Megatest

;;
(define (launch-test-standalone test-work-dir)
  (when (not (directory-exists? test-work-dir))
    (debug:print-error 0 *default-log-port* "Cannot launch.  test-work-dir for lauched test does not exist, cannot proceed with launch: "test-work-dir)
    (exit 1))
  (change-directory test-work-dir)
  (let* ((launch-dat-file (conc test-run-dir "/launch.dat")))
    (if (not (common:file-exists? launch-dat-file))
        ;; error and exit
        #f
        (let* ((launch-info  (with-input-from-file launch-dat-file read))
               (run-id       (alist-ref 'run-id     launch-info))
               (test-id      (alist-ref 'test-id    launch-info))
               (work-area    (alist-ref 'work-area  launch-info))
               (fullcmd      (alist-ref 'fullcmd    launch-info))
               (launchwait   (alist-ref 'launchwait launch-info))
               (launch-results-prev
                (apply (if launchwait ;; BB: TODO: refactor this to examine return code of launcher, if nonzero, set state to launch failed.
                           process:cmd-run-with-stderr-and-exitcode->list
                           process-run)
                       (if useshell
                           (let ((cmdstr (string-intersperse fullcmd " ")))
                             (if launchwait
                                 cmdstr
                                 (conc cmdstr " >> mt_launch.log 2>&1 &")))
                           (car fullcmd))
                       (if useshell
					'()
					(cdr fullcmd))))
               (success
                (if launchwait (equal? 0 (cadr launch-results-prev)) #t)))
          (if success
              (tests:test-set-status! run-id test-id "LAUNCHED" "enqueued" #f #f) 
              (tests:test-set-status! run-id test-id "COMPLETED" "DEAD" "launcher failed; exited non-zero; check mt_launch.log" #f))
          (with-output-to-file "mt_launch.log"
            (lambda ()
              (print "LAUNCHCMD: " (string-intersperse fullcmd " "))
              (if (list? launch-results)
                  (apply print launch-results)
                  (print "NOTE: launched \"" fullcmd "\"\n  but did not wait for it to proceed. Add the following to megatest.config \n[setup]\nlaunchwait yes\n  if you have problems with this"))
              #:append))
          (debug:print 2 *default-log-port* "Launching completed, updating db")
          (debug:print 2 *default-log-port* "Launch results: " launch-results)





          success))))

;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
  (let* ( ;; (lock-key        (conc "test-" test-id))
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)
	;; 			    (begin
	;; 			      (debug:print-info 0 *default-log-port* "Timed out waiting for a lock to launch test " keyvals " " runname " " test-name " " test-path)
	;; 			      (rmt:no-sync-del! lock-key) ;; destroy the lock
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time)) ;; 
	;; 			    (begin
	;; 			      (thread-sleep! 1)
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time))))))
	 (item-path       (item-list->path itemdat))
	 (contour         #f)) ;; NOT READY FOR THIS (args:get-arg "-contour")))
    (let loop ((delta        (- (current-seconds) *last-launch*))
	       (launch-delay (configf:lookup-number *configdat* "setup" "launch-delay" default: 1)))
      (if (> launch-delay delta)
	  (begin
	    (if (common:low-noise-print 1200 "test launch delay") ;; every two hours or so remind the user about launch delay.
		(debug:print-info 0 *default-log-port* "NOTE: test launches are delayed by " launch-delay " seconds. See megatest.config launch-delay setting to adjust.")) ;; launch of " test-name " for " (- launch-delay delta) " seconds"))
	    (thread-sleep! (- launch-delay delta))
	    (loop (- (current-seconds) *last-launch*) launch-delay))))
    ;;(change-directory *toppath*)
    (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute", *maybe* - the longer they are set the longer each launch takes (must be non-overlapping with the vars)
     (append
      (list
       (list "MT_RUN_AREA_HOME" *toppath*)
       (list "MT_TEST_NAME" test-name)
       (list "MT_RUNNAME"   runname)
       (list "MT_ITEMPATH"  item-path)
       (list "MT_CONTOUR"   contour)
       )
      itemdat))
    (let* ((tregistry       (tests:get-all)) ;; third param (below) is system-allowed
           ;; for tconfig, why do we allow fallback to test-conf?
	   (tconfig         (or (tests:get-testconfig test-name item-path tregistry #t force-create: #t)
				(begin
                                  (debug:print 0 *default-log-port* "WARNING: falling back to pre-calculated testconfig. This is likely not desired.")
                                  test-conf))) ;; force re-read now that all vars are set
	   (useshell        (let ((ush (config-lookup *configdat* "jobtools"     "useshell")))
			      (if ush 
				  (if (equal? ush "no") ;; must use "no" to NOT use shell
				      #f
				      ush)
				  #t)))     ;; default is yes
	   (runscript       (config-lookup tconfig   "setup"        "runscript"))
	   (ezsteps         (> (length (hash-table-ref/default tconfig "ezsteps" '())) 0)) ;; don't send all the steps, could be big
	   ;; (diskspace       (config-lookup tconfig   "requirements" "diskspace"))
	   ;; (memory          (config-lookup tconfig   "requirements" "memory"))
	   ;; (hosts           (config-lookup *configdat* "jobtools"     "workhosts")) ;; I'm pretty sure this was never completed
	   (remote-megatest (config-lookup *configdat* "setup" "executable"))
	   (run-time-limit  (or (configf:lookup  tconfig   "requirements" "runtimelim")
				(configf:lookup  *configdat* "setup" "runtimelim")))
	   ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 
	   ;;                allow running from dashboard. Extract the path
	   ;;                from the called megatest and convert dashboard
	   ;;             	  or dboard to megatest
	   (local-megatest  (let* ((lm  (car (argv)))
				   (dir (pathname-directory lm))
				   (exe (pathname-strip-directory lm)))
			      (conc (if dir (conc dir "/") "")
				    (case (string->symbol exe)
				      ((dboard)    "../megatest")
				      ((mtest)     "../megatest")
				      ((dashboard) "megatest")
				      (else exe)))))
	   (launcher        (common:get-launcher *configdat* test-name item-path)) ;; (config-lookup *configdat* "jobtools"     "launcher"))
	   (test-sig        (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
	   (work-area       #f)
	   (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	   (diskpath   #f)
	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))
	   (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
				(if (args:get-arg "-logging")(list "-logging") '()))))
      ;; (if hosts (set! hosts (string-split hosts)))
      ;; set the megatest to be called on the remote host
      (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
      (set! mt-bindir-path (pathname-directory remote-megatest))
      (if launcher (set! launcher (string-split launcher)))
      ;; set up the run work area for this test
      (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	       (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	  (begin
	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (if diskpath
	  (let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
	    (debug:print-info 2 *default-log-port* "Using work area " work-area))
	  (begin
	    (set! work-area (conc test-path "/tmp_run"))
	    (create-directory work-area #t)
	    (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run")))
      (set! cmdparms (base64:base64-encode 
		      (z3:encode-buffer 
		       (with-output-to-string
			 (lambda () ;; (list 'hosts     hosts)
			   (write (list (list 'testpath  test-path)
					;; (list 'transport (conc *transport-type*))
					;; (list 'serverinf *server-info*)
					(list 'homehost  (let* ((hhdat (common:get-homehost)))
							   (if hhdat
							       (car hhdat)
							       #f)))
					(list 'serverurl (if *runremote*
							     (remote-server-url *runremote*)
							     #f)) ;;
					(list 'areaname  (common:get-testsuite-name))
					(list 'toppath   *toppath*)
					(list 'work-area work-area)
					(list 'test-name test-name) 
					(list 'runscript runscript) 
					(list 'run-id    run-id   )
					(list 'test-id   test-id  )
					;; (list 'item-path item-path )
					(list 'itemdat   itemdat  )
					(list 'megatest  remote-megatest)
					(list 'ezsteps   ezsteps) 
					(list 'target    mt_target)
					(list 'contour   contour)
					(list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
					(list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
					(list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
					(list 'runname   runname)
					(list 'mt-bindir-path mt-bindir-path))))))))
      
      ;; clean out step records from previous run if they exist
      ;; (rmt:delete-test-step-records run-id test-id)
      ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
      (if (common:file-exists? work-area)
	  (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
      (cond
       ;; ((and launcher hosts) ;; must be using ssh hostname
       ;;    (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
       (launcher
	(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
       (else
	(if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
	(set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
      ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
      (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
      (debug:print 1 *default-log-port* "Launching " work-area)
      ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
      (debug:print 4 *default-log-port* "fullcmd: " fullcmd)
      (set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible.
      (let* ((commonprevvals (alist->env-vars
			      (hash-table-ref/default *configdat* "env-override" '())))
	     (miscprevvals   (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
			      (append (list (list "MT_TEST_RUN_DIR" work-area)
					    (list "MT_TEST_NAME" test-name)
					    (list "MT_ITEM_INFO" (conc itemdat)) 
					    (list "MT_RUNNAME"   runname)
					    (list "MT_TARGET"    mt_target)
					    (list "MT_ITEMPATH"  item-path)
					    )
				      itemdat)))
	     (testprevvals   (alist->env-vars
			      (hash-table-ref/default tconfig "pre-launch-env-overrides" '())))
	     ;; Launchwait defaults to true, must override it to turn off wait
	     (launchwait     (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t))
             (launch-info    (list
                              (cons 'run-id run-id)
                              (cons 'test-id test-id)
                              (cons 'work-area work-area)
                              (cons 'fullcmd fullcmd)
                              (cons 'launchwait launchwait)))
             (launch-dat-file (conc work-area "/launch.dat"))
             (write-result    (with-output-to-file launch-dat-file
                               (lambda () (pp launch-info))))
             (lauch-cmd             (conc "megatest -start-dir "*toppath*" -internal-launch-test "work-area" &"))
	     )

        (system launch-cmd)

        (alist->env-vars miscprevvals)
	(alist->env-vars testprevvals)
	(alist->env-vars commonprevvals)
        (change-directory *toppath*)
        (mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork.
        write-result))))

	(if (and test-src-path (> remtries 0))
	    (begin
	      (debug:print-error 0 *default-log-port* "Failed to create work area at " test-path " with link at " lnktarget ", remaining attempts " remtries)
	      ;; 
	      (create-work-area run-id run-info keyvals test-id test-src-path disk-path testname itemdat remtries: (- remtries 1)))
	    (list #f #f)))))

;;
(define (launch-test-standalone test-work-dir)
  (when (not (directory-exists? test-work-dir))
    (debug:print-error 0 *default-log-port* "Cannot launch.  test-work-dir for lauched test does not exist, cannot proceed with launch: "test-work-dir)
    (exit 1))
  (change-directory test-work-dir)
  (let* ((launch-dat-file (conc test-work-dir "/launch.dat")))
    (if (not (common:file-exists? launch-dat-file))
        ;; error and exit
        #f
        (let* ((launch-info  (with-input-from-file launch-dat-file read))
               (run-id       (alist-ref 'run-id     launch-info))
               (test-id      (alist-ref 'test-id    launch-info))
               (work-area    (alist-ref 'work-area  launch-info))
               (fullcmd      (alist-ref 'fullcmd    launch-info))
               (launchwait   (alist-ref 'launchwait launch-info))
               (useshell     (alist-ref 'useshell   launch-info))
               (launch-results-prev
                (apply (if launchwait ;; BB: TODO: refactor this to examine return code of launcher, if nonzero, set state to launch failed.
                           process:cmd-run-with-stderr-and-exitcode->list
                           process-run)
                       (if useshell
                           (let ((cmdstr (string-intersperse fullcmd " ")))
                             (if launchwait
                                 cmdstr
                                 (conc cmdstr " >> mt_launch.log 2>&1 &")))
                           (car fullcmd))
                       (if useshell
					'()
					(cdr fullcmd))))
               (success
                (if launchwait (equal? 0 (cadr launch-results-prev)) #t))
               (exit-code (if launchwait (cadr launch-results-prev) 0))
               )
          (if success
              (tests:test-set-status! run-id test-id "LAUNCHED" "enqueued" #f #f) 
              (tests:test-set-status! run-id test-id "COMPLETED" "DEAD" "launcher failed; exited non-zero; check mt_launch.log" #f))
          (with-output-to-file "mt_launch.log"
            (lambda ()
              (print "LAUNCHCMD: " (string-intersperse fullcmd " "))
              (print "exit code => "exit-code)
(include "launch-test.scm")
              
              #:append))
          (debug:print 2 *default-log-port* "Launching completed, updating db")
          (debug:print 2 *default-log-port* "Launcher exit code: " exit-code)
          success))))

;; 1. look though disks list for disk with most space
;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
  (let* ( ;; (lock-key        (conc "test-" test-id))
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)
	;; 			    (begin
	;; 			      (debug:print-info 0 *default-log-port* "Timed out waiting for a lock to launch test " keyvals " " runname " " test-name " " test-path)
	;; 			      (rmt:no-sync-del! lock-key) ;; destroy the lock
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time)) ;; 
	;; 			    (begin
	;; 			      (thread-sleep! 1)
	;; 			      (loop (rmt:no-sync-get-lock lock-key) expire-time))))))
	 (item-path       (item-list->path itemdat))
	 (contour         #f)) ;; NOT READY FOR THIS (args:get-arg "-contour")))
    (let loop ((delta        (- (current-seconds) *last-launch*))
	       (launch-delay (configf:lookup-number *configdat* "setup" "launch-delay" default: 1)))
      (if (> launch-delay delta)
	  (begin
	    (if (common:low-noise-print 1200 "test launch delay") ;; every two hours or so remind the user about launch delay.
		(debug:print-info 0 *default-log-port* "NOTE: test launches are delayed by " launch-delay " seconds. See megatest.config launch-delay setting to adjust.")) ;; launch of " test-name " for " (- launch-delay delta) " seconds"))
	    (thread-sleep! (- launch-delay delta))
	    (loop (- (current-seconds) *last-launch*) launch-delay))))
    ;;(change-directory *toppath*)
    (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute", *maybe* - the longer they are set the longer each launch takes (must be non-overlapping with the vars)
     (append
      (list
       (list "MT_RUN_AREA_HOME" *toppath*)
       (list "MT_TEST_NAME" test-name)
       (list "MT_RUNNAME"   runname)
       (list "MT_ITEMPATH"  item-path)
       (list "MT_CONTOUR"   contour)
       )
      itemdat))
    (let* ((tregistry       (tests:get-all)) ;; third param (below) is system-allowed
           ;; for tconfig, why do we allow fallback to test-conf?
	   (tconfig         (or (tests:get-testconfig test-name item-path tregistry #t force-create: #t)
				(begin
                                  (debug:print 0 *default-log-port* "WARNING: falling back to pre-calculated testconfig. This is likely not desired.")
                                  test-conf))) ;; force re-read now that all vars are set
	   (useshell        (let ((ush (config-lookup *configdat* "jobtools"     "useshell")))
			      (if ush 
				  (if (equal? ush "no") ;; must use "no" to NOT use shell
				      #f
				      ush)
				  #t)))     ;; default is yes
	   (runscript       (config-lookup tconfig   "setup"        "runscript"))
	   (ezsteps         (> (length (hash-table-ref/default tconfig "ezsteps" '())) 0)) ;; don't send all the steps, could be big
	   ;; (diskspace       (config-lookup tconfig   "requirements" "diskspace"))
	   ;; (memory          (config-lookup tconfig   "requirements" "memory"))
	   ;; (hosts           (config-lookup *configdat* "jobtools"     "workhosts")) ;; I'm pretty sure this was never completed
	   (remote-megatest (config-lookup *configdat* "setup" "executable"))
	   (run-time-limit  (or (configf:lookup  tconfig   "requirements" "runtimelim")
				(configf:lookup  *configdat* "setup" "runtimelim")))
	   ;; FIXME SOMEDAY: not good how this is so obtuse, this hack is to 
	   ;;                allow running from dashboard. Extract the path
	   ;;                from the called megatest and convert dashboard
	   ;;             	  or dboard to megatest
	   (local-megatest  (let* ((lm  (car (argv)))
				   (dir (pathname-directory lm))
				   (exe (pathname-strip-directory lm)))
			      (conc (if dir (conc dir "/") "")
				    (case (string->symbol exe)
				      ((dboard)    "../megatest")
				      ((mtest)     "../megatest")
				      ((dashboard) "megatest")
				      (else exe)))))
	   (launcher        (common:get-launcher *configdat* test-name item-path)) ;; (config-lookup *configdat* "jobtools"     "launcher"))
	   (test-sig        (conc (common:get-testsuite-name) ":" test-name ":" item-path)) ;; (item-list->path itemdat))) ;; test-path is the full path including the item-path
	   (work-area       #f)
	   (toptest-work-area #f) ;; for iterated tests the top test contains data relevant for all
	   (diskpath   #f)
	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))
	   (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
				(if (args:get-arg "-logging")(list "-logging") '()))))
      ;; (if hosts (set! hosts (string-split hosts)))
      ;; set the megatest to be called on the remote host
      (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
      (set! mt-bindir-path (pathname-directory remote-megatest))
      (if launcher (set! launcher (string-split launcher)))
      ;; set up the run work area for this test
      (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	       (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	  (begin
	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (if diskpath
	  (let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
	    (debug:print-info 2 *default-log-port* "Using work area " work-area))
	  (begin
	    (set! work-area (conc test-path "/tmp_run"))
	    (create-directory work-area #t)
	    (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run")))
      (set! cmdparms (base64:base64-encode 
		      (z3:encode-buffer 
		       (with-output-to-string
			 (lambda () ;; (list 'hosts     hosts)
			   (write (list (list 'testpath  test-path)
					;; (list 'transport (conc *transport-type*))
					;; (list 'serverinf *server-info*)
					(list 'homehost  (let* ((hhdat (common:get-homehost)))
							   (if hhdat
							       (car hhdat)
							       #f)))
					(list 'serverurl (if *runremote*
							     (remote-server-url *runremote*)
							     #f)) ;;
					(list 'areaname  (common:get-testsuite-name))
					(list 'toppath   *toppath*)
					(list 'work-area work-area)
					(list 'test-name test-name) 
					(list 'runscript runscript) 
					(list 'run-id    run-id   )
					(list 'test-id   test-id  )
					;; (list 'item-path item-path )
					(list 'itemdat   itemdat  )
					(list 'megatest  remote-megatest)
					(list 'ezsteps   ezsteps) 
					(list 'target    mt_target)
					(list 'contour   contour)
					(list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
					(list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
					(list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
					(list 'runname   runname)
					(list 'mt-bindir-path mt-bindir-path))))))))
      
      ;; clean out step records from previous run if they exist
      ;; (rmt:delete-test-step-records run-id test-id)
      ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
      (if (common:file-exists? work-area)
	  (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
      (cond
       ;; ((and launcher hosts) ;; must be using ssh hostname
       ;;    (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
       (launcher
	(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
       (else
	(if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
	(set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
      ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
      (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
      (debug:print 1 *default-log-port* "Launching " work-area)
      ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
      (debug:print 4 *default-log-port* "fullcmd: " fullcmd)
      (set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible.
      (let* ((commonprevvals (alist->env-vars
			      (hash-table-ref/default *configdat* "env-override" '())))
	     (miscprevvals   (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
			      (append (list (list "MT_TEST_RUN_DIR" work-area)
					    (list "MT_TEST_NAME" test-name)
					    (list "MT_ITEM_INFO" (conc itemdat)) 
					    (list "MT_RUNNAME"   runname)
					    (list "MT_TARGET"    mt_target)
					    (list "MT_ITEMPATH"  item-path)
					    )
				      itemdat)))
	     (testprevvals   (alist->env-vars
			      (hash-table-ref/default tconfig "pre-launch-env-overrides" '())))
	     ;; Launchwait defaults to true, must override it to turn off wait
	     (launchwait     (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t))
             (launch-info    (list
                              (cons 'run-id     run-id)
                              (cons 'test-id    test-id)
                              (cons 'work-area  work-area)
                              (cons 'fullcmd    fullcmd)
                              (cons 'launchwait launchwait)
                              (cons 'useshell   useshell)))
             (launch-dat-file (conc work-area "/launch.dat"))
             (write-result    (with-output-to-file launch-dat-file
                               (lambda () (pp launch-info))))
             (launch-cmd             (conc "megatest -start-dir "*toppath*" -internal-launch-test "work-area" &"))
	     )

        (system launch-cmd)

        (alist->env-vars miscprevvals)
	(alist->env-vars testprevvals)
	(alist->env-vars commonprevvals)
        (change-directory *toppath*)
        (mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork.
        write-result))))

;; recover a test where the top controlling mtest may have died
;;
(define (launch:recover-test run-id test-id)
  ;; this function is called on the test run host via ssh
  ;;
  ;; 1. look at the process from pid
  ;;    - is it owned by calling user

			"-runstep"
			"-logpro"
			"-m"
			"-rerun"
			"-days"
			"-rename-run"
			"-to"
                        "-internal-launch-test" 
			;; values and messages
			":category"
			":variable"
			":value"
			":expected"
			":tol"
			":units"

     "-rollup" 
     "rollup tests" 
     (lambda (target runname keys keyvals)
       (runs:rollup-run keys
			keyvals
			(or (args:get-arg "-runname")(args:get-arg ":runname") )
			user))))

;;======================================================================
;; launch test in separate call; takes test run dir as argument.
;;======================================================================
(if (args:get-arg "-internal-launch-test")
    (let ((toppath  (launch:setup)))
      (launch-test-standalone (args:get-arg "-internal-launch-test"))
      (set! *didsomething* #t)))




;;======================================================================
;; Lock or unlock a run
;;======================================================================

(if (or (args:get-arg "-lock")(args:get-arg "-unlock"))
    (general-run-call