

# Put the installation here
ifeq ($(PREFIX),)
PREFIX=$(PWD)/target
endif
ifeq ($(PRODCHICKEN),)
PRODCHICKEN=$(PREFIX)/prod-chicken/
endif
# Set this on the command line of your make call if needed: make PROXY=host.com:1234
PROXY=

# http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
# http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
# Select version of chicken, sqlite3 etc
CHICKEN_VERSION=4.10.1
SQLITE3_VERSION=3090200
# http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# http://www.sqlite.org/2015/sqlite-autoconf-3081101.tar.gz
# Override IUPBRANCH to use other than trunk
IUPBRANCH=trunk
IUPCONFIG=ubuntu-15.04.inc
# iup-3.15

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
     dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
     json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
     spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
     srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables hahn linenoise \
     crypt parley

#
# Derived variables
#

ifeq ($(PROXY),)
PROX:=
else
http_proxy:=http://$(PROXY)
PROX:=-proxy $(PROXY)
endif

BUILDHOME=$(PWD)
PATH:=$(PREFIX)/bin:$(PATH)
LIBPATH=$(PREFIX)/lib$(ADDITIONAL_LIBPATH)
LD_LIBRARY_PATH=$(LIBPATH)
CHICKEN_INSTALL=$(PREFIX)/bin/chicken-install
CHICKEN_EGG_DIR=$(PREFIX)/lib/chicken/7

VPATH=$(CHICKEN_EGG_DIR):$(PWD)/eggflags

vpath %.so $(CHICKEN_EGG_DIR)
vpath %.flag eggflags

EGGSOFILES=$(addprefix $(CHICKEN_EGG_DIR)/,$(addsuffix .so,$(EGGS)))
EGGFLAGS=$(addprefix eggflags/,$(addsuffix .flag,$(EGGS)))

# Stuff needed for IUP
ISARCHX86_64=$(shell uname -a | grep x86_64)
ifeq ($(ISARCHX86_64),)
ARCHSIZE=
else
ARCHSIZE=64_
endif

CSCLIBS=$(shell echo $(LD_LIBRARY_PATH) | sed 's/:/ -L/g')
CSC_OPTIONS="-I$(PREFIX)/include -L$(CSCLIBS) -C \"-fPIC\""
# CSC_OPTIONS=-I $(PREFIX)/include -L $(CSCLIBS)

nogui : base mutils

#all : nogui libiup $(PREFIX)/lib/sqlite3.so
all : nogui libiup

base : chkn eggs 

# stuff needed for Kiatoa and Megatest from matts miscellaneous stash
#   NOTE TO SELF: eggifying these would be great...
mutils : base logprobin $(PREFIX)/bin/hs \
        $(PREFIX)/lib/chicken/7/mutils.so \
        $(PREFIX)/lib/chicken/7/dbi.so \
        $(PREFIX)/lib/chicken/7/stml.so \
        $(PREFIX)/lib/chicken/7/margs.so

chkn : $(CHICKEN_INSTALL)

eggs : $(EGGSOFILES)

# libiup : $(PREFIX)/lib/libavcall.a 
libiup : $(CHICKEN_EGG_DIR)/iup.so $(CHICKEN_EGG_DIR)/canvas-draw.so

logprobin : $(PREFIX)/bin/logpro

$(PREFIX)/bin/logpro : $(CHICKEN_EGG_DIR)/regex-literals.so
	$(CHICKEN_INSTALL) logpro

# Silly rule to make installing eggs more makeish, I don't understand why I need the basename
$(CHICKEN_EGG_DIR)/%.so : eggflags/%.flag
	$(CHICKEN_INSTALL) $(PROX) -keep-installed $(shell basename $*)

$(EGGFLAGS) : # $(CHICKEN_INSTALL)
	mkdir -p eggflags
	touch $(EGGFLAGS)

# some setup stuff
#
$(PREFIX)/setup-chicken4x.sh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo 'export PATH=$(PREFIX)/bin:$$PATH' > $(PREFIX)/setup-chicken4x.sh)
	(echo "export LD_LIBRARY_PATH=$(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.sh)

$(PREFIX)/setup-chicken4x.csh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo "setenv PATH $(PREFIX):'$$'PATH" > $(PREFIX)/setup-chicken4x.csh)
	(echo "setenv LD_LIBRARY_PATH $(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.csh)

chicken-core/chicken.scm : chicken-$(CHICKEN_VERSION).tar.gz
	#tar xf chicken-$(CHICKEN_VERSION).tar.gz
	#ln -sf chicken-$(CHICKEN_VERSION) chicken-core
	echo "Hello from chicken"

chicken-4.9.0rc1.tar.gz : 
	wget http://code.call-cc.org/dev-snapshots/2014/04/17/chicken-4.9.0rc1.tar.gz

chicken-4.9.0.1.tar.gz :
	wget http://code.call-cc.org/releases/4.9.0/chicken-4.9.0.1.tar.gz

chicken-4.10.0rc1.tar.gz :
	wget http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz

chicken-4.10.0.tar.gz :
	wget http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz

chicken-4.10.1.tar.gz :
	fossil clone https://www.kiatoa.com/fossils/chicken-core chicken-scheme.fossil
	mkdir -p chicken-core
	cd chicken-core; pwd
	cd chicken-core; fossil open ../chicken-scheme.fossil
	cd chicken-core; fossil up 337f5be
#	wget http://code.call-cc.org/dev-snapshots/2015/08/29/chicken-4.10.1.tar.gz

# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git

$(PRODCHICKEN)/bin/chicken :
	wget http://code.call-cc.org/dev-snapshots/2015/08/29/chicken-4.10.1.tar.gz
	tar -xzvf chicken-4.10.1.tar.gz
	cd chicken-4.10.1/; make PLATFORM=linux PREFIX=$(PRODCHICKEN)
	cd chicken-4.10.1/; make PLATFORM=linux PREFIX=$(PRODCHICKEN) install
	rm -rfv chicken-4.10.1/ 

$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh $(PRODCHICKEN)/bin/chicken
	cd chicken-core; LD_LIBRARY_PATH=$(PRODCHICKEN) make PLATFORM=linux CHICKEN=$(PRODCHICKEN)/bin/chicken  PREFIX=$(PREFIX)
	cd chicken-core; LD_LIBRARY_PATH=$(PRODCHICKEN) make PLATFORM=linux CHICKEN=$(PRODCHICKEN)/bin/chicken  PREFIX=$(PREFIX) install

#======================================================================
# S Q L I T E 3
#======================================================================
# https://www.sqlite.org/2015/sqlite-autoconf-3090200.tar.gz
sqlite-autoconf-$(SQLITE3_VERSION).tar.gz :
	wget  http://www.sqlite.org/2015/sqlite-autoconf-$(SQLITE3_VERSION).tar.gz

sqlite-autoconf-$(SQLITE3_VERSION)/config.log : sqlite-autoconf-$(SQLITE3_VERSION).tar.gz
	tar xf  sqlite-autoconf-$(SQLITE3_VERSION).tar.gz

$(PREFIX)/bin/sqlite3 : sqlite-autoconf-$(SQLITE3_VERSION)/config.log
	cd sqlite-autoconf-$(SQLITE3_VERSION);./configure --prefix=$(PREFIX);make;make install

$(CHICKEN_EGG_DIR)/sqlite3.so : $(PREFIX)/bin/sqlite3
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) sqlite3

#======================================================================
# N  A N O M S G
#======================================================================

# https://github.com/nanomsg/nanomsg/releases/download/0.6-beta/nanomsg-0.6-beta.tar.gz
# https://github.com/nanomsg/nanomsg/releases/download/0.8-beta/nanomsg-0.8-beta.tar.gz

nanomsg-0.6-beta.tar.gz :
	wget http://download.nanomsg.org/nanomsg-0.6-beta.tar.gz

nanomsg-0.6-beta/COPYING : nanomsg-0.6-beta.tar.gz
	tar xf nanomsg-0.6-beta.tar.gz

$(PREFIX)/bin/nanocat : nanomsg-0.6-beta/COPYING
	cd nanomsg-0.6-beta;./configure --prefix=$(PREFIX);make;make install

$(PREFIX)/lib/nanomsg.so : $(PREFIX)/bin/nanocat
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) nanomsg

# LD_LIBRARY_PATH=/mfs/pkgs/chicken/4.10.0-amd64/lib CSC_OPTIONS="-I/mfs/pkgs/chicken/4.10.0-amd64/include -L/mfs/pkgs/chicken/4.10.0-amd64/lib -C \"-fPIC\"" /mfs/pkgs/chicken/4.10.0-amd64/bin/chicken-install  -D no-library-checks nanomsg

#======================================================================
# M A T T S   U T I L S
#======================================================================

# opensrc

opensrc.fossil :
	fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil

opensrc/histstore/histstore.scm : opensrc.fossil
	mkdir -p opensrc
	cd opensrc;if [ -e .fslckout ];then fossil update; else fossil open ../opensrc.fossil; fi

$(PREFIX)/lib/chicken/7/mutils.so : opensrc/histstore/histstore.scm
	cd opensrc/mutils;chicken-install

$(PREFIX)/lib/chicken/7/dbi.so : opensrc/dbi/dbi.scm
	cd opensrc/dbi; sed -i -e 's/.*postgres.*/;;commented out/g' dbi.scm; chicken-install

$(PREFIX)/lib/chicken/7/margs.so : opensrc/margs/margs.scm
	cd opensrc/margs;chicken-install

opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(CHICKEN_EGG_DIR)/sqlite3.so 
	cd opensrc/histstore;$(PREFIX)/bin/csc histstore.scm -o hs

$(PREFIX)/bin/hs : opensrc/histstore/hs 
	cp -f opensrc/histstore/hs $(PREFIX)/bin/hs

# stml
stml.fossil :
	fossil clone http://www.kiatoa.com/fossils/stml stml.fossil

# open touches the .fossil :(
stml/requirements.scm.template : stml.fossil
	mkdir -p stml
	cd stml;if [ -e .fslckout ];then fossil update; else fossil open ../stml.fossil;fi

stml/requirements.scm : stml/requirements.scm.template
	cp stml/install.cfg.template      stml/install.cfg
	cp stml/requirements.scm.template stml/requirements.scm

$(PREFIX)/lib/chicken/7/stml.so : stml/requirements.scm
	cd stml; sed -i -e "s#.*TARGDIR.*#TARGDIR=$(PREFIX)/bin#g" install.cfg 
	cd stml;CSC_OPTIONS='-C "-fPIC"' make

#======================================================================
# F F C A L L (Used by IUP)
#======================================================================

ffcall.fossil :
	fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil

ffcall/README : ffcall.fossil
	mkdir -p ffcall
	cd ffcall && if [ -e README ];then fossil update; else fossil open ../ffcall.fossil; fi

# NOTE: This worked fine *without* the enable-shared
#
$(PREFIX)/lib/libavcall.a : ffcall/README
	cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make CC="gcc -fPIC" && make install

#======================================================================
# I U P 
#======================================================================

iuplib.fossil :
	#fossil clone http://www.kiatoa.com/fossils/iuplib iuplib.fossil
	touch iuplib.fossil
iup/installall.sh : iuplib.fossil $(PREFIX)/lib/libiup.so
	mkdir -p iup
	pwd
	wget -c --no-check-certificate http://sourceforge.net/projects/canvasdraw/files/5.9/Linux%20Libraries/cd-5.9_Linux26g4_64_lib.tar.gz/download
	wget -c --no-check-certificate http://sourceforge.net/projects/iup/files/3.17/Linux%20Libraries/iup-3.17_Linux26g4_64_lib.tar.gz/download
	wget -c --no-check-certificate http://sourceforge.net/projects/imtoolkit/files/3.10/Linux%20Libraries/im-3.10_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/luabinaries/files/5.3.2/Linux%20Libraries/lua-5.3.2_Linux26g4_64_lib.tar.gz/download
	tar -xzvf cd-5.9_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf im-3.10_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf iup-3.17_Linux26g4_64_lib.tar.gz -C iup/
	mkdir -p $(PREFIX)/include/ $(PREFIX)/lib/
	cp iup/include/* $(PREFIX)/include/
	cp iup/*.so $(PREFIX)/lib/
	cp iup/*.a $(PREFIX)/lib/

#	cd iup && if [ -e makeall.sh ];then fossil update $(IUPBRANCH); else fossil open ../iuplib.fossil;fossil update $(IUPBRANCH); fi

#iup/alldone : iup/makeall.sh $(PREFIX)/include/iup.h $(PREFIX)/lib/libiup.so
#	cd iup && ./makeall.sh $(IUPCONFIG)

$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh
#	cd iup && ./makeall.sh $(IUPCONFIG)

# $(PREFIX)/lib/libiup.so : iup/iup/alldone
#	touch -c $(PREFIX)/lib/libiup.so

$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup

# -feature disable-iup-web

$(CHICKEN_EGG_DIR)/canvas-draw.so :  $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw


clean :
	rm -rf chicken-4.8.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)

# Set this on the command line of your make call if needed: make PROXY=host.com:1234
PROXY=

# http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
# http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
# Select version of chicken, sqlite3 etc
# CHICKEN_VERSION=4.10.0
CHICKEN_VERSION=4.11.0rc2
SQLITE3_VERSION=3090200
# http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# http://www.sqlite.org/2015/sqlite-autoconf-3081101.tar.gz
# Override IUPBRANCH to use other than trunk
IUPBRANCH=trunk
IUPCONFIG=ubuntu-15.04.inc
# iup-3.15

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
     dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
     json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
     spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
     srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables hahn linenoise \
     crypt parley

#
# Derived variables
#

ifeq ($(PROXY),)
PROX:=
else
http_proxy:=http://$(PROXY)
PROX:=-proxy $(PROXY)
endif

BUILDHOME=$(PWD)
PATH:=$(PREFIX)/bin:$(PATH)
LIBPATH=$(PREFIX)/lib$(ADDITIONAL_LIBPATH)
LD_LIBRARY_PATH=$(LIBPATH)
CHICKEN_INSTALL=$(PREFIX)/bin/chicken-install
CHICKEN_EGG_DIR=$(PREFIX)/lib/chicken/8

VPATH=$(CHICKEN_EGG_DIR):$(PWD)/eggflags

vpath %.so $(CHICKEN_EGG_DIR)
vpath %.flag eggflags

EGGSOFILES=$(addprefix $(CHICKEN_EGG_DIR)/,$(addsuffix .so,$(EGGS)))

CSCLIBS=$(shell echo $(LD_LIBRARY_PATH) | sed 's/:/ -L/g')
CSC_OPTIONS="-I$(PREFIX)/include -L$(CSCLIBS) -C \"-fPIC\""
# CSC_OPTIONS=-I $(PREFIX)/include -L $(CSCLIBS)

nogui : base mutils

#all : nogui libiup $(PREFIX)/lib/sqlite3.so
all : nogui libiup

base : chkn eggs 

# stuff needed for Kiatoa and Megatest from matts miscellaneous stash
#   NOTE TO SELF: eggifying these would be great...
mutils : base logprobin $(PREFIX)/bin/hs \
        $(PREFIX)/lib/chicken/8/mutils.so \
        $(PREFIX)/lib/chicken/8/dbi.so \
        $(PREFIX)/lib/chicken/8/stml.so \
        $(PREFIX)/lib/chicken/8/margs.so

chkn : $(CHICKEN_INSTALL)

eggs : $(EGGSOFILES)

# libiup : $(PREFIX)/lib/libavcall.a 
libiup : $(CHICKEN_EGG_DIR)/iup.so $(CHICKEN_EGG_DIR)/canvas-draw.so

	(echo "export LD_LIBRARY_PATH=$(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.sh)

$(PREFIX)/setup-chicken4x.csh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo "setenv PATH $(PREFIX):'$$'PATH" > $(PREFIX)/setup-chicken4x.csh)
	(echo "setenv LD_LIBRARY_PATH $(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.csh)

# NOTE: the touch chicken-core/chicken.scm compensates for the time stamp from the tar file
chicken-core/chicken.scm : chicken-$(CHICKEN_VERSION).tar.gz
	tar xf chicken-$(CHICKEN_VERSION).tar.gz
	ln -sf chicken-$(CHICKEN_VERSION) chicken-core
	if [[ -e chicken-core/chicken.scm ]];then touch chicken-core/chicken.scm;fi

chicken-4.9.0rc1.tar.gz : 
	wget http://code.call-cc.org/dev-snapshots/2014/04/17/chicken-4.9.0rc1.tar.gz

chicken-4.9.0.1.tar.gz :
	wget http://code.call-cc.org/releases/4.9.0/chicken-4.9.0.1.tar.gz

chicken-4.10.0rc1.tar.gz :
	wget http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz

chicken-4.10.0.tar.gz :
	wget http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz

chicken-4.11.0rc2.tar.gz : 
	wget http://code.call-cc.org/dev-snapshots/2016/04/28/chicken-4.11.0rc2.tar.gz

# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git

$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX)
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX) install

opensrc.fossil :
	fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil

opensrc/histstore/histstore.scm : opensrc.fossil
	mkdir -p opensrc
	cd opensrc;if [ -e .fslckout ];then fossil update; else fossil open ../opensrc.fossil; fi

$(PREFIX)/lib/chicken/8/mutils.so : opensrc/histstore/histstore.scm
	cd opensrc/mutils;chicken-install

$(PREFIX)/lib/chicken/8/dbi.so : opensrc/dbi/dbi.scm
	cd opensrc/dbi;chicken-install

$(PREFIX)/lib/chicken/8/margs.so : opensrc/margs/margs.scm
	cd opensrc/margs;chicken-install

opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(CHICKEN_EGG_DIR)/sqlite3.so 
	cd opensrc/histstore;$(PREFIX)/bin/csc histstore.scm -o hs

$(PREFIX)/bin/hs : opensrc/histstore/hs 
	cp -f opensrc/histstore/hs $(PREFIX)/bin/hs

	mkdir -p stml
	cd stml;if [ -e .fslckout ];then fossil update; else fossil open ../stml.fossil;fi

stml/requirements.scm : stml/requirements.scm.template
	cp stml/install.cfg.template      stml/install.cfg
	cp stml/requirements.scm.template stml/requirements.scm

$(PREFIX)/lib/chicken/8/stml.so : stml/requirements.scm
	cd stml;make

#======================================================================
# F F C A L L (Used by IUP)
#======================================================================

ffcall.fossil :

	cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make CC="gcc -fPIC" && make install

#======================================================================
# I U P 
#======================================================================

iuplib.fossil :
	#fossil clone http://www.kiatoa.com/fossils/iuplib iuplib.fossil
	touch iuplib.fossil
iup/installall.sh : iuplib.fossil $(PREFIX)/lib/libiup.so
	mkdir -p iup
	pwd
	#wget -c http://sourceforge.net/projects/canvasdraw/files/5.9/Linux%20Libraries/cd-5.9_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/iup/files/3.17/Linux%20Libraries/iup-3.17_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/imtoolkit/files/3.10/Linux%20Libraries/im-3.10_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/luabinaries/files/5.3.2/Linux%20Libraries/lua-5.3.2_Linux26g4_64_lib.tar.gz/download
	tar -xzvf cd-5.9_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf im-3.10_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf iup-3.17_Linux26g4_64_lib.tar.gz -C iup/
	mkdir -p $(PREFIX)/include/ $(PREFIX)/lib/
	cp iup/include/* $(PREFIX)/include/
	cp iup/*.so $(PREFIX)/lib/
	cp iup/*.a $(PREFIX)/lib/

#	cd iup && if [ -e makeall.sh ];then fossil update $(IUPBRANCH); else fossil open ../iuplib.fossil;fossil update $(IUPBRANCH); fi

iup/alldone : iup/makeall.sh $(PREFIX)/include/iup.h $(PREFIX)/lib/libiup.so
#	cd iup && ./makeall.sh $(IUPCONFIG)

$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh iup/alldone
#	cd iup && ./makeall.sh $(IUPCONFIG)

# $(PREFIX)/lib/libiup.so : iup/iup/alldone
#	touch -c $(PREFIX)/lib/libiup.so

$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup

# -feature disable-iup-web

$(CHICKEN_EGG_DIR)/canvas-draw.so :  $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw


clean :
	rm -rf chicken-4.8.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)

# Copyright 2013-2015 Matthew Welland.
# 
#  This program is made available under the GNU GPL version 2.0 or
#  greater. See the accompanying file COPYING for details.
# 
#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.

help :
	@echo You may need to do the following setup first:
	@echo
	@echo sudo apt-get install libreadline-dev
	@echo sudo apt-get install libwebkitgtk-dev libfreetype6-dev libx11-dev libxpm-dev libxmu-dev \
	           libxft-dev libgtk2.0-dev libgl1-mesa-dev libglu1-mesa-dev libpangox-1.0-dev bison \
                   libwebkitgtk-3.0-dev
	@echo   -- nb// adding monodevelop gets more packages of which some might be needed...
	@echo sudo apt-get install libmotif3
	@echo
	@echo Set up your PATH, setting it in the Makefile does not work as expected
	@echo export PATH=$(PREFIX)/bin:\$$PATH
	@echo
	@echo For IUP set IUPBRANCH, currently $(IUPBRANCH)
	@echo         set IUPCONFIG, currently $(IUPCONFIG) - look in https://www.kiatoa.com/fossils/iuplib for .inc files
	@echo You are using PREFIX=$(PREFIX)
	@echo You are using PROXY="$(PROXY)"
	@echo If needed set PROXY to host.dom:port
	@echo   http_proxy=$(http_proxy)
	@echo 
	@echo To make all do: make all
	@echo   make minimal: make nogui
	@echo 
	@echo Note: If compiling on amd64 do CSC_OPTIONS=\'-C "-fPIC"\' make all IUPCONFIG=

FPIC=-C "-fPIC"

# Put the installation here
ifeq ($(PREFIX),)
PREFIX=$(PWD)/target
endif

# Set this on the command line of your make call if needed: make PROXY=host.com:1234
PROXY=

# http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
# http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
# Select version of chicken, sqlite3 etc
CHICKEN_VERSION=4.10.1
SQLITE3_VERSION=3090200
# http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz
# http://www.sqlite.org/2015/sqlite-autoconf-3081101.tar.gz
# Override IUPBRANCH to use other than trunk
IUPBRANCH=trunk
IUPCONFIG=ubuntu-15.04.inc
# iup-3.15

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
     dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
     json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
     spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
     srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables hahn linenoise \
     crypt parley zlib shell udp loops foof-loop lazy-seq ansi-escape-sequences rfc3339 slice \
     slice-utf8 scsh-process functional-lists srfi-101 uuid-lib filepath srfi-78 srfi-42 sexp-diff \
     low-level-macros symbol-utils expand-full chicken-doc irc silex lalr lalr-driver sha1 refdb

#
# Derived variables
#

ifeq ($(PROXY),)
PROX:=
else
http_proxy:=http://$(PROXY)
PROX:=-proxy $(PROXY)
endif

BUILDHOME=$(PWD)
PATH:=$(PREFIX)/bin:$(PATH)
LIBPATH=$(PREFIX)/lib$(ADDITIONAL_LIBPATH)
LD_LIBRARY_PATH=$(LIBPATH)
CHICKEN_INSTALL=$(PREFIX)/bin/chicken-install
CHICKEN_EGG_DIR=$(PREFIX)/lib/chicken/7

VPATH=$(CHICKEN_EGG_DIR):$(PWD)/eggflags

vpath %.so $(CHICKEN_EGG_DIR)
vpath %.flag eggflags

EGGSOFILES=$(addprefix $(CHICKEN_EGG_DIR)/,$(addsuffix .so,$(EGGS)))
EGGFLAGS=$(addprefix eggflags/,$(addsuffix .flag,$(EGGS)))

# Stuff needed for IUP
ISARCHX86_64=$(shell uname -a | grep x86_64)
ifeq ($(ISARCHX86_64),)
ARCHSIZE=
else
ARCHSIZE=64_
endif

CSCLIBS=$(shell echo $(LD_LIBRARY_PATH) | sed 's/:/ -L/g')
CSC_OPTIONS="-I$(PREFIX)/include -L$(CSCLIBS) -C \"-fPIC\""
# CSC_OPTIONS=-I $(PREFIX)/include -L $(CSCLIBS)

nogui : base mutils

#all : nogui libiup $(PREFIX)/lib/sqlite3.so
all : nogui libiup

base : chkn eggs 

# stuff needed for Kiatoa and Megatest from matts miscellaneous stash
#   NOTE TO SELF: eggifying these would be great...
mutils : base logprobin $(PREFIX)/bin/hs \
        $(PREFIX)/lib/chicken/7/mutils.so \
        $(PREFIX)/lib/chicken/7/dbi.so \
        $(PREFIX)/lib/chicken/7/stml.so \
        $(PREFIX)/lib/chicken/7/margs.so

chkn : $(CHICKEN_INSTALL)

eggs : $(EGGSOFILES)

# libiup : $(PREFIX)/lib/libavcall.a 
libiup : $(CHICKEN_EGG_DIR)/iup.so $(CHICKEN_EGG_DIR)/canvas-draw.so

logprobin : $(PREFIX)/bin/logpro

$(PREFIX)/bin/logpro : $(CHICKEN_EGG_DIR)/regex-literals.so
	$(CHICKEN_INSTALL) logpro

# Silly rule to make installing eggs more makeish, I don't understand why I need the basename
$(CHICKEN_EGG_DIR)/%.so : eggflags/%.flag
	$(CHICKEN_INSTALL) $(PROX) -keep-installed $(shell basename $*)

$(EGGFLAGS) : # $(CHICKEN_INSTALL)
	mkdir -p eggflags
	touch $(EGGFLAGS)

# some setup stuff
#
$(PREFIX)/setup-chicken4x.sh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo 'export PATH=$(PREFIX)/bin:$$PATH' > $(PREFIX)/setup-chicken4x.sh)
	(echo "export LD_LIBRARY_PATH=$(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.sh)

$(PREFIX)/setup-chicken4x.csh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo "setenv PATH $(PREFIX):'$$'PATH" > $(PREFIX)/setup-chicken4x.csh)
	(echo "setenv LD_LIBRARY_PATH $(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.csh)

chicken-core/chicken.scm : chicken-$(CHICKEN_VERSION).tar.gz
	tar xf chicken-$(CHICKEN_VERSION).tar.gz
	ln -sf chicken-$(CHICKEN_VERSION) chicken-core


chicken-4.9.0rc1.tar.gz : 
	wget http://code.call-cc.org/dev-snapshots/2014/04/17/chicken-4.9.0rc1.tar.gz

chicken-4.9.0.1.tar.gz :
	wget http://code.call-cc.org/releases/4.9.0/chicken-4.9.0.1.tar.gz

chicken-4.10.0rc1.tar.gz :
	wget http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz

chicken-4.10.0.tar.gz :
	wget http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz

chicken-4.10.1.tar.gz :
	wget http://code.call-cc.org/dev-snapshots/2015/08/29/chicken-4.10.1.tar.gz

# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git

$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX)
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX) install

#======================================================================
# S Q L I T E 3
#======================================================================
# https://www.sqlite.org/2015/sqlite-autoconf-3090200.tar.gz
sqlite-autoconf-$(SQLITE3_VERSION).tar.gz :
	wget  http://www.sqlite.org/2015/sqlite-autoconf-$(SQLITE3_VERSION).tar.gz

sqlite-autoconf-$(SQLITE3_VERSION)/config.log : sqlite-autoconf-$(SQLITE3_VERSION).tar.gz
	tar xf  sqlite-autoconf-$(SQLITE3_VERSION).tar.gz

$(PREFIX)/bin/sqlite3 : sqlite-autoconf-$(SQLITE3_VERSION)/config.log
	cd sqlite-autoconf-$(SQLITE3_VERSION);./configure --prefix=$(PREFIX);make;make install

$(CHICKEN_EGG_DIR)/sqlite3.so : $(PREFIX)/bin/sqlite3
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) sqlite3

#======================================================================
# N  A N O M S G
#======================================================================

# https://github.com/nanomsg/nanomsg/releases/download/0.6-beta/nanomsg-0.6-beta.tar.gz
# https://github.com/nanomsg/nanomsg/releases/download/0.8-beta/nanomsg-0.8-beta.tar.gz

nanomsg-0.6-beta.tar.gz :
	wget http://download.nanomsg.org/nanomsg-0.6-beta.tar.gz

nanomsg-0.6-beta/COPYING : nanomsg-0.6-beta.tar.gz
	tar xf nanomsg-0.6-beta.tar.gz

$(PREFIX)/bin/nanocat : nanomsg-0.6-beta/COPYING
	cd nanomsg-0.6-beta;./configure --prefix=$(PREFIX);make;make install

$(PREFIX)/lib/nanomsg.so : $(PREFIX)/bin/nanocat
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) nanomsg

# LD_LIBRARY_PATH=/mfs/pkgs/chicken/4.10.0-amd64/lib CSC_OPTIONS="-I/mfs/pkgs/chicken/4.10.0-amd64/include -L/mfs/pkgs/chicken/4.10.0-amd64/lib -C \"-fPIC\"" /mfs/pkgs/chicken/4.10.0-amd64/bin/chicken-install  -D no-library-checks nanomsg

#======================================================================
# M A T T S   U T I L S
#======================================================================

# opensrc

opensrc.fossil :
	fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil

opensrc/histstore/histstore.scm : opensrc.fossil
	mkdir -p opensrc
	cd opensrc;if [ -e .fslckout ];then fossil update; else fossil open ../opensrc.fossil; fi

$(PREFIX)/lib/chicken/7/mutils.so : opensrc/histstore/histstore.scm
	cd opensrc/mutils;chicken-install

$(PREFIX)/lib/chicken/7/dbi.so : opensrc/dbi/dbi.scm
	cd opensrc/dbi;chicken-install

$(PREFIX)/lib/chicken/7/margs.so : opensrc/margs/margs.scm
	cd opensrc/margs;chicken-install

opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(CHICKEN_EGG_DIR)/sqlite3.so 
	cd opensrc/histstore;$(PREFIX)/bin/csc histstore.scm -o hs

$(PREFIX)/bin/hs : opensrc/histstore/hs 
	cp -f opensrc/histstore/hs $(PREFIX)/bin/hs

# stml
stml.fossil :
	fossil clone http://www.kiatoa.com/fossils/stml stml.fossil

# open touches the .fossil :(
stml/requirements.scm.template : stml.fossil
	mkdir -p stml
	cd stml;if [ -e .fslckout ];then fossil update; else fossil open ../stml.fossil;fi

stml/requirements.scm : stml/requirements.scm.template
	cp stml/install.cfg.template      stml/install.cfg
	cp stml/requirements.scm.template stml/requirements.scm

$(PREFIX)/lib/chicken/7/stml.so : stml/requirements.scm
	cd stml;make

#======================================================================
# F F C A L L (Used by IUP)
#======================================================================

ffcall.fossil :
	fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil

ffcall/README : ffcall.fossil
	mkdir -p ffcall
	cd ffcall && if [ -e README ];then fossil update; else fossil open ../ffcall.fossil; fi

# NOTE: This worked fine *without* the enable-shared
#
$(PREFIX)/lib/libavcall.a : ffcall/README
	cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make CC="gcc -fPIC" && make install

#======================================================================
# I U P 
#======================================================================

iuplib.fossil :
	#fossil clone http://www.kiatoa.com/fossils/iuplib iuplib.fossil
	touch iuplib.fossil
iup/installall.sh : iuplib.fossil $(PREFIX)/lib/libiup.so
	mkdir -p iup
	pwd
	#wget -c http://sourceforge.net/projects/canvasdraw/files/5.9/Linux%20Libraries/cd-5.9_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/iup/files/3.17/Linux%20Libraries/iup-3.17_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/imtoolkit/files/3.10/Linux%20Libraries/im-3.10_Linux26g4_64_lib.tar.gz/download
	#wget -c http://sourceforge.net/projects/luabinaries/files/5.3.2/Linux%20Libraries/lua-5.3.2_Linux26g4_64_lib.tar.gz/download
	tar -xzvf cd-5.9_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf im-3.10_Linux26g4_64_lib.tar.gz -C iup/
	tar -xzvf iup-3.17_Linux26g4_64_lib.tar.gz -C iup/
	mkdir -p $(PREFIX)/include/ $(PREFIX)/lib/
	cp iup/include/* $(PREFIX)/include/
	cp iup/*.so $(PREFIX)/lib/
	cp iup/*.a $(PREFIX)/lib/

#	cd iup && if [ -e makeall.sh ];then fossil update $(IUPBRANCH); else fossil open ../iuplib.fossil;fossil update $(IUPBRANCH); fi

#iup/alldone : iup/makeall.sh $(PREFIX)/include/iup.h $(PREFIX)/lib/libiup.so
#	cd iup && ./makeall.sh $(IUPCONFIG)

$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh
#	cd iup && ./makeall.sh $(IUPCONFIG)

# $(PREFIX)/lib/libiup.so : iup/iup/alldone
#	touch -c $(PREFIX)/lib/libiup.so

$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup

# -feature disable-iup-web

$(CHICKEN_EGG_DIR)/canvas-draw.so :  $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw


clean :
	rm -rf chicken-4.8.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)