Megatest

    start-server
    kill-server

    ;; TESTS
    test-set-state-status-by-id
    delete-test-records
    delete-old-deleted-test-records
    test-set-status-state
    test-set-top-process-pid
    roll-up-pass-fail-counts
    update-pass-fail-counts
    top-test-set-per-pf-counts ;; (db:top-test-set-per-pf-counts (db:get-db *db* 5) 5 "runfirst")

    ;; RUNS
    register-run

	    ((start-server)                    (apply server:kind-run params))
	    ((kill-server)                     (set! *server-run* #f))

	    ;; TESTS
	    ((test-set-state-status-by-id)     (apply db:test-set-state-status-by-id dbstruct params))
	    ((delete-test-records)             (apply db:delete-test-records dbstruct params))
	    ((delete-old-deleted-test-records) (apply db:delete-old-deleted-test-records dbstruct params))
	    ((test-set-status-state)           (apply db:test-set-status-state dbstruct params))
	    ((test-set-top-process-pid)        (apply db:test-set-top-process-pid dbstruct params))
	    ((roll-up-pass-fail-counts)        (apply db:roll-up-pass-fail-counts dbstruct params))
	    ;; ((update-pass-fail-counts)         (apply db:general-call dbstruct 'update-pass-fail-counts params))
	    ((top-test-set-per-pf-counts)      (apply db:top-test-set-per-pf-counts dbstruct params))
	    ((test-set-archive-block-id)       (apply db:test-set-archive-block-id dbstruct params))

	    ;; RUNS

	   (min-incompleted-ids (map car incompleted)) ;; do 'em all
	   (all-ids             (append min-incompleted-ids (map car oldlaunched))))
      (if (> (length all-ids) 0)
	  (begin
	    (debug:print 0 *default-log-port* "WARNING: Marking test(s); " (string-intersperse (map conc all-ids) ", ") " as INCOMPLETE")
            (for-each
             (lambda (test-id)
               (db:test-set-status-state dbstruct run-id test-id "COMPLETE" "DEAD" "Test failed to complete"))
             all-ids))))))

;; ALL REPLACED BY THE BLOCK ABOVE
;;
;; 	    (sqlite3:execute 
;; 	     db
;; 	     (conc "UPDATE tests SET state='INCOMPLETE' WHERE run_id=? AND id IN (" 

	   (debug:print-error 0 *default-log-port* "reception failed. Received \"" msg "\" but cannot translate it.")
           (print-call-chain (current-error-port))
	   msg))) ;; crude reply for when things go awry
    ((zmq nmsg)(with-input-from-string msg (lambda ()(deserialize))))
    (else msg))) ;; rpc

;; This is to be the big daddy call

(define (db:test-set-status-state dbstruct run-id test-id status state msg)
  (let ((dbdat  (db:get-db dbstruct run-id)))
    (if (member state '("LAUNCHED" "REMOTEHOSTSTART"))
	(db:general-call dbdat 'set-test-start-time (list test-id)))
    ;; (if msg
    ;; 	(db:general-call dbdat 'state-status-msg (list state status msg test-id))
    ;; 	(db:general-call dbdat 'state-status     (list state status test-id)))
    (db:set-state-status-and-roll-up-items dbstruct run-id test-id #f state status msg)

	  (let ((sighand (lambda (signum)
			   ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
			   (if (eq? signum signal/stop)
			       (debug:print-error 0 *default-log-port* "attempt to STOP process. Exiting."))
			   (set! *time-to-exit* #t)
			   (print "Received signal " signum ", cleaning up before exit. Please wait...")
			   (let ((th1 (make-thread (lambda ()
						     (tests:test-force-state-status! run-id test-id "INCOMPLETE" "KILLED")
						     (print "Killed by signal " signum ". Exiting")
						     (thread-sleep! 1)
						     (exit 1))))
				 (th2 (make-thread (lambda ()
						     (thread-sleep! 2)
						     (debug:print 0 *default-log-port* "Done")
						     (exit 4)))))

	  ;;
	  (let* ((test-info (rmt:get-test-info-by-id run-id test-id))
		 (test-host (db:test-get-host        test-info))
		 (test-pid  (db:test-get-process_id  test-info)))
	    (cond
	     ((member (db:test-get-state test-info) '("INCOMPLETE" "KILLED" "UNKNOWN" "KILLREQ" "STUCK")) ;; prior run of this test didn't complete, go ahead and try to rerun
	      (debug:print 0 *default-log-port* "INFO: test is INCOMPLETE or KILLED, treat this execute call as a rerun request")
	      (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")) ;; prime it for running


	     ((member (db:test-get-state test-info) '("RUNNING" "REMOTEHOSTSTART"))
	      (if (process:alive-on-host? test-host test-pid)
		  (debug:print-error 0 *default-log-port* "test state is "  (db:test-get-state test-info) " and process " test-pid " is still running on host " test-host ", cannot proceed")
		  (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")))


	     ((not (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ")))
	      (tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a"))


	     (else ;; (member (db:test-get-state test-info) '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ"))
	      (debug:print-error 0 *default-log-port* "test state is " (db:test-get-state test-info) ", cannot proceed")
	      (exit))))
	  
	  (debug:print 2 *default-log-port* "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process

  (rmt:send-receive 'delete-test-records run-id (list run-id test-id)))

;; This is not needed as test steps are deleted on test delete call
;;
;; (define (rmt:delete-test-step-records run-id test-id)
;;   (rmt:send-receive 'delete-test-step-records run-id (list run-id test-id)))

(define (rmt:test-set-status-state run-id test-id status state msg)
  (rmt:send-receive 'test-set-status-state run-id (list run-id test-id status state msg)))

(define (rmt:test-toplevel-num-items run-id test-name)
  (rmt:send-receive 'test-toplevel-num-items run-id (list run-id test-name)))

;; (define (rmt:get-previous-test-run-record run-id test-name item-path)
;;   (rmt:send-receive 'get-previous-test-run-record run-id (list run-id test-name item-path)))

				    (if (null? tal)
					#t
					(loop (car tal)(cdr tal)))
				    #f))))))
	    (pop-directory)
	    result)))))

(define (tests:test-force-state-status! run-id test-id state status)
  (rmt:test-set-status-state run-id test-id status state #f))
  ;; (rmt:roll-up-pass-fail-counts run-id test-name item
  ;; (mt:process-triggers run-id test-id state status))

;; Do not rpc this one, do the underlying calls!!!
(define (tests:test-set-status! run-id test-id state status comment dat #!key (work-area #f))
  (let* ((real-status status)
	 (otherdat    (if dat dat (make-hash-table)))
	 (testdat     (rmt:get-test-info-by-id run-id test-id))
	 (test-name   (db:test-get-testname  testdat))
	 (item-path   (db:test-get-item-path testdat))

	(set! real-status "WAIVED"))

    (debug:print 4 *default-log-port* "real-status " real-status ", waived " waived ", status " status)

    ;; update the primary record IF state AND status are defined
    (if (and state status)
	(begin
	  (rmt:test-set-status-state run-id test-id real-status state (if waived waived comment))
	  ;; (mt:process-triggers run-id test-id state real-status) ;; triggers are called in test-set-status-state
	  ))
    
    ;; if status is "AUTO" then call rollup (note, this one modifies data in test
    ;; run area, it does remote calls under the hood.
    ;; (if (and test-id state status (equal? status "AUTO")) 
    ;; 	(rmt:test-data-rollup run-id test-id status))

	(let ((my-start-time (current-seconds))
	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(let ((script (configf:lookup *configdat* "testrollup" test-name)))
		  (print "Obtained lock for " outputfilename)
		  (rmt:roll-up-pass-fail-counts run-id test-name "" #f #f #f)
		  ;; (rmt:test-set-status-state run-id test-name #f #f #f) ;; (rmt:top-test-set-per-pf-counts run-id test-name)
		  (if script
		      (system (conc script " > " outputfilename " & "))
		      (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename))
		  (common:simple-file-release-lock lockf)
		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename))