Megatest

    ((http) (http:client-connect iface port))
    ((zmq)  (zmq:client-connect  iface port))
    (else   (rpc:client-connect  iface port))))

(define (client:setup areapath #!key (remaining-tries 100) (failed-connects 0))
  (case (server:get-transport)
    ((rpc) (rpc-transport:client-setup remaining-tries: remaining-tries failed-connects: failed-connects)) ;;(client:setup-rpc run-id))
    ((http)(client:setup-http areapath remaining-tries: remaining-tries failed-connects: failed-connects))
    (else  (rpc-transport:client-setup remaining-tries: remaining-tries failed-connects: failed-connects)))) ;; (client:setup-rpc run-id))))

;; Do all the connection work, look up the transport type and set up the
;; connection if required.
;;
;; There are two scenarios. 
;;   1. We are a test manager and we received *transport-type* and *runremote* via cmdline
;;   2. We are a run tests, list runs or other interactive process and we must figure out
;;      *transport-type* and *runremote* from the monitor.db
;;
;; client:setup
;;
;; lookup_server, need to remove *runremote* stuff
;;

(define (client:setup-http areapath #!key (remaining-tries 100) (failed-connects 0)(area-dat #f))
  (debug:print-info 2 *default-log-port* "client:setup remaining-tries=" remaining-tries)
  (server:start-and-wait areapath)
  (if (<= remaining-tries 0)
      (begin
	(debug:print-error 0 *default-log-port* "failed to start or connect to server")
	(exit 1))
      ;;
      ;; Alternatively here, we can get the list of candidate servers and work our way
      ;; through them searching for a good one.
      ;;
      (let* ((server-dat (server:get-rand-best areapath)) ;; (server:get-first-best areapath))
	     (runremote  (or area-dat *runremote*)))
	(if (not server-dat) ;; no server found
	    (client:setup-http areapath remaining-tries: (- remaining-tries 1))
	    (let ((host  (cadr  server-dat))
		  (port  (caddr server-dat)))
	      (debug:print-info 4 *default-log-port* "client:setup server-dat=" server-dat ", remaining-tries=" remaining-tries)
	      (if (and (not area-dat)
		       (not *runremote*))
		  (set! *runremote* (make-remote)))
	      (if (and host port)
		  (let* ((start-res (case *transport-type*
				      ((http)(http-transport:client-connect host port))))
			 (ping-res  (case *transport-type* 
				      ((http)(rmt:login-no-auto-client-setup start-res)))))
		    (if (and start-res
			     ping-res)
			(let ((runremote (or area-dat *runremote*))) ;; it might have been generated only a few statements ago
			  (remote-conndat-set! runremote start-res) ;; (hash-table-set! runremote run-id start-res)
			  (debug:print-info 2 *default-log-port* "connected to " (http-transport:server-dat-make-url start-res))
			  start-res)
			(begin    ;; login failed but have a server record, clean out the record and try again
			  (debug:print-info 0 *default-log-port* "client:setup, login unsuccessful, will attempt to start server ... start-res=" start-res ", server-dat=" server-dat) ;; had runid.  Fixes part of Randy;s ticket 1405717332
			  (case *transport-type* 
			    ((http)(http-transport:close-connections)))
			  (remote-conndat-set! runremote #f)  ;; (hash-table-delete! runremote run-id)
			  (thread-sleep! 1)
			  (client:setup-http areapath remaining-tries: (- remaining-tries 1))
			  )))
		  (begin    ;; no server registered
		    ;; (server:kind-run areapath)
		    (server:start-and-wait areapath)
		    (debug:print-info 0 *default-log-port* "client:setup, no server registered, remaining-tries=" remaining-tries)
		    (thread-sleep! 1) ;; (+ 5 (random (- 20 remaining-tries))))  ;; give server a little time to start up, randomize a little to avoid start storms.
		    (client:setup-http areapath remaining-tries: (- remaining-tries 1)))))))))

(define *db-api-call-time*    (make-hash-table)) ;; hash of command => (list of times)
;; no sync db
(define *no-sync-db*          #f)

;; SERVER
(define *my-client-signature* #f)
(define *transport-type*    'http)             ;; override with [server] transport http|rpc|nmsg
(define *runremote*         #f)                ;; if set up for server communication this will hold <host port>
;; (define *max-cache-size*    0)
(define *logged-in-clients* (make-hash-table))
(define *server-id*         #f)
(define *server-info*       #f)  ;; good candidate for easily convert to non-global
(define *time-to-exit*      #f)
(define *server-run*        #t)
(define *run-id*            #f)

				    (if (sqlite3:database? db)
					(begin
					  (sqlite3:interrupt! db)
					  (sqlite3:finalize! db #t)
					  ;; (vector-set! *task-db* 0 #f)
					  (set! *task-db* #f)))))
                              (http-client#close-all-connections!)
                              ;; (if (and *runremote*
                              ;;          (remote-conndat *runremote*))
                              ;;     (begin
                              ;;       (http-client#close-all-connections!))) ;; for http-client
                              (if (not (eq? *default-log-port* (current-error-port)))
                                  (close-output-port *default-log-port*))
			      (set! *default-log-port* (current-error-port))) "Cleanup db exit thread"))
	  (th2 (make-thread (lambda ()
			      (debug:print 4 *default-log-port* "Attempting clean exit. Please be patient and wait a few seconds...")
			      (if no-hurry
                                  (begin

  (server-timeout    #f) ;; (exec-fn 'server:expiration-timeout))
  (force-server      #f)
  (ro-mode           #f)  
  (ro-mode-checked   #f) ;; flag that indicates we have checked for ro-mode
  (ulex:conn         #f) ;; ulex db conn is not exactly a db connector, more like a network connector 
  )





























;; Some of these routines use:
;;
;;     http://www.cs.toronto.edu/~gfb/scheme/simple-macros.html
;;
;; Syntax for defining macros in a simple style similar to function definiton,
;;  when there is a single pattern for the argument list and there are no keywords.

	      (print-call-chain *default-log-port*)
	      (debug:print-error 0 *default-log-port* " closing connection failed with error: " ((condition-property-accessor 'exn 'message) exn)))
	    (close-connection! api-dat)
            ;;(close-idle-connections!)
	    #t))
	#f)))


(define (make-http-transport:server-dat)(make-vector 6))
(define (http-transport:server-dat-get-iface         vec)    (vector-ref  vec 0))
(define (http-transport:server-dat-get-port          vec)    (vector-ref  vec 1))
(define (http-transport:server-dat-get-api-uri       vec)    (vector-ref  vec 2))
(define (http-transport:server-dat-get-api-url       vec)    (vector-ref  vec 3))
(define (http-transport:server-dat-get-api-req       vec)    (vector-ref  vec 4))
(define (http-transport:server-dat-get-last-access   vec)    (vector-ref  vec 5))
(define (http-transport:server-dat-get-socket        vec)    (vector-ref  vec 6))

(define (http-transport:server-dat-make-url vec)
  (if (and (http-transport:server-dat-get-iface vec)
	   (http-transport:server-dat-get-port  vec))
      (conc "http://" 
	    (http-transport:server-dat-get-iface vec)
	    ":"
	    (http-transport:server-dat-get-port  vec))
      #f))

(define (http-transport:server-dat-update-last-access vec)
  (if (vector? vec)
      (vector-set! vec 5 (current-seconds))
      (begin
	(print-call-chain (current-error-port))
	(debug:print-error 0 *default-log-port* "call to http-transport:server-dat-update-last-access with non-vector!!"))))

;;
;; connect
;;
(define (http-transport:client-connect iface port)
  (let* ((api-url      (conc "http://" iface ":" port "/api"))
	 (api-uri      (uri-reference (conc "http://" iface ":" port "/api")))

(declare (uses server))
(declare (uses client))
(declare (uses tests))
(declare (uses genexample))
;; (declare (uses daemon))
(declare (uses db))
;; (declare (uses dcommon))




(declare (uses tdb))
(declare (uses mt))
(declare (uses api))
(declare (uses tasks)) ;; only used for debugging.
(declare (uses env))
(declare (uses diff-report))

;;
;;  grep define ../rmt.scm | grep rmt: |perl -pi -e 's/\(define\s+\((\S+)\W.*$/\1/'|sort -u

;;======================================================================
;;  S U P P O R T   F U N C T I O N S
;;======================================================================

;; if a server is either running or in the process of starting call client:setup
;; else return #f to let the calling proc know that there is no server available
;;
(define (rmt:get-connection-info areapath #!key (area-dat #f)) ;; TODO: push areapath down.
  (let* ((runremote (or area-dat *runremote*))
	 (cinfo     (if (remote? runremote)
			(remote-conndat runremote)
			#f)))
	  (if cinfo
	      cinfo
	      (if (server:check-if-running areapath)
		  (client:setup areapath)
		  #f))))

(define *send-receive-mutex* (make-mutex)) ;; should have separate mutex per run-id



;; this entry point can decide based on cmd whether to dispatch to old api calls via remote or via ulex
;;
(define (rmt:send-receive cmd rid params #!key (attemptnum 1)(area-dat #f))
  (let* ((areapath      *toppath*);; TODO - resolve from dbstruct to be compatible with multiple areas
	 (runremote     (or area-dat
			    *runremote*)))
    ;; ensure we have a record for our connection for given area
    (if (not runremote)                   ;; can remove this one. should never get here.         
	(begin
	  (set! *runremote* (make-remote))
	  (set! runremote   *runremote*)
	  (remote-server-timeout-set! runremote (server:expiration-timeout))
	  (remote-hh-dat-set!         runremote (common:get-homehost ))
	  )) ;; new runremote will come from this on next iteration
    
    (if (member cmd '(blah))
      (begin
	(mutex-lock! *send-receive-mutex*)
	(if (not *runremote*)(set! *runremote* (make-remote)))
	(let ((ulex:conn (remote-ulex:conn *runremote*)))
	  (if (not ulex:conn)(remote-ulex:conn-set! *runremote* (rmtmod:setup-ulex areapath)))
	  (rmtmod:send-receive-ulex ulex:conn cmd rid params attemptnum area-dat)))
      (rmt:send-receive-orig *default-log-port* runremote *rmt-mutex* areapath *db-multi-sync-mutex* cmd rid params attemptnum: attemptnum area-dat: area-dat ro-queries: api:read-only-queries))))

;; RA => e.g. usage (rmt:send-receive 'get-var #f (list varname))
;;
;;  add multi-sync-mutex 
;;
(define (rmt:send-receive-orig log-port runremote rmt-mutex toppath multi-sync-mutex cmd rid params #!key (attemptnum 1)(area-dat #f)) ;; start attemptnum at 1 so the modulo below works as expected

  #;(common:telemetry-log (conc "rmt:"(->string cmd))
                        payload: `((rid . ,rid)
                                   (params . ,params)))
                          
  
  ;; do all the prep locked under the rmt-mutex
  ;;(mutex-lock! rmt-mutex)
  
  ;; 1. check if server is started IFF cmd is a write OR if we are not on the homehost, store in runremote
  ;; 2. check the age of the connections. refresh the connection if it is older than timeout-20 seconds.
  ;; 3. do the query, if on homehost use local access
  ;;
  (let* ((start-time    (current-seconds)) ;; snapshot time so all use cases get same value

	 (readonly-mode (rmtmod:calc-ro-mode runremote toppath)))

    ;; ensure we have a homehost record

    (if (not (pair? (remote-hh-dat runremote)))  ;; not on homehost
	(remote-hh-dat-set! runremote (common:get-homehost)))
    
    ;;(print "BB> readonly-mode is "readonly-mode" dbfile is "dbfile)
    (cond
     ;; give up if more than 15 attempts
     ((> attemptnum 15)
      (debug:print 0 log-port "ERROR: 15 tries to start/connect to server. Giving up.")
      (exit 1))

     ;; readonly mode, read request-  handle it - case 2
     ((and readonly-mode
           (member cmd api:read-only-queries)) 
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case 2")
      (rmt:open-qry-close-locally log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries)
      )

     ;; readonly mode, write request.  Do nothing, return #f
     (readonly-mode (extras-readonly-mode rmt-mutex log-port cmd params))

     ;; This block was for pre-emptively resetting the connection if there had been no communication for some time.
     ;; I don't think it adds any value. If the server is not there, just fail and start a new connection.
     ;; also, the expire-time calculation might not be correct. We want, time-since-last-server-access > (server:get-timeout)
     ;;
     ;; reset the connection if it has been unused too long
     ((and runremote
           (remote-conndat runremote)
	   (> (current-seconds) ;; if it has been more than server-timeout seconds since last contact, close this connection and start a new on
	      (+ (http-transport:server-dat-get-last-access (remote-conndat runremote))
		 (remote-server-timeout runremote))))
      (debug:print-info 0 log-port "Connection to " (remote-server-url runremote) " expired due to no accesses, forcing new connection.")
      (http-transport:close-connections area-dat: runremote)
      (remote-conndat-set! runremote #f) ;; invalidate the connection, thus forcing a new connection.
      ;; (mutex-unlock! rmt-mutex)
      (rmt:send-receive-orig log-port runremote rmt-mutex toppath multi-sync-mutex cmd rid params attemptnum: attemptnum))
     

     ;; on homehost and this is a read
     ((and (not (remote-force-server runremote)) ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))       ;; on homehost
           (member cmd api:read-only-queries))   ;; this is a read
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  5")
      (rmt:open-qry-close-locally log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries))

     ;; on homehost and this is a write, we already have a server, but server has died
     ((and (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote)             ;; have a server
           (not (server:ping (remote-server-url runremote))))  ;; server has died. NOTE: this is not a cheap call! Need better approach.
      (set! *runremote* (make-remote))
      (remote-force-server-set! runremote (common:force-server?))
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  6")
      (rmt:send-receive-orig log-port runremote rmt-mutex toppath  multi-sync-mutex cmd rid params attemptnum: attemptnum))

     ;; on homehost and this is a write, we already have a server
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; on homehost
           (not (member cmd api:read-only-queries))  ;; this is a write
           (remote-server-url runremote))            ;; have a server
      ;;(mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  4.1")
      (rmt:open-qry-close-locally  log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries))

     ;;  on homehost, no server contact made and this is a write, passively start a server 
     ((and (not (remote-force-server runremote))     ;; honor forced use of server, i.e. server NOT required
	   (cdr (remote-hh-dat runremote))           ;; have homehost
           (not (remote-server-url runremote))       ;; no connection yet
	   (not (member cmd api:read-only-queries))) ;; not a read-only query
      (debug:print-info 12 log-port "rmt:send-receive, case  8")
      (let ((server-url  (server:check-if-running toppath))) ;; (server:read-dotserver->url toppath))) ;; (server:check-if-running toppath))) ;; Do NOT want to run server:check-if-running - very expensive to do for every write call
	(if server-url
	    (remote-server-url-set! runremote server-url) ;; the string can be consumed by the client setup if needed
	    (if (common:force-server?)
		(server:start-and-wait toppath)
		(server:kind-run toppath))))
      (remote-force-server-set! runremote (common:force-server?))
      ;; (mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case  8.1")
      (rmt:open-qry-close-locally  log-port multi-sync-mutex cmd 0 params ro-queries: api:read-only-queries))

     ((or (and (remote-force-server runremote)              ;; we are forcing a server and don't yet have a connection to one
	       (not (remote-conndat runremote)))
	  (and (not (cdr (remote-hh-dat runremote)))        ;; not on a homehost 
	       (not (remote-conndat runremote))))           ;; and no connection
      (debug:print-info 12 log-port "rmt:send-receive, case 9, hh-dat: " (remote-hh-dat runremote) " conndat: " (remote-conndat runremote))
      ;;(mutex-unlock! rmt-mutex)
      (if (not (server:check-if-running toppath)) ;; who knows, maybe one has started up?
	  (server:start-and-wait toppath))
      (remote-conndat-set! runremote (rmt:get-connection-info toppath)) ;; calls client:setup which calls client:setup-http
      (rmt:send-receive-orig log-port runremote rmt-mutex toppath multi-sync-mutex cmd rid params attemptnum: attemptnum)) ;; TODO: add back-off timeout as

     ;; all set up if get this far, dispatch the query
     ((and (not (remote-force-server runremote))
	   (cdr (remote-hh-dat runremote))) ;; we are on homehost
      ;;(mutex-unlock! rmt-mutex)
      (debug:print-info 12 log-port "rmt:send-receive, case 10")
      (rmt:open-qry-close-locally  log-port multi-sync-mutex cmd (if rid rid 0) params ro-queries: api:read-only-queries))

     ;; not on homehost, do server query
     (else (extras-case-11 log-port runremote cmd params attemptnum rid)))))

;; bunch of small functions factored out of send-receive to make debug easier
;;

(define (extras-case-11 *default-log-port* runremote cmd params attemptnum rid)
  ;; (mutex-unlock! *rmt-mutex*)
  (debug:print-info 12 *default-log-port* "rmt:send-receive, case  9")
  ;; (mutex-lock! *rmt-mutex*)
  (let* ((conninfo (remote-conndat runremote))
	 (dat      (case (remote-transport runremote)
		     ((http) (condition-case ;; handling here has
					     ;; caused a lot of
					     ;; problems. However it
					     ;; is needed to deal with
					     ;; attemtped
					     ;; communication to
					     ;; servers that have gone
					     ;; away
			      (http-transport:client-api-send-receive 0 conninfo cmd params)
			      ((commfail)(vector #f "communications fail"))
			      ((exn)(vector #f "other fail" (print-call-chain)))))
		     (else
		      (debug:print 0 *default-log-port* "ERROR: transport " (remote-transport runremote) " not supported")
		      (exit))))
	 (success  (if (vector? dat) (vector-ref dat 0) #f))
	 (res      (if (vector? dat) (vector-ref dat 1) #f)))
    (if (and (vector? conninfo) (< 5 (vector-length conninfo)))
	(http-transport:server-dat-update-last-access conninfo) ;; refresh access time
	(begin
	  (debug:print 0 *default-log-port* "INFO: Should not get here! conninfo=" conninfo)
	  (set! conninfo #f)
	  (remote-conndat-set! *runremote* #f) ;; NOTE: *runremote* is global copy of runremote. Purpose: factor out global.
	  (http-transport:close-connections  area-dat: runremote)))
    (debug:print-info 13 *default-log-port* "rmt:send-receive, case  9. conninfo=" conninfo " dat=" dat " runremote = " runremote)
    (mutex-unlock! *rmt-mutex*)
    (if success ;; success only tells us that the transport was
	;; successful, have to examine the data to see if
	;; there was a detected issue at the other end
	(extras-transport-succeded *default-log-port* *rmt-mutex* attemptnum runremote res params rid cmd)
	(extras-transport-failed *default-log-port* *rmt-mutex* attemptnum runremote cmd rid params)
	)))

;; (define (rmt:update-db-stats run-id rawcmd params duration)
;;   (mutex-lock! *db-stats-mutex*)
;;   (handle-exceptions
;;    exn
;;    (begin
;;      (debug:print 0 *default-log-port* "WARNING: stats collection failed in update-db-stats")
;;      (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))

(define (rmt:test-set-archive-block-id run-id test-id archive-block-id)
  (rmt:send-receive 'test-set-archive-block-id run-id (list run-id test-id archive-block-id)))

(define (rmt:test-get-archive-block-info archive-block-id)
  (rmt:send-receive 'test-get-archive-block-info #f (list archive-block-id)))

(set-functions rmt:send-receive                       remote-server-url-set!
	       http-transport:close-connections	      remote-conndat-set!


	       debug:print                            debug:print-info
	       debug:print-error 
	       remote-ro-mode                         remote-ro-mode-set!
	       remote-ro-mode-checked-set!            remote-ro-mode-checked

	       #f                                     #f
	       api:execute-requests                   api:read-only-queries)

(declare (unit rmtmod))
(declare (uses commonmod))

(module rmtmod
	*
	
(import scheme chicken data-structures extras)
(import (prefix sqlite3 sqlite3:) posix typed-records srfi-18 srfi-69 format ports srfi-1)
(import commonmod)
(use (prefix ulex ulex:))

(include "common_records.scm")

;; Hack to make these functions visible to the refactored code, goal is to eliminate these over time.
(define (rmt:send-receive . params) #f)
(define (http-transport:close-connections . params) #f)
;; from remote defstruct in common.scm
(define (api:execute-requests . params) #f)









(define (set-functions send-receive        rsus
		       close-connections   rcs
		       dbgp                dbgpinfo

		       dbgperr
		       ro-mode             ro-mode-set
		       ro-mode-checked-set ro-mode-checked

		       dbfile-path         dbsetup
		       exec-req            read-only-queries
		       ) 
  (set! rmt:send-receive            send-receive)
  (set! remote-server-url-set!           rsus)
  (set! http-transport:close-connections close-connections)
  (set! remote-conndat-set!              rcs)
  ;; print stuff
  (set! debug:print                      dbgp)
  (set! debug:print-info                 dbgpinfo)
  (set! debug:print-error                dbgperr)
  ;;
  ;; db stuff for local db access
  (set! apt:execute-requests             exec-req)






  )

(define (rmt:open-qry-close-locally log-port multi-sync-mutex cmd run-id params #!key (ro-queries '())(remretries 5))
  (let* ((qry-is-write   (not (member cmd ro-queries)))
	 (db-file-path   (exec-fn 'db:dbfile-path)) ;;  0))
	 (dbstruct-local (exec-fn 'db:setup #t))  ;; make-dbr:dbstruct path:  dbdir local: #t)))
	 (read-only      (not (file-write-access? db-file-path)))
	 (start          (current-milliseconds))

(define (extras-readonly-mode rmt-mutex log-port cmd params)
  ;;(mutex-unlock! rmt-mutex)
  (debug:print-info 12 log-port "rmt:send-receive, case 3")
  (debug:print 0 log-port "WARNING: write transaction requested on a readonly area.  cmd="cmd" params="params)
  #f)

(define (extras-transport-failed log-port rmt-mutex attemptnum runremote cmd rid params)
  (debug:print 0 log-port "WARNING: communication failed. Trying again, try num: " attemptnum)
  ;;(mutex-lock! rmt-mutex)
  (remote-conndat-set!    runremote #f)
  (http-transport:close-connections area-dat: runremote)
  (remote-server-url-set! runremote #f)
  ;;(mutex-unlock! rmt-mutex)
  (debug:print-info 12 log-port "rmt:send-receive, case  9.1")
  (rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
  
(define (extras-transport-succeded log-port rmt-mutex attemptnum runremote res params rid cmd)
  (if (and (vector? res)
	   (eq? (vector-length res) 2)
	   (eq? (vector-ref res 1) 'overloaded)) ;; since we are
						 ;; looking at the
						 ;; data to carry the
						 ;; error we'll use a
						 ;; fairly obtuse

	(debug:print 0 log-port "WARNING: server is overloaded. Delaying " wait-delay " seconds and trying call again.")
	;;(mutex-lock! rmt-mutex)
	(http-transport:close-connections area-dat: runremote)
	;; (set! *runremote* #f) ;; force starting over
	(remote-server-url-set! runremote #f) ;; I am hoping this will force a redo on server connection. NOT TESTED
	;;(mutex-unlock! rmt-mutex)
	(thread-sleep! wait-delay)
	(rmt:send-receive cmd rid params attemptnum: (+ attemptnum 1)))
      res)) ;; All good, return res





















































































































































































;;======================================================================
;; ulex and steps stuff
;;======================================================================

(define (rmtmod:setup-ulex toppath)
  (ulex:make-area