Megatest

    delete-run
    lock/unlock-run
    update-run-event_time
    mark-incomplete
    set-state-status-and-roll-up-run
    ;; STEPS
    teststep-set-status!
    delete-steps-for-test
    ;; TEST DATA
    test-data-rollup
    csv->test-data

    ;; MISC
    sync-inmem->db

                   ((update-run-event_time)        (apply db:update-run-event_time dbstruct params))
                   ((update-run-stats)             (apply db:update-run-stats dbstruct params))
                   ((set-var)                      (apply db:set-var dbstruct params))
                   ((del-var)                      (apply db:del-var dbstruct params))

                   ;; STEPS
                   ((teststep-set-status!)         (apply db:teststep-set-status! dbstruct params))
                   ((delete-steps-for-test!)        (apply db:delete-steps-for-test! dbstruct params))
                   
                   ;; TEST DATA
                   ((test-data-rollup)             (apply db:test-data-rollup dbstruct params))
                   ((csv->test-data)               (apply db:csv->test-data dbstruct params))

                   ;; MISC
                   ((sync-inmem->db)               (let ((run-id (car params)))
                                                     (db:sync-touched dbstruct run-id force-sync: #t)))

		    (if (and start-res
			     ping-res)
			(let ((runremote (or area-dat *runremote*))) ;; it might have been generated only a few statements ago
			  (remote-conndat-set! runremote start-res) ;; (hash-table-set! runremote run-id start-res)
			  (debug:print-info 2 *default-log-port* "connected to " (http-transport:server-dat-make-url start-res))
			  start-res)
			(begin    ;; login failed but have a server record, clean out the record and try again
			  (debug:print-info 0 *default-log-port* "client:setup, login unsuccessful, will attempt to start server ... start-res=" start-res ", server-dat=" server-dat) ;; had runid.  Fixes part of Randy;s ticket 1405717332
			  (case *transport-type* 
			    ((http)(http-transport:close-connections)))
			  (remote-conndat-set! runremote #f)  ;; (hash-table-delete! runremote run-id)
			  (thread-sleep! 1)
			  (client:setup-http areapath remaining-tries: (- remaining-tries 1))
			  )))
		  (begin    ;; no server registered

           (else (car argv))))
         (fullpath (realpath this-script)))
    fullpath))
(define *common:this-exe-fullpath* (common:get-this-exe-fullpath))
(define *common:this-exe-dir*      (pathname-directory *common:this-exe-fullpath*))
(define *common:this-exe-name*     (pathname-strip-directory *common:this-exe-fullpath*))

(define *common:logpro-exit-code->status-sym-alist*
  '( ( 0 . pass )
     ( 1 . fail )
     ( 2 . warn )
     ( 3 . check )
     ( 4 . waived )
     ( 5 . abort )
     ( 6 . skip )))

(define (common:logpro-exit-code->status-sym exit-code)
  (or (alist-ref exit-code *common:logpro-exit-code->status-sym-alist*) 'fail))

(define (common:worse-status-sym ss1 ss2)
  (let loop ((status-syms-remaining '(abort fail check skip warn waived pass)))
    (cond
     ((null? status-syms-remaining)
      'fail)
     ((eq? (car status-syms-remaining) ss1)
      ss1)
     ((eq? (car status-syms-remaining) ss2)
      ss2)
     (else
      (loop (cdr status-syms-remaining))))))

(define (common:steps-can-proceed-given-status-sym status-sym)
  (if (member status-sym '(warn waived pass))
      #t
      #f))

(define (status-sym->string status-sym)
  (case status-sym
      ((pass) "PASS")
    ((fail) "FAIL")
    ((warn) "WARN")
    ((check) "CHECK")
    ((waived) "WAIVED")
    ((abort) "ABORT")
    ((skip) "SKIP")
    (else "FAIL")))

(define (common:logpro-exit-code->test-status exit-code)
  (status-sym->string (common:logpro-exit-code->status-sym exit-code)))

(defstruct remote
  (hh-dat            (common:get-homehost)) ;; homehost record ( addr . hhflag )
  (server-url        (if *toppath* (server:check-if-running *toppath*))) ;; (server:check-if-running *toppath*) #f))
  (last-server-check 0)  ;; last time we checked to see if the server was alive
  (conndat           #f)
  (transport         *transport-type*)

;;
(define (common:rotate-logs)
  (if (not (directory-exists? "logs"))(create-directory "logs"))
  (directory-fold 
   (lambda (file rem)
     (handle-exceptions
      exn
      (debug:print-info 0 *default-log-port* "unable to rotate log " file ", probably handled by another process.")
      (let* ((fullname (conc "logs/" file))
             (file-age (- (current-seconds)(file-modification-time fullname))))
        (if (or (and (string-match "^.*.log" file)
                     (> (file-size fullname) 200000))
                (and (string-match "^server-.*.log" file)
                     (> (- (current-seconds) (file-modification-time fullname))
                        (* 8 60 60))))

	    (debug:print-info 13 *default-log-port* "after db:setup with dbstruct=" dbstruct)
	    (cond
	     ((dbr:dbstruct-read-only dbstruct)
	      (debug:print-info 13 *default-log-port* "loading read-only watchdog")
	      (common:readonly-watchdog dbstruct))
	     (else
	      (debug:print-info 13 *default-log-port* "loading writable-watchdog.")
              (let* ((syncer (or (configf:lookup *configdat* "server" "sync-method") "brute-force-sync")))
                (cond
                 ((equal? syncer "brute-force-sync")
                  (server:writable-watchdog-bruteforce dbstruct))
                 ((equal? syncer "delta-sync")
                  (server:writable-watchdog-deltasync dbstruct))
                 (else
                  (debug:print-error 0 *default-log-port* "Unknown server/sync-method specified ("syncer") - valid values are brute-force-sync and delta-sync.")
                  (exit 1)))
                ;;(debug:print 1 *default-log-port* "INFO: ["(common:human-time)"] Syncer started (method="syncer")")
                )))
	    (debug:print-info 13 *default-log-port* "watchdog done."))
	  (debug:print-info 13 *default-log-port* "no need for watchdog on non-homehost"))))


(define (std-exit-procedure)
  ;;(common:telemetry-log-close)
  (on-exit (lambda () 0))

                                         (iup:attribute-set! steps-matrix "BGCOLOR0:7" "149 208 252")
                                         (iup:attribute-set! steps-matrix "0:9" "rerun & continue")
					 (iup:attribute-set! steps-matrix "ALIGNMENT1" "ALEFT")
					 ;; (iup:attribute-set! steps-matrix "FIXTOTEXT" "C1")
					 (iup:attribute-set! steps-matrix "RESIZEMATRIX" "YES")
					 (let ((proc
						(lambda (testdat)
						  (dcommon:populate-steps teststeps steps-matrix run-id test-id))))
					   (hash-table-set! widgets "StepsMatrix" proc)
					   (proc testdat))
					 steps-matrix)
				       ;; populate the Test Data panel
				       (iup:frame
					#:title "Test Data"
					(let ((test-data

                (readyfname  (conc parent-dir "/.ready-" raw-fname))
                (readyexists (common:file-exists? readyfname)))
           (if (not readyexists)
               (common:simple-file-lock-and-wait lockfname))
           (let ((db      (sqlite3:open-database fname)))
             (sqlite3:set-busy-handler! db (make-busy-timeout 136000))
             (sqlite3:execute db "PRAGMA synchronous = 0;")


             (if (and (configf:lookup *configdat* "setup" "tmp_mode") (string-match "^/tmp/.*" fname))
                 (begin
                   ;;(print "DEBUG: Setting tmp_mode for " fname) 
                   (sqlite3:execute db (configf:lookup *configdat* "setup" "tmp_mode"))
                   )
                 )  
             (if (and (configf:lookup *configdat* "setup" "nfs_mode") (not (string-match "^/tmp/.*" fname)))
                 (begin
                   ;;(print "DEBUG: Setting nfs_mode for " fname)
                   (sqlite3:execute db (configf:lookup *configdat* "setup" "nfs_mode"))
                   )
                 )  
             (if (and (not (or (configf:lookup *configdat* "setup" "tmp_mode") (configf:lookup *configdat* "setup" "nfs_mode")))  
                      (configf:lookup *configdat* "setup" "use-wal")
                      (string-match "^/tmp/.*" fname)) ;; this is a file in /tmp
                 (sqlite3:execute db "PRAGMA journal_mode=WAL;")
                 (debug:print 2 *default-log-port* "Creating " fname " in NON-WAL mode."))
             (if (not file-exists)
                 (initproc db))
             (if (not readyexists)
                 (begin
                   (common:simple-file-release-lock lockfname)
                   (with-output-to-file
                       readyfname
                     (lambda ()
                       (print "Ready at " 

   (lambda (db)
     (sqlite3:execute 
      db
      "INSERT OR REPLACE into test_steps (test_id,stepname,state,status,event_time,comment,logfile) VALUES(?,?,?,?,?,?,?);"
      test-id teststep-name state-in status-in (current-seconds)
      (if comment comment "")
      (if logfile logfile "")))))



(define (db:delete-steps-for-test! dbstruct run-id test-id)
  ;; TODO: figure out why status is the key field rather than state (note:  CONSTRAINT test_steps_constraint UNIQUE (test_id,stepname,state) )
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (db)
     (sqlite3:execute 
      db
      "UPDATE test_steps set status='DELETED' where test_id=?" ;;  and run_id=? !! - run_id not in table (bummer) TODO: get run_id into schema for test_steps
      test-id))))


;; db-get-test-steps-for-run
(define (db:get-steps-for-test dbstruct run-id test-id)
  (db:with-db
   dbstruct
   run-id
   #f
   (lambda (db)

						 (hash-table-keys tests-info)))))))
     canvas-obj)))

;;======================================================================
;;  S T E P S
;;======================================================================

(define (dcommon:populate-steps teststeps steps-matrix run-id test-id)
  (let* ((max-row       0)
	 (max-col       9)
         (white         "255 255 255")
         
         (testinfo      (rmt:get-testinfo-state-status run-id test-id))
         (state         (db:test-get-state testinfo))
         (status        (db:test-get-status testinfo))
         (test-status-color (car (gutils:get-color-for-state-status state status)))
         (running-color (car (gutils:get-color-for-state-status "RUNNING" "STARTED")))
         (failcolor     (car (gutils:get-color-for-state-status "COMPLETED" "FAIL"))))
    (if (null? teststeps)
	(begin
          (iup:attribute-set! steps-matrix "CLEARATTRIB" "CONTENTS")
          (iup:attribute-set! steps-matrix "CLEARVALUE" "CONTENTS"))
	(let loop ((hed    (car teststeps))
		   (tal    (cdr teststeps))
		   (rownum 1)
		   (colnum 1))
	  (if (> rownum max-row)(set! max-row rownum))
	  (let* ((status  (vector-ref hed 3))
                 (val     (vector-ref hed (- colnum 1)))
                 (bgcolor (cond
                           ((member (conc status) '("" "-" "#<unspecified>"))
                            running-color)
                           
                           ((member (conc status) '("0" 0))
                            white)
                           (else test-status-color)))
                          ; (else failcolor)))
		 (mtrx-rc (conc rownum ":" colnum)))
            ;;(print "BB> status=>"status"< bgcolor="bgcolor)
	    (iup:attribute-set! steps-matrix  mtrx-rc (if val (conc val) ""))
            (if (< colnum 5)
                (iup:attribute-set! steps-matrix  (conc "BGCOLOR" mtrx-rc) bgcolor))
	    (if (< colnum max-col)
		(loop hed tal rownum (+ colnum 1))

;;(rmt:get-test-info-by-id run-id test-id) -> testdat



(define (ezsteps:run-from testdat start-step-name run-one)
  ;;# TODO - recapture item variables, debug repeated step eval; regen logpro from test
  (let* ((do-update-test-state-status #f)
         (test-run-dir  ;; (filedb:get-path *fdb* 
	  (db:test-get-rundir testdat)) ;; )
	 (testconfig    (read-config (conc test-run-dir "/testconfig") #f #t environ-patt: "pre-launch-env-vars"))
	 (ezstepslst    (hash-table-ref/default testconfig "ezsteps" '()))
	 (run-mutex     (make-mutex))
	 (rollup-status 0)
         (rollup-status-string #f)
         (rollup-status-sym #f)
	 (exit-info     (vector #t #t #t))
	 (test-id       (db:test-get-id        testdat))
	 (run-id        (db:test-get-run_id    testdat))
	 (test-name     (db:test-get-testname  testdat))
         (orig-test-state (db:test-get-state   testdat))
         (orig-test-status (db:test-get-status testdat))
	 (kill-job      #f)) ;; for future use (on re-factoring with launch.scm code

    ;; keep trying till NFS deigns to populate test run dir on this host
    (let loop ((count 5))
      (if (not (common:file-exists? test-run-dir))
	  ;;(push-directory test-run-dir)
	  (if (> count 0)
	      (begin
		(debug:print 0 *default-log-port* "WARNING: ezsteps attempting to run but test run directory " test-run-dir " is not there. Waiting and trying again " count " more times")
		(sleep 3)
		(loop (- count 1))))))
    
    (debug:print-info 0 *default-log-port* "Running in directory " test-run-dir)
    (if (not (common:file-exists? ".ezsteps"))(create-directory ".ezsteps"))
    ;; if ezsteps was defined then we are sure to have at least one step but check anyway
    
    (if (not (> (length ezstepslst) 0))
	(message-window "ERROR: You can only re-run steps defined via ezsteps")
	(begin
	  (let loop ((ezstep   (car ezstepslst))
		     (tal      (cdr ezstepslst))
                     (status-sym-so-far 'pass)
		     ;;(runflag  #f)
                     (saw-start-step-name #f)) ;; flag used to skip steps when not starting at the beginning
	    (if (vector-ref exit-info 1)
		(let* ((stepname    (car ezstep))  ;; do stuff to run the step
                       (logpro-used (common:file-exists? (conc test-run-dir "/" stepname ".logpro")))
		       (stepinfo    (cadr ezstep))
		       (stepparts   (string-match (regexp "^(\\{([^\\}]*)\\}\\s*|)(.*)$") stepinfo))
		       (stepparms   (list-ref stepparts 2)) ;; for future use, {VAR=1,2,3}, run step for each 
		       (stepcmd     (list-ref stepparts 3))
		       (script      (conc "mt_ezstep '"test-run-dir"' '"stepname"' '"stepcmd"'")) ;; call the command using mt_ezstep

                       (saw-start-step-name-next (or saw-start-step-name (equal? stepname start-step-name)))
                       (proceed-with-this-step
                        (or (not start-step-name)

                            (equal? stepname start-step-name)
                            (and saw-start-step-name (not run-one))
                            saw-start-step-name-next
                            (and start-step-name (equal? stepname start-step-name))))
                       )
                  (set! do-update-test-state-status (and proceed-with-this-step (null? tal)))
                  ;;(BB> "stepname="stepname" proceed-with-this-step="proceed-with-this-step " do-update-test-state-status="do-update-test-state-status " orig-test-state="orig-test-state" orig-test-status="orig-test-status)
                  (cond
                   ((and (not proceed-with-this-step) (null? tal))
                    'done)
                   ((not proceed-with-this-step)
                      (loop (car tal)
                            (cdr tal)
                            status-sym-so-far
                            saw-start-step-name-next))
                   (else
		    (debug:print 4 *default-log-port* "ezsteps:\n stepname: " stepname " stepinfo: " stepinfo " stepparts: " stepparts
			         " stepparms: " stepparms " stepcmd: " stepcmd)






		    (debug:print 4 *default-log-port* "script: " script)
		    (rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f)

		    ;; now launch the script
		    (let ((pid (process-run script)))
		      (let processloop ((i 0))
		        (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
			  (mutex-lock! run-mutex)
			  (vector-set! exit-info 0 pid)
			  (vector-set! exit-info 1 exit-status)
			  (vector-set! exit-info 2 exit-code)
			  (mutex-unlock! run-mutex)
			  (if (eq? pid-val 0)
			      (begin
			        (thread-sleep! 1)
			        (processloop (+ i 1))))
			  ))
		      (let ((exinfo (vector-ref exit-info 2))
			    (logfna (if logpro-used (conc stepname ".html") "")))
		        (rmt:teststep-set-status! run-id test-id stepname "end" exinfo #f logfna))
                      
		      (if logpro-used
			  (rmt:test-set-log! run-id test-id (conc stepname ".html")))
                      
		      ;; set the test final status
		      (let* ((this-step-status      (cond
                                                     (logpro-used
                                                      (common:logpro-exit-code->status-sym (vector-ref exit-info 2)))
					             ((eq? (vector-ref exit-info 2) 0)
                                                      'pass)
					             (else



                                                      'fail)))

			     (overall-status-sym    (common:worse-status-sym this-step-status status-sym-so-far))
                             (overall-status-string (status-sym->string overall-status-sym)))


		        (debug:print 4 *default-log-port* "Exit value received: " (vector-ref exit-info 2) " logpro-used: " logpro-used 
				     " this-step-status: " this-step-status " overall-status: " overall-status-sym) 
		        ;;" next-status: " next-status " rollup-status: " rollup-status)


                        (set! rollup-status-string overall-status-string)







                        (set! rollup-status-sym overall-status-sym)
                        (tests:test-set-status! run-id test-id "RUNNING" overall-status-string #f #f)))

                    (if (and
                         (not run-one)
                         (common:steps-can-proceed-given-status-sym rollup-status-sym)
                         (not (null? tal)))

                        (loop (car tal)
                              (cdr tal)
                              rollup-status-sym
                              saw-start-step-name-next)))))
		(debug:print 4 *default-log-port* "WARNING: a prior step failed, stopping at " ezstep)))
	  
	  ;; Once done with step/steps update the test record
	  ;;
	  (let* ((item-path (db:test-get-item-path testdat)) ;; (item-list->path itemdat))
		 (testinfo  (rmt:get-testinfo-state-status run-id test-id))) ;; refresh the testdat, call it iteminfo in case need prev/curr
	    ;; Am I completed?
	    (if (equal? (db:test-get-state testinfo) "RUNNING") ;; (not (equal? (db:test-get-state testinfo) "COMPLETED"))
		(let ((new-state  (if kill-job "KILLED" "COMPLETED") ;; (if (eq? (vector-ref exit-info 2) 0) ;; exited with "good" status
				  ;; "COMPLETED"
				  ;; (db:test-get-state testinfo)))   ;; else preseve the state as set within the test
				  )
                      (new-status rollup-status-string)








                      ) ;; (db:test-get-status testinfo)))
		  (debug:print-info 2 *default-log-port* "Test NOT logged as COMPLETED, (state=" (db:test-get-state testinfo) "), updating result, rollup-status is " rollup-status)
		  (tests:test-set-status! run-id test-id 
					  (if do-update-test-state-status new-state orig-test-state)
					  (if do-update-test-state-status new-status orig-test-status)
					  (args:get-arg "-m") #f)
		  ;; need to update the top test record if PASS or FAIL and this is a subtest
		  (if (and (not (equal? item-path "")) do-update-test-state-status)
                      (rmt:set-state-status-and-roll-up-items run-id test-name item-path new-state new-status #f))))
	    ;; for automated creation of the rollup html file this is a good place...
	    (if (not (equal? item-path ""))
	      (tests:summarize-items run-id test-id test-name #f)) ;; don't force - just update if no
	    )))
    ;;(pop-directory)
    rollup-status-string))

(define (ezsteps:spawn-run-from testdat start-step-name run-one)
  (thread-start! 
   (make-thread
    (lambda ()
      (ezsteps:run-from testdat start-step-name run-one))
    (conc "ezstep run single step " start-step-name " run-one="run-one)))

0 0 0 1 2 3 4 5 6

	  ;;  )
	  (cond
	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig) ;;; TODO: deprecate me in favor of ezsteps.scm
  (let* ((stepname       (car ezstep))  ;; do stuff to run the step
	 (stepinfo       (cadr ezstep))
	;; (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) "" info)))
	;; (stepproc       (let ((info (cadr ezstep)))
	;; 		   (if (proc? info) info #f)))
	 (stepparts      (string-match (regexp "^(\\{([^\\}\\{]*)\\}\\s*|)(.*)$") stepinfo))

	      ;; (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
              (rmt:general-call 'set-test-start-time #f test-id)
	      (rmt:test-set-state-status run-id test-id "REMOTEHOSTSTART" "n/a" #f)
	      )
	     (else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))

          ;; cleanup prior execution's steps
          (rmt:delete-steps-for-test! run-id test-id)
          
	  (debug:print 2 *default-log-port* "Executing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force-reread: #t))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting") 

;;     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1.1101 ... 1.99,2.00..

(declare (unit megatest-version))

(define megatest-version 1.6530)

                                ;; "%" ;; (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                (common:args-get-testpatt #f) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: statuses
                                new-state-status: "NOT_STARTED,n/a")))
         ;; RERUN ALL
         (if (args:get-arg "-rerun-all") ;; first set states/statuses correct
             (let* ((rconfig (full-runconfigs-read)))
               (hash-table-set! args:arg-hash "-preclean" #t)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                (common:args-get-testpatt rconfig) ;; (args:get-arg "-testpatt")
                                state:  #f
                                ;; status: statuses
                                new-state-status: "NOT_STARTED,n/a")
               (runs:clean-cache target runname *toppath*)
               (runs:operate-on 'set-state-status
                                target
                                (common:args-get-runname)  ;; (or (args:get-arg "-runname")(args:get-arg ":runname"))
                                (common:args-get-testpatt rconfig) ;; (args:get-arg "-testpatt")
                                ;; state:  states
                                status: #f
                                new-state-status: "NOT_STARTED,n/a")))
         (let* ((config-reruns      (let ((x (configf:lookup *configdat* "setup" "reruns")))
			       				(if x (string->number x) #f)))
               (rerun-cnt (if config-reruns
                              config-reruns

  (let* ((state     (items:check-valid-items "state" state-in))
	 (status    (items:check-valid-items "status" status-in)))
    (if (or (not state)(not status))
	(debug:print 3 *default-log-port* "WARNING: Invalid " (if status "status" "state")
		     " value \"" (if status state-in status-in) "\", update your validvalues section in megatest.config"))
    (rmt:send-receive 'teststep-set-status! run-id (list run-id test-id teststep-name state-in status-in comment logfile))))


(define (rmt:delete-steps-for-test! run-id test-id)
  (rmt:send-receive 'delete-steps-for-test! run-id (list run-id test-id)))

(define (rmt:get-steps-for-test run-id test-id)
  (rmt:send-receive 'get-steps-for-test run-id (list run-id test-id)))

(define (rmt:get-steps-info-by-id test-step-id)
  (rmt:send-receive 'get-steps-info-by-id #f (list test-step-id)))

;;======================================================================

                    ))
              (BB> "End do-a-sync with fork-to-background="fork-to-background" persist-until-sync="persist-until-sync" and result="finalres)
              finalres)
            ) ;; end lambda
          ))
    do-a-sync))

(define (server:writable-watchdog-bruteforce dbstruct)
  (thread-sleep! 1) ;; delay for startup
  (let* ((do-a-sync  (server:get-bruteforce-syncer dbstruct))
         (final-sync (server:get-bruteforce-syncer dbstruct fork-to-background: #t persist-until-sync: #t)))
    (when (and (not (args:get-arg "-sync-to-megatest.db")) ;; conditions under which we do not run the sync
	       (args:get-arg "-server"))
      
      (let loop ()
	(do-a-sync)
        (if (not *time-to-exit*) (loop))) ;; keep going unless time to exit

      ;; time to exit, close the no-sync db here
      (final-sync)

      (if (common:low-noise-print 30)
	  (debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id)
			    )))))

(define (server:writable-watchdog-deltasync dbstruct)
  (thread-sleep! 0.05) ;; delay for startup
  (let ((legacy-sync  (common:run-sync?))
        (sync-stale-seconds (configf:lookup-number *configdat* "server" "sync-stale-seconds" default: 300))
	(debug-mode   (debug:debug-mode 1))
	(last-time    (current-seconds))
	(no-sync-db   (db:open-no-sync-db))
        (sync-duration 0) ;; run time of the sync in milliseconds
        ;;(this-wd-num  (begin (mutex-lock! *wdnum*mutex) (let ((x *wdnum*)) (set! *wdnum* (add1 *wdnum*)) (mutex-unlock! *wdnum*mutex) x)))
        )
    (set! *no-sync-db* no-sync-db) ;; make the no sync db available to api calls
    (debug:print-info 2 *default-log-port* "Periodic sync thread started.")
    (debug:print-info 3 *default-log-port* "watchdog starting. legacy-sync is " legacy-sync" pid="(current-process-id)  );;  " this-wd-num="this-wd-num)
    (if (and legacy-sync (not *time-to-exit*))
	(let* (;;(dbstruct (db:setup))
	       (mtdb       (dbr:dbstruct-mtdb dbstruct))
	       (mtpath     (db:dbdat-get-path mtdb))
	       (tmp-area   (common:get-db-tmp-area))
	       (start-file (conc tmp-area "/.start-sync"))
	       (end-file   (conc tmp-area "/.end-sync")))
	  (debug:print-info 0 *default-log-port* "Server running, periodic sync started.")
	  (let loop ()
	    ;; sync for filesystem local db writes
	    ;;
	    (mutex-lock! *db-multi-sync-mutex*)
	    (let* ((need-sync        (>= *db-last-access* *db-last-sync*)) ;; no sync since last write
		   (sync-in-progress *db-sync-in-progress*)
                   (min-intersync-delay (configf:lookup-number *configdat* "server" "minimum-intersync-delay" default: 5))
		   (should-sync      (and (not *time-to-exit*)
                                          (> (- (current-seconds) *db-last-sync*) min-intersync-delay))) ;; sync every five seconds minimum, deprecated logic, can probably be removed
		   (start-time       (current-seconds))
                   (cpu-load-adj     (alist-ref 'adj-proc-load (common:get-normalized-cpu-load #f)))
		   (mt-mod-time      (file-modification-time mtpath))
		   (last-sync-start  (if (common:file-exists? start-file)
					 (file-modification-time start-file)
					 0))
		   (last-sync-end    (if (common:file-exists? end-file)
					 (file-modification-time end-file)
					 10))
                   (sync-period      (+ 3 (* cpu-load-adj 30))) ;; as adjusted load increases increase the sync period
		   (recently-synced  (and (< (- start-time mt-mod-time) sync-period) ;; not useful if sync didn't modify megatest.db!
					  (< mt-mod-time last-sync-start)))
		   (sync-done        (<= last-sync-start last-sync-end))
                   (sync-stale       (> start-time (+ last-sync-start sync-stale-seconds)))
		   (will-sync        (and (not *time-to-exit*)       ;; do not start a sync if we are in the process of exiting
                                          (or need-sync should-sync)
					  (or sync-done sync-stale)
					  (not sync-in-progress)
					  (not recently-synced))))
              (debug:print-info 13 *default-log-port* "WD writable-watchdog top of loop.  need-sync="need-sync" sync-in-progress=" sync-in-progress
				" should-sync="should-sync" start-time="start-time" mt-mod-time="mt-mod-time" recently-synced="recently-synced" will-sync="will-sync
				" sync-done=" sync-done " sync-period=" sync-period)
              (if (and (> sync-period 5)
                       (common:low-noise-print 30 "sync-period"))
                  (debug:print-info 0 *default-log-port* "Increased sync period due to long sync times, sync took: " sync-period " seconds."))
	      ;; (if recently-synced (debug:print-info 0 *default-log-port* "Skipping sync due to recently-synced flag=" recently-synced))
	      ;; (debug:print-info 0 *default-log-port* "need-sync: " need-sync " sync-in-progress: " sync-in-progress " should-sync: " should-sync " will-sync: " will-sync)
	      (if will-sync (set! *db-sync-in-progress* #t))
	      (mutex-unlock! *db-multi-sync-mutex*)
	      (if will-sync
                  (let (;; (max-sync-duration  (configf:lookup-number *configdat* "server" "max-sync-duration")) ;; KEEPING THIS AVAILABLE BUT SHOULD NOT USE, I'M PRETTY SURE IT DOES NOT WORK!
                        (sync-start         (current-milliseconds)))
		    (with-output-to-file start-file (lambda ()(print (current-process-id))))
		    
		    ;; put lock here
		    
                    ;; (if (or (not max-sync-duration)
                    ;;        (< sync-duration max-sync-duration)) ;; NOTE: db:sync-to-megatest.db keeps track of time of last sync and syncs incrementally
                        (let ((res        (db:sync-to-megatest.db dbstruct no-sync-db: no-sync-db))) ;; did we sync any data? If so need to set the db touched flag to keep the server alive
                          (set! sync-duration (- (current-milliseconds) sync-start))
                          (if (> res 0) ;; some records were transferred, keep the db alive
                              (begin
                                (mutex-lock! *heartbeat-mutex*)
                                (set! *db-last-access* (current-seconds))
                                (mutex-unlock! *heartbeat-mutex*)
                                (debug:print-info 0 *default-log-port* "sync called, " res " records transferred."))
                              (debug:print-info 2 *default-log-port* "sync called but zero records transferred")))))
;;                         ;; TODO: factor this next routine out into a function
;;                         (with-input-from-pipe ;; this should not block other threads but need to verify this
;;                          (conc "megatest -sync-to-megatest.db -m testsuite:" (common:get-area-name) ":" *toppath*)
;;                          (lambda ()
;;                            (let loop ((inl (read-line))
;;                                       (res #f))
;;                              (if (eof-object? inl)
;;                                  (begin
;;                                    (set! sync-duration (- (current-milliseconds) sync-start))
;;                                    (cond
;;                                     ((not res)
;;                                      (debug:print 0 *default-log-port* "ERROR: sync from /tmp db to megatest.db appears to have failed. Recommended that you stop your runs and run \"megatest -cleanup-db\""))
;;                                     ((> res 0)
;;                                      (mutex-lock! *heartbeat-mutex*)
;;                                      (set! *db-last-access* (current-seconds))
;;                                      (mutex-unlock! *heartbeat-mutex*))))
;;                                  (let ((num-synced (let ((matches (string-match "^Synced (\\d+).*$" inl)))
;;                                                      (if matches
;;                                                          (string->number (cadr matches))
;;                                                          #f))))
;;                                    (loop (read-line)
;;                                          (or num-synced res))))))))))
	      (if will-sync
		  (begin
		    (mutex-lock! *db-multi-sync-mutex*)
		    (set! *db-sync-in-progress* #f)
		    (set! *db-last-sync* start-time)
		    (with-output-to-file end-file (lambda ()(print (current-process-id))))

		    ;; release lock here

		    (mutex-unlock! *db-multi-sync-mutex*)))
	      (if (and debug-mode
		       (> (- start-time last-time) 60))
		  (begin
		    (set! last-time start-time)
		    (debug:print-info 4 *default-log-port* "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
	    
	    ;; keep going unless time to exit
	    ;;
	    (if (not *time-to-exit*)
		(let delay-loop ((count 0))
                  ;;(debug:print-info 13 *default-log-port* "delay-loop top; count="count" pid="(current-process-id)" this-wd-num="this-wd-num" *time-to-exit*="*time-to-exit*)
                                                            
		  (if (and (not *time-to-exit*)
			   (< count 6)) ;; was 11, changing to 4. 
		      (begin
			(thread-sleep! 1)
			(delay-loop (+ count 1))))
		  (if (not *time-to-exit*) (loop))))
	    ;; time to exit, close the no-sync db here
	    (db:no-sync-close-db no-sync-db)
	    (if (common:low-noise-print 30)
		(debug:print-info 0 *default-log-port* "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*" pid="(current-process-id) ))))))) ;;" this-wd-num="this-wd-num)))))))

#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

usage="mt_ezstep stepname command [args ...]"











# Purpose: This is for the [ezsteps] secton in your testconfig file.
#   DO NOT USE IN YOUR SCRIPTS!
#
# Call like this:
# mt_ezstep stepname prevstepname command ....
# 
if [[ "x$1" == "x" ]];then
  echo "Usage: $usage"
  exit
fi

# Since the user may not have . on the path and since we are likely to want to 
# run test scripts in the current directory add the current dir to the path
export PATH=$PATH:$PWD
testrundir=$1; shift
stepname=$1;shift


command=$*

allstatus=99
runstatus=99
logpropstatus=99

# prev_env=".ezsteps/${prevstepname}.sh"
# echo "prev_env=$prev_env"
# if [[ -e "${prev_env}" ]];then
#     source $prev_env
# fi

# source the environment from the previous step if it exists
cd $testrundir
#if [[ "$MT_CMDINFO" == "" ]];then
  if [[ -e megatest.sh ]];then
    source megatest.sh
  else
    echo "ERROR: $0 should be run within a megatest test environment"
    echo "Usage: $usage"
    exit
  fi
#fi



# if a logpro file exists then use it otherwise just run the command, nb// was using 2>&1
if [[ -e ${stepname}.logpro ]];then









   eval $command 2>&1 ${stepname}.log
   runstatus=$?
   logpro ${stepname}.logpro ${stepname}.html &> /dev/null < ${stepname}.log
   logprostatus=$?





   if [[ $runstatus == 0 ]]; then


       exitstatus=$logprostatus

   else

       exitstatus=$runstatus
   fi
else
   eval $command &> ${stepname}.log
   exitstatus=$?
fi


exit $exitstatus