Megatest

    ((delete-test-records)             (apply db:delete-test-records db params))
    ((delete-old-deleted-test-records) (db:delete-old-deleted-test-records db))
    ((test-set-status-state)           (apply db:test-set-status-state db params))
    ((get-previous-test-run-record)    (apply db:get-previous-test-run-record db params))
    ((get-matching-previous-test-run-records)(map vector->list (apply db:get-matching-previous-test-run-records db params)))
    ((db:test-get-logfile-info)        (apply db:test-get-logfile-info db params))
    ((test-get-records-for-index-file  (apply db:test-get-records-for-index-file db params)))
    ((get-testinfo-state-status)       (let ((res (apply db:get-testinfo-state-status db params)))
					 (if (vector? res)
					     (vector->list res)
					     res)))
    ((test-get-paths-matching-keynames-target-new) (apply db:test-get-paths-matching-keynames-target-new db params))
    ((get-prereqs-not-met)             (let ((res (apply db:get-prereqs-not-met db params)))
					 (map (lambda (x)
						(if (vector? x)
						    (vector->list x)
						    x))
					      res)))
    ((roll-up-pass-fail-counts)        (apply db:roll-up-pass-fail-counts db params))
    

    ;; RUNS
    ((get-run-info)                 (let ((res (apply db:get-run-info db params)))
				      (list (vector-ref res 0)
					    (vector->list (vector-ref res 1)))))
    ((register-run)                 (apply db:register-run db params))
    ((set-tests-state-status)       (apply db:set-tests-state-status db params))

    ((update-run-event_time)        (apply db:update-run-event_time db params))

    ;; MISC
    ((login)                        (apply db:login db params))
    ((general-call)                 (let ((stmtname   (car params))
					  (realparams (cdr params)))
				      (db:general-call db stmtname realparams)))
    ((sync-inmem->db)               (db:sync-back))
    ((kill-server)
     (db:sync-to *inmemdb* *db*)
     (let ((hostname (car  *runremote*))
	   (port     (cadr *runremote*))
	   (pid      (if (null? params) #f (car params)))
	   (th1      (make-thread (lambda ()(thread-sleep! 3)(debug:print 0 "Server exiting!")(exit 0)) "Server exit thread")))
       (debug:print 0 "WARNING: Server on " hostname ":" port " going down by user request!")

    ;; organise the steps for better readability
    (let ((res (make-hash-table)))
      (for-each 
       (lambda (step)
	 (debug:print 6 "step=" step)
	 (let ((record (hash-table-ref/default 
			res 
			(tdb:step-get-stepname step) 
			;;        stepname                start end status Duration  Logfile 
			(vector (tdb:step-get-stepname step) ""   "" ""     ""        ""))))
	   (debug:print 6 "record(before) = " record 
			"\nid:       " (tdb:step-get-id step)
			"\nstepname: " (tdb:step-get-stepname step)
			"\nstate:    " (tdb:step-get-state step)
			"\nstatus:   " (tdb:step-get-status step)
			"\ntime:     " (tdb:step-get-event_time step))
	   (case (string->symbol (tdb:step-get-state step))
	     ((start)(vector-set! record 1 (tdb:step-get-event_time step))
	      (vector-set! record 3 (if (equal? (vector-ref record 3) "")
					(tdb:step-get-status step)))
	      (if (> (string-length (tdb:step-get-logfile step))
		     0)
		  (vector-set! record 5 (tdb:step-get-logfile step))))
	     ((end)  
	      (vector-set! record 2 (any->number (tdb:step-get-event_time step)))
	      (vector-set! record 3 (tdb:step-get-status step))
	      (vector-set! record 4 (let ((startt (any->number (vector-ref record 1)))
					  (endt   (any->number (vector-ref record 2))))
				      (debug:print 4 "record[1]=" (vector-ref record 1) 
						   ", startt=" startt ", endt=" endt
						   ", get-status: " (tdb:step-get-status step))
				      (if (and (number? startt)(number? endt))
					  (seconds->hr-min-sec (- endt startt)) "-1")))
	      (if (> (string-length (tdb:step-get-logfile step))
		     0)
		  (vector-set! record 5 (tdb:step-get-logfile step))))
	     (else
	      (vector-set! record 2 (tdb:step-get-state step))
	      (vector-set! record 3 (tdb:step-get-status step))
	      (vector-set! record 4 (tdb:step-get-event_time step))))
	   (hash-table-set! res (tdb:step-get-stepname step) record)
	   (debug:print 6 "record(after)  = " record 
			"\nid:       " (tdb:step-get-id step)
			"\nstepname: " (tdb:step-get-stepname step)
			"\nstate:    " (tdb:step-get-state step)
			"\nstatus:   " (tdb:step-get-status step)
			"\ntime:     " (tdb:step-get-event_time step))))
       ;; (else   (vector-set! record 1 (tdb:step-get-event_time step)))
       (sort steps (lambda (a b)
		     (cond
		      ((<   (tdb:step-get-event_time a)(tdb:step-get-event_time b)) #t)
		      ((eq? (tdb:step-get-event_time a)(tdb:step-get-event_time b)) 
		       (<   (tdb:step-get-id a)        (tdb:step-get-id b)))
		      (else #f)))))
      res))

(define (dashboard-tests:get-compressed-steps test-id #!key (work-area #f))
  (if (or (not work-area)
	  (file-exists? (conc work-area "/testdat.db")))
      (let* ((steps-data  (tdb:get-steps-for-test test-id work-area))

(define (dashboard:recalc modtime please-update-buttons last-db-update-time)
  (or please-update-buttons
      (and (> (current-milliseconds)(+ *last-recalc-ended-time* 150))
	   (> modtime last-db-update-time)
	   (> (current-seconds)(+ last-db-update-time 1)))))

(define *monitor-db-path* (conc *toppath* "/db/monitor.db"))
(define *last-monitor-update-time* 0)

;; Force creation of the db in case it isn't already there.
(let ((db (tasks:open-db)))
  (sqlite3:finalize! db))

(define (dashboard:run-update x)

  (if (not *toppath*)
      (if (not (setup-for-run))
	  (begin
	    (debug:print 0 "ERROR: Attempted to open db when not in megatest area. Exiting.")
	    (exit))))
  (let* ((dbpath    (conc *toppath* "/megatest.db")) ;; fname)
	 (dbexists  (file-exists? dbpath))

	 (db        (sqlite3:open-database dbpath)) ;; (never-give-up-open-db dbpath))
	 (write-access (file-write-access? dbpath))
	 (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					   (string->number (args:get-arg "-override-timeout"))
					   136000)))) ;; 136000))) ;; 136000 = 2.2 minutes
    (if (and dbexists
	     (not write-access))
	(set! *db-write-access* write-access)) ;; only unset so other db's also can use this control
    (debug:print-info 11 "open-db, dbpath=" dbpath " argv=" (argv))

  (let* ((path   (configf:lookup *configdat* "setup" "tmpdb"))
	 (fname  (if path (conc path "/temp-megatest.db") #f))
	 (exists (and path (file-exists? fname)))
	 (db     (if path
		     (begin
		       (create-directory path #t)
		       (sqlite3:open-database fname))
		     (sqlite3:open-database ":memory:")))
	 (handler   (make-busy-timeout 3600)))
    (if (or (not path)
	    (not exists))
	(db:initialize db))
    (sqlite3:set-busy-handler! db handler)
    db))

(define (db:sync-to fromdb todb)
  ;; strategy
  ;;  1. Get all run-ids
  ;;  2. For each run-id 
  ;;     a. Sync that run in a transaction

     (lambda (a . b) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment)
       (set! res (cons (apply vector a b) res))) ;; id run-id testname state status event-time host cpuload diskfree uname rundir item-path run-duration final-logf comment) res)))
     db 
     qry
     )
    res))

(define (db:delete-test-records db test-id)




  (tdb:delete-test-step-records db test-id)






  (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id))

(define (db:delete-tests-for-run db run-id)
  (sqlite3:execute db "DELETE FROM tests WHERE run_id=?;" run-id))

(define (db:delete-old-deleted-test-records db)
  (let ((targtime (- (current-seconds)(* 30 24 60 60)))) ;; one month in the past
    (sqlite3:execute db "DELETE FROM tests WHERE state='DELETED' AND event_time<?;" targtime)))

;; (define (cdb:remote-run proc db . params)
;;   (if (or *db-write-access*
;; 	  (not (member proc *db:all-write-procs*)))
;;       (apply cdb:client-call *runremote* 'immediate #f *default-numtries* open-run-close proc #f params)
;;       (begin
;; 	(debug:print 0 "ERROR: Attempt to access read-only database")
;; 	#f)))

(define (rmt:roll-up-pass-fail-counts run-id test-name item-path status)
  (if (and (not (equal? item-path ""))
	   (member status '("PASS" "WARN" "FAIL" "WAIVED" "RUNNING" "CHECK" "SKIP")))
      (begin
	(db:general-call 'update-pass-fail-counts db (list run-id test-name run-id test-name))
	(if (equal? status "RUNNING")
	    (db:general-call 'top-test-set-running db (list run-id test-name))
	    (db:general-call 'top-test-set-per-pf-counts db (list run-id test-name run-id test-name)))
	#f)
      #f))

(define (db:test-get-logfile-info db run-id test-name)
  (let ((res #f))
    (sqlite3:for-each-row 
     (lambda (path final_logf)
       (set! logf final_logf)
       (set! res (list path final_logf))

		 (conc "SELECT id FROM runs WHERE " qrystr " AND id != ?;") (append keyvals (list run-id)))
	  ;; for each run starting with the most recent look to see if there is a matching test
	  ;; if found then return that matching test record
	  (debug:print 4 "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) #f
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (db:get-tests-for-run db hed (conc test-name "/" item-path) '() '() #f #f #f #f #f #f)))
		  (debug:print 4 "Got tests for run-id " run-id ", test-name " test-name ", item-path " item-path ": " results)
		  (if (and (null? results)
			   (not (null? tal)))
		      (loop (car tal)(cdr tal))
		      (if (null? results) #f
			  (car results))))))))))

	  ;; collect all matching tests for the runs then
	  ;; extract the most recent test and return that.
	  (debug:print 4 "selstr: " selstr ", qrystr: " qrystr ", keyvals: " keyvals 
		       ", previous run ids found: " prev-run-ids)
	  (if (null? prev-run-ids) '()  ;; no previous runs? return null
	      (let loop ((hed (car prev-run-ids))
			 (tal (cdr prev-run-ids)))
		(let ((results (db:get-tests-for-run db hed (conc test-name "/" item-path) '() '() #f #f #f #f #f #f)))
		  (debug:print 4 "Got tests for run-id " run-id ", test-name " test-name 
			       ", item-path " item-path " results: " (intersperse results "\n"))
		  ;; Keep only the youngest of any test/item combination
		  (for-each 
		   (lambda (testdat)
		     (let* ((full-testname (conc (db:test-get-testname testdat) "/" (db:test-get-item-path testdat)))
			    (stored-test   (hash-table-ref/default tests-hash full-testname #f)))

					(processloop (+ i 1))))
				  ))
		    (let ((exinfo (vector-ref exit-info 2))
			  (logfna (if logpro-used (conc stepname ".html") "")))
		      ;; testing if procedures called in a remote call cause problems (ans: no or so I suspect)
		      (db:teststep-set-status! #f test-id stepname "end" exinfo #f logfna work-area: test-run-dir))
		    (if logpro-used
			(rmt:test-set-log! test-id (conc stepname ".html")))
		    ;; set the test final status
		    (let* ((this-step-status (cond
					      ((and (eq? (vector-ref exit-info 2) 2) logpro-used) 'warn)
					      ((eq? (vector-ref exit-info 2) 0)                   'pass)
					      (else 'fail)))
			   (overall-status   (cond
					      ((eq? rollup-status 2) 'warn)

	 ;;        	      hostn))
	 (db              #f) ;;        (open-db)) ;; we don't want the server to be opening and closing the db unnecesarily
	 (hostname        (get-host-name))
	 (ipaddrstr       (let ((ipstr (if (string=? "-" hostn)
					   ;; (string-intersperse (map number->string (u8vector->list (hostname->ip hostname))) ".")
					   (server:get-best-guess-address hostname)
					   #f)))
			    (if ipstr ipstr hostn))) ;; hostname))) 
	 (start-port    (if (and (args:get-arg "-port")
				 (string->number (args:get-arg "-port")))
			    (string->number (args:get-arg "-port"))
			    (if (and (config-lookup  *configdat* "server" "port")
				     (string->number (config-lookup  *configdat* "server" "port")))
				(string->number (config-lookup  *configdat* "server" "port"))
				(+ 5000 (random 1001)))))

	  (set-run-config-vars run-id keyvals target) ;; (db:get-target db run-id))
	  ;; environment overrides are done *before* the remaining critical envars.
	  (alist->env-vars env-ovrd)
	  (set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals)
	  (set-item-env-vars itemdat)
	  (save-environment-as-files "megatest")
	  ;; open-run-close not needed for test-set-meta-info
	  (tests:set-full-meta-info test-id run-id 0 work-area)

	  ;; (tests:test-set-status! test-id "REMOTEHOSTSTART" "n/a" (args:get-arg "-m") #f)
	  (tests:test-force-state-status! test-id "REMOTEHOSTSTART" "n/a")
	  (thread-sleep! 0.3) ;; NFS slowness has caused grief here

	  (if (args:get-arg "-xterm")
	      (set! fullrunscript "xterm")

					  (conc "(" (db:test-get-item-path test) ")")))
				(db:test-get-state test)
				(db:test-get-status test)
				(db:test-get-run_duration test)
				(db:test-get-event_time test)
				(db:test-get-host test))
			(if (not (or (equal? (db:test-get-status test) "PASS")
			   	     (equal? (db:test-get-status test) "WARN")
				     (equal? (db:test-get-state test)  "NOT_STARTED")))
			    (begin
			      (print   "         cpuload:  " (db:test-get-cpuload test)
				     "\n         diskfree: " (db:test-get-diskfree test)
				     "\n         uname:    " (db:test-get-uname test)
				     "\n         rundir:   " (db:test-get-rundir test)
				     )

	;; (set! *transport-type* (string->symbol transport))
	(if (not (setup-for-run))
	    (begin
	      (debug:print 0 "Failed to setup, exiting")
	      (exit 1)))
	(if (and state status)
	    ;; DO NOT remote run, makes calls to the testdat.db test db.
	    (tdb:teststep-set-status! test-id step state status msg logfile work-area: work-area)
	    (begin
	      (debug:print 0 "ERROR: You must specify :state and :status with every call to -step")
	      (exit 6))))))

(if (args:get-arg "-step")
    (begin
      (megatest:step 

	  (change-directory work-area)
	  ;; can setup as client for server mode now
	  ;; (client:setup)

	  (if (args:get-arg "-load-test-data")
	      ;; has sub commands that are rdb:
	      ;; DO NOT put this one into either cdb:remote-run or open-run-close
	      (tdb:load-test-data test-id work-area: work-area))
	  (if (args:get-arg "-setlog")
	      (let ((logfname (args:get-arg "-setlog")))
		(rmt:test-set-log! test-id logfname)))
	  (if (args:get-arg "-set-toplog")
	      ;; DO NOT run remote
	      (tests:test-set-toplog! db run-id test-name (args:get-arg "-set-toplog")))
	  (if (args:get-arg "-summarize-items")
	      ;; DO NOT run remote
	      (tests:summarize-items db run-id test-id test-name #t)) ;; do force here
	  (if (args:get-arg "-runstep")

				       ((zsh bash sh ash) "2>&1 >")
				       (else ">&")))
			 (fullcmd    (conc "(" (string-intersperse 
						(cons cmd params) " ")
					   ") " redir " " logfile)))
		    ;; mark the start of the test
		    ;; DO NOT run remote
		    (tdb:teststep-set-status! test-id stepname "start" "n/a" (args:get-arg "-m") logfile work-area: work-area)
		    ;; run the test step
		    (debug:print-info 2 "Running \"" fullcmd "\" in directory \"" startingdir)
		    (change-directory startingdir)
		    (set! exitstat (system fullcmd)) ;; cmd params))
		    (set! *globalexitstatus* exitstat)
		    ;; (change-directory testpath)
		    ;; run logpro if applicable ;; (process-run "ls" (list "/foo" "2>&1" "blah.log"))
		    (if logprofile
			(let* ((htmllogfile (conc stepname ".html"))
			       (oldexitstat exitstat)
			       (cmd         (string-intersperse (list "logpro" logprofile htmllogfile "<" logfile ">" (conc stepname "_logpro.log")) " ")))
			  (debug:print-info 2 "running \"" cmd "\"")
			  (change-directory startingdir)
			  (set! exitstat (system cmd))
			  (set! *globalexitstatus* exitstat) ;; no necessary
			  (change-directory testpath)
			  (rmt:test-set-log! test-id htmllogfile)))
		    (let ((msg (args:get-arg "-m")))
		      ;; DO NOT run remote
		      (tdb:teststep-set-status! test-id stepname "end" exitstat msg logfile work-area: work-area))
		    )))
	  (if (or (args:get-arg "-test-status")
		  (args:get-arg "-set-values"))
	      (let ((newstatus (cond
				((number? status)       (if (equal? status 0) "PASS" "FAIL"))
				((and (string? status)
				      (string->number status))(if (equal? (string->number status) 0) "PASS" "FAIL"))

(define (rmt:kill-server)
  (rmt:send-receive 'kill-server '()))

;; hand off a call to one of the db:queries statements
(define (rmt:general-call stmtname . params)
  (rmt:send-receive 'general-call (append (list stmtname) params)))

(define (rmt:sync-inmem->db)
  (rmt:send-receive 'sync-inmem->db '()))

;;======================================================================
;;  K E Y S 
;;======================================================================

(define (rmt:get-key-val-pairs run-id)
  (rmt:send-receive 'get-key-val-pairs (list run-id)))

(define (rmt:get-previous-test-run-record run-id test-name item-path)
  (rmt:send-receive 'get-previous-test-run-record (list run-id test-name item-path)))

(define (rmt:get-matching-previous-test-run-records run-id test-name item-path)
  (map list->vector 
       (rmt:send-receive 'get-matching-previous-test-run-records (list run-id test-name item-path))))

(define (rmt:test-get-logfile-info run-id test-name)
  (rmt:send-receive 'test-get-logfile-info (list run-id test-name)))

(define (rmt:test-get-records-for-index-file run-id test-name)
  (rmt:send-receive 'test-get-records-for-index-file (list  run-id test-name)))

(define (rmt:get-testinfo-state-status test-id)
  (let ((res (rmt:send-receive 'get-testinfo-state-status (list test-id))))
    (if (list? res)
	(list->vector res)
	res)))

(define (rmt:test-set-log! test-id logf)
  (if (string? logf)(rmt:general-call 'test-set-log logf test-id)))

(define (rmt:test-get-paths-matching-keynames-target-new keynames target res testpatt statepatt statuspatt runname)
  (rmt:send-receive 'test-get-paths-matching-keynames-target-new (list keynames target res testpatt statepatt statuspatt runname)))

  (sqlite3:execute mdb (conc "DELETE FROM tasks_queue WHERE id IN (" task-ids ");")))

;; 
(define (tasks:start-monitor db mdb)
  (if (> (tasks:get-num-alive-monitors mdb) 2) ;; have two running, no need for more
      (debug:print-info 1 "Not starting monitor, already have more than two running")
      (let* ((megatestdb     (conc *toppath* "/megatest.db"))
	     (monitordbf     (conc *toppath* "/db/monitor.db"))
	     (last-db-update 0)) ;; (file-modification-time megatestdb)))
	(task:register-monitor mdb)
	(let loop ((count      0)
		   (next-touch 0)) ;; next-touch is the time where we need to update last_update
	  ;; if the db has been modified we'd best look at the task queue
	  (let ((modtime (file-modification-time megatestdbpath )))
	    (if (> modtime last-db-update)

#
# run some tests

BINPATH=$(shell readlink -m $(PWD)/../bin)
MEGATEST=$(BINPATH)/megatest
DASHBOARD=$(BINPATH)/dashboard
PATH := $(BINPATH):$(PATH)
RUNNAME := $(shell date +w%V.%u.%H.%M)
IPADDR := "-"
# Set SERVER to "-server -"
SERVER  = 
DEBUG   = 1
LOGGING = 

# Some simple checks for bootstrapping and run loop logic 

test9 : minsetup test9a test9b test9c test9d test9e

test9a :
	@echo Run super-simple mintest e, no waitons.
	cd mintest;$(MEGATEST) -runtests e -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9b :
	@echo Run simple mintest d with one waiton c
	cd mintest;$(MEGATEST) -runtests d -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9c :
	@echo Run mintest a with full waiton chain a -> b -> c -> d -> e
	cd mintest;$(MEGATEST) -runtests a -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9d :
	@echo Run an itemized test with no items
	cd mintest;$(MEGATEST) -runtests g -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test9e :
	@echo Run mintest a1 with full waiton chain with d1fail: a1 -> b1 -> c1 -> d1fail -> e1
	cd mintest;$(MEGATEST) -runtests a1 -target $(VER) :runname `date +%H.%M.%S` -debug $(DEBUG)

test10 :
	@echo Run a bunch of different targets simultaneously
	(cd fullrun;$(MEGATEST) -server - ;sleep 2)&
	for targ in mint/btrfs/mintdir sunos/sshfs/loc; do \
	   (cd fullrun;$(MEGATEST) -runtests priority_10_waiton_1 -target $$targ :runname $(RUNNAME) &); done
	for sys in ubuntu suse redhat debian;do \
	  for fs in afs nfs zfs; do \
	     for dpath in none tmp; do \
	        (cd fullrun;$(MEGATEST) -runtests priority_10_waiton_1 -target $$sys/$$fs/$$dpath :runname $(RUNNAME) &);\
	     done;done;done

test11 :
	 cd fullrun;time (for a in 1 2 3 4 5 6 7 8 9 10  1 2 3 4 5 6 7 8 9 10  1 2 3 4 5 6 7 8 9 10  1 2 3 4 5 6 7 8 9 10 ;do   (megatest -test-paths -target %/%/% > /dev/null ) & done; wait; )

minsetup : 
	cd ..;make && make install
	mkdir -p mintest/runs mintest/links
	cd mintest;$(MEGATEST) -stop-server 0
	cd mintest;$(MEGATEST) -server - -debug $(DEBUG) > server.log 2> server.log & 
	sleep 3
	cd mintest;$(DASHBOARD) -rows 18 &

cleanprep : ../*.scm Makefile */*.config
	mkdir -p fullrun/tmp/mt_runs fullrun/tmp/mt_links
	cd ..;make;make install
	rm -f */logging.db
	touch cleanprep

	cd fullrun;$(MEGATEST) -remove-runs :runname $(RUN)  -testpatt % -itempatt % :sysname % :fsname % :datapath %

clean  : 
	rm cleanprep

kill :
	killall -v mtest main.sh dboard || true
	rm -rf */megatest.db */logging.db */monitor.db fullrun/tmp/mt_*/* || true
	killall -v mtest dboard || true

hardkill : kill
	sleep 2;killall -v mtest main.sh dboard -9

listservers :
	cd fullrun;$(MEGATEST) -list-servers

runforever :
	while(ls); do runname=`date +%F-%R:%S`;(cd fullrun;$(MEGATEST) -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname;/home/matt/data/megatest/megatest -runall -target ubuntu/nfs/none :runname $$runname);done

[fields]
X TEXT

[setup]
max_concurrent_jobs 50
linktree #{getenv PWD}/linktree
transport http

[server]
port 8090

[jobtools]
useshell yes
launcher nbfind

#!/bin/bash

# Usage: rununittest.sh testname debuglevel
#

# Clean setup
#
rm -f simplerun/megatest.db simplerun/monitor.db simplerun/db/monitor.db
rm -rf simplelinks/ simpleruns/
mkdir -p simplelinks simpleruns
(cd simplerun;cp ../../*_records.scm .;perl -pi.bak -e 's/define-inline/define/' *_records.scm)

# Run the test $1 is the unit test to run
cd simplerun;echo '(load "../tests.scm")' | ../../bin/megatest -repl -debug $2 $1

;;======================================================================
;; S E R V E R
;;======================================================================

;; Run like this:
;;
;;  (cd ..;make && make install) && ./rununittest.sh server 1;(cd simplerun;megatest -stop-server 0)

(set! *transport-type* 'http)

(system "cp ../fullrun/megatest.db megatest.db")

(test "open inmem db"          1  (begin (open-in-mem-db) 1))

(test "setup for run" #t (begin (setup-for-run)
				(string? (getenv "MT_RUN_AREA_HOME"))))

(system "megatest -server - -debug 0 &")

(thread-sleep! 3) ;; need to wait for server to start. Yes, a better way is needed.

(define *keys*               (keys:config-get-fields *configdat*))
(define *keyvals*            (keys:target->keyval *keys* "a/b/c"))

(test #f #t                       (string? (car *runremote*)))
(test #f '(#t "successful login") (rmt:login)) ;;  *runremote* *toppath* *my-client-signature*)))

(define inmem (open-in-mem-db))

(define (inmem-test t b)
  (test "inmem sync to"   t (db:sync-to *db* inmem))
  (test "inmem sync back" b (db:sync-to inmem *db*)))

(inmem-test 0 0)

(inmem-test 1 1)

;;======================================================================
;; D B
;;======================================================================

(test #f '(#t "exit process started") (rmt:kill-server)) ;; *toppath* *my-client-signature* #f)))

 

;;======================================================================
;; S E R V E R
;;======================================================================

;; Run like this:
;;
;;  (cd ..;make && make install) && ./rununittest.sh server 1;(cd simplerun;megatest -stop-server 0)

(set! *transport-type* 'http)



(test "setup for run" #t (begin (setup-for-run)
				(string? (getenv "MT_RUN_AREA_HOME"))))

(test "server-register, get-best-server" #t (let ((res #f))
					      (open-run-close tasks:server-register tasks:open-db 1 "bob" 1234 100 'live 'http)
					      (set! res (open-run-close tasks:get-best-server tasks:open-db))
					      (number? (vector-ref res 3))))

(test "de-register server" #f (let ((res #f))
				(open-run-close tasks:server-deregister tasks:open-db "bob" port: 1234)
				(vector? (open-run-close tasks:get-best-server tasks:open-db))))

(define server-pid #f)

;; Not sure how the following should work, replacing it with system of megatest -server
;; (test "launch server" #t (let ((pid (process-fork (lambda ()
;; 						    ;; (daemon:ize)
;; 						    (server:launch 'http)))))
;; 			   (set! server-pid pid)
;; 			   (number? pid)))
(system "../../bin/megatest -server - -debug 22 > server.log 2> server.log &")

(let loop ((n 10))
  (thread-sleep! 1) ;; need to wait for server to start.
  (let ((res (open-run-close tasks:get-best-server tasks:open-db)))
    (print "tasks:get-best-server returned " res)
    (if (and (not res)
	     (> n 0))
	(loop (- n 1)))))

(test "get-best-server" #t (begin 
			     (client:launch)
			     (let ((dat (open-run-close tasks:get-best-server tasks:open-db)))
			       (vector? dat))))

(define *keys*               (keys:config-get-fields *configdat*))
(define *keyvals*            (keys:target->keyval *keys* "a/b/c"))

(test #f #t                       (string? (car *runremote*)))
(test #f '(#t "successful login") (rmt:login)) ;;  *runremote* *toppath* *my-client-signature*)))








(test #f #f                       (rmt:get-test-info-by-id 99)) ;; get non-existant test

;; RUNS
(test #f 1                        (rmt:register-run  *keyvals* "firstrun" "new" "n/a" (current-user-name)))
(test "get run info"  "firstrun"  (let ((rinfo (rmt:get-run-info 1)))
				    (vector-ref (vector-ref rinfo 1) 3)))
(test "get runname from id" "firstrun" (rmt:get-run-name-from-id 1))

;; TESTS
(test "get tests (no data)" '()   (rmt:get-tests-for-run 1 "%" '() '() #f #f #f #f #f #f))
(test "register test"       #t    (rmt:general-call 'register-test 1 "test1" ""))
(test "get tests (some data)"  1  (length (rmt:get-tests-for-run 1 "%" '() '() #f #f #f #f #f #f)))
(test "get test id"            1  (rmt:get-test-id 1 "test1" ""))
(test "sync back"              #t (> (rmt:sync-inmem->db) 0))


(test "get test id from main"  1  (db:get-test-id *db* 1 "test1" ""))
(test "get keys"               #t (list? (rmt:get-keys)))
(test "set comment"            #t (begin (rmt:general-call 'set-test-comment "this is a comment" 1) #t))
(test "get comment" "this is a comment" (let ((trec (rmt:get-test-info-by-id 1)))
					  (db:test-get-comment trec)))

;; MORE RUNS
(test "get runs"  #t (let* ((runs   (rmt:get-runs "%" #f #f '()))
			    (header (vector-ref runs 0))
			    (data   (vector-ref runs 1)))
		       (and (list?   header)
			    (list?   data)
			    (vector? (car data)))))

(test "get local testinfo" "test1" (vector-ref (db:get-testinfo-state-status *db* 1) 2))
(test "get testinfo"       "test1" (vector-ref (rmt:get-testinfo-state-status 1) 2))

;;======================================================================
;; D B
;;======================================================================

(test #f '(#t "exit process started") (rmt:kill-server)) ;; *toppath* *my-client-signature* #f)))