Megatest

    ;; TESTS
    test-set-state-status-by-id
    delete-test-records
    delete-old-deleted-test-records
    test-set-status-state
    test-set-top-process-pid
    roll-up-pass-fail-counts
    update-fail-pass-counts
    update-pass-fail-counts
    top-test-set-per-pf-counts ;; (db:top-test-set-per-pf-counts (db:get-db *db* 5) 5 "runfirst")

    ;; RUNS
    register-run
    set-tests-state-status
    delete-run
    lock/unlock-run
    update-run-event_time

	    ((test-set-state-status-by-id)     (apply db:test-set-state-status-by-id dbstruct params))
	    ((delete-test-records)             (apply db:delete-test-records dbstruct params))
	    ((delete-old-deleted-test-records) (apply db:delete-old-deleted-test-records dbstruct params))
	    ((test-set-status-state)           (apply db:test-set-status-state dbstruct params))
	    ((test-set-top-process-pid)        (apply db:test-set-top-process-pid dbstruct params))
	    ((roll-up-pass-fail-counts)        (apply db:roll-up-pass-fail-counts dbstruct params))
	    ((update-pass-fail-counts)         (apply db:general-call dbstruct 'update-pass-fail-counts params))
	    ((top-test-set-per-pf-counts)      (apply db:top-test-set-per-pf-counts dbstruct params))
	    ((test-set-archive-block-id)       (apply db:test-set-archive-block-id dbstruct params))

	    ;; RUNS
	    ((register-run)                 (apply db:register-run dbstruct params))
	    ((set-tests-state-status)       (apply db:set-tests-state-status dbstruct params))
	    ((delete-run)                   (apply db:delete-run dbstruct params))
	    ((lock/unlock-run)              (apply db:lock/unlock-run dbstruct params))

;; Copyright 2006-2014, Matthew Welland.
;; 
;;  This program is made available under the GNU GPL version 2.0 or
;;  greater. See the accompanying file COPYING for details.
;; 
;;  This program is distributed WITHOUT ANY WARRANTY; without even the
;;  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
;;  PURPOSE.

;;  strftime('%m/%d/%Y %H:%M:%S','now','localtime')

(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking format md5 message-digest)
(use sqlite3 srfi-1 posix regex regex-case srfi-69 dot-locking format md5 message-digest srfi-18)
(import (prefix sqlite3 sqlite3:))

(declare (unit archive))
(declare (uses db))
(declare (uses common))

(include "common_records.scm")

;; archive - run bup
;;
;; 1. create the bup dir if not exists
;; 2. start the du of each directory
;; 3. gen index
;; 4. save
;;
(define (archive:run-bup archive-command run-id run-name tests)
(define (archive:run-bup archive-command run-id run-name tests rp-mutex bup-mutex)
  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;
  (let* ((min-space    (string->number (or (configf:lookup *configdat* "archive" "minspace") "1000")))
	 (archive-info (archive:allocate-new-archive-block *toppath* (common:get-testsuite-name) min-space))
	 (archive-dir  (if archive-info (cdr archive-info) #f))
	 (archive-id   (if archive-info (car archive-info) -1))

	      (target            (string-intersperse (map cadr (rmt:get-key-val-pairs run-id)) "/"))
	      
	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      (mutex-lock! rp-mutex)
	      (test-physical-path (if (file-exists? test-path) (read-symbolic-link test-path #t) #f))
	      (test-physical-path (if (file-exists? test-path) 
				      (common:real-path test-path)
				      #f))
	      (mutex-unlock! rp-mutex)
	      (partial-path-index (if test-physical-path (substring-index test-partial-path test-physical-path) #f))
	      (test-base         (if (and partial-path-index 
					  test-physical-path )
				     (substring test-physical-path
						0
						partial-path-index)
				     #f)))
	 
 	 (cond
 	 (if (or toplevel/children
		 (not (file-exists? test-path)))
	  (toplevel/children
	   (debug:print 0 "WARNING: cannot archive " test-name " with id " test-id " as it is a toplevel test with children"))
	  ((not (file-exists? test-path))
	     #f
	     (begin
	       (debug:print 0
			    "From test-dat=" test-dat " derived the following:\n"
			    "test-partial-path  = " test-partial-path "\n"
			    "test-path          = " test-path "\n"
			    "test-physical-path = " test-physical-path "\n"
			    "partial-path-index = " partial-path-index "\n"
			    "test-base          = " test-base)
	       (hash-table-set! disk-groups test-base (cons test-physical-path (hash-table-ref/default disk-groups test-base '())))
	       (hash-table-set! test-groups test-base (cons test-dat (hash-table-ref/default test-groups test-base '())))
	       test-path))))
	   (debug:print 0 "WARNING: Cannot archive " test-name "/" item-path " as path " test-path " does not exist"))
	  (else
	   (debug:print 0
			"From test-dat=" test-dat " derived the following:\n"
			"test-partial-path  = " test-partial-path "\n"
			"test-path          = " test-path "\n"
			"test-physical-path = " test-physical-path "\n"
			"partial-path-index = " partial-path-index "\n"
			"test-base          = " test-base)
	   (hash-table-set! disk-groups test-base (cons test-physical-path (hash-table-ref/default disk-groups test-base '())))
	   (hash-table-set! test-groups test-base (cons test-dat (hash-table-ref/default test-groups test-base '())))
	   test-path))))
     tests)
    ;; for each disk-group
    (for-each 
     (lambda (disk-group)
       (debug:print 0 "Processing disk-group " disk-group)
       (let* ((test-paths (hash-table-ref disk-groups disk-group))
	      ;; ((string-intersperse (map cadr (rmt:get-key-val-pairs 1)) "-")

	      (print-prefix      #f)) ;; "Running: ")) ;; change to #f to turn off printing
	 (if (not (file-exists? archive-dir))
	     (create-directory archive-dir #t))
	 (if (not (file-exists? (conc archive-dir "/HEAD")))
	     (begin
	       ;; replace this with jobrunner stuff enventually
	       (debug:print-info 0 "Init bup in " archive-dir)
	       ;; (mutex-lock! bup-mutex)
	       (run-n-wait bup-exe params: bup-init-params print-cmd: print-prefix)))
	       (run-n-wait bup-exe params: bup-init-params print-cmd: print-prefix)
	       ;; (mutex-unlock! bup-mutex)
	       ))
	 (debug:print-info 0 "Indexing data to be archived")
	 ;; (mutex-lock! bup-mutex)
	 (run-n-wait bup-exe params: bup-index-params print-cmd: print-prefix)
	 (debug:print-info 0 "Archiving data with bup")
	 (run-n-wait bup-exe params: bup-save-params print-cmd: print-prefix)
	 ;; (mutex-unlock! bup-mutex)
	 (for-each
	  (lambda (test-dat)
	    (let ((test-id           (db:test-get-id        test-dat))
		  (run-id            (db:test-get-run_id    test-dat)))
	      (rmt:test-set-archive-block-id run-id test-id archive-id)
	      (if (member archive-command '("save-remove"))
		  (runs:remove-test-directory test-dat 'archive-remove))))
	  (hash-table-ref test-groups disk-group))))
     (hash-table-keys disk-groups))
    #t))

(define (archive:bup-restore archive-command run-id run-name tests)  ;; move the getting of archive space down into the below block so that a single run can 
(define (archive:bup-restore archive-command run-id run-name tests rp-mutex bup-mutex)  ;; move the getting of archive space down into the below block so that a single run can 
  ;; allocate as needed should a disk fill up
  ;;
  (let* ((bup-exe      (or (configf:lookup *configdat* "archive" "bup") "bup"))
	 (linktree     (configf:lookup *configdat* "setup" "linktree")))

    ;; from the test info bin the path to the test by stem
    ;;
    (for-each
     (lambda (test-dat)
       ;; When restoring test-dat will initially contain an old and invalid path to the test
       (let* ((best-disk         (get-best-disk *configdat*))
       (let* ((best-disk         (get-best-disk *configdat* #f)) ;; BUG: get the testconfig and use it here. Otherwise data pulled out of archive could end up on the wrong kind of disk.
	      (item-path         (db:test-get-item-path test-dat))
	      (test-name         (db:test-get-testname  test-dat))
	      (test-id           (db:test-get-id        test-dat))
	      (run-id            (db:test-get-run_id    test-dat))
	      (keyvals           (rmt:get-key-val-pairs run-id))
	      (target            (string-intersperse (map cadr keyvals) "/"))
	      
	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      ;; if the old path was not deleted then prev-test-physical-path will end up pointing to a real directory
	      (mutex-lock! rp-mutex)
	      (prev-test-physical-path (if (file-exists? test-path) (read-symbolic-link test-path #t) #f))

	      (prev-test-physical-path (if (file-exists? test-path)
					   ;; (read-symbolic-link test-path #t)
					   (common:real-path test-path)
					   #f))
	      (mutex-unlock! rp-mutex)
	      (new-test-physical-path  (conc best-disk "/" test-partial-path))
	      (archive-block-id        (db:test-get-archived test-dat))
	      (archive-block-info      (rmt:test-get-archive-block-info archive-block-id))
	      (archive-path            (if (vector? archive-block-info)
					   (vector-ref archive-block-info 2) ;; look in db.scm for test-get-archive-block-info for the vector record info
					   #f)) ;; no archive found?
	      (archive-internal-path   (conc (common:get-testsuite-name) "-" run-id "/latest/" test-partial-path)))

					       (db:test-get-rundir new-test-dat)
					       (begin
						 (debug:print 0 "ERROR: unable to get data for run-id=" run-id ", test-id=" test-id)
						 (exit 1))))
		      ;; new-test-path won't work - must use best-disk instead? Nope, new-test-path but tack on /..
		      (bup-restore-params  (list "-d" archive-path "restore" "-C" (conc new-test-path "/..") archive-internal-path)))
		 (debug:print-info 0 "Restoring archived data to " new-test-physical-path " from archive in " archive-path " ... " archive-internal-path)
		 ;; (mutex-lock! bup-mutex)
		 (run-n-wait bup-exe params: bup-restore-params print-cmd: #f)
		 ;; (mutex-unlock! bup-mutex)
		 (mt:test-set-state-status-by-id run-id test-id "COMPLETED" #f #f)))
	     (debug:print 0 "ERROR: No archive path in the record for run-id=" run-id " test-id=" test-id))))
     (filter vector? tests))))
	 

(define (get-uname . params)
  (let* ((uname-res (cmd-run->list (conc "uname " (if (null? params) "-a" (car params)))))
	 (uname #f))
    (if (null? (car uname-res))
	"unknown"
	(caar uname-res))))

;; for reasons I don't understand multiple calls to real-path in parallel threads
;; must be protected by mutexes
;;
(define (common:real-path inpath)
  ;; (cmd-run-with-stderr->list "readlink" "-f" inpath)) ;; cmd . params)
  ;; (let-values 
  ;;  (((inp oup pid) (process "readlink" (list "-f" inpath))))
  ;;  (with-input-from-port inp
  ;;    (let loop ((inl (read-line))
  ;;       	(res #f))
  ;;      (print "inl=" inl)
  ;;      (if (eof-object? inl)
  ;;          (begin
  ;;            (close-input-port inp)
  ;;            (close-output-port oup)
  ;;            ;; (process-wait pid)
  ;;            res)
  ;;          (loop (read-line) inl))))))
  (with-input-from-pipe (conc "readlink -f " inpath) read-line))

;;======================================================================
;; D I S K   S P A C E 
;;======================================================================

(define (common:get-disk-space-used fpath)
  (with-input-from-pipe (conc "/usr/bin/du -s " fpath) read))

# Read in the users vars first (so the offical data cannot be overridden
[include ~/.datashare.config]

# Read in local overrides
[include datashare.config]

# Replace [storage] with settings entry - more secure
[settings]

storage /tmp/#{getenv USER}/datashare/disk1 \
        /tmp/#{getenv USER}/datashare/disk2

basepath #{getenv BASEPATH}
basepath #{scheme (or (getenv "BASEPATH") "/tmp/#{getenv USER}")}

[areas]
synthesis  asic/synthesis
verilog    asic/verilog
customlibs custom/oalibs
megatest   tools/megatest

    (iup:button "Pushme"
		#:expand "YES"
		))))

(define (datashare:gui configdat)
  (iup:show
   (iup:dialog 
    #:title (conc "DataShare dashboard " (current-user-name) ":" (current-directory))
    #:title (conc "DataShare dashboard " (current-user-name) ":" (current-directory))   
    #:menu (datashare:main-menu)
    (let* ((tabs (iup:tabs
		  #:tabchangepos-cb (lambda (obj curr prev)
				      (set! *datashare:current-tab-number* curr))
		  (datashare:publish-view configdat)
		  (datashare:get-view configdat)
		  (datashare:manage-view configdat)

    ;; Now do rollups for the toplevel tests
    ;;
    (db:delay-if-busy dbdat)
    (for-each
     (lambda (toptest)
       (let ((test-name (list-ref toptest 3)))
;;	     (run-id    (list-ref toptest 5)))
	 (db:top-test-set-per-pf-counts dbdat run-id test-name)))
	 (db:top-test-set-per-pf-counts dbstruct run-id test-name)))
     toplevels)))

(define (db:top-test-set-per-pf-counts dbdat run-id test-name)
  (db:general-call dbdat 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name))) 
(define (db:top-test-set-per-pf-counts dbstruct run-id test-name)
  (db:general-call (db:get-db dbstruct run-id) 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name))) 
 
		     
;; Clean out old junk and vacuum the database
;;
;; Ultimately do something like this:
;;
;; 1. Look at test records either deleted or part of deleted run:

	  (vector-ref inrec 2) ;; testname
	  (vector-ref inrec 4) ;; state
	  (vector-ref inrec 5) ;; status
	  -1 "" -1 -1 "" "-" 
	  (vector-ref inrec 3) ;; item-path
	  -1 "-" "-"))


(define (db:get-tests-for-run-state-status dbstruct run-id testpatt)
  (let* ((res            '())
	 (tests-match-qry (tests:match->sqlqry testpatt))
	 (qry             (conc "SELECT id,testname,item_path,state,status FROM tests WHERE run_id=? " 
				(if tests-match-qry (conc " AND (" tests-match-qry ") ") ""))))
    (debug:print-info 8 "db:get-tests-for-run qry=" qry)
    (db:with-db dbstruct run-id #f

	  (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime))))
     run-ids)))

;; set tests with state currstate and status currstatus to newstate and newstatus
;; use currstate = #f and or currstatus = #f to apply to any state or status respectively
;; WARNING: SQL injection risk. NB// See new but not yet used "faster" version below
;;
		;;  AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
		;;(debug:print 0 "QRY: " qry)
		;; (db:delay-if-busy)

;;  AND NOT (item_path='' AND testname in (SELECT DISTINCT testname FROM tests WHERE testname=? AND item_path != ''));")))
;;  (debug:print 0 "QRY: " qry)
;;  (db:delay-if-busy)
;;
;; NB// This call only operates on toplevel tests. Consider replacing it with more general call
;;
(define (db:set-tests-state-status dbstruct run-id testnames currstate currstatus newstate newstatus)
  (for-each (lambda (testname)
	      (let ((qry (conc "UPDATE tests SET state=?,status=? WHERE "
			       (if currstate  (conc "state='" currstate "' AND ") "")
			       (if currstatus (conc "status='" currstatus "' AND ") "")
			       " run_id=? AND testname LIKE ?;")))
		(db:with-db
		 dbstruct
		 run-id
		 #t
		 (lambda (db)
		   (let ((test-id (db:get-test-id dbstruct run-id testname "")))
		   (sqlite3:execute db qry newstate newstatus run-id testname)
		   (mt:process-triggers run-id test-id newstate newstatus)
		     (sqlite3:execute db qry newstate newstatus run-id testname)
		     (if test-id (mt:process-triggers run-id test-id newstate newstatus)))
		   ))))
	    testnames))

;; speed up for common cases with a little logic
;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
(define (db:test-set-state-status-by-id dbstruct run-id test-id newstate newstatus newcomment)

;; call with state = #f to roll up with out accounting for state/status of this item
;;
(define (db:roll-up-pass-fail-counts dbstruct run-id test-name item-path state status)
  (if (not (equal? item-path ""))
      (let ((dbdat (db:get-db dbstruct run-id)))
	;;	(db    (db:dbdat-get-db dbdat)))
	(db:general-call dbdat 'update-pass-fail-counts (list test-name test-name test-name))
	(db:top-test-set-per-pf-counts dbdat run-id test-name))))
	(db:top-test-set-per-pf-counts dbstruct run-id test-name))))
  
;;     (case (string->symbol status)
;;       ((RUNNING)  (db:general-call dbdat 'top-test-set-running (list test-name)))
;;       ((LAUNCHED) (db:general-call dbdat 'top-test-set (list "LAUNCHED" test-name)))
;;       ((ABORT INCOMPLETE) (db:general-call dbdat 'top-test-set (list status test-name))))
    
;;     (if (or (not state)

	;;
	'(top-test-set-per-pf-counts "UPDATE tests
                       SET state=CASE 
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE testname=?
                                                     AND item_path != '' 
                                                     AND status IN ('INCOMPLETE')
                                                     AND state in ('RUNNING','NOT_STARTED','LAUNCHED','REMOTEHOSTSTART')) > 0 THEN 'INCOMPLETE'
                                                     AND state in ('RUNNING','NOT_STARTED','LAUNCHED','REMOTEHOSTSTART')) > 0 THEN 'RUNNING'
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE testname=?
                                                     AND item_path != '' 
                                                     AND status NOT IN ('TEN_STRIKES','BLOCKED')
                                                     AND state in ('RUNNING','NOT_STARTED','LAUNCHED','REMOTEHOSTSTART')) > 0 THEN 'RUNNING'
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE testname=?

                                         WHERE testname=?
                                              AND item_path != ''
                                              AND state IN ('BLOCKED','INCOMPLETE')) > 0 THEN 'FAIL'
                                  WHEN (SELECT count(id) FROM tests
                                         WHERE testname=?
                                              AND item_path != ''
                                              AND state NOT IN ('DELETED')
                                              AND status = 'ABORT') > 0 THEN 'ABORT'
                                              AND status IN ('INCOMPLETE','ABORT')) > 0 THEN 'ABORT'
                                  WHEN (SELECT count(id) FROM tests
                                         WHERE testname=?
                                              AND item_path != ''
                                              AND state NOT IN ('DELETED')
                                              AND status = 'AUTO') > 0 THEN 'AUTO'
                                  WHEN (SELECT count(id) FROM tests
                                         WHERE testname=?

;; M I S C   M A N A G E M E N T   I T E M S 
;;======================================================================

;; A routine to map itempaths using a itemmap
(define (db:compare-itempaths patha pathb itemmap)
  (debug:print-info 6 "ITEMMAP is " itemmap)
  (if itemmap
      (let ((path-b-mapped (db:convert-test-itempath pathb itemmap)))
	(debug:print-info 6 "ITEMMAP is " itemmap ", path: " pathb ", mapped path: " path-b-mapped)
	(equal? patha pathb))
      (equal? patha pathb)))

      (let* ((mapparts    (string-split itemmap))
	     (pattern     (car mapparts))
	     (replacement (if (> (length mapparts) 1) (cadr mapparts) "")))
	(if replacement
	    (equal? (string-substitute pattern replacement patha)
		    (string-substitute pattern replacement pathb))
	    (equal? (string-substitute pattern "" patha)
		    (string-substitute pattern "" pathb))))
      (equal? patha pathb)))
;; (let* ((mapparts    (string-split itemmap))
;; 	     (pattern     (car mapparts))
;; 	     (replacement (if (> (length mapparts) 1) (cadr mapparts) "")))
;; 	(if replacement
;; 	    (equal? (string-substitute pattern replacement patha)
;; 		    (string-substitute pattern replacement pathb))
;; 	    (equal? (string-substitute pattern "" patha)
;; 		    (string-substitute pattern "" pathb))))

;; A routine to convert test/itempath using a itemmap
(define (db:convert-test-itempath path-in itemmap)
  (debug:print-info 6 "ITEMMAP is " itemmap)
  (let* ((path-parts  (string-split path-in "/"))
	 (test-name   (if (null? path-parts) "" (car path-parts)))
	 (item-path   (string-intersperse (if (null? path-parts) '() (cdr path-parts)) "/")))
    (conc test-name "/" 
	  (db:multi-pattern-apply item-path itemmap))))

;; patterns are:
;;    "rx1"  "replacement1"\n
;;    "rx2"  "replacement2"
;; etc.
;;
(define (db:multi-pattern-apply item-path itemmap)
  (let ((all-patts (string-split itemmap "\n")))
    (if (null? all-patts)
	item-path
	(let loop ((hed (car all-patts))
		   (tal (cdr all-patts))
		   (res item-path))
	  (let* ((parts (string-split hed))
		 (patt  (car parts))
		 (repl  (if (> (length parts) 1)(cadr parts) ""))
		 (newr  (if (and patt repl)
			    (string-substitute patt repl res)
			    (begin
			      (debug:print 0 "WARNING: itemmap has problem \"" itemmap "\", patt: " patt ", repl: " repl)
			      res))))
	    (if (null? tal)
		newr
		(loop (car tal)(cdr tal) newr)))))))

;; the new prereqs calculation, looks also at itempath if specified
;; all prereqs must be met:
;; all prereqs must be met
;;    if prereq test with itempath='' is COMPLETED and PASS, WARN, CHECK, or WAIVED then prereq is met
;;    if prereq test with itempath=ref-item-path and COMPLETED with PASS, WARN, CHECK, or WAIVED then prereq is met
;;
;; Note: mode 'normal means that tests must be COMPLETED and ok (i.e. PASS, WARN, CHECK, SKIP or WAIVED)
;;       mode 'toplevel means that tests must be COMPLETED only
;;       mode 'itemmatch or 'itemwait means that tests items must be COMPLETED and (PASS|WARN|WAIVED|CHECK) [[ NB// NOT IMPLEMENTED YET ]]
;; 

launcher bsub
# if defined and not "no" flexi-launcher will bypass launcher unless there is no
# match.
flexi-launcher yes
------------------------

Tricks
------
======

This section is a compendium of a various useful tricks for debugging,
configuring and generally getting the most out of Megatest.

Limiting your running jobs
--------------------------

# if defined and not "no" flexi-launcher will bypass launcher unless there is no
# match.
flexi-launcher yes</pre>
</div></div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_tricks">Tricks</h2>
<h1 id="_tricks">Tricks</h1>
<div class="sectionbody">
<div class="paragraph"><p>This section is a compendium of a various useful tricks for debugging,
configuring and generally getting the most out of Megatest.</p></div>
</div>
</div>
<div class="sect1">
<h2 id="_limiting_your_running_jobs">Limiting your running jobs</h2>
<div class="sectionbody">
<div class="paragraph"><p>The following example will limit a test in the jobgroup "group1" to no more than 10 tests simultaneously.</p></div>
<div class="paragraph"><p>In your testconfig:</p></div>
<div class="listingblock">
<div class="content monospaced">

<div class="sect3">
<h4 id="_launchers">launchers</h4>
<div class="listingblock">
<div class="title">test/itempath &#8658; host-type</div>
<div class="content monospaced">
<pre>runfirst/sum% remote</pre>
</div></div>
</div>
<div class="sect3">
<h4 id="_miscellaneous_setup_items">Miscellaneous Setup Items</h4>
<div class="paragraph"><p>Attempt to rerun tests in "STUCK/DEAD", "n/a", "ZERO_ITEMS" states.</p></div>
<div class="listingblock">
<div class="title">In megatest.config</div>
<div class="content monospaced">
<pre>[setup]
reruns 5</pre>
</div></div>
</div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_the_testconfig_file">The testconfig File</h2>
<div class="sectionbody">

<h4 id="_skip_if_test_ran_more_recently_than_specified_time">Skip if test ran more recently than specified time</h4>
<div class="listingblock">
<div class="title">Skip if this test has been run in the past fifteen minutes and 15 seconds.</div>
<div class="content monospaced">
<pre>[skip]
rundelay 15m 15s</pre>
</div></div>
</div>
<div class="sect3">
<h4 id="_disks">Disks</h4>
<div class="paragraph"><p>A disks section in testconfig will override the disks section in
megatest.config. This can be used to allocate disks on a per-test or per item
basis.</p></div>
</div>
<div class="sect3">
<h4 id="_controlled_waiver_propagation">Controlled waiver propagation</h4>
<div class="paragraph"><p>If test is FAIL and previous test in run with same MT_TARGET is WAIVED then apply the following rules from the testconfig:
If a waiver check is specified in the testconfig apply the check and if it passes then set this FAIL to WAIVED</p></div>
<div class="paragraph"><p>Waiver check has two parts, 1) a list of waiver, rulename, filepatterns and 2) the rulename script spec (note that "diff" and "logpro" are predefined)</p></div>
<div class="listingblock">

# This builtin rule is applied if a <waivername>.logpro file exists
# logpro diff %file1% %file2% | logpro %waivername%.logpro %waivername%.html</pre>
</div></div>
</div>
</div>
<div class="sect2">
<h3 id="_ezsteps">Ezsteps</h3>
<div class="listingblock">
<div class="title">Example ezsteps with logpro rules</div>
<div class="content monospaced">
<pre>[ezsteps]
lookittmp   ls /tmp

[logpro]
lookittmp ;; Note: config file format supports multi-line entries where leading whitespace is removed from each line
  ;;     a blank line indicates the end of the block of text
  (expect:required in "LogFileBody" &gt; 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)</pre>
</div></div>
<div class="paragraph"><p>To transfer the environment to the next step you can do the following:</p></div>
<div class="listingblock">
<div class="content monospaced">
<pre>$MT_MEGATEST -env2file .ezsteps/${stepname}</pre>
</div></div>
</div>
<div class="sect2">

</div>
</div>
<div id="footnotes"><hr></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br>
Last updated
 2015-07-07 22:48:26 MST
 2015-08-24 19:48:43 MST
</div>
</div>
</body>
</html>

launchers
^^^^^^^^^
.test/itempath => host-type
------------
runfirst/sum% remote
------------

Miscellaneous Setup Items
^^^^^^^^^^^^^^^^^^^^^^^^^

Attempt to rerun tests in "STUCK/DEAD", "n/a", "ZERO_ITEMS" states.

.In megatest.config
------------------
[setup]
reruns 5
------------------

The testconfig File
-------------------

Setup section
~~~~~~~~~~~~~

.Skip if this test has been run in the past fifteen minutes and 15 seconds.
-----------------
[skip]
rundelay 15m 15s
-----------------

Disks
^^^^^

A disks section in testconfig will override the disks section in
megatest.config. This can be used to allocate disks on a per-test or per item
basis.

Controlled waiver propagation
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

If test is FAIL and previous test in run with same MT_TARGET is WAIVED then apply the following rules from the testconfig:
If a waiver check is specified in the testconfig apply the check and if it passes then set this FAIL to WAIVED

Waiver check has two parts, 1) a list of waiver, rulename, filepatterns and 2) the rulename script spec (note that "diff" and "logpro" are predefined)

# This builtin rule is applied if a <waivername>.logpro file exists
# logpro diff %file1% %file2% | logpro %waivername%.logpro %waivername%.html
-----------------

Ezsteps
~~~~~~~

.Example ezsteps with logpro rules
-----------------
[ezsteps]
lookittmp   ls /tmp

[logpro]
lookittmp ;; Note: config file format supports multi-line entries where leading whitespace is removed from each line
  ;;     a blank line indicates the end of the block of text 
  (expect:required in "LogFileBody" > 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)

-----------------

To transfer the environment to the next step you can do the following:

----------------------------
$MT_MEGATEST -env2file .ezsteps/${stepname}	  
----------------------------

(define (launch:get-cmdinfo-assoc-list #!key (encoded-cmd #f))
  (let ((enccmd (if encoded-cmd encoded-cmd (getenv "MT_CMDINFO"))))
    (if enccmd
	(common:read-encoded-string enccmd)
	'())))


(define (launch:runstep ezstep run-id test-id exit-info m tal)
  (let* ((stepname  (car ezstep))  ;; do stuff to run the step
	 (stepinfo  (cadr ezstep))
	 (stepparts (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
	 (stepparms (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each 
	 (stepcmd   (list-ref stepparts 3))
	 (script    "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
	 (logpro-file (conc stepname ".logpro"))
	 (html-file   (conc stepname ".html"))
	 (logpro-used (file-exists? logpro-file)))
(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig)
  (let* ((stepname       (car ezstep))  ;; do stuff to run the step
	 (stepinfo       (cadr ezstep))
	 (stepparts      (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
	 (stepparms      (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each 
	 (stepcmd        (list-ref stepparts 3))
	 (script         "") ; "#!/bin/bash\n") ;; yep, we depend on bin/bash FIXME!!!\
	 (logpro-file    (conc stepname ".logpro"))
	 (html-file      (conc stepname ".html"))
	 (tconfig-logpro (configf:lookup testconfig "logpro" stepname))
	 (logpro-used    (file-exists? logpro-file)))

    (if (and tconfig-logpro
	     (not logpro-used)) ;; no logpro file found but have a defn in the testconfig
	(begin
	  (with-output-to-file logpro-file
	    (lambda ()
	      (print ";; logpro file extracted from testconfig\n"
		     ";;")
	      (print tconfig-logpro)))
	  (set! logpro-used #t)))
    
    ;; NB// can safely assume we are in test-area directory
    (debug:print 4 "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
		 " stepparms: " stepparms " stepcmd: " stepcmd)
    
    ;; ;; first source the previous environment
    ;; (let ((prev-env (conc ".ezsteps/" prevstep (if (string-search (regexp "csh") 
    ;;      							 (get-environment-variable "SHELL")) ".csh" ".sh"))))

				       (if (not (> (length ezstepslst) 0))
					   (debug:print 0 "ERROR: ezsteps defined but ezstepslst is zero length")
					   (let loop ((ezstep (car ezstepslst))
						      (tal    (cdr ezstepslst))
						      (prevstep #f))
					     ;; check exit-info (vector-ref exit-info 1)
					     (if (vector-ref exit-info 1)
						 (let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal)))
						 (let ((logpro-used (launch:runstep ezstep run-id test-id exit-info m tal testconfig)))
						   (if (and (steprun-good? logpro-used (vector-ref exit-info 2))
							    (not (null? tal)))
						       (loop (car tal) (cdr tal) stepname)))
						 (debug:print 4 "WARNING: a prior step failed, stopping at " ezstep))))))))
		 (monitorjob   (lambda ()
				 (let* ((start-seconds (current-seconds))
					(calc-minutes  (lambda ()

		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      ;; (if (and (not (equal? item-path ""))
	      ;;      (< (random (rmt:get-count-tests-running-for-testname run-id test-name)) 5))
	      (tests:summarize-items run-id test-id test-name #f)
	      (tests:summarize-test run-id test-id)) ;; don't force - just update if no
	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
	      )
	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area " 
			 work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
	    (if (not (vector-ref exit-info 1))
		(exit 4)))))))

;; set up the very basics needed for doing anything here.
(define (launch:setup-for-run #!key (force #f))
  ;; would set values for KEYS in the environment here for better support of env-override but 
  ;; have chicken/egg scenario. need to read megatest.config then read it again. Going to 
  ;; pass on that idea for now
  ;; special case
  (if (or force (not (hash-table? *configdat*)))  ;; no need to re-open on every call
      (begin
	(set! *configinfo* (or (if (get-environment-variable "MT_CMDINFO") ;; we are inside a test - do not reprocess configs
				   (let ((alistconfig (conc (get-environment-variable "MT_LINKTREE") "/"
							    (get-environment-variable "MT_TARGET")   "/"
							    (get-environment-variable "MT_RUNNAME")  "/"
							    ".megatest.cfg")))
							    ".megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
				     (if (file-exists? alistconfig)
					 (list (configf:read-alist alistconfig)
					       (get-environment-variable "MT_RUN_AREA_HOME"))
					 #f))
				   #f) ;; no config cached - give up
			       (let ((runname (or (args:get-arg "-runname")(args:get-arg ":runname"))))
				 (if runname (setenv "MT_RUNNAME" runname))

	    (begin
	      (if (not (file-exists? fulldir))
		  (create-directory fulldir #t)) ;; need to protect with exception handler 
	      (if (and target
		       runname
		       (file-exists? fulldir))
		  (let ((tmpfile  (conc fulldir "/.megatest.cfg." (current-seconds)))
			(targfile (conc fulldir "/.megatest.cfg")))
			(targfile (conc fulldir "/.megatest.cfg-"  megatest-version "-" megatest-fossil-hash)))
		    (debug:print-info 0 "Caching megatest.config in " fulldir "/.megatest.cfg")
		    (configf:write-alist *configdat* tmpfile)
		    (system (conc "ln -sf " tmpfile " " targfile))
		    )))))))

(define (get-best-disk confdat)
  (let* ((disks    (hash-table-ref/default confdat "disks" #f))
(define (get-best-disk confdat testconfig)
  (let* ((disks   (or (and testconfig (hash-table-ref/default testconfig "disks" #f))
		      (hash-table-ref/default confdat "disks" #f)))
	 (minspace (let ((m (configf:lookup confdat "setup" "minspace")))
		     (string->number (or m "10000")))))
    (if disks 
	(let ((res (common:get-disk-with-most-free-space disks minspace))) ;; min size of 1000, seems tad dumb
	  (if res
	      (cdr res)
	      (begin

	  (debug:print-info 0 "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	  (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record

    ;; prevent overlapping actions - set to LAUNCHED as early as possible
    ;;
    (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
    (rmt:roll-up-pass-fail-counts run-id test-name item-path #f "LAUNCHED")
    (set! diskpath (get-best-disk *configdat*))
    (set! diskpath (get-best-disk *configdat* test-conf))
    (if diskpath
	(let ((dat  (create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	  (set! work-area (car dat))
	  (set! toptest-work-area (cadr dat))
	  (debug:print-info 2 "Using work area " work-area))
	(begin
	  (set! work-area (conc test-path "/tmp_run"))

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1,1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6019)
(define megatest-version 1.6023)

    (let ((tl (launch:setup-for-run)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))
	;; keep this one local
	(cond
	 ((and (args:get-arg "-section")
	       (args:get-arg "-var"))
	  (let ((val (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))))
	  (let ((val (or (configf:lookup data (args:get-arg "-section")(args:get-arg "-var"))
			 (configf:lookup data "default" (args:get-arg "-var")))))
	    (if val (print val))))
	 ((not (args:get-arg "-dumpmode"))
	  (pp (hash-table->alist data)))
	 ((string=? (args:get-arg "-dumpmode") "json")
	  (json-write data))
	 (else
	  (debug:print 0 "ERROR: -dumpmode of " (args:get-arg "-dumpmode") " not recognised")))

;;       (client:launch))
;;     (client:launch))

(define *runremote* #f)
(define *windows* (make-hash-table))
(define *changed-main* (make-hash-table)) ;; set path/... => #t
(define *changed-mutex* (make-mutex))     ;; use for all incoming change requests
(define *searchpatts*   (make-hash-table))

(debug:setup)

(define *tim* (iup:timer))
(define *ord* #f)

(iup:attribute-set! *tim* "TIME" 300)

		     #f                ;; redraw needed for current tab id
		     (make-hash-table) ;; tab-id -> areaname
		     )))
    (hash-table-set! *windows* window-id data)
    (iup:show (dashboard:main-panel data window-id))
    (iup:main-loop)))



;; ease debugging by loading ~/.dashboardrc
(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.dashboardrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

(define (main)
(let-values 
 (((con port)(dboard:server-start #f)))
 (let ((portnum   (if (string? port)(string->number port) port)))
   ;; got here, monitor/dashboard was started
   (mddb:register-dashboard portnum)
   (thread-start! (make-thread (lambda ()(dboard:server-service con portnum)) "server service"))
   (thread-start! (make-thread (lambda ()
				 (let loop ()
				   (dboard:general-updater con portnum)
				   (thread-sleep! 1)
				   (loop))) "general updater"))
   (dboard:make-window 0)
   (mddb:unregister-dashboard (get-host-name) portnum)
   (dboard:server-close con port)))
  (let-values 
      (((con port)(dboard:server-start #f)))
    (let ((portnum   (if (string? port)(string->number port) port)))
      ;; got here, monitor/dashboard was started
      (mddb:register-dashboard portnum)
      (thread-start! (make-thread (lambda ()(dboard:server-service con portnum)) "server service"))
      (thread-start! (make-thread (lambda ()
				    (let loop ()
				      (dboard:general-updater con portnum)
				      (thread-sleep! 1)
				      (loop))) "general updater"))
      (dboard:make-window 0)
      (mddb:unregister-dashboard (get-host-name) portnum)
      (dboard:server-close con port))))

;;
(define (rmt:roll-up-pass-fail-counts run-id test-name item-path state status)
  (rmt:send-receive 'roll-up-pass-fail-counts run-id (list run-id test-name item-path state status)))

(define (rmt:update-pass-fail-counts run-id test-name)
  (rmt:general-call 'update-pass-fail-counts run-id (list run-id test-name run-id test-name run-id test-name)))

(define (rmt:top-test-set-per-pf-counts run-id test-name)
  (rmt:general-call 'top-test-set-per-pf-counts run-id (list run-id test-name)))

;;======================================================================
;;  R U N S
;;======================================================================

(define (rmt:get-run-info run-id)
  (rmt:send-receive 'get-run-info run-id (list run-id)))

	 (test-records       (make-hash-table))
	 ;; need to process runconfigs before generating these lists
	 (all-tests-registry #f)  ;; (tests:get-all)) ;; (tests:get-valid-tests (make-hash-table) test-search-path)) ;; all valid tests to check waiton names
	 (all-test-names     #f)  ;; (hash-table-keys all-tests-registry))
	 (test-names         #f)  ;; (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;; Put fully qualified test/testpath names in this list to be done
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 (tdbdat             (tasks:open-db)))
	 (tdbdat             (tasks:open-db))
	 (config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       (if x (string->number x) #f))))

    ;; override the number of reruns from the configs
    (if (and config-reruns
	     (> run-count config-reruns))
	(set! run-count config-reruns))
    
    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))

    (let ((sighand (lambda (signum)
		     ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
		     (if (eq? signum signal/stop)
			 (debug:print 0 "ERROR: attempt to STOP process. Exiting."))
		     (set! *time-to-exit* #t)

						(else #f)))                           ;; not iterated
					     #f      ;; itemsdat 5
					     #f      ;; spare - used for item-path
					     )))
	    (for-each 
	     (lambda (waiton)
	       (if (and waiton (not (member waiton test-names)))
		   (let* ((new-test-patts  (tests:extend-test-patts test-patts hed waiton #f))
			  (waiton-record   (hash-table-ref/default test-records waiton #f))
		   (let* ((waiton-record   (hash-table-ref/default test-records waiton #f))
			  (waiton-tconfig  (if waiton-record (vector-ref waiton-record 1) #f))
			  (waiton-itemized (and waiton-tconfig
						(or (hash-table-ref/default waiton-tconfig "items" #f)
						    (hash-table-ref/default waiton-tconfig "itemstable" #f)))))
						    (hash-table-ref/default waiton-tconfig "itemstable" #f))))
			  (itemmap         (configf:lookup config "requirements" "itemmap"))
			  (new-test-patts  (tests:extend-test-patts test-patts hed waiton itemmap)))
		     (debug:print-info 0 "Test " waiton " has " (if waiton-record "a" "no") " waiton-record and" (if waiton-itemized " " " no ") "items")
		     ;; need to account for test-patt here, if I am test "a", selected with a test-patt of "hed/b%"
		     ;; and we are waiting on "waiton" we need to add "waiton/,waiton/b%" to test-patt
		     ;; is this satisfied by merely appending "/" to the waiton name added to the list?
		     ;;
		     ;; This approach causes all of the items in an upstream test to be run 

			   (if waiton-itemized
			       (begin
				 (debug:print-info 0 "New test patts: " new-test-patts ", prev test patts: " test-patts)
				 (set! required-tests (cons (conc waiton "/") required-tests))
				 (set! test-patts new-test-patts))
			       (begin
				 (debug:print-info 0 "Adding non-itemized test " waiton " to required-tests")
				 (set! required-tests (cons waiton required-tests)))))
				 (set! required-tests (cons waiton required-tests))
				 (set! test-patts new-test-patts))))
			 (begin
			   (debug:print-info 0 "No testconfig info yet for " waiton ", setting up to re-process it")
			   (set! tal (append (cons waiton tal)(list hed))))) ;; (cons (conc waiton "/") required-tests))
			 
		     ;; NOPE: didn't work. required needs to be plain test names. Try tacking on to test-patts
		     ;;  - doesn't work
		     ;; (set! test-patts (conc test-patts "," waiton "/"))

					  "runs: mark-incompletes")))
	    (thread-start! th1)
	    (thread-start! th2)
	    (thread-join! th1)
	    (set! keep-going #f)
	    (thread-join! th2)
	    ;; if run-count > 0 call, set -preclean and -rerun STUCK/DEAD
	    (if (> run-count 0)
	    (if (> run-count 0) ;; handle reruns
		(begin
		  (if (not (hash-table-ref/default flags "-preclean" #f))
		      (hash-table-set! flags "-preclean" #t))
		  (if (not (hash-table-ref/default flags "-rerun" #f))
		      (hash-table-set! flags "-rerun" "STUCK/DEAD,n/a,ZERO_ITEMS"))
		  ;; recursive call to self
		  (runs:run-tests target runname test-patts user flags run-count: (- run-count 1)))))

	 (tdbdat       (tasks:open-db))
	 (keys         (rmt:get-keys))
	 (rundat       (mt:get-runs-by-patt keys runnamepatt target))
	 (header       (vector-ref rundat 0))
	 (runs         (vector-ref rundat 1))
	 (states       (if state  (string-split state  ",") '()))
	 (statuses     (if status (string-split status ",") '()))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f))))
	 (state-status (if (string? new-state-status) (string-split new-state-status ",") '(#f #f)))
	 (rp-mutex     (make-mutex))
	 (bup-mutex    (make-mutex)))
    (debug:print-info 4 "runs:operate-on => Header: " header " action: " action " new-state-status: " new-state-status)
    (if (> 2 (length state-status))
	(begin
	  (debug:print 0 "ERROR: the parameter to -set-state-status is a comma delimited string. E.g. COMPLETED,FAIL")
	  (exit)))
    (for-each
     (lambda (run)

	   (debug:print-info 4 "runs:operate-on run=" run ", header=" header)
	   (if (not (null? tests))
	       (begin
		 (case action
		   ((remove-runs)
		    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    ;; seek and kill in flight -runtests with % as testpatt here
		    (if (equal? testpatt "%")
			(tasks:kill-runner target run-name)
			(debug:print 0 "not attempting to kill any run launcher processes as testpatt is " testpatt))
		    ;; (if (equal? testpatt "%")
		    (tasks:kill-runner target run-name testpatt)
		    ;; (debug:print 0 "not attempting to kill any run launcher processes as testpatt is " testpatt))
		    (debug:print 1 "Removing tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((set-state-status)
		    (if (tasks:need-server run-id)(tasks:start-and-wait-for-server tdbdat run-id 10))
		    (debug:print 1 "Modifying state and staus for tests for run: " runkey " " (db:get-value-by-header run header "runname")))
		   ((print-run)
		    (debug:print 1 "Printing info for run " runkey ", run=" run ", tests=" tests ", header=" header)
		    action)
		   ((run-wait)
		    (debug:print 1 "Waiting for run " runkey ", run=" runnamepatt " to complete"))
		   ((archive)
		    (debug:print 1 "Archiving/restoring (" (args:get-arg "-archive") ") data for run: " runkey " " (db:get-value-by-header run header "runname"))
		    (set! worker-thread (make-thread (lambda ()
						       (case (string->symbol (args:get-arg "-archive"))
							 ((save save-remove keep-html)(archive:run-bup (args:get-arg "-archive") run-id run-name tests))
							 ((restore)(archive:bup-restore (args:get-arg "-archive") run-id run-name tests))
							 ((save save-remove keep-html)(archive:run-bup (args:get-arg "-archive") run-id run-name tests rp-mutex bup-mutex))
							 ((restore)(archive:bup-restore (args:get-arg "-archive") run-id run-name tests rp-mutex bup-mutex))
							 (else 
							  (debug:print 0 "ERROR: unrecognised sub command to -archive. Run \"megatest\" to see help")
							  (exit))))
						     "archive-bup-thread"))
		    (thread-start! worker-thread))
		   (else
		    (debug:print-info 0 "action not recognised " action)))

     (handle-exceptions
      exn
      '()
      (sqlite3:first-row db "SELECT id,action,owner,state,target,name,testpatt,keylock,params WHERE
                               params LIKE ? AND state LIKE ? AND action LIKE ? AND testpatt LIKE ?;"
			 param-key state-patt action-patt test-patt)))))


(define (tasks:find-task-queue-records dbstruct target run-name test-patt state-patt action-patt)
  ;; (handle-exceptions
  ;;  exn
  ;;  '()
  ;;  (sqlite3:first-row
  (let ((db (db:delay-if-busy (db:get-db dbstruct #f)))
	(res '()))
    (sqlite3:for-each-row 
     (lambda (a . b)
       (set! res (cons (cons a b) res)))
     db "SELECT id,action,owner,state,target,name,testpatt,keylock,params FROM tasks_queue 
           WHERE
              target = ? AND name = ? AND state LIKE ? AND action LIKE ? AND testpatt LIKE ?;"
     target run-name state-patt action-patt test-patt)
    res)) ;; )

;; kill any runner processes (i.e. processes handling -runtests) that match target/runname
;; 
;; do a remote call to get the task queue info but do the killing as self here.
;;
(define (tasks:kill-runner target run-name)
  (let ((records    (rmt:tasks-find-task-queue-records target run-name "%" "running" "run-tests"))
(define (tasks:kill-runner target run-name testpatt)
  (let ((records    (rmt:tasks-find-task-queue-records target run-name testpatt "running" "run-tests"))
	(hostpid-rx (regexp "\\s+(\\w+)\\s+(\\d+)$"))) ;; host pid is at end of param string
    (if (null? records)
	(debug:print 0 "No run launching processes found for " target " / " run-name)
	(debug:print 0 "No run launching processes found for " target " / " run-name " with testpatt " (or testpatt "* no testpatt specified! *"))
	(debug:print 0 "Found " (length records) " run(s) to kill."))
    (for-each 
     (lambda (record)
       (let* ((param-key (list-ref record 8))
	      (match-dat (string-search hostpid-rx param-key)))
	 (if match-dat
	     (let ((hostname  (cadr match-dat))

  (delete-duplicates
   (filter (lambda (testname)
	     (tests:match test-patts testname #f))
	   test-names)))

;; given test-b that is waiting on test-a extend test-patt appropriately
;;
;;  genlib/testconfig               sim/testconfig
;;  genlib/sch                      sim/sch/cell1
;;
;;  [requirements]                  [requirements]
;;                                  mode itemwait
;;                                  # trim off the cell to determine what to run for genlib
;;                                  itemmap /.*
;;
;;                                  test-a is waiting on test-b so we need to create a pattern for test-b given test-a and itemmap
(define (tests:extend-test-patts test-patt test-b test-a itemmap)
  (let* ((patts      (string-split test-patt ","))
	 (test-b-len (+ (string-length test-b) 1))
	 (patts-b    (map (lambda (x)
			    (let* ((modpatt (if itemmap (db:convert-test-itempath x itemmap) x)) 
			    (let ((newpatt (conc test-a "/" (substring x test-b-len (string-length x)))))
				   (newpatt (conc test-a "/," test-a "/" (substring modpatt test-b-len (string-length modpatt)))))
			      ;; (print "in map, x=" x ", newpatt=" newpatt)
			      newpatt))
			  (filter (lambda (x)
				    (eq? (substring-index (conc test-b "/") x) 0))
				  patts))))
    (string-intersperse (delete-duplicates (append patts (if (null? patts-b)
							     (list (conc test-a "/%"))

	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(let ((script (configf:lookup *configdat* "testrollup" test-name)))
		  (print "Obtained lock for " outputfilename)
		  ;; (rmt:top-test-set-per-pf-counts run-id test-name)
		  (rmt:roll-up-pass-fail-counts run-id test-name "" #f #f)
		  (rmt:top-test-set-per-pf-counts run-id test-name)
		  (if script
		      (system (conc script " > " outputfilename " & "))
		      (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename))
		  (common:simple-file-release-lock lockf)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename))

[ezsteps]
delay    sleep $SPEED;echo "Delayed $SPEED seconds"

# lookup table for waitons
#
[std]
genlib    setup
test1     genlib
aggregate test1
test2     aggregate
results   test2

# simple removes the challenging "aggregate" dependency between test1 and test2.
# and the itempatt irregularity from genlib -> test1
#
[simple]
test1     setup
test2     test1
results   test2

[test_meta]
author matt
owner  matt
description This is a common testconfig shared by all the tests

[logpro]
delay ;; Delay step logpro
  (expect:required in "LogFileBody" > 0 "Delayed message" #/Delayed \d+ seconds/)

reviewed 09/10/2011, by Matt

[requirements]
mode itemwait

[itemstable]
VIEW   layout layout layout schematic schematic schematic
CELL   ntran  ptran  diode  ntran     ptran     diode

[fields]
# this field changes the dep tree 
DEPS  TEXT

# this field changes the test run time; 0 .. N or random
SPEED TEXT

[dashboard]
pre-command  xterm -geometry 180x20 -e "
post-command |& tee results.log ;echo Press any key to continue;bash -c 'read -n 1 -s'" &
testsort -event_time

[misc]
home #{shell readlink -f $MT_RUN_AREA_HOME}
parent #{shell readlink -f $MT_RUN_AREA_HOME/..}

[setup]
linktree #{get misc parent}/links
max_concurrent_jobs 100000
# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd arora

[env-override]
# MT_XTERM_CMD overrides the terminal command
# MT_XTERM_CMD xterm -bg lightgreen -fg black

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 #{get misc parent}/runs

#======================================================================
# Machine flavors
#
#   These specify lists of hosts or scripts to use or call for various
#   flavors of task.
#
#======================================================================

[flavors]

plain hosts: xena, phoebe
strong command: NBFAKE_HOST=zeus nbfake
arm hosts: cubian

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher nbfake
maxload 2.0

[default]

# [DEPS/SPEED]

[simple/0]

[std/0]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[requirements]
waiton #{get #{getenv DEPS} aggregate}

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[itemstable]
VIEWTYPE layout schematic

[requirements]
waiton #{get #{getenv DEPS} genlib}
# itemmap /.*

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[requirements]
waiton #{get #{getenv DEPS} results}

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[requirements]
waiton #{get #{getenv DEPS} test1}

# itemmap maps these items back to previous test
# NB// mapping is in reverse - NOT forwards!
#
itemmap /.*

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[requirements]
waiton #{get #{getenv DEPS} test2}

[ezsteps]
delay    sleep $SPEED;echo "Delayed $SPEED seconds"

[requirements]
#{getenv WAITON_#{getenv MT_TEST_NAME}}

[test_meta]
author matt
owner  matt
description This is a common testconfig shared by all the tests

[logpro]
delay ;; Delay step logpro
  (expect:required in "LogFileBody" > 0 "Delayed message" #/Delayed \d+ seconds/)

reviewed 09/10/2011, by Matt

[itemstable]
VIEW   layout layout layout schematic schematic schematic
CELL   ntran  ptran  diode  ntran     ptran     diode

[fields]
# this field changes the dep tree 
DEPS  TEXT

# this field changes the test run time; 0 .. N or random
SPEED TEXT

[dashboard]
pre-command  xterm -geometry 180x20 -e "
post-command |& tee results.log ;echo Press any key to continue;bash -c 'read -n 1 -s'" &
testsort -event_time

[misc]
home #{shell readlink -f $MT_RUN_AREA_HOME}
parent #{shell readlink -f $MT_RUN_AREA_HOME/..}

[setup]
linktree #{get misc parent}/links
max_concurrent_jobs 100000
# It is possible (but not recommended) to override the rsync command used
# to populate the test directories. For test development the following 
# example can be useful
#
testcopycmd cp --remove-destination -rsv TEST_SRC_PATH/. TEST_TARG_PATH/. >> TEST_TARG_PATH/mt_launch.log 2>> TEST_TARG_PATH/mt_launch.log

# or for hard links

# testcopycmd cp --remove-destination -rlv TEST_SRC_PATH/. TEST_TARG_PATH/.

# override the logview command
#
logviewer (%MTCMD%) 2> /dev/null > /dev/null

# override the html viewer launch command
#
# htmlviewercmd firefox -new-window 
htmlviewercmd arora

[env-override]
# MT_XTERM_CMD overrides the terminal command
# MT_XTERM_CMD xterm -bg lightgreen -fg black

## disks are:
## name host:/path/to/area
## -or-
## name /path/to/area
[disks]
disk0 #{get misc parent}/runs

#======================================================================
# Machine flavors
#
#   These specify lists of hosts or scripts to use or call for various
#   flavors of task.
#
#======================================================================

[flavors]

plain hosts: xena, phoebe
strong command: NBFAKE_HOST=zeus nbfake
arm hosts: cubian

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher nbfake
maxload 2.0

[default]
WAITON_setup
WAITON_genlib    waiton setup
WAITON_test1     waiton genlib
WAITON_aggregate waiton test1
WAITON_test2     waiton aggregate

# [DEPS/SPEED]

[std/0]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[itemstable]
VIEWTYPE layout schematic

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common.testconfig]

[include #{getenv MT_RUN_AREA_HOME}/common_itemstable.testconfig]

# You can override environment variables for all your tests here
[env-override]
EXAMPLE_VAR example value

# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{scheme (nice-path "#{getenv MT_RUN_AREA_HOME}/../simpleruns")}
disk0 #{scheme (create-directory (nice-path "#{getenv MT_RUN_AREA_HOME}/../simpleruns") #t)}

pre-command  xterm -geometry 180x20 -e "
post-command |& tee results.log ;echo Press any key to continue;bash -c 'read -n 1 -s'" &
testsort -event_time

[misc]
home #{shell readlink -f $MT_RUN_AREA_HOME}
parent #{shell readlink -f $MT_RUN_AREA_HOME/..}
testsuite #{shell basename $MT_RUN_AREA_HOME}

[tests-paths]
1 #{get misc parent}/simplerun/tests

[setup]

# turn off faststart, put monitor.db in MT_RUN_AREA_HOME/db

# XTERM   [system xterm]
# RUNDEAD [system exit 56]

[server]

# force use of server always
required yes
# required yes

# Use http instead of direct filesystem access
transport http
# transport fs
# transport nmsg

synchronous 0

# If the server can't be started on this port it will try the next port until
# it succeeds
port 9080

# This server will keep running this number of hours after last access. 
# Three minutes is 0.05 hours
# timeout 0.025
timeout 0.061
timeout 0.01

# faststart; unless no, start server but proceed with writes until server started
faststart no
# faststart yes
# faststart no
faststart yes

# Start server when average query takes longer than this
# server-query-threshold 55500
server-query-threshold 1000
timeout 0.01

# daemonize yes
# hostname #{scheme (get-host-name)}

## disks are:
## name host:/path/to/area
## -or-

#  <testsuite>/<creationdate>
# Within the archive the data is structured like this:
#  <target>/<runname>/<test>/
disk0 /tmp/#{getenv USER}/adisk1

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
# launcher #{ scheme (case (string->symbol (conc (getenv "datapath"))) \
#                         ((none) "nbfake") \
#                         ((openlava) "bsub") \
#                         (else "sleeprunner"))}
launcher #{scheme (case (string->symbol (conc (getenv "datapath"))) \
                         ((none) "nbfake") \
                         ((openlava) "bsub -o $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.log") \
                         ((sleeprunner) "sleeprunner") \
                         (else "nbfake"))}

# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

# launcher #{shell if which bsub > /dev/null;then echo bsub -q priority -o openlava.log;else echo sleeprunner;fi}
launcher nbfake
# launcher nbfake

[configf:settings trim-trailing-spaces yes]

# Override the rollup for specific tests
[testrollup]
runfirst ls

[test]
# VAL1 has trailing spaces
VAL1 Foo    
VAL2 ==>#{get test VAL1}Bar<== no spaces between Foo and Bar to pass

ltest #{scheme (case (string->symbol (conc (getenv "datapath"))) \
                        ((none) "nbfake") \
                        ((openlava) "bsub") \
                        ((openlava) "bsub -o $MT_LINKTREE/$MT_TARGET/$MT_RUNNAME.$MT_TESTNAME-$MT_ITEM_PATH.log") \
                        (else "sleeprunner"))}

#================================================================
# Flexi-launcher
#================================================================
#
# [host-types]

# flexi-launcher yes  

[jobtools]
flexi-launcher yes

[host-types]
general nbfake
alt     #{get jobtools launcher}
local   nbfake
remote  bsub
remote  #{get jobtools launcher}

[launchers]
runfirst/sum% remote

%             general

(require-library margs)
(load "../../common.scm")
(load "../../common_records.scm")
(load "../../margs.scm")
(load "../../megatest-version.scm")
(load "../../portlogger.scm")
(load "../../tasks.scm")
(load "../../db.scm")
(load "../../configf.scm")
(load "../../keys.scm")
(load "../../tree.scm")
(load "../../multi-dboard.scm")

#!/bin/bash

csi -I ../.. multi-dboard-load-all.scm

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(expect:required in "LogFileBody" > 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)

;; (expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error

[setup]

[ezsteps]
lookittmp   ls /tmp

[test_meta]
author matt
owner  bob
description This test runs two ezstep, the first of which is expected to fail using a simple logpro file.

[logpro]
lookittmp ;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
  ;;  
  ;;   License GPL.
  ;;
  (expect:required in "LogFileBody" > 0 "A file name that should never exist!" #/This is a awfully stupid file name that should never be found in the temp dir/)
  ;;
  ;; (expect:warning  in "LogFileBody"  = 0 "Any warning" #/WARNING/)
  ;; (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/.*/)) ;; force an error


tags logpro
reviewed 09/10/2011, by Matt

;; (c) 2006,2007,2008,2009 Matthew Welland matt@kiatoa.com
;;  
;;   License GPL.

(define logbody "LogFileBody")

(define pass-specs '( ;; testname num-expected max-runtime
		     ("setup"		        1  20)
		     ("test1/layout/ptran"      1  20)
		     ("test1/schematic/ptran"	1  20)
		     ("test2/layout/ptran"      1  20)
		     ("test2/schematic/ptran"   1  20)
		     ))

(define fail-specs '( ;; testname num-expected max-runtime
		     ))
		     
(define warn-specs   '())

(define nost-specs   '(
		       ))

(define (check-one-test estate estatus testname count runtime)
   (let* ((rxe      (regexp (conc "^\\s+Test: " testname "(\\(.*|\\s+)\\s+State: " estate "\\s+Status: " estatus "\\s+Runtime:\\s+(\\d+)s")))
	  (msg1     (conc testname " expecting count of " count))
	  (msg2     (conc testname " expecting runtime less than " runtime)))
     (expect:required in logbody = count msg1 rxe)
     ;;(expect:value    in logbody count < msg2 rxe)
     ))

;; Special cases
;;
(expect:ignore   in logbody >= 0  "db_sync test might not have run"  #/Test: db_sync/)
(expect:ignore   in logbody >= 0  "all_toplevel may not yet be done" #/Test: all_toplevel/)
(expect:error    in logbody =  0  "tests left in RUNNING state"      #/State: RUNNING/)
(expect:required in logbody =  1  "priority_2 is KILLED"             #/Test: priority_2\s+State: KILLED\s+Status: KILLED/)
(expect:required in logbody =  1  "priority_5 is either PASS or SKIP" #/Test: priority_5\s+State: COMPLETED\s+Status: (SKIP|PASS)/)
(expect:required in logbody =  1  "priority_7 is either PASS or SKIP" #/Test: priority_7\s+State: COMPLETED\s+Status: (SKIP|PASS)/)
(expect:required in logbody =  1  "testxz has 1 NOT_STARTED test"    #/Test: testxz\s+State: NOT_STARTED/)
(expect:required in logbody =  1  "no items"                         #/Test: no_items\s+State: NOT_STARTED\s+Status: ZERO_ITEMS/)
(expect:warning  in logbody =  1  "dynamic waiton"                   #/Test: dynamic_waiton/)
(expect:required in logbody = 29  "blocktestxz has 29 tests"         #/Test: blocktestxz/)

;; General cases
;;
(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "PASS" testdat))
 pass-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "FAIL" testdat))
 fail-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "COMPLETED" "WARN" testdat))
 warn-specs)

(for-each 
 (lambda (testdat)
   (apply check-one-test "NOT_STARTED" "PREQ_DISCARDED" testdat))
 nost-specs)

;; Catch all.
;;
(expect:error    in logbody = 0   "Tests not accounted for"     #/Test: /)


;; ;; define your hooks
;; (hook:first-error   "echo \"Error hook activated: #{escaped errmsg}\"")
;; (hook:first-warning "echo \"Got warning: #{escaped warnmsg}\"")
;; (hook:value "echo \"Value hook activated: expected=#{expected}, measured=#{measured}, tolerance=#{tolerance}, message=#{message}\"")
;; 
;; ;; first ensure your run at least started
;; ;;
;; (trigger "Init"     #/This is a header/)
;; (trigger "InitEnd"  #/^\s*$/)
;; (section "Init" "Init" "InitEnd")
;; 
;; (trigger "Body"     #/^.*$/) ;; anything starts the body
;; ;; (trigger "EndBody"  #/This had better never match/)
;; 
;; (section "Body"     "Body" "EndBody")
;; 
;; (trigger "Blah2"    #/^begin Blah2/)
;; (trigger "Blah2End" #/^end Blah2/)
;; (section "Blah2"    "Blah2" "Blah2End")
;; 
;; (expect:required in "Init"  = 1 "Header"      #/This is a header/)
;; (expect:required in "LogFileBody" > 0 "Something required but not found" #/This is required but not found/)
;; (expect:value    in "LogFileBody" 1.9 0.1 "Output voltage" #/Measured voltage output:\s*([\d\.\+\-e]+)v/)
;; (expect:value    in "LogFileBody" 0.5 0.1 "Output current" #/Measured output current:\s*([\d\.\+\-e]+)mA/)
;; (expect:value    in "LogFileBody" 110e9 2e9 "A big number (first)" #/Freq:\s*([\d\.\+\-e]+)\s+Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (second), hook not called" #/Freq:\s*([\d\.\+\-e]+)Hz/)
;; (expect:value    in "LogFileBody" 110e9 1e9 "A big number (never activated)" #/Freq:\s*([\d\.\+\-e]+)zH/)
;; 
;; ;; Using match number
;; (expect:value    in "LogFileBody" 1.9 0.1 "Time Voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; ;; Comparison instead of tolerance
;; (expect:value    in "LogFileBody" 1.9 >   "Time voltage" #/out: (\d+)\s+(\d+)/ match: 2)
;; 
;; (expect:ignore   in "Blah2" < 99 "FALSE ERROR" #/ERROR/)
;; (expect:ignore   in "Body"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
;; (expect:warning  in "Body"  = 0 "Any warning" #/WARNING/)
;; (expect:error    in "Body"  = 0 "ERROR BLAH"  (list #/ERROR/ #/error/)) ;; but disallow any other errors
;; 
;; ;(expect in "Init"  < 1 "Junk"        #/This is bogus/)

# test2 from the tests/Makefile

[var]
tname itemwait

[ezsteps]

# Set things up
cleansimple   $MTRUNNER $MTTESTDIR/dep-tests $MTPATH megatest -remove-runs -testpatt %             -target simple/0 -runname #{get var tname}
simple        $MTRUNNER $MTTESTDIR/dep-tests $MTPATH megatest -run         -testpatt test2/%/ptran -target simple/0 -runname #{get var tname}
simpleresults $MTRUNNER $MTTESTDIR/dep-tests $MTPATH megatest -list-runs #{get var name}           -target simple/0

(print "Waiting for server to be done, should be about 20 seconds")
(test "server stop" #f (let ((hostname (car  *runremote*))
			     (port     (cadr *runremote*)))
			 (tasks:kill-server #t hostname port server-pid 'http)
			 (open-run-close tasks:get-best-server tasks:open-db)))

;;======================================================================
;; M O R E   R E M O T E   C A L  L S
;;======================================================================

(test #f #f (rmt:set-tests-state-status 1 '("runfirst") "RUNNING" "WARN" "COMPLETED" "FAIL"))

;; (cdb:kill-server *runremote*)

;; (thread-join! th1 th2 th3)

;; ADD ME!!!! (db:get-prereqs-not-met *db* 1 '("runfirst") "" mode: 'normal)
;; ADD ME!!!! (rdb:get-tests-for-run *db* 1 "runfirst" #f '() '())

# Copyright 2013,2014 Matthew Welland.
# Copyright 2013-2015 Matthew Welland.
# 
#  This program is made available under the GNU GPL version 2.0 or
#  greater. See the accompanying file COPYING for details.
# 
#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.

# make PREFIX=/mfs/pkgs/chicken/chicken-core all

help :
	@echo You may need to do the following first:
	@echo
	@echo sudo apt-get install libreadline-dev
	@echo sudo apt-get install libwebkitgtk-dev libfreetype6-dev libx11-dev libxpm-dev libxmu-dev libxft-dev libgtk2.0-dev libgl1-mesa-dev libglu1-mesa-dev libpangox-1.0-dev bison
	@echo sudo apt-get install libwebkitgtk-dev libfreetype6-dev libx11-dev libxpm-dev libxmu-dev \
	           libxft-dev libgtk2.0-dev libgl1-mesa-dev libglu1-mesa-dev libpangox-1.0-dev bison \
                   libwebkitgtk-3.0-dev
	@echo   -- nb// adding monodevelop gets more packages of which some might be needed...
	@echo sudo apt-get install libmotif3
	@echo
	@echo For IUP set IUPBRANCH, currently $(IUPBRANCH)
	@echo You are using PREFIX=$(PREFIX)
	@echo You are using PROXY="$(PROXY)"
	@echo If needed set PROXY to host.dom:port
	@echo   http_proxy=$(http_proxy)
	@echo   PROX=$(PROX)
	@echo 
	@echo To make all do: make all
	@echo 
	@echo Note: might need to do CSC_OPTIONS='-C "-fPIC"' make

# FPIC=-C "-fPIC"
FPIC=-C "-fPIC"

# Put the installation here
ifeq ($(PREFIX),)
PREFIX=$(PWD)/target
endif

# Set this on the command line of your make call if needed: make PROXY=host.com:1234
PROXY=

# http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz
# http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz
# Select version of chicken, sqlite3 etc
CHICKEN_VERSION=4.10.0rc1
SQLITE3_VERSION=3080500
CHICKEN_VERSION=4.10.0
SQLITE3_VERSION=3081101
# http://www.sqlite.org/2014/sqlite-autoconf-3080500.tar.gz

# http://www.sqlite.org/2015/sqlite-autoconf-3081101.tar.gz
# Override IUPBRANCH to use other than trunk
IUPBRANCH=iup-3.10.1
IUPBRANCH=iup-3.15

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
     dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
     json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
     spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
     srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables

chicken-4.9.0.1.tar.gz :
	wget http://code.call-cc.org/releases/4.9.0/chicken-4.9.0.1.tar.gz

chicken-4.10.0rc1.tar.gz :
	wget http://code.call-cc.org/dev-snapshots/2015/06/07/chicken-4.10.0rc1.tar.gz

chicken-4.10.0.tar.gz :
	wget http://code.call-cc.org/releases/4.10.0/chicken-4.10.0.tar.gz

# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git

$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX)
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX) install

$(PREFIX)/lib/sqlite3.so : $(PREFIX)/bin/sqlite3
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) sqlite3

#======================================================================
# N  A N O M S G
#======================================================================

# https://github.com/nanomsg/nanomsg/releases/download/0.6-beta/nanomsg-0.6-beta.tar.gz
nanomsg-0.5-beta.tar.gz :
	wget http://download.nanomsg.org/nanomsg-0.5-beta.tar.gz
nanomsg-0.6-beta.tar.gz :
	wget http://download.nanomsg.org/nanomsg-0.6-beta.tar.gz

nanomsg-0.5-beta/COPYING : nanomsg-0.5-beta.tar.gz
	tar xfvz nanomsg-0.5-beta.tar.gz
nanomsg-0.6-beta/COPYING : nanomsg-0.6-beta.tar.gz
	tar xfvz nanomsg-0.6-beta.tar.gz

$(PREFIX)/bin/nanocat : nanomsg-0.5-beta/COPYING
	cd nanomsg-0.5-beta;./configure --prefix=$(PREFIX);make;make install
$(PREFIX)/bin/nanocat : nanomsg-0.6-beta/COPYING
	cd nanomsg-0.6-beta;./configure --prefix=$(PREFIX);make;make install

$(PREFIX)/lib/nanomsg.so : $(PREFIX)/bin/nanocat
	CSC_OPTIONS="-I$(PREFIX)/include -L$(PREFIX)/lib" $(CHICKEN_INSTALL) $(PROX) nanomsg

# LD_LIBRARY_PATH=/mfs/pkgs/chicken/4.10.0-amd64/lib CSC_OPTIONS="-I/mfs/pkgs/chicken/4.10.0-amd64/include -L/mfs/pkgs/chicken/4.10.0-amd64/lib -C \"-fPIC\"" /mfs/pkgs/chicken/4.10.0-amd64/bin/chicken-install  -D no-library-checks nanomsg

#======================================================================
# M A T T S   U T I L S
#======================================================================

# opensrc

ffcall/README : ffcall.fossil
	mkdir -p ffcall
	cd ffcall && if [ -e README ];then fossil update; else fossil open ../ffcall.fossil; fi

# NOTE: This worked fine *without* the enable-shared
#
$(PREFIX)/lib/libavcall.a : ffcall/README
	cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make && make install
	cd ffcall;./configure --prefix=$(PREFIX) --enable-shared && make CC="gcc -fPIC" && make install

iuplib.fossil :
	fossil clone http://www.kiatoa.com/fossils/iuplib iuplib.fossil

iup/installall.sh : iuplib.fossil
	mkdir -p iup
	cd iup && if [ -e installall.sh ];then fossil update $(IUPBRANCH); else fossil open ../iuplib.fossil;fossil update $(IUPBRANCH); fi

iup/alldone : iup/installall.sh $(PREFIX)/include/iup.h $(PREFIX)/lib/libiup.so
	cd iup && ./makeall.sh

$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh iup/alldone
	cd iup && ./installall.sh

# $(PREFIX)/lib/libiup.so : iup/iup/alldone
#	touch -c $(PREFIX)/lib/libiup.so

$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks iup

# -feature disable-iup-web

$(CHICKEN_EGG_DIR)/canvas-draw.so :  $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw


clean :
	rm -rf chicken-4.8.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)