Megatest

      allow-system))
    
;; given a config hash and a section name, apply that section to all matching sections (using wildcard % or regex if /..../)
;; remove the section when done so that there is no downstream clobbering
;;
(define (configf:apply-wildcards ht section-name)
  (if (hash-table-exists? ht section-name)
      (let* ((vars  (hash-table-ref ht section-name))
	     (rxstr (if (string-contains section-name "%")
			(string-substitute (regexp "%") ".*" section-name)
			(string-substitute (regexp "^/(.*)/$") "\\1" section-name)))
	     (rx    (regexp rxstr)))
	;; (print "\nsection-name: " section-name " rxstr: " rxstr)
        (for-each
         (lambda (section)

	   (if section
	       (let ((same-section (string=? section-name section))
		     (rx-match     (string-match rx section)))
		 ;; (print "section: " section " vars: " vars " same-section: " same-section " rx-match: " rx-match)
		 (if (and (not same-section) rx-match)
		     (for-each
		      (lambda (bundle)
			;; (print "bundle: " bundle)
			(let ((key  (car bundle))
			      (val  (cadr bundle))
			      (meta (if (> (length bundle) 2)(caddr bundle) #f)))
			  (hash-table-set! ht section (config:assoc-safe-add (hash-table-ref ht section) key val metadata: meta))))
		      vars)))))
         (hash-table-keys ht))))
  ht)

;; read a config file, returns hash table of alists

;; read a config file, returns hash table of alists
;; adds to ht if given (must be #f otherwise)
;; envion-patt is a regex spec that identifies sections that will be eval'd
;; in the environment on the fly
;; sections: #f => get all, else list of sections to gather
;; post-section-procs alist of section-pattern => proc, where: (proc section-name next-section-name ht curr-path)
;; apply-wildcards: #t/#f - apply vars from targets with % wildcards to all matching sections
;;
(define (read-config path ht allow-system #!key (environ-patt #f)            (curr-section #f)
		     (sections #f)              (settings (make-hash-table)) (keep-filenames #f)
		     (post-section-procs '())   (apply-wildcards #t))
  (debug:print 9 *default-log-port* "START: " path)
  (if (and (not (port? path))
	   (not (file-exists? path))) ;; for case where we are handed a port
      (begin 
	(debug:print-info 1 *default-log-port* "read-config - file not found " path " current path: " (current-directory))
	;; WARNING: This is a risky change but really, we should not return an empty hash table if no file read?
	#f) ;; (if (not ht)(make-hash-table) ht))

	  (debug:print-info 8 *default-log-port* "curr-section-name: " curr-section-name " var-flag: " var-flag "\n   inl: \"" inl "\"")
	  (if (eof-object? inl) 
	      (begin
                ;; process last section for wildcards
                (process-wildcards res curr-section-name)
		(if (string? path) ;; we received a path, not a port, thus we are responsible for closing it.
		    (close-input-port inp))
		(if (list? sections) ;; delete all sections except given when sections is provided
		    (for-each
		     (lambda (section)
		       (if (not (member section sections))
			   (hash-table-delete! res section))) ;; we are using "" as a dumping ground and must remove it before returning the ht
		     (hash-table-keys res)))
		(debug:print 9 *default-log-port* "END: " path)
		res)
	      (regex-case 
	       inl 
	       (configf:comment-rx _                  (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f))
	       (configf:blank-l-rx _                  (loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings) curr-section-name #f #f))
	       (configf:settings   ( x setting val  ) (begin

								 (proc curr-section-name section-name res path))))
							 post-section-procs)
                                                        ;; after gathering the vars for a section and if apply-wildcards is true and if there is a wildcard in the section name process wildcards
                                                        ;; NOTE: we are processing the curr-section-name, NOT section-name.
                                                        (process-wildcards res curr-section-name)
							(loop (configf:read-line inp res (calc-allow-system allow-system curr-section-name sections) settings)
							      ;; if we have the sections list then force all settings into "" and delete it later?
							      ;; (if (or (not sections) 
							      ;;	      (member section-name sections))
							      ;;	  section-name "") ;; stick everything into "". NOPE: We need new strategy. Put stuff in correct sections and then delete all sections later.
							      section-name
							      #f #f)))
	       (configf:key-sys-pr ( x key cmd      ) (if (calc-allow-system allow-system curr-section-name sections)
							  (let ((alist    (hash-table-ref/default res curr-section-name '()))
								(val-proc (lambda ()
									    (let* ((start-time (current-seconds))
										   (cmdres     (process:cmd-run->list cmd))
										   (delta      (- (current-seconds) start-time))

          (dbr:dbstruct-refndb-set! dbstruct refndb)
          ;;	    (mutex-unlock! *rundb-mutex*)
          (if (and (not dbfexists)
                   write-access) ;; *db-write-access*) ;; did not have a prior db and do have write access
	      (begin
		(debug:print 0 *default-log-port* "filling db " (db:dbdat-get-path tmpdb) " with data from " (db:dbdat-get-path mtdb))
		(db:sync-tables (db:sync-all-tables-list dbstruct) #f mtdb refndb tmpdb))
	      (debug:print 4 *default-log-port* " db, " (db:dbdat-get-path tmpdb) " already exists, not propogating data from " (db:dbdat-get-path mtdb)))
	  ;; (db:multi-db-sync dbstruct 'old2new))  ;; migrate data from megatest.db automatically
          tmpdb))))

;; Make the dbstruct, setup up auxillary db's and call for main db at least once
;;
;; called in http-transport and replicated in rmt.scm for *local* access. 
;;

		 (lambda (db)
		   (sqlite3:execute db qry newstate newstatus run-id testname)))
		(if test-id (mt:process-triggers dbstruct run-id test-id newstate newstatus))))
	    testnames))

;; ;; speed up for common cases with a little logic
;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   ;; run-id
   #t
   (lambda (db)
     (cond
      ((and newstate newstatus newcomment)
       (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)
			test-id))
      ((and newstate newstatus)

  (let* ((run-ids (db:get-all-run-ids mtdb)))
    (for-each 
     (lambda (run-id)
       (let ((testrecs (db:get-all-tests-info-by-run-id mtdb run-id)))
	 (db:prep-megatest.db-adj-test-ids (db:dbdat-get-db mtdb) run-id testrecs)))
     run-ids)))

;; Get test data using test_id, run-id is not used
;; 
(define (db:get-test-info-by-id dbstruct run-id test-id)
  (db:with-db
   dbstruct
   #f ;; run-id
   #f
   (lambda (db)
     (let ((res #f))
       (sqlite3:for-each-row ;; attemptnum added to hold pid of top process (not Megatest) controlling a test
	(lambda (id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived)
	  ;;             0    1       2      3      4        5       6      7        8     9     10      11          12          13           14         15          16
	  (set! res (vector id run-id testname state status event-time host cpuload diskfree uname rundir-id item-path run_duration final-logf-id comment short-dir-id attemptnum archived)))

	;; stuff for set-state-status-and-roll-up-items
	'(update-pass-fail-counts "UPDATE tests 
             SET fail_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('FAIL','CHECK','INCOMPLETE','ABORT')),
                 pass_count=(SELECT count(id) FROM tests WHERE testname=? AND item_path != '' AND status IN ('PASS','WARN','WAIVED'))
             WHERE testname=? AND item_path='' AND run_id=?;") ;; DONE  ;; BROKEN!!! NEEDS run-id
	'(top-test-set-running  "UPDATE tests SET state='RUNNING' WHERE testname=? AND item_path='' AND run_id=?;") ;; DONE   ;; BROKEN!!! NEEDS run-id

	;; NOT USED
	;;
	;; Might be the following top-test-set-per-pf-counts query could be better based off of something like this:
	;;
	;; select state,status,count(state) from tests where run_id=59 AND testname='runfirst' group by state,status;
	;;
	'(top-test-set-per-pf-counts "UPDATE tests
                       SET state=CASE 
                                   WHEN (SELECT count(id) FROM tests 

;;======================================================================
;; Weird special calls that need to run *after* the server has started?
;;======================================================================

(if (args:get-arg "-list-targets")
    (if (launch:setup)
        (let ((targets (common:get-runconfig-targets)))
          ;; (debug:print 1 *default-log-port* "Found "(length targets) " targets")
          (case (string->symbol (or (args:get-arg "-dumpmode") "alist"))
            ((alist)
             (for-each (lambda (x)
                         ;; (print "[" x "]"))
                         (print x))
                       targets))
            ((json)

(declare (unit runconfig))
(declare (uses common))

(include "common_records.scm")

(define (runconfig:read fname target environ-patt)
  (let ((ht (make-hash-table)))
    (if target (hash-table-set! ht target '()))
    (read-config fname ht #t environ-patt: environ-patt sections: (if target (list "default" target) #f))))

;; NB// to process a runconfig ensure to use environ-patt with target!
;;
(define (setup-env-defaults fname run-id already-seen keyvals #!key (environ-patt #f)(change-env #t))
  (let* ((keys    (map car keyvals))
	 (thekey  (if keyvals