Megatest

(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.megatestrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

;; Disabled help items
;;  -rollup                 : (currently disabled) fill run (set by :runname)  with latest test(s)
;;                            from prior runs with same keys
;;  -daemonize              : fork into background and disconnect from stdin/out

(define help (conc "
Megatest, documentation at http://www.kiatoa.com/fossils/megatest
  version " megatest-version "
  license GPL, Copyright Matt Welland 2006-2015

Usage: megatest [options]
  -h                      : this help
  -manual                 : show the Megatest user manual
  -version                : print megatest version (currently " megatest-version ")

Launching and managing runs
  -run                    : run all tests or as specified by -testpatt
  -remove-runs            : remove the data for a run, requires -runname and -testpatt
                            Optionally use :state and :status
  -set-state-status X,Y   : set state to X and status to Y, requires controls per -remove-runs
  -rerun FAIL,WARN...     : force re-run for tests with specificed status(s)
  -rerun-clean            : set all tests not COMPLETED+PASS,WARN,WAIVED to NOT_STARTED,n/a
                            and then run the specified testpatt with -preclean
  -rerun-all              : set all tests to NOT_STARTED,n/a and run with -preclean
  -lock                   : lock run specified by target and runname
  -unlock                 : unlock run specified by target and runname
  -set-run-status status  : sets status for run to status, requires -target and -runname
  -get-run-status         : gets status for run specified by target and runname
  -run-wait               : wait on run specified by target and runname
  -preclean               : remove the existing test directory before running the test
  -clean-cache            : remove the cached megatest.config and runconfigs.config files
  -no-cache               : do not use the cached config files. 

Selectors (e.g. use for -runtests, -remove-runs, -set-state-status, -list-runs etc.)
  -target key1/key2/...   : run for key1, key2, etc.
  -reqtarg key1/key2/...  : run for key1, key2, etc. but key1/key2 must be in runconfigs
  -testpatt patt1/patt2,patt3/...  : % is wildcard
  -runname                : required, name for this particular test run
  -state                  : Applies to runs, tests or steps depending on context
  -status                 : Applies to runs, tests or steps depending on context
  --modepatt key          : load testpatt from <key> in runconfigs instead of default TESTPATT if -testpatt and -tagexpr are not specified
  -tagexpr tag1,tag2%,..  : select tests with tags matching expression
  

Test helpers (for use inside tests)
  -step stepname
  -test-status            : set the state and status of a test (use :state and :status)
  -setlog logfname        : set the path/filename to the final log relative to the test
                            directory. may be used with -test-status
  -set-toplog logfname    : set the overall log for a suite of sub-tests

  -test-paths             : get the test paths matching target, runname, item and test
                            patterns.
  -list-disks             : list the disks available for storing runs
  -list-targets           : list the targets in runconfigs.config
  -list-db-targets        : list the target combinations used in the db
  -show-config            : dump the internal representation of the megatest.config file
  -show-runconfig         : dump the internal representation of the runconfigs.config file
  -dumpmode MODE          : dump in MODE format instead of sexpr, MODE=json,ini,sexp etc. (add -debug 0,9 to see which file contributes each line)
  -show-cmdinfo           : dump the command info for a test (run in test environment)
  -section sectionName
  -var varName            : for config and runconfig lookup value for sectionName varName
  -since N                : get list of runs changed since time N (Unix seconds)
  -fields fieldspec       : fields to include in json dump; runs:id,runame+tests:testname+steps
  -sort fieldname         : in -list-runs sort tests by this field
  -testdata-csv [categorypatt/]varpatt  : dump testdata for given category

Misc 
  -start-dir path         : switch to this directory before running megatest
  -contour cname          : add a level of hierarcy to the linktree and run paths
  -rebuild-db             : bring the database schema up to date
  -cleanup-db             : remove any orphan records, vacuum the db
  -import-megatest.db     : push data from megatest.db to cache db files in /tmp/$USER
  -sync-to-megatest.db    : pull data from cache files in /tmp/$USER to megatest.db
  -sync-to dest           : sync to new postgresql central style database
  -update-meta            : update the tests metadata for all tests
  -setvars VAR1=val1,VAR2=val2 : Add environment variables to a run NB// these are
                                 overwritten by values set in config files.
  -server -|hostname      : start the server (reduces contention on megatest.db), use
                            - to automatically figure out hostname
  -transport http|rpc     : use http or rpc for transport (default is http) 

  -log logfile            : send stdout and stderr to logfile
  -list-servers           : list the servers 

  -kill-servers           : kill all servers
  -repl                   : start a repl (useful for extending megatest)
  -load file.scm          : load and run file.scm
  -mark-incompletes       : find and mark incomplete tests
  -ping run-id|host:port  : ping server, exit with 0 if found
  -debug N|N,M,O...       : enable debug 0-N or N and M and O ...
  -config fname           : override the megatest.config file with fname
  -append-config fname    : append fname to the megatest.config file

Utilities
  -env2file fname         : write the environment to fname.csh and fname.sh
  -envcap a               : save current variables labeled as context 'a' in file envdat.db
  -envdelta a-b           : output enviroment delta from context a to context b to -o fname
                            set the output mode with -dumpmode csh, bash or ini
                            note: ini format will use calls to use curr and minimize path
  -refdb2dat refdb        : convert refdb to sexp or to format specified by s-dumpmode
                            formats: perl, ruby, sqlite3, csv (for csv the -o param
                            will substitute %s for the sheet name in generating 
                            multiple sheets)
  -o                      : output file for refdb2dat (defaults to stdout)
  -archive cmd            : archive runs specified by selectors to one of disks specified
                            in the [archive-disks] section.
                            cmd: keep-html, restore, save, save-remove

# Get test path, use '.' to get a single path or a specific path/file pattern
megatest -test-files 'logs/*.log' -target ubuntu/n%/no% -runname w49% -testpatt test_mt%

Called as " (string-intersperse (argv) " ") "
Version " megatest-version ", built from " megatest-fossil-hash ))

;;  -gui                    : start a gui interface
;;  -config fname           : override the runconfigs file with fname

;; process args
(define remargs (args:get-args 
		 (argv)
		 (list  "-runtests"  ;; run a specific test
			"-config"    ;; override the config file name
			"-append-config"
			"-execute"   ;; run the command encoded in the base64 parameter
			"-step"
			"-target"
			"-reqtarg"
			":runname"
			"-runname"
			":state"  
			"-state"
			":status"
			"-status"
			"-list-runs"
                        "-testdata-csv"
			"-testpatt"
                        "--modepatt"
                        "-tagexpr"
			"-itempatt"
			"-setlog"
			"-set-toplog"
			"-runstep"

			":expected"
			":tol"
			":units"
			;; misc
			"-start-dir"
			"-contour"
			"-server"

			"-transport"

			"-port"
			"-extract-ods"
			"-pathmod"
			"-env2file"
			"-envcap"
			"-envdelta"
			"-setvars"

			"-archive"
			"-since"
			"-fields"
			"-recover-test" ;; run-id,test-id - used internally to recover a test stuck in RUNNING state
			"-sort"
			"-target-db"
			"-source-db"
			"-prefix-target"

                        "-src-target"
                        "-src-runname"
                        "-diff-email"
			"-sync-to"			
			"-pgsync"
                        "-diff-html"
			)
 		 (list  "-h" "-help" "--help"
			"-manual"
			"-version"
		        "-force"
		        "-xterm"
		        "-showkeys"
		        "-show-keys"
		        "-test-status"
			"-set-values"
			"-load-test-data"
			"-summarize-items"
		        "-gui"
			"-daemonize"
			"-preclean"
			"-rerun-clean"
			"-rerun-all"
			"-clean-cache"
			"-no-cache"
			"-cache-db"
                        "-use-db-cache"
                        "-prepend-contour"
			;; misc
			"-repl"
			"-lock"
			"-unlock"
			"-list-servers"
			"-kill-servers"
                        "-run-wait"      ;; wait on a run to complete (i.e. no RUNNING)
			"-local"         ;; run some commands using local db access
                        "-generate-html"

			;; misc queries
			"-list-disks"
			"-list-targets"

			"-create-megatest-area"
			"-mark-incompletes"

			"-convert-to-norm"
			"-convert-to-old"
			"-import-megatest.db"
			"-sync-to-megatest.db"
			
			"-logging"
			"-v" ;; verbose 2, more than normal (normal is 1)
			"-q" ;; quiet 0, errors/warnings only

                        "-diff-rep"
                        )
		 args:arg-hash
		 0))

;; Add args that use remargs here
;;
(if (and (not (null? remargs))
	 (not (or
	       (args:get-arg "-runstep")
	       (args:get-arg "-envcap")
	       (args:get-arg "-envdelta")
	       )
	      ))
    (debug:print-error 0 *default-log-port* "Unrecognised arguments: " (string-intersperse (if (list? remargs) remargs (argv))  " ")))

;; before doing anything else change to the start-dir if provided
;;
(if (args:get-arg "-start-dir")
    (if (file-exists? (args:get-arg "-start-dir"))
        (let ((fullpath (common:real-path (args:get-arg "-start-dir"))))
          (setenv "PWD" fullpath)
          (change-directory fullpath))
	(begin
	  (debug:print-error 0 *default-log-port* "non-existant start dir " (args:get-arg "-start-dir") " specified, exiting.")
	  (exit 1))))

;; immediately set MT_TARGET if -reqtarg or -target are available
;;
(let ((targ (or (args:get-arg "-reqtarg")(args:get-arg "-target"))))
  (if targ (setenv "MT_TARGET" targ)))

;; The watchdog is to keep an eye on things like db sync etc.
;;

;; TODO: for multiple areas, we will have multiple watchdogs; and multiple threads to manage
(define *watchdog* (make-thread
		    (lambda ()
		      (handle-exceptions
			  exn
			  (begin
			    (print-call-chain)
			    (print " message: " ((condition-property-accessor 'exn 'message) exn)))
			(common:watchdog)))
		    "Watchdog thread"))

;;(if (not (args:get-arg "-server"))
;;    (thread-start! *watchdog*)) ;; if starting a server; wait till we get to running state before kicking off watchdog
(let* ((no-watchdog-args
       '("-list-runs"
         "-testdata-csv"
         "-list-servers"
         "-server"
         "-list-disks"
         "-list-targets"
         "-show-runconfig"
         ;;"-list-db-targets"
         "-show-runconfig"
         "-show-config"
         "-show-cmdinfo"
	 "-cleanup-db"))
       (no-watchdog-args-vals (filter (lambda (x) x)
                                      (map args:get-arg no-watchdog-args)))
       (start-watchdog (null? no-watchdog-args-vals)))
  ;;(BB> "no-watchdog-args="no-watchdog-args "no-watchdog-args-vals="no-watchdog-args-vals) 
  (if start-watchdog
      (thread-start! *watchdog*)))


;; bracket open-output-file with code to make leading directory if it does not exist and handle exceptions
(define (open-logfile logpath)
  (condition-case
   (let* ((log-dir (or (pathname-directory logpath) ".")))
     (if (not (directory-exists? log-dir))
         (system (conc "mkdir -p " log-dir)))
     (open-output-file logpath))
   (exn ()
        (debug:print-error 0 *default-log-port* "Could not open log file for write: "logpath)
        (define *didsomething* #t)  
        (exit 1))))

;; this segment will run launch:setup only if -log is not set. This is fairly safe as servers are not
;; manually started and thus should never be started in a non-megatest area. Thus no need to handle situation
;; where (launch:setup) returns #f?
;;
(if (or (args:get-arg "-log")(args:get-arg "-server")) ;; redirect the log always when a server
    (handle-exceptions
	exn
	(begin
	  (print "ERROR: Failed to switch to log output. " ((condition-property-accessor 'exn 'message) exn))
	  )
      (let* ((tl   (or (args:get-arg "-log")(launch:setup)))   ;; run launch:setup if -server, ensure we do NOT run launch:setup if -log specified
	     (logf (or (args:get-arg "-log") ;; use -log unless we are a server, then craft a logfile name
		       (conc tl "/logs/server-" (current-process-id) "-" (get-host-name) ".log")))
	     (oup  (open-logfile logf)))
	(if (not (args:get-arg "-log"))
	    (hash-table-set! args:arg-hash "-log" logf)) ;; fake out future queries of -log
	(debug:print-info 0 *default-log-port* "Sending log output to " logf)
	(set! *default-log-port* oup))))

(if (or (args:get-arg "-h")
	(args:get-arg "-help")
	(args:get-arg "--help"))
    (begin
      (print help)
      (exit)))

(if (args:get-arg "-manual")
    (let* ((htmlviewercmd (or (configf:lookup *configdat* "setup" "htmlviewercmd")
			      (common:which '("firefox" "arora"))))
	   (install-home  (common:get-install-area))
	   (manual-html   (conc install-home "/share/docs/megatest_manual.html")))
      (if (and install-home
	       (file-exists? manual-html))
	  (system (conc "(" htmlviewercmd " " manual-html " ) &"))
	  (system (conc "(" htmlviewercmd " http://www.kiatoa.com/cgi-bin/fossils/megatest/doc/tip/docs/manual/megatest_manual.html ) &")))
      (exit)))








(if (args:get-arg "-version")
    (begin
      (print (common:version-signature)) ;; (print megatest-version)
      (exit)))

(define *didsomething* #f)

;; Overall exit handling setup immediately
;;
(if (or (args:get-arg "-process-reap"))
        ;; (args:get-arg "-runtests")
	;; (args:get-arg "-execute")
	;; (args:get-arg "-remove-runs")
	;; (args:get-arg "-runstep"))
    (let ((original-exit (exit-handler)))
      (exit-handler (lambda (#!optional (exit-code 0))
		      (printf "Preparing to exit with exit code ~A ...\n" exit-code)
		      (for-each
		       
		       (lambda (pid)
			 (handle-exceptions
			  exn
			  #t
			  (let-values (((pid-val exit-status exit-code) (process-wait pid #t)))
				      (if (or (eq? pid-val pid)
					      (eq? pid-val 0))
					  (begin
					    (printf "Sending signal/term to ~A\n" pid)
					    (process-signal pid signal/term))))))
		       (process:children #f))
		      (original-exit exit-code)))))

;; for some switches always print the command to stderr
;;
(if (args:any? "-run" "-runall" "-remove-runs" "-set-state-status")
    (debug:print 0 *default-log-port* (string-intersperse (argv) " ")))

;; some switches imply homehost. Exit here if not on homehost
;;
(let ((homehost-required  (list "-cleanup-db" "-server")))
  (if (apply args:any? homehost-required)
      (if (not (common:on-homehost?))
	  (for-each
	   (lambda (switch)
	     (if (args:get-arg switch)
		 (begin
		   (debug:print 0 *default-log-port* "ERROR: you must be on the homehost to run with " switch
				", you can move homehost by removing the .homehost file but this will disrupt any runs in progress.")
		   (exit 1))))
	   homehost-required))))

;;======================================================================
;; Misc setup stuff
;;======================================================================

(debug:setup)

           (source-db (args:get-arg "-source-db")))        
      (db:cache-for-read-only source-db target-db)
      (set! *didsomething* #t)))

;; handle a clean-cache request as early as possible
;;
(if (args:get-arg "-clean-cache")
    (let ((toppath  (launch:setup)))
      (set! *didsomething* #t) ;; suppress the help output.

      (runs:clean-cache (getenv "MT_TARGET")(args:get-arg "-runname") toppath)))





















	  
(if (args:get-arg "-env2file")
    (begin
      (save-environment-as-files (args:get-arg "-env2file"))
      (set! *didsomething* #t)))

(if (args:get-arg "-list-disks")

(if (args:get-arg "-server")
    (let ((tl        (launch:setup))
          (transport-type (string->symbol (or (args:get-arg "-transport") "http"))))
      (server:launch 0 transport-type)
      (set! *didsomething* #t)))

(if (or (args:get-arg "-list-servers")

        (args:get-arg "-kill-servers"))
    (let ((tl (launch:setup)))
      (if tl ;; all roads from here exit
	  (let* ((servers (server:get-list *toppath*))

		 (fmtstr  "~8a~22a~20a~20a~8a\n"))





	    (format #t fmtstr "pid" "Interface:port" "age (hms)" "Last mod" "State")
	    (format #t fmtstr "===" "==============" "=========" "========" "=====")
	    (for-each ;;  ( mod-time host port start-time pid )
	     (lambda (server)
	       (let* ((mtm (any->number (car server)))
		      (mod (if mtm (- (current-seconds) mtm) "unk"))
		      (age (- (current-seconds)(or (any->number (list-ref server 3)) (current-seconds))))
		      (url (conc (cadr server) ":" (caddr server)))

		      (pid (list-ref server 4))







		      (alv (if (number? mod)(< mod 10) #f)))
		 (format #t
			 fmtstr


			 pid
			 url



			 (seconds->hr-min-sec age)


			 (seconds->hr-min-sec mod)
			 (if alv "alive" "dead"))
		 (if (and alv
			  (args:get-arg "-kill-servers"))
		     (begin
		       (debug:print-info 0 *default-log-port* "Attempting to kill server with pid " pid)
		       (server:kill server)))))
	     (sort servers (lambda (a b)
			     (let ((ma (or (any->number (car a)) 9e9))
				   (mb (or (any->number (car b)) 9e9)))
			       (> ma mb)))))
	    ;; (debug:print-info 1 *default-log-port* "Done with listservers")
	    (set! *didsomething* #t)
	    (exit))
	  (exit))))
      ;; must do, would have to add checks to many/all calls below

;;======================================================================
;; Weird special calls that need to run *after* the server has started?
;;======================================================================

(if (args:get-arg "-list-targets")
    (if (launch:setup)

  (let* ((rundir (if (and (getenv "MT_LINKTREE")(getenv "MT_TARGET")(getenv "MT_RUNNAME"))
		     (conc (getenv "MT_LINKTREE") "/" (getenv "MT_TARGET") "/" (getenv "MT_RUNNAME"))
		     #f))
	 (cfgf   (if rundir (conc rundir "/.runconfig." megatest-version "-" megatest-fossil-hash) #f)))
    (if (and cfgf
	     (file-exists? cfgf)
	     (file-write-access? cfgf)
	     (common:use-cache?))
	(configf:read-alist cfgf)
	(let* ((keys   (rmt:get-keys))
	       (target (common:args-get-target))
	       (key-vals (if target (keys:target->keyval keys target) #f))
	       (sections (if target (list "default" target) #f))
	       (data     (begin
			   (setenv "MT_RUN_AREA_HOME" *toppath*)
			   (if key-vals
			       (for-each (lambda (kt)
					   (setenv (car kt) (cadr kt)))
					 key-vals))
			   ;; (read-config (conc *toppath* "/runconfigs.config") #f #t sections: sections))))
                           (runconfig:read (conc *toppath* "/runconfigs.config") target #f))))
	  (if (and rundir ;; have all needed variabless
		   (directory-exists? rundir)
		   (file-write-access? rundir))
	      (begin
                (if (not (common:in-running-test?))
                    (configf:write-alist data cfgf))
		;; force re-read of megatest.config - this resolves circular references between megatest.config
		(launch:setup force-reread: #t)
		(launch:cache-config))) ;; we can safely cache megatest.config since we have a valid runconfig
	  data))))

(if (args:get-arg "-show-runconfig")
    (let ((tl (launch:setup)))
      (push-directory *toppath*)
      (let ((data (full-runconfigs-read)))

       ((string=? (args:get-arg "-dumpmode") "json")
	(json-write data))
       ((string=? (args:get-arg "-dumpmode") "ini")
	(configf:config->ini data))
       (else
	(debug:print-error 0 *default-log-port* "-dumpmode of " (args:get-arg "-dumpmode") " not recognised")))
      (set! *didsomething* #t)
      (pop-directory)
      (set! *time-to-exit* #t)))

(if (args:get-arg "-show-cmdinfo")
    (if (or (args:get-arg ":value")(getenv "MT_CMDINFO"))
	(let ((data (common:read-encoded-string (or (args:get-arg ":value")(getenv "MT_CMDINFO")))))
	  (if (equal? (args:get-arg "-dumpmode") "json")
	      (json-write data)
	      (pp data))

(define (get-value-by-fieldname datavec test-field-index fieldname)
  (let ((indx (hash-table-ref/default test-field-index fieldname #f)))
    (if indx
	(if (>= indx (vector-length datavec))
	    #f ;; index too high, should raise an error I suppose
	    (vector-ref datavec indx))
	#f)))





(when (args:get-arg "-testdata-csv")
  (if (launch:setup)
      (let* ((keys        (rmt:get-keys)) ;; (db:get-keys dbstruct))
             (runpatt     (or (args:get-arg "-runname") "%"))
             (testpatt    (common:args-get-testpatt #f))
             (datapatt    (args:get-arg "-testdata-csv"))
             (match-data  (string-match "^([^/]+)/(.*)" (args:get-arg "-testdata-csv")))
             (categorypatt (if match-data (list-ref match-data 1) "%"))
             (setvarpatt  (if match-data
                              (list-ref match-data 2)
                              (args:get-arg "-testdata-csv")))
             (runsdat     (rmt:get-runs-by-patt keys (or runpatt "%") 
                                                (common:args-get-target) #f #f '("id" "runname" "state" "status" "owner" "event_time" "comment") 0))
             (header      (db:get-header runsdat))
             (access-mode (db:get-access-mode))
             (testpatt    (common:args-get-testpatt #f))
             (fields-spec (if (args:get-arg "-fields")
                              (extract-fields-constraints (args:get-arg "-fields"))
                              (list (cons "runs" (append keys (list "id" "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count")))
                                    (cons "tests"  db:test-record-fields) ;; "id" "testname" "test_path")
                                    (list "steps" "id" "stepname"))))
             (tests-spec  (let ((t (alist-ref "tests" fields-spec equal?)))
                            (if (and t (null? t)) ;; all fields
                                db:test-record-fields
                                t)))
             (adj-tests-spec (delete-duplicates (if tests-spec (cons "id" tests-spec) db:test-record-fields))) 
             (test-field-index (make-hash-table))
             (runs (db:get-rows runsdat))
             )
        (if (and tests-spec (not (null? tests-spec))) ;; do some validation and processing of the test-spec
            (let ((invalid-tests-spec (filter (lambda (x)(not (member x db:test-record-fields))) tests-spec)))
              (if (null? invalid-tests-spec)
                  ;; generate the lookup map test-field-name => index-number
                  (let loop ((hed (car adj-tests-spec))
                             (tal (cdr adj-tests-spec))
                             (idx 0))
                    (hash-table-set! test-field-index hed idx)
                    (if (not (null? tal))(loop (car tal)(cdr tal)(+ idx 1))))
                  (begin
                    (debug:print-error 0 *default-log-port* "Invalid test fields specified: " (string-intersperse invalid-tests-spec ", "))
                    (exit)))))
        (let* ((table-header (string-split "target,run,test,itempath,category,var,value,comment" ","))
               (table-rows
                (apply append (map  
                               (lambda (run)
                                 (let* ((target (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))
						       keys) "/"))
                                        (statuses (string-split (or (args:get-arg "-status") "") ","))
                                        (run-id  (db:get-value-by-header run header "id"))
                                        (runname (db:get-value-by-header run header "runname")) 
                                        (states  (string-split (or (args:get-arg "-state") "") ","))
                                        (tests   (if tests-spec
                                                     (db:dispatch-query access-mode rmt:get-tests-for-run db:get-tests-for-run run-id testpatt states statuses #f #f #f 'testname 'asc ;; (db:get-tests-for-run dbstruct run-id testpatt '() '() #f #f #f 'testname 'asc 
                                                                        ;; use qryvals if test-spec provided
                                                                        (if tests-spec
                                                                            (string-intersperse adj-tests-spec ",")
                                                                            ;; db:test-record-fields
                                                                            #f)
                                                                        #f
                                                                        'normal)
                                                     '())))
                                   (apply append
                                          (map
                                           (lambda (test)
                                             (let* (
                                                    (test-id      (if (member "id"           tests-spec)(get-value-by-fieldname test test-field-index "id"          ) #f)) ;; (db:test-get-id         test))
                                                    (testname     (if (member "testname"     tests-spec)(get-value-by-fieldname test test-field-index "testname"    ) #f)) ;; (db:test-get-testname   test))
                                                    (itempath     (if (member "item_path"    tests-spec)(get-value-by-fieldname test test-field-index "item_path"   ) #f)) ;; (db:test-get-item-path  test))
                                                    (fullname     (conc testname
                                                                        (if (equal? itempath "")
                                                                            "" 
                                                                            (conc "/" itempath ))))
                                                    (testdat-raw (map vector->list (rmt:read-test-data* run-id test-id categorypatt setvarpatt)))
                                                    (testdat (filter
                                                              (lambda (x)
                                                                (not (equal? "logpro"
                                                                             (list-ref x 10))))
                                                              testdat-raw)))
                                               (map 
                                                (lambda (item)
                                                  (receive (id test_id category
                                                               variable value expected
                                                               tol units comment status type)
                                                      (apply values item)
                                                    (list target runname testname itempath category variable value comment)))
                                                testdat)))
                                           tests))))
                               runs))))
          (print (string-join table-header ","))
          (for-each (lambda(table-row)
                      (print (string-join (map ->string table-row) ",")))

                    
                            table-rows))))
  (set! *didsomething* #t)
  (set! *time-to-exit* #t))



;; NOTE: list-runs and list-db-targets operate on local db!!!
;;
;; IDEA: megatest list -runname blah% ...
;;
(if (or (args:get-arg "-list-runs")
	(args:get-arg "-list-db-targets"))

			;;   		       res)))
			;;         (if (null? tal)
			;;   	  (reverse new-res)
			;;   	  (loop (car tal)(cdr tal) new-res)))))
			;;   runstmp))
	       (db-targets  (args:get-arg "-list-db-targets"))
	       (seen        (make-hash-table))
	       (dmode       (let ((d (args:get-arg "-dumpmode"))) ;; json, sexpr
			      (if d (string->symbol d) #f)))
	       (data        (make-hash-table))
	       (fields-spec (if (args:get-arg "-fields")
				(extract-fields-constraints (args:get-arg "-fields"))
				(list (cons "runs" (append keys (list "id" "runname" "state" "status" "owner" "event_time" "comment" "fail_count" "pass_count")))
				      (cons "tests"  db:test-record-fields) ;; "id" "testname" "test_path")
				      (list "steps" "id" "stepname"))))

			       (tal (cdr adj-tests-spec))
			       (idx 0))
		      (hash-table-set! test-field-index hed idx)
		      (if (not (null? tal))(loop (car tal)(cdr tal)(+ idx 1))))
		    (begin
		      (debug:print-error 0 *default-log-port* "Invalid test fields specified: " (string-intersperse invalid-tests-spec ", "))
		      (exit)))))

	  ;; Each run
	  (for-each 
	   (lambda (run)
	     (let ((targetstr (string-intersperse (map (lambda (x)
							 (db:get-value-by-header run header x))
						       keys) "/")))
	       (if db-targets

								 (string-intersperse adj-tests-spec ",")
								 ;; db:test-record-fields
								 #f)
							     #f
							     'normal)
				       '())))
		     (case dmode
		       ((json ods sexpr)
			(if runs-spec
			    (for-each 
			     (lambda (field-name)
			       (mutils:hierhash-set! data (conc (db:get-value-by-header run header field-name)) targetstr runname "meta" field-name))
			     runs-spec)))
			;; (mutils:hierhash-set! data (db:get-value-by-header run header "status")     targetstr runname "meta" "status"     )
			;; (mutils:hierhash-set! data (db:get-value-by-header run header "state")      targetstr runname "meta" "state"      )

				     (display (conc "target: " targetstr " "))
				     (display (conc field-name ": " (db:get-value-by-header run header (conc field-name)) " "))))
			       runs-spec)
			      (newline)))))
		       
		     (for-each 
		      (lambda (test)
		      	(common:debug-handle-exceptions #f
			 exn
			 (begin
			   (debug:print-error 0 *default-log-port* "Bad data in test record? " test)
			   (debug:print-error 5 *default-log-port* "exn=" (condition->list exn))
			   (debug:print 0 *default-log-port* " message: " ((condition-property-accessor 'exn 'message) exn))
			   (print-call-chain (current-error-port)))
			 (let* ((test-id      (if (member "id"           tests-spec)(get-value-by-fieldname test test-field-index "id"          ) #f)) ;; (db:test-get-id         test))
				(testname     (if (member "testname"     tests-spec)(get-value-by-fieldname test test-field-index "testname"    ) #f)) ;; (db:test-get-testname   test))
				(itempath     (if (member "item_path"    tests-spec)(get-value-by-fieldname test test-field-index "item_path"   ) #f)) ;; (db:test-get-item-path  test))
				(comment      (if (member "comment"      tests-spec)(get-value-by-fieldname test test-field-index "comment"     ) #f)) ;; (db:test-get-comment    test))
				(tstate       (if (member "state"        tests-spec)(get-value-by-fieldname test test-field-index "state"       ) #f)) ;; (db:test-get-state      test))
				(tstatus      (if (member "status"       tests-spec)(get-value-by-fieldname test test-field-index "status"      ) #f)) ;; (db:test-get-status     test))
				(event-time   (if (member "event_time"   tests-spec)(get-value-by-fieldname test test-field-index "event_time"  ) #f)) ;; (db:test-get-event_time test))
				(rundir       (if (member "rundir"       tests-spec)(get-value-by-fieldname test test-field-index "rundir"      ) #f)) ;; (db:test-get-rundir     test))
				(final_logf   (if (member "final_logf"   tests-spec)(get-value-by-fieldname test test-field-index "final_logf"  ) #f)) ;; (db:test-get-final_logf test))
				(run_duration (if (member "run_duration" tests-spec)(get-value-by-fieldname test test-field-index "run_duration") #f)) ;; (db:test-get-run_duration test))
				(fullname     (conc testname
						    (if (equal? itempath "")
							"" 
							(conc "(" itempath ")")))))
			   (case dmode
			     ((json ods sexpr)
			      (if tests-spec
				  (for-each
				   (lambda (field-name)
				     (mutils:hierhash-set! data  (get-value-by-fieldname test test-field-index field-name) targetstr runname "data" (conc test-id) field-name))
				   tests-spec)))
			     ;; ;; (mutils:hierhash-set! data  fullname   targetstr runname "data" (conc test-id) "tname"     )
			     ;;  (mutils:hierhash-set! data  testname   targetstr runname "data" (conc test-id) "testname"  )

				    ((cond 
				      ((and (number? first)(number? second)) <)
				      ((and (string? first)(string? second)) string<=?)
				      (else equal?))
				     first second))))
			  tests))))))
	   runs)
	  (case dmode
	    ((json)  (json-write data))
	    ((sexpr) (pp (common:to-alist data))))
	  (let* ((metadat-fields (delete-duplicates
				  (append keys '( "runname" "time" "owner" "pass_count" "fail_count" "state" "status" "comment" "id"))))
		 (run-fields    '(
				  "testname"
				  "item_path"
				  "state"
				  "status"

							     ;; (print "Target: " target "/" runname " tests:")
							     ;; (pp tests)
							     (cons (conc target "/" runname)
								   (cons (list (conc target "/" runname))
									 (cons '()
									       (cons run-fields tests)))))
							   (begin
							     (debug:print 4 *default-log-port* "WARNING: run " target "/" runname " appears to have no data")
							     ;; (pp rundat)
							     '()))))
						   runsdat)
					      '())))
				      newdat)) ;; we use newdat to get target
		 (sheets         (filter (lambda (x)
					   (not (null? x)))

				       outputfile
				       (begin
					 (debug:print 0 *default-log-port* "WARNING: path given, " outputfile " is relative, prefixing with current directory")
					 (conc (current-directory) "/" outputfile)))))
		  (create-directory tempdir #t)
		  (ods:list->ods tempdir ouf sheets))))
	  ;; (system (conc "rm -rf " tempdir))
	  (set! *didsomething* #t)
          (set! *time-to-exit* #t)
          ) ;; end if true branch (end of a let)
        ) ;; end if
    ) ;; end if -list-runs

;; Don't think I need this. Incorporated into -list-runs instead
;;
;; (if (and (args:get-arg "-since")
;; 	 (launch:setup))
;;     (let* ((since-time (string->number (args:get-arg "-since")))
;; 	   (run-ids    (db:get-changed-run-ids since-time)))

;; run all tests are are Not COMPLETED and PASS or CHECK
(if (or (args:get-arg "-runall")
	(args:get-arg "-run")
	(args:get-arg "-rerun-clean")
	(args:get-arg "-rerun-all")
	(args:get-arg "-runtests"))
    (let ((need-clean (or (args:get-arg "-rerun-clean")
                          (args:get-arg "-rerun-all"))))
      (general-run-call 
       "-runall"
       "run all tests"
       (lambda (target runname keys keyvals)
         (if (args:get-arg "-rerun-clean") ;; first set states/statuses correct
             (let ((states   (or (configf:lookup *configdat* "validvalues" "cleanrerun-states")
                                 "KILLREQ,KILLED,UNKNOWN,INCOMPLETE,STUCK,NOT_STARTED"))
                   (statuses (or (configf:lookup *configdat* "validvalues" "cleanrerun-statuses")
                                 "FAIL,INCOMPLETE,ABORT,CHECK")))
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  states
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: statuses
                                new-state-status: "NOT_STARTED,n/a")))
         ;; RERUN ALL
         (if (args:get-arg "-rerun-all") ;; first set states/statuses correct
             (begin
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                state:  #f
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: #f
                                new-state-status: "NOT_STARTED,n/a")))
         (runs:run-tests target
                         runname
                         #f ;; (common:args-get-testpatt #f)
                         ;; (or (args:get-arg "-testpatt")
                         ;;     "%")
                         user
                         args:arg-hash)))))

;;======================================================================
;; run one test
;;======================================================================

;; 1. find the config file
;; 2. change to the test directory

(if (args:get-arg "-cleanup-db")
    (begin
      (if (not (launch:setup))
	  (begin
	    (debug:print 0 *default-log-port* "Failed to setup, exiting") 
	    (exit 1)))
      (let ((dbstruct (db:setup #f areapath: *toppath*)))
        (common:cleanup-db dbstruct))
      (set! *didsomething* #t)))

(if (args:get-arg "-mark-incompletes")
    (begin
      (if (not (launch:setup))
	  (begin

(if (or (getenv "MT_RUNSCRIPT")
	(args:get-arg "-repl")
	(args:get-arg "-load"))
    (let* ((toppath (launch:setup))
	   (dbstruct (if (and toppath
                              (common:on-homehost?))
                         (db:setup #t)
                         #f))) ;; make-dbr:dbstruct path: toppath local: (args:get-arg "-local")) #f)))
      (if *toppath*
	  (cond
	   ((getenv "MT_RUNSCRIPT")
	    ;; How to run megatest scripts
	    ;;
	    ;; #!/bin/bash

;; ;; ;; redo me        (db:close-all dbstruct)
;; ;; ;; redo me        (list "uname" "rundir" "final_logf" "comment"))
;; ;; ;; redo me       (set! *didsomething* #t)))

(if (args:get-arg "-import-megatest.db")
    (begin
      (db:multi-db-sync 
       (db:setup #f)
       'killservers
       'dejunk
       'adj-testids
       'old2new
       ;; 'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to-megatest.db")
    (begin
      (db:multi-db-sync 
       (db:setup #f)
       'new2old
       )
      (set! *didsomething* #t)))

(if (args:get-arg "-sync-to")
    (let ((toppath (launch:setup)))
      (tasks:sync-to-postgres *configdat* (args:get-arg "-sync-to"))
      (set! *didsomething* #t)))

(if (args:get-arg "-generate-html")
    (let* ((toppath (launch:setup)))
      (if (tests:create-html-tree #f)
          (debug:print-info 0 *default-log-port* "HTML output created in " toppath "/lt/page#.html")
          (debug:print 0 *default-log-port* "Failed to create HTML output in " toppath "/lt/runs-index.html"))
      (set! *didsomething* #t)))

;;======================================================================
;; Exit and clean up
;;======================================================================

(if (not *didsomething*)
    (debug:print 0 *default-log-port* help)
    (set! *time-to-exit* #t)
    )
;;(debug:print-info 13 *default-log-port* "thread-join! watchdog")

;; join the watchdog thread if it has been thread-start!ed  (it may not have been started in the case of a server that never enters running state)
;;   (symbols returned by thread-state: created ready running blocked suspended sleeping terminated dead)
;; TODO: for multiple areas, we will have multiple watchdogs; and multiple threads to manage
(if (thread? *watchdog*)
    (case (thread-state *watchdog*)
      ((ready running blocked sleeping terminated dead)
       (thread-join! *watchdog*))))

(set! *time-to-exit* #t)