Megatest

				      (list fail-count pass-count test-id))
			      *incoming-data*))
  (mutex-unlock! *incoming-mutex*)
  (if *cache-on*
      (debug:print 6 "INFO: *cache-on* is " *cache-on* ", skipping cache write")
      (db:write-cached-data)))

(define (cdb:tests-register-test run-id test-name item-path #!key (force-write #f))
  (let ((item-paths (if (equal? item-path "")
			(list item-path)
			(list item-path ""))))
    (debug:print 4 "INFO: Adding " run-id ", " test-name "/" item-path " for setting pass/fail counts to the queue")
    (mutex-lock! *incoming-mutex*)
    (set! *last-db-access* (current-seconds))
    (set! *incoming-data* (cons (vector 'register-test

  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'cdb:pass-fail-counts host port) test-id fail-count pass-count))
      (cdb:pass-fail-counts test-id fail-count pass-count)))

;; currently forces a flush of the queue
(define (rdb:tests-register-test run-id test-name item-path)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'cdb:tests-register-test host port) run-id test-name item-path force-write: #t))
      (cdb:tests-register-test run-id test-name item-path force-write: #t)))

(define (rdb:flush-queue)
  (if *runremote*
      (let ((host (vector-ref *runremote* 0))
	    (port (vector-ref *runremote* 1)))
	((rpc:procedure 'cdb:flush-queue host port)))
      (cdb:flush-queue)))

      (debug:print 0 "INFO: Starting the standalone server")
      (if db 
	  (let* ((host:port (db:get-var db "SERVER")) ;; this doen't support multiple servers BUG!!!!
		 (th2 (server:start db (args:get-arg "-server")))
		 (th3 (make-thread (lambda ()
				     (server:keep-running db host:port)))))
	    (thread-start! th3)
	    (thread-join! th3)
	    (set! *didsomethings* #t))
	  (debug:print 0 "ERROR: Failed to setup for megatest"))))

;;======================================================================
;; full run
;;======================================================================

;; get lock in db for full run for this directory

		  ;; else the run is stuck, temporarily or permanently
		  ;; but should check if it is due to lack of resources vs. prerequisites
		  (debug:print 1 "INFO: Skipping " (tests:testqueue-get-testname test-record) " " item-path " as it doesn't match " item-patts)
		  (thread-sleep! *global-delta*)
		  (if (not (null? tal))
		      (loop (car tal)(cdr tal) reruns)))
		 ((not (hash-table-ref/default test-registery (runs:make-full-test-name test-name item-path) #f))
		  ;; (open-run-close db:tests-register-test #f run-id test-name item-path)
		  (rdb:tests-register-test run-id test-name item-path)
		  (rdb:flush-queue)
		  (hash-table-set! test-registery (runs:make-full-test-name test-name item-path) #t)
		  (thread-sleep! *global-delta*)
		  (loop (car newtal)(cdr newtal) reruns))
		 ((not have-resources) ;; simply try again after waiting a second
		  (thread-sleep! (+ 1 *global-delta*))
		  (debug:print 1 "INFO: no resources to run new tests, waiting ...")
		  ;; could have done hed tal here but doing car/cdr of newtal to rotate tests

	    ;;
	    ;; NB// for the above line. I want the test to be registered long before this routine gets called!
	    ;;
	    (set! test-id (open-run-close db:get-test-id db run-id test-name item-path))
	    (if (not test-id)
		(begin
		  (debug:print 2 "WARN: Test not pre-created? test-name=" test-name ", item-path=" item-path ", run-id=" run-id)
		  ;; (open-run-close db:tests-register-test #f run-id test-name item-path)
		  (rdb:tests-register-test run-id test-name item-path)
		  (rdb:flush-queue)
		  (set! test-id (open-run-close db:get-test-id db run-id test-name item-path))))
	    (debug:print 4 "INFO: test-id=" test-id ", run-id=" run-id ", test-name=" test-name ", item-path=\"" item-path "\"")
	    (set! testdat (open-run-close db:get-test-info-by-id db test-id))))
      (set! test-id (db:test-get-id testdat))
      (change-directory test-path)
      (case (if force ;; (args:get-arg "-force")
		'NOT_STARTED

	 (debug:print 1 "NOTE: " new-test-name " is already running or was explictly killed, use -force to launch it."))
	((LAUNCHED REMOTEHOSTSTART RUNNING)  
	 (if (> (- (current-seconds)(+ (db:test-get-event_time testdat)
				       (db:test-get-run_duration testdat)))
		600) ;; i.e. no update for more than 600 seconds
	     (begin
	       (debug:print 0 "WARNING: Test " test-name " appears to be dead. Forcing it to state INCOMPLETE and status STUCK/DEAD")
	       (tests:test-set-status! test-id "INCOMPLETE" "STUCK/DEAD" "Test is stuck or dead" #f)
	       ;; (rdb:flush-queue)
	       )
	     (debug:print 2 "NOTE: " test-name " is already running")))
	(else       (debug:print 0 "ERROR: Failed to launch test " new-test-name ". Unrecognised state " (test:get-state testdat)))))))

;;======================================================================
;; END OF NEW STUFF
;;======================================================================

	    (keys #f))
	(if (not (setup-for-run))
	    (begin 
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (args:get-arg "-server")
	    (open-run-close server:start db (args:get-arg "-server"))
 	    ;;(if (not (or (args:get-arg "-runall")     ;; runall and runtests are allowed to be servers
 	    ;;    	 (args:get-arg "-runtests")))
	    (server:client-setup))
	;; )
	(set! keys (open-run-close db:get-keys db))
	;; have enough to process -target or -reqtarg here
	(if (args:get-arg "-reqtarg")
	    (let* ((runconfigf (conc  *toppath* "/runconfigs.config")) ;; DO NOT EVALUATE ALL 
		   (runconfig  (read-config runconfigf #f #f environ-patt: #f))) 
	      (if (hash-table-ref/default runconfig (args:get-arg "-reqtarg") #f)
		  (keys:target-set-args keys (args:get-arg "-reqtarg") args:arg-hash)

BUILDHOME=$PWD
if [[ $PREFIX == "" ]]; then
   PREFIX=$PWD/inst
fi

export PATH=$PREFIX/bin:$PATH
export LIBPATH=$PREFIX/lib$ADDITIONAL_LIBPATH
export LD_LIBRARY_PATH=$LIBPATH
echo "export PATH=$PREFIX/bin:\$PATH" > setup-chicken4x.sh
echo "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH" >> setup-chicken4x.sh

echo PATH=$PATH
echo LD_LIBRARY_PATH=$LD_LIBRARY_PATH

if ! [[ -e $PREFIX/bin/csi ]]; then
    tar xfvz chicken-${CHICKEN_VERSION}.tar.gz
    cd chicken-${CHICKEN_VERSION}

cd $BUILDHOME

for a in `ls */*.meta|cut -f1 -d/` ; do 
    echo $a
    (cd $a;chicken-install)
done




export SQLITE3_VERSION=3071401
echo Install sqlite3
if ! [[ -e sqlite-autoconf-$SQLITE3_VERSION.tar.gz ]]; then
    wget http://www.sqlite.org/sqlite-autoconf-$SQLITE3_VERSION.tar.gz
fi

cd ffcall
./configure --prefix=$PREFIX --enable-shared
make
make install


cd $BUILDHOME

export CSCLIBS=`echo $LD_LIBRARY_PATH | sed 's/:/ -L/g'`
CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" chicken-install $PROX -D no-library-checks iup
CSC_OPTIONS="-I$PREFIX/include -L$CSCLIBS" chicken-install $PROX -D no-library-checks canvas-draw

# export CD_REL=d704525ebe1c6d08
# if ! [[ -e  Canvas_Draw-$CD_REL.zip ]]; then
#     wget http://www.kiatoa.com/matt/iup/Canvas_Draw-$CD_REL.zip
# fi
# 
# unzip -o Canvas_Draw-$CD_REL.zip
# 
# cd "Canvas Draw-$CD_REL/chicken"
# CSC_OPTIONS="-I$PREFIX/include -L$LIBPATH" chicken-install $PROX -D no-library-checks

echo You may need to add $LD_LIBRARY_PATH to your LD_LIBRARY_PATH variable, a setup-chicken4x.sh 
echo file can be found in the current directory which should work for setting up to run chicken4x