Megatest

;; moved from dbfile
;;
;; ADD run-id SUPPORT
;;
(define (db:create-all-triggers dbstruct)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (db:create-triggers db))))

(define (db:create-triggers db)
    (for-each (lambda (key)
              (sqlite3:execute db (cadr key)))
          db:trigger-list))

(define (db:drop-all-triggers dbstruct)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (db:drop-triggers db))))

(define (db:have-incompletes? dbstruct run-id ovr-deadtime)
  (let* ((incompleted '())
	 (oldlaunched '())
	 (toplevels   '())

;; The "archived" field in tests is overloaded; 0 = not archived, > 0 archived in block with given id
;;
(define (db:test-set-archive-block-id dbstruct run-id test-id archive-block-id)
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET archived=? WHERE id=?;"
		      archive-block-id test-id))))
 
;; Look up the archive block info given a block-id
;;
(define (db:test-get-archive-block-info dbstruct archive-block-id)

         (server-overloaded-budget 200)
         (launch-monitor-off-time (or (configf:lookup-number *configdat* "setup" "test-stats-update-period") 30))
         (launch-monitor-on-time-budget 30)
         (launch-monitor-period (+ launch-monitor-off-time launch-monitor-on-time-budget server-overloaded-budget))
         (remotehoststart-deadtime-default (+ server-start-allowance server-overloaded-budget 30))
         (remotehoststart-deadtime (or deadtime-trim remotehoststart-deadtime-default))
         (running-deadtime-default (+ server-start-allowance (* 2 launch-monitor-period)))
         (running-deadtime (or deadtime-trim running-deadtime-default))) ;; two minutes (30 seconds between updates, this leaves 3x grace period)

    (debug:print-info 4  *default-log-port* "running-deadtime = " running-deadtime)
    (debug:print-info 4  *default-log-port* "deadtime-trim = " deadtime-trim)








































    (let* ((dat (db:get-toplevels-and-incompletes dbstruct run-id running-deadtime remotehoststart-deadtime)))
      (set! oldlaunched (list-ref dat 1))






      (set! toplevels   (list-ref dat 2))





      (set! incompleted (list-ref dat 0)))



















    (debug:print-info 18 *default-log-port* "Found " (length oldlaunched) " old LAUNCHED items, "
		      (length toplevels) " old LAUNCHED toplevel tests and "
		      (length incompleted) " tests marked RUNNING but apparently dead.")
  
    ;; These are defunct tests, do not do all the overhead of set-state-status. Force them to INCOMPLETE.
    ;;
    ;; (db:delay-if-busy dbdat)
    (let* ((min-incompleted-ids (map car incompleted)) ;; do 'em all
	   (all-ids             (append min-incompleted-ids (map car oldlaunched))))
      (if (> (length all-ids) 0)
	  (begin
	    ;; (launch:is-test-alive "localhost" 435)
	    (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ")
			 " as DEAD")
	    (for-each
             (lambda (test-id)

               (let* ((tinfo   (db:get-test-info-by-id dbstruct run-id test-id))
		      (run-dir (db:test-get-rundir     tinfo))
		      (host    (db:test-get-host       tinfo))
		      (pid     (db:test-get-process_id tinfo))
		      (result (db:get-status-from-final-status-file run-dir)))
		 (if (and (list? result) (> (length result) 1) (equal? "PASS" (cadr result)) (equal? "COMPLETED" (car result))) 
		     (begin
		       (debug:print 0 *default-log-port* "INFO: test " test-id " actually passed, so marking PASS not DEAD")
		       (db:set-state-status-and-roll-up-items
			dbstruct run-id test-id 'foo "COMPLETED" "PASS"
			"Test stopped responding but it has PASSED; marking it PASS in the DB."))
		     (let ((is-alive (and (not (eq? pid 0))  ;; 0 is default in re-used field "attemptnum" where pid stored.
					  (launch:is-test-alive host pid))))
		       (if is-alive
			   (debug:print 0 *default-log-port* "INFO: test " test-id " on host " host
					" has a process on pid " pid ", NOT setting to DEAD.")
			   (begin
			     (debug:print 0 *default-log-port* "INFO: test " test-id
					  " final state/status is not COMPLETED/PASS. It is " result)
			     (db:set-state-status-and-roll-up-items
			      dbstruct run-id test-id 'foo "COMPLETED" "DEAD"
			      "Test stopped responding while in RUNNING or REMOTEHOSTSTART; presumed dead.")))))))
	     ;; call end of eud of run detection for posthook - from merge, is it needed?
	     ;; (launch:end-of-run-check run-id)
	     all-ids)
	    ;;call end of eud of run detection for posthook
	    (launch:end-of-run-check run-id)
	    )))))

;; BUG: Probably broken - does not explicitly use run-id in the query
;;
(define (db:top-test-set-per-pf-counts dbstruct run-id test-name)
  (db:general-call dbstruct run-id 'top-test-set-per-pf-counts (list test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name test-name)))

;; Clean out old junk and vacuum the database

	 (qryvals   (append (list runname) (map cadr keyvals)))
	 (key=?str  (string-intersperse (map (lambda (k)(conc k "=?")) keys) " AND ")))
    ;; (debug:print 0 *default-log-port* "Got here 0.")
    (debug:print 3 *default-log-port* "keys: " keys " allvals: " allvals " keyvals: " keyvals " key=?str is " key=?str)
    (debug:print 2 *default-log-port* "NOTE: using target " (string-intersperse (map cadr keyvals) "/") " for this run")
    (if (and runname (null? (filter (lambda (x)(not x)) keyvals))) ;; there must be a better way to "apply and"
	(db:with-db
	 dbstruct #f #t
	 (lambda (dbdat db)
	   ;; (debug:print 0 *default-log-port* "Got here 1.")
	   (let ((res #f))
	     (apply sqlite3:execute db
		    (conc "INSERT OR IGNORE INTO runs (runname,state,status,owner,event_time,contour"
			  comma keystr ") VALUES (?,?,?,?,strftime('%s','now'),?" comma valslots ");")
		    allvals)

			  db qrystr runname)
			 res))))
      (if (null? runs)
	  (db:create-initial-run-record dbstruct runname target))
      (let* ((run-id (db:get-run-id dbstruct runname target)))
	(db:with-db
	 dbstruct
	 #f #t
	 (lambda (dbdat db)
	   (for-each
	    (lambda (keyval)
	      (let* ((fieldname (car keyval))
		     (getqry    (conc "SELECT "fieldname" FROM runs WHERE id=?;"))
		     (setqry    (conc "UPDATE runs SET "fieldname"=? WHERE id=?;"))
		     (val       (cdr keyval))

(define (db:create-initial-run-record dbstruct runname target)	  
  (let* ((keys     (db:get-keys dbstruct))
     	 (targvals (string-split target "/"))
	 (keystr   (string-intersperse keys ","))
	 (key?str  (string-intersperse (make-list (length targvals) "?") ","))
	 (qrystr   (conc "INSERT INTO runs (runname,"keystr") VALUES (?,"key?str")")))
    (db:with-db
     dbstruct #f #t
     (lambda (dbdat db)
       (apply sqlite3:execute db qrystr runname targvals)))))

(define (db:insert-test dbstruct run-id test-rec)
  (let* ((testname  (alist-ref "testname" test-rec equal?))
	 (item-path (alist-ref "item_path" test-rec equal?))
	 (id        (db:get-test-id dbstruct run-id testname item-path))
	 (fieldvals (filter (lambda (x)(not (member (car x) '("id" "last_update")))) test-rec))
	 (setqry    (conc "UPDATE tests SET "(string-intersperse
					      (map (lambda (dat)
						     (conc (car dat)"=?"))
						   fieldvals)
					      ",")" WHERE id=?;"))
	 (insqry   (conc "INSERT INTO tests ("(string-intersperse (map (lambda (x) (car x)) fieldvals) ",")
			 ") VALUES ("(string-intersperse (make-list (length fieldvals) "?") ",")");")))
    (debug:print 0 *default-log-port* "id: "id"\nset: "setqry"\ninsqry: "insqry)
    (db:with-db
     dbstruct
     run-id #t
     (lambda (dbdat db)
       (if id
	   (apply sqlite3:execute db setqry (append (map cdr fieldvals) (list id)))
	   (apply sqlite3:execute db insqry (map cdr fieldvals)))))))

;; replace header and keystr with a call to runs:get-std-run-fields
;;

;; input data is a list (state status count)
;;
(define (db:update-run-stats dbstruct run-id stats)
  ;; (mutex-lock! *db-transaction-mutex*)
  (db:with-db
   dbstruct
   #f
   #t

   (lambda (dbdat db)
     ;; remove previous data
     
     (let* ((stmt1 (sqlite3:prepare db "DELETE FROM run_stats WHERE run_id=? AND state=? AND status=?;"))
	    (stmt2 (sqlite3:prepare db "INSERT INTO run_stats (run_id,state,status,count) VALUES (?,?,?,?);"))
	    (res
	     (sqlite3:with-transaction

   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE runs SET comment=? WHERE id=?;" comment ;; (sdb:qry 'getid comment)
		      run-id))))

;; does not (obviously!) removed dependent data. But why not!!?
(define (db:delete-run dbstruct run-id)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (sqlite3:with-transaction
      db
      (lambda ()
        (sqlite3:execute db "DELETE FROM test_steps WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);" run-id)
        (sqlite3:execute db "DELETE FROM test_data WHERE test_id IN (SELECT id FROM tests WHERE run_id=?);"  run-id)
        (sqlite3:execute db "UPDATE tests SET state='DELETED',comment='' WHERE run_id=?;" run-id)

       (sqlite3:execute db "UPDATE runs SET state=? WHERE id=?;" newlockval run-id)
       (sqlite3:execute db "INSERT INTO access_log (user,accessed,args) VALUES(?,strftime('%s','now'),?);"
			user (conc newlockval " " run-id))
       (debug:print-info 1 *default-log-port* "" newlockval " run number " run-id)))))

(define (db:set-run-status dbstruct run-id status msg)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
       (if msg
         (sqlite3:execute db "UPDATE runs SET status=?,comment=? WHERE id=?;" status msg run-id)
         (sqlite3:execute db "UPDATE runs SET status=? WHERE id=?;" status run-id)))))

(define (db:set-run-state-status-db dbdat db run-id state status )
  (sqlite3:execute
   (db:get-cache-stmth
    dbdat db "UPDATE runs SET status=?,state=? WHERE id=?;") status state run-id))

(define (db:set-run-state-status dbstruct run-id state status )
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (db:set-run-state-status-db dbdat db run-id state status))))
     
(define (db:get-run-status dbstruct run-id)
  (let ((res "n/a"))
    (db:with-db
     dbstruct #f #f

;; Convert calling routines to get list of run-ids and loop, do not use the get-tests-for-runs
;;

(define (db:delete-test-records dbstruct run-id test-id)
  (db:general-call dbstruct run-id 'delete-test-step-records (list test-id))
  (db:general-call dbstruct run-id 'delete-test-data-records (list test-id))
  (db:with-db
   dbstruct run-id #t
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET state='DELETED',status='n/a',comment='' WHERE id=?;" test-id))))

;; 
(define (db:delete-old-deleted-test-records dbstruct)
  (let ((targtime (- (current-seconds)
		     (or (configf:lookup-number *configdat* "setup" "keep-deleted-records")

;; ;; NB// Ultimately this will be deprecated in deference to mt:test-set-state-status-by-id
;;
;;      NOTE: run-id is not used
;; ;;
(define (db:test-set-state-status dbstruct run-id test-id newstate newstatus newcomment)
  (db:with-db
   dbstruct
   run-id #t
   (lambda (dbdat db)
     (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment))))

(define (db:test-set-state-status-db db run-id test-id newstate newstatus newcomment)
  (cond
   ((and newstate newstatus newcomment)
    (sqlite3:execute db "UPDATE tests SET state=?,status=?,comment=? WHERE id=?;" newstate newstatus newcomment ;; (sdb:qry 'getid newcomment)

;; overload the unused attemptnum field for the process id of the runscript or 
;; ezsteps step script in progress
;;
(define (db:test-set-top-process-pid dbstruct run-id test-id pid)
  (db:with-db
   dbstruct
   run-id
   #t
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET attemptnum=? WHERE id=?;"
		      pid test-id))))

(define (db:test-get-top-process-pid dbstruct run-id test-id)
  (db:with-db
   dbstruct

		#f
		(loop (car tal)(cdr tal)(+ indx 1)))))))

(define db:test-record-qry-selector (string-intersperse db:test-record-fields ","))

(define (db:update-tesdata-on-repilcate-db dbstruct old-lt new-lt)
  (db:with-db
   dbstruct   #f   #t
   (lambda (dbdat db)
     (sqlite3:execute db "UPDATE tests SET rundir= replace(rundir,?,?), shortdir=replace(shortdir,?,?);"
		      old-lt new-lt  old-lt new-lt))))

;; NOTE: Use db:test-get* to access records
;; NOTE: This needs rundir decoding? Decide, decode here or where used? For the moment decode where used.
(define (db:get-all-tests-info-by-run-id dbstruct run-id)

;; look at the test_data status field, 
;;    if all are pass (any case) and the test status is PASS or NULL or '' then set test status to PASS.
;;    if one or more are fail (any case) then set test status to PASS, non "pass" or "fail" are ignored
(define (db:test-data-rollup dbstruct run-id test-id status)
  (let* ((fail-count 0)
	 (pass-count 0))
    (db:with-db
     dbstruct run-id #t
     (lambda (dbdat db)
       (sqlite3:for-each-row
	(lambda (fcount pcount)
	  (set! fail-count fcount)
	  (set! pass-count pcount))
	db 
	"SELECT (SELECT count(id) FROM test_data WHERE test_id=? AND status like 'fail') AS fail_count,

;; foo,bra,   1.2, pass, silly stuff
;; faz,bar,    10,  8mA,     ,     ,"this is a comment"
;; EOF

(define (db:csv->test-data dbstruct run-id test-id csvdata)
  (debug:print 4 *default-log-port* "test-id " test-id ", csvdata: " csvdata)
  (db:with-db
   dbstruct #f #t
   (lambda (dbdat db)
     (let* ((csvlist (csv->list (make-csv-reader
				 (open-input-string csvdata)
				 '((strip-leading-whitespace? #t)
				   (strip-trailing-whitespace? #t)))))) ;; (csv->list csvdata)))
       (for-each
	(lambda (csvrow)

			   #f))
	 (new-state-eh #f)
	 (new-status-eh #f))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART")) 
	(db:general-call dbstruct run-id 'set-test-start-time (list test-id)))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct run-id #t
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                 ;; NB// Pass the db so it is part fo the transaction
                 (db:test-set-state-status-db db run-id test-id state status comment) ;; this call sets the item state/status

	
	;; NB// Pass the db so it is part of the transaction
	(list newstate newstatus))))

(define (db:set-state-status-and-roll-up-run dbstruct run-id curr-state curr-status)
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct run-id #t
     (lambda (dbdat db)
       (let ((tr-res
              (sqlite3:with-transaction
               db
               (lambda ()
                   (let* ((state-status-counts (db:get-all-state-status-counts-for-run-db dbdat db run-id))
			  (state-statuses      (db:roll-up-rules state-status-counts #f #f ))

   ((not (equal? megatest-version calling-version))
    (list #t (conc "Login warning due to mismatch megatest version: " calling-version ", " megatest-version)))
   
    (else
    (hash-table-set! *logged-in-clients* client-signature (current-seconds))
    '(#t "successful login"))))

;; NO WAY TO KNOW IF IT MODIFIES THE DB BUT NEARLY ALL ARE UPDATES/INSERTS
;;
(define (db:general-call dbstruct run-id stmtname params)
  ;; Why is db:lookup-query above not used here to get the query?
  (let ((query (let ((q (alist-ref (if (string? stmtname)
				       (string->symbol stmtname)
				       stmtname)
				   db:queries)))
 		 (if q (car q) #f))))
    (db:with-db
     dbstruct run-id #t
     (lambda (dbdat db)
       (apply sqlite3:execute db query params)
       #t))))

;; get a summary of state and status counts to calculate a rollup
;;
(define (db:get-state-status-summary dbstruct run-id testname)

	db
	"SELECT id,testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags,jobgroup FROM test_meta WHERE testname=?;"
	testname)
       res))))

;; create a new record for a given testname
(define (db:testmeta-add-record dbstruct testname)
  (db:with-db dbstruct #f #t
	      (lambda (dbdat db)
		(sqlite3:execute 
		 db
		 "INSERT OR IGNORE INTO test_meta (testname,author,owner,description,reviewed,iterated,avg_runtime,avg_disk,tags) VALUES (?,'','','','','','','','');" testname))))

;; update one of the testmeta fields
(define (db:testmeta-update-field dbstruct testname field value)
  (db:with-db dbstruct #f #t
	      (lambda (dbdat db)
		(sqlite3:execute 
		 db
		 (conc "UPDATE test_meta SET " field "=? WHERE testname=?;") value testname))))

(define (db:testmeta-get-all dbstruct)
  (db:with-db dbstruct #f #f 

;;
(define dbfile:testsuite-name (make-parameter #f))

(define keep-age-param        (make-parameter 10))      ;; qif file age, if over move to attic
(define num-run-dbs           (make-parameter 10))      ;; number of db's in .mtdb
(define dbfile:sync-method    (make-parameter 'attach)) ;; 'attach or 'original
(define dbfile:cache-method   (make-parameter 'inmem))  ;; 'direct
(define dbcache-mode (make-parameter 'tmp)) ;; 'inmem, 'tmp (changes what open inmem routine does)


;; 'original     - use old condition code
;; 'suicide-mode - create mtrah/stop-the-train with info on what went wrong
;; else use no condition code (should be production mode)
;;
(define no-condition-db-with-db (make-parameter 'suicide-mode))

	  (hash-table-set! *dbmod:nfs-db-handles* dbfname newdbstruct)
	  newdbstruct))))

;;======================================================================
;; The inmem one-db file per server method goes in here
;;======================================================================

;; NOTE: the r/w is now w/r, #t=db modified by query, #f=db NOT modified by query
(define (dbmod:with-db dbstruct run-id w/r proc params)
  (let* ((use-mutex (or (and w/r ;; use the mutex on queries that modify the db and for sync to disk
			     (> *api-process-request-count* 5)) ;; when writes are happening throttle more
			(> *api-process-request-count* 50)))
	 (dbdat     (dbmod:open-db dbstruct run-id (dbfile:db-init-proc)))
	 (dbh       (dbr:dbdat-dbh dbdat)) ;; this will be the inmem handle
	 (dbfile    (dbr:dbdat-dbfile dbdat)))
    ;; if nfs mode do a sync if delta > 2
    (let* ((last-update (dbr:dbstruct-last-update dbstruct))
	   (sync-proc   (dbr:dbstruct-sync-proc dbstruct))
	   (curr-secs   (current-seconds)))
      (if (> (- curr-secs last-update) 3)
	  (begin
	    (sync-proc last-update)

	    ;; MOVE THIS CALL TO INSIDE THE sync-proc CALL
	    (dbr:dbstruct-last-update-set! dbstruct curr-secs)

	    )))
    (if use-mutex (mutex-lock! *db-with-db-mutex*))
    (let* ((res (apply proc dbdat dbh params)))
      (if use-mutex (mutex-unlock! *db-with-db-mutex*))
      res)))

(define (db:with-db dbstruct run-id w/r proc . params)
  (dbmod:with-db dbstruct run-id w/r proc params))

(define (dbmod:open-inmem-db init-proc #!optional (dbfullname #f))
  (let* ((db      (if dbfullname
		      (dbmod:safely-open-db dbfullname init-proc #t)
		      (sqlite3:open-database ":memory:")))
	 (handler (sqlite3:make-busy-timeout 3600)))
    (sqlite3:set-busy-handler! db handler)

			    (syncdir 'todisk))
  (let* ((dbstruct     (or dbstruct-in (make-dbr:dbstruct areapath: areapath)))
	 (dbfname      (or dbfname-in (dbmod:run-id->dbfname run-id)))
	 (dbpath       (dbmod:get-dbdir dbstruct))             ;; directory where all the .db files are kept
	 (dbfullname   (conc dbpath"/"dbfname)) ;; (dbmod:run-id->full-dbfname dbstruct run-id))
	 (dbexists     (file-exists? dbfullname))
	 (tmpdir       (conc "/tmp/"(current-user-name)))
	 (tmpdb        (let* ((fname (conc tmpdir"/" (string-translate areapath "/" ".")"-"(current-process-id)"-"dbfname)))
			 (if (not (file-exists? tmpdir))(create-directory tmpdir))
			 ;; check if tmpdb already exists, either delete it or
			 ;; add something to the name
			 fname))
	 (inmem        (dbmod:open-inmem-db init-proc
					    (if (eq? (dbcache-mode) 'inmem)
						#f

    (dbr:dbstruct-inmem-set!     dbstruct inmem)
    (dbr:dbstruct-ondiskdb-set!  dbstruct db)
    (dbr:dbstruct-dbfile-set!    dbstruct dbfullname)
    (dbr:dbstruct-dbfname-set!   dbstruct dbfname)
    (dbr:dbstruct-sync-proc-set! dbstruct
				 (lambda (last-update)
				   (if *sync-in-progress*
				       (debug:print 3 *default-log-port* "WARNING: overlapping calls to sync to disk")
				       (begin
					 (mutex-lock! *db-with-db-mutex*) ;; this mutex is used when overloaded or during a query that modifies the db
					 (set! *sync-in-progress* #t)
					 (dbmod:sync-gasket tables last-update inmem db
							    dbfullname syncdir)
					 (mutex-unlock! *db-with-db-mutex*)
					 (thread-sleep! 0.5) ;; ensure at least 1/2 second down time between sync calls
					 (set! *sync-in-progress* #f)))))
    ;; (dbmod:sync-tables tables #f db inmem)
    ;; (if db
    (dbmod:sync-gasket tables #f inmem db dbfullname 'fromdest) ;; ) ;; load into inmem
    (dbr:dbstruct-last-update-set! dbstruct (current-seconds)) ;; should this be offset back in time by one second?
    dbstruct))

		(sqlite3:execute  (db:get-cache-stmth dbdat db "UPDATE metadat SET val=val+? WHERE var=?;") val var))))

(define (db:del-var dbstruct var)
  (db:with-db dbstruct #f #t 
	      (lambda (dbdat db)
		(sqlite3:execute  (db:get-cache-stmth dbdat db "DELETE FROM metadat WHERE var=?;") var))))

(define (db:get-toplevels-and-incompletes dbstruct run-id running-deadtime remotehoststart-deadtime)
  (let* ((toplevels   '())
	 (oldlaunched '())
	 (incompleted '()))
    (db:with-db 
     dbstruct run-id #f
     (lambda (dbdat db)
       (let* ((stmth1 (db:get-cache-stmth
		       dbdat db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('RUNNING');"))
	      (stmth2 (db:get-cache-stmth
		       dbdat db
		       "SELECT id,rundir,uname,testname,item_path,event_time,run_duration FROM tests 
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > (run_duration + ?)
                                          AND state IN ('REMOTEHOSTSTART');"))
	      (stmth3 (db:get-cache-stmth
		       dbdat db
		       "SELECT id,rundir,uname,testname,item_path FROM tests
                           WHERE run_id=? AND (strftime('%s','now') - event_time) > 86400
                                          AND state IN ('LAUNCHED');")))
	 ;; in RUNNING or REMOTEHOSTSTART for more than 10 minutes
	 ;;
	 ;; HOWEVER: this code in run:test seems to work fine
	 ;;              (> (- (current-seconds)(+ (db:test-get-event_time testdat)
	 ;;                     (db:test-get-run_duration testdat)))
	 ;;                    600) 
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(begin
		  (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		  (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		(begin
		  (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted))
		  (debug:print-info 0 *default-log-port* "Found old test in RUNNING state, test-id="
				    test-id" exceeded running-deadtime "running-deadtime" now="(current-seconds)
				    " event-time="event-time" run-duration="run-duration))))
	  stmth1
	  run-id running-deadtime) ;; default time 720 seconds
	 
	 (sqlite3:for-each-row 
	  (lambda (test-id run-dir uname testname item-path event-time run-duration)
	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(begin
		  (set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		  (debug:print-info 0 *default-log-port* "Found old toplevel test in RUNNING state, test-id=" test-id))
		(begin
		  (debug:print-info 0 *default-log-port* "Found old test in REMOTEHOSTSTART state, test-id=" test-id
				    " exceeded running-deadtime "running-deadtime" now="(current-seconds)" event-time="event-time
				    " run-duration="run-duration)
		  (set! incompleted (cons (list test-id run-dir uname testname item-path run-id) incompleted)))))
	  stmth2
	  run-id remotehoststart-deadtime) ;; default time 230 seconds
	 
	 ;; in LAUNCHED for more than one day. Could be long due to job queues TODO/BUG: Need override for this in config
	 (sqlite3:for-each-row
	  (lambda (test-id run-dir uname testname item-path)
	    (if (and (equal? uname "n/a")
		     (equal? item-path "")) ;; this is a toplevel test
		;; what to do with toplevel? call rollup?
		(set! toplevels   (cons (list test-id run-dir uname testname item-path run-id) toplevels))
		(begin
		  (debug:print-info 0 *default-log-port* "Found old test in LAUNCHED state, test-id=" test-id
				    " 1 day since event_time marked")
                  (set! oldlaunched (cons (list test-id run-dir uname testname item-path run-id) oldlaunched)))))
	  stmth3
	  run-id))))
    (list incompleted oldlaunched toplevels)))

)