Megatest

# BASH_MACHTYPE=$(shell bash -c "echo \$$MACHTYPE")
# ARCHSTR=$(BASH_MACHTYPE)_$(shell lsb_release -sr)
ARCHSTR=$(shell lsb_release -sr)
# ARCHSTR=$(shell bash -c "echo \$$MACHTYPE")

all : $(PREFIX)/bin/.$(ARCHSTR) mtest dboard 

mtest: $(OFILES) readline-fix.scm megatest.o
	csc $(CSCOPTS) $(OFILES) megatest.o -o mtest

dboard : $(OFILES) $(GOFILES) dashboard.scm
	csc $(OFILES) dashboard.scm $(GOFILES) -o dboard

odboard : olddashboard.scm $(OFILES) $(GOFILES)
	csc $(OFILES) $(GOFILES) olddashboard.scm -o odboard

	      (test-name         (db:test-get-testname  test-dat))
	      (test-id           (db:test-get-id        test-dat))
	      (run-id            (db:test-get-run_id    test-dat))
	      (target            (string-intersperse (map cadr (rmt:get-key-val-pairs run-id)) "/"))
	      
	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      (test-physical-path (if (file-exists? test-path) (read-symbolic-link test-path #t) #f))
	      (partial-path-index (if test-physical-path (substring-index test-partial-path test-physical-path) #f))
	      (test-base         (if (and partial-path-index 
					  test-physical-path )
				     (substring test-physical-path

	      (test-id           (db:test-get-id        test-dat))
	      (run-id            (db:test-get-run_id    test-dat))
	      (keyvals           (rmt:get-key-val-pairs run-id))
	      (target            (string-intersperse (map cadr keyvals) "/"))
	      
	      (toplevel/children (and (db:test-get-is-toplevel test-dat)
				      (> (rmt:test-toplevel-num-items run-id test-name) 0)))
	      (test-partial-path (conc target "/" run-name "/" (db:test-make-full-name test-name item-path)))
	      ;; note the trailing slash to get the dir inspite of it being a link
	      (test-path         (conc linktree "/" test-partial-path))
	      ;; if the old path was not deleted then prev-test-physical-path will end up pointing to a real directory
	      (prev-test-physical-path (if (file-exists? test-path) (read-symbolic-link test-path #t) #f))

	      (new-test-physical-path  (conc best-disk "/" test-partial-path))
	      (archive-block-id        (db:test-get-archived test-dat))

RUN=default.scm

all : batchsim
	./batchsim $(RUN)

batchsim : batchsim.scm
	csc batchsim.scm

   300 ;; start-y
   300 ;; delta-y how far to next queue
   15  ;; height
   400 ;; length
   ))
(define *use-log* #f)
(define *job-log-scale* 10)

;;======================================================================
;; CPU
;;======================================================================

(define-record cpu name num-cores mem job x y)

;;======================================================================
;; CPU Pool
;;======================================================================

(define-record pool name x y w h gap boxw cpus delta nrows ncols cpunum)

(define (new-pool name x y nrows ncols gap boxw)
  (let* ((delta (+ gap boxw))
	 ;; (nrows (quotient h (+ gap delta)))
	 ;; (ncols (quotient w (+ gap delta)))
	 (w     (+ gap (* nrows delta)))
	 (h     (+ gap (* ncols delta)))
	 (cpus  (make-vector (* nrows ncols) #f))
	 (npool (make-pool name x y w h gap boxw cpus delta nrows ncols 0)))
    npool))

(define (pool:add-cpu pool name num-cores mem)
  (let* ((cpu (make-cpu name num-cores mem #f #f #f)))
    (vector-set! (pool-cpus pool)(pool-cpunum pool) cpu)
    (pool-cpunum-set! pool (+ 1 (pool-cpunum pool)))
    cpu))

(define (pool:draw ezx pool)
  (let ((nrows (pool-nrows pool))
	(ncols (pool-ncols pool))
	(x     (pool-x     pool))
	(y     (pool-y     pool))
	(w     (pool-w     pool))
	(h     (pool-h     pool))
	(gap   (pool-gap   pool))
	(boxw  (pool-boxw  pool))
	(delta (pool-delta pool))
	(cpus  (pool-cpus  pool)))
    (ezx-select-layer ezx 1)
    ;(ezx-wipe-layer   ezx 1)
    ;; draw time at upper right
    (ezx-str-2d ezx x y (pool-name pool) *black*)
    (ezx-rect-2d ezx x y (+ x w)(+ y h) *black* 1)
    (let loop ((row    0)
	       (col    0)
	       (cpunum 0))
      (let* ((cpu  (vector-ref cpus cpunum))
	     (xval (+ x gap (* row delta)))
	     (yval (+ y gap (* col delta))))
	(if cpu
	    (begin
	      (cpu-x-set! cpu xval)
	      (cpu-y-set! cpu yval))
	    (vector-set! cpus cpunum (make-cpu (conc cpunum) 1 1 #f xval yval)))
	;; (print "box at " xval ", " yval)
	(ezx-rect-2d ezx xval yval (+ xval boxw) (+ yval boxw) *grey* 1)
	(if (< col (- ncols 1))
	    (loop row (+ col 1)(+ cpunum 1))
	    (if (< row (- nrows 1))
		(loop (+ row 1) 0 (+ cpunum 1))))))
    (ezx-redraw ezx)))
	       

;;======================================================================
;; Users
;;======================================================================

(define *user-colors* (make-hash-table))

;; run sim for four hours
;;
(define *end-time* (* 60 50))

;; create the cpus
;;
(let loop ((count 200))
  (add-cpu (conc "cpu_" count) 1 1)
  (if (>= count 0)(loop (- count 1))))

(draw-cpus)

(define *pool1* (new-pool "generic" 100 100 100 100 2 10))
(let loop ((count 10))
  (pool:add-cpu *pool1* (conc count) 1 1)
  (if (> count 0)
      (loop (- count 1))))

(pool:draw *ezx* *pool1*)

;; init the queues
;;
(hash-table-set! *queues* "normal" '())
(hash-table-set! *queues* "quick"  '())
(draw-queues)

;; run sim for four hours
;;
(define *end-time* (* 60 50))

;; create the cpus
;;
(let loop ((count 200))
  (add-cpu (conc "cpu_" count) 1 1)
  (if (>= count 0)(loop (- count 1))))

;; (draw-cpus)

(define *pool1* (new-pool "generic" 20 20 12 80 2 4))
(let loop ((count 10))
  (pool:add-cpu *pool1* (conc count) 1 1)
  (if (> count 0)
      (loop (- count 1))))

(pool:draw *ezx* *pool1*)

;; ;; init the queues
;; ;;
;; (hash-table-set! *queues* "normal" '())
;; (hash-table-set! *queues* "quick"  '())
;; (draw-queues)
;; 
;; ;; user k adds 200 jobs at time zero
;; ;;
;; (event *start-time*
;;        (lambda ()
;; 	 (let loop ((count 300)) ;; add 500 jobs
;; 	   (add-job "normal" "k" 600 1 1)
;; 	   (if (>= count 0)(loop (- count 1))))))
;; 
;; ;; one minute in user m runs ten jobs
;; ;;
;; (event (+ 600 *start-time*)
;;        (lambda ()
;; 	 (let loop ((count 300)) ;; add 100 jobs
;; 	   (add-job "normal" "m" 600 1 1)
;; 	   (if (> count 0)(loop (- count 1))))))
;; 
;; ;; every minute user j runs ten jobs
;; ;;
;; (define *user-j-jobs* 300)
;; (event (+ 600 *start-time*)
;;        (lambda ()
;; 	 (let f ()
;; 	   (schedule 60)
;; 	   (if (> *user-j-jobs* 0)
;; 	       (begin
;; 		 (let loop ((count 5)) ;; add 100 jobs
;; 		   (add-job "quick" "j" 600 1 1)
;; 		   (if (> count 0)(loop (- count 1))))
;; 		 (set! *user-j-jobs* (- *user-j-jobs* 5))))
;; 	   (if (and (not *done*)
;; 		    (> *user-j-jobs* 0))
;; 	       (f))))) ;; Megatest user running 200 jobs
;; 
;; ;; every minute user j runs ten jobs
;; ;;
;; (define *user-j-jobs* 300)
;; (event (+ 630 *start-time*)
;;        (lambda ()
;; 	 (let f ()
;; 	   (schedule 60)
;; 	   (if (> *user-j-jobs* 0)
;; 	       (begin
;; 		 (let loop ((count 5)) ;; add 100 jobs
;; 		   (add-job "quick" "n" 600 1 1)
;; 		   (if (> count 0)(loop (- count 1))))
;; 		 (set! *user-j-jobs* (- *user-j-jobs* 5))))
;; 	   (if (and (not *done*)
;; 		    (> *user-j-jobs* 0))
;; 	       (f))))) ;; Megatest user running 200 jobs
;; 
;; ;; ;;
;; ;; (event *start-time*
;; ;;        (lambda ()
;; ;; 	 (let f ((count 200))
;; ;; 	   (schedule 10)
;; ;; 	   (add-job "normal" "t" 60 1 1)
;; ;; 	   (if (and (not *done*)
;; ;; 		    (>= count 0))
;; ;; 	       (f (- count 1))))))
;; 
;; ;; every 3 seconds check for available machines and launch a job
;; ;;
;; (event *start-time*
;;        (lambda ()
;; 	 (let f ()
;; 	   (schedule 3)
;; 	   (let ((queue-names (random-sort (hash-table-keys *queues*))))
;; 	     (let loop ((cpu   (get-cpu))
;; 			(count (+ (length queue-names) 4))
;; 			(qname (car queue-names))
;; 			(remq  (cdr queue-names)))
;; 	       (if (and cpu
;; 			(> count 0))
;; 		   (begin
;; 		     (if (peek-job qname) ;; any jobs to do in normal queue
;; 			 (let ((job (take-job qname)))
;; 			   (run-job cpu job)))
;; 		     (loop (get-cpu)
;; 			   (- count 1)
;; 			   (if (null? remq)
;; 			       (car queue-names)
;; 			       (car remq))
;; 			   (if (null? remq)
;; 			       (cdr queue-names)
;; 			       (cdr remq)))))))
;; 	   (if (not *done*)(f)))))
;; 
;; ;; screen updates
;; ;;
(event *start-time* (lambda ()
		      (let f ()
			(schedule 60) ;; update the screen every 60 seconds of sim time
			;; (draw-cpus) ;; (print "Now: " *now* " queue: " (hash-table->alist *queues*))
			(pool:draw *ezx* *pool1*)

			(wait-for-next-draw-time)
			(if (not *done*) (f)))))
;; 
;; 
;; ;; end the simulation
;; ;;
(event *end-time*
       (lambda () 
	 (set! *event-list* '())
	 (set! *done* #t)))
;; 
(start)
;; ;; (exit 0)
;; 

(define (client:start run-id server-info)
  (http-transport:client-connect (tasks:hostinfo-get-interface server-info)
				 (tasks:hostinfo-get-port server-info)))

;; client:signal-handler
(define (client:signal-handler signum)
  (signal-mask! signum)
  (set! *time-to-exit* #t)
  (handle-exceptions
   exn
   (debug:print " ... exiting ...")
   (let ((th1 (make-thread (lambda ()
			     "") ;; do nothing for now (was flush out last call if applicable)
			   "eat response"))
	 (th2 (make-thread (lambda ()

       (pathname-file (megatest:area-path      area-dat))))

;;======================================================================
;; E X I T   H A N D L I N G
;;======================================================================

(define (std-exit-procedure area-dat)
  (set! *time-to-exit* #t)
  (rmt:print-db-stats area-dat)
  (let* ((configdat (megatest:area-configdat area-dat))
	 (run-ids (hash-table-keys *db-local-sync*)))
    (if (debug:debug-mode 18)
	(rmt:print-db-stats))
    (let ((th1 (make-thread (lambda () ;; thread for cleaning up, give it five seconds
			      (if (and (not (null? run-ids))
				       (configf:lookup configdat "setup" "megatest-db"))
				  (db:multi-db-sync run-ids 'new2old))
			      (if *dbstruct-db* (db:close-all *dbstruct-db* area-dat))
			      (if *inmemdb*     (db:close-all *inmemdb* area-dat))
			      (if (and *megatest-db*
				       (sqlite3:database? *megatest-db*))
				  (begin
				    (sqlite3:interrupt! *megatest-db*)
				    (sqlite3:finalize! *megatest-db* #t)
				    (set! *megatest-db* #f)))
			      (if *task-db*     (let ((db (cdr *task-db*)))
						  (if (sqlite3:database? db)
						      (begin
							(sqlite3:interrupt! db)
							(sqlite3:finalize! db #t)
							(vector-set! *task-db* 0 #f)))))) "Cleanup db exit thread"))
	  (th2 (make-thread (lambda ()
			      (debug:print 4 "Exiting with clean exit. Please be patient and wait a few seconds.")
			      (thread-sleep! 5) ;; give the clean up few seconds to do it's stuff
			      (debug:print 4 "       Done.")
			      (exit))
			    "exit timer")))
      (thread-start! th2)
      (thread-start! th1)
      (thread-join! th2))))
  
(define (std-signal-handler signum)
  ;; (signal-mask! signum)
  (debug:print 0 "ERROR: Received signal " signum " exiting promptly")
  ;; (std-exit-procedure) ;; shouldn't need this since we are exiting and it will be called anyway
  (exit))

(set-signal-handler! signal/int  std-signal-handler)  ;; ^C
(set-signal-handler! signal/term std-signal-handler)

;;======================================================================
;; Misc utils
;;======================================================================

;; Convert strings like "5s 2h 3m" => 60x60x2 + 3x60 + 5

(define configf:section-rx (regexp "^\\[(.*)\\]\\s*$"))
(define configf:blank-l-rx (regexp "^\\s*$"))
(define configf:key-sys-pr (regexp "^(\\S+)\\s+\\[system\\s+(\\S+.*)\\]\\s*$"))
(define configf:key-val-pr (regexp "^(\\S+)(\\s+(.*)|())$"))
(define configf:key-no-val (regexp "^(\\S+)(\\s*)$"))
(define configf:comment-rx (regexp "^\\s*#.*"))
(define configf:cont-ln-rx (regexp "^(\\s+)(\\S+.*)$"))
(define configf:settings   (regexp "^\\[configf:settings\\s+(\\S+)\\s+(\\S+)]\\s*$"))

;; read a line and process any #{ ... } constructs

(define configf:var-expand-regex (regexp "^(.*)#\\{(scheme|system|shell|getenv|get|runconfigs-get|rget)\\s+([^\\}\\{]*)\\}(.*)"))
(define (configf:process-line l ht allow-system)
  (let loop ((res l))
    (if (string? res)

    (if targ
	(or (configf:lookup config targ var)
	    (configf:lookup config "default" var))
	(configf:lookup config "default" var))))

;; this was inline but I'm pretty sure that is a hold over from when it was *very* simple ...
;;
(define (configf:read-line p ht allow-processing settings)
  (let loop ((inl (read-line p)))
    (let ((cont-line (and (string? inl)
			  (not (string-null? inl))
			  (equal? "\\" (string-take-right inl 1)))))
      (if cont-line ;; last character is \ 
	  (let ((nextl (read-line p)))
	    (if (not (eof-object? nextl))
		(loop (string-append (if cont-line 
					 (string-take inl (- (string-length inl) 1))
					 inl)
				     nextl))))
	  (let ((res (case allow-processing ;; if (and allow-processing 
		       ;;	   (not (eq? allow-processing 'return-string)))
		       ((#t #f)
			(configf:process-line inl ht allow-processing))
		       ((return-string)
			inl)
		       (else
			(configf:process-line inl ht allow-processing)))))
	    (if (and (string? res)
		     (not (equal? (hash-table-ref/default settings "trim-trailing-spaces" "no") "no")))
		(string-substitute "\\s+$" "" res)
		res))))))
      
;; read a config file, returns hash table of alists

;; read a config file, returns hash table of alists
;; adds to ht if given (must be #f otherwise)
;; envion-patt is a regex spec that identifies sections that will be eval'd
;; in the environment on the fly
;; sections: #f => get all, else list of sections to gather
(define (read-config path ht allow-system #!key (environ-patt #f)(curr-section #f)(sections #f)(settings (make-hash-table)))
  (debug:print-info 5 "read-config " path " allow-system " allow-system " environ-patt " environ-patt " curr-section: " curr-section " sections: " sections " pwd: " (current-directory))
  (debug:print 9 "START: " path)
  (if (not (file-exists? path))
      (begin 
	(debug:print-info 1 "read-config - file not found " path " current path: " (current-directory))
	;; WARNING: This is a risky change but really, we should not return an empty hash table if no file read?
	#f) ;; (if (not ht)(make-hash-table) ht))
      (let ((inp        (open-input-file path))
	    (res        (if (not ht)(make-hash-table) ht)))
	(let loop ((inl               (configf:read-line inp res allow-system settings)) ;; (read-line inp))
		   (curr-section-name (if curr-section curr-section "default"))
		   (var-flag #f);; turn on for key-var-pr and cont-ln-rx, turn off elsewhere
		   (lead     #f))
	  (debug:print-info 8 "curr-section-name: " curr-section-name " var-flag: " var-flag "\n   inl: \"" inl "\"")
	  (if (eof-object? inl) 
	      (begin
		(close-input-port inp)
		(hash-table-delete! res "") ;; we are using "" as a dumping ground and must remove it before returning the ht
		(debug:print 9 "END: " path)
		res)
	      (regex-case 
	       inl 
	       (configf:comment-rx _                  (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f))
	       (configf:blank-l-rx _                  (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f))
	       (configf:settings   ( x setting val  ) (begin
							(hash-table-set! settings setting val)
							(loop (configf:read-line inp res allow-system settings) curr-section-name #f #f)))
	       (configf:include-rx ( x include-file ) (let* ((curr-conf-dir (pathname-directory path))
							     (full-conf     (if (absolute-pathname? include-file)
										include-file
										(nice-path 
										 (conc (if curr-conf-dir
											   curr-conf-dir
											   ".")
										       "/" include-file)))))
							(if (file-exists? full-conf)
							    (begin
							      ;; (push-directory conf-dir)
							      (debug:print 9 "Including: " full-conf)
							      (read-config full-conf res allow-system environ-patt: environ-patt curr-section: curr-section-name sections: sections settings: settings)
							      ;; (pop-directory)
							      (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f))
							    (begin
							      (debug:print '(2 9) "INFO: include file " include-file " not found (called from " path ")")
							      (debug:print 2 "        " full-conf)
							      (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f)))))
	       (configf:section-rx ( x section-name ) (loop (configf:read-line inp res allow-system settings)
							    ;; if we have the sections list then force all settings into "" and delete it later?
							    (if (or (not sections) 
								    (member section-name sections))
								section-name "") ;; stick everything into ""
							    #f #f))
	       (configf:key-sys-pr ( x key cmd      ) (if allow-system
							  (let ((alist (hash-table-ref/default res curr-section-name '()))

							    (hash-table-set! res curr-section-name 
									     (config:assoc-safe-add alist
									   			    key 
												    (case allow-system
												      ((return-procs) val-proc)
												      ((return-string) cmd)
												      (else (val-proc)))))
							    (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f))
							  (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f)))
	       (configf:key-val-pr ( x key unk1 val unk2 ) (let* ((alist   (hash-table-ref/default res curr-section-name '()))
								  (envar   (and environ-patt (string-search (regexp environ-patt) curr-section-name)))
								  (realval (if envar
									       (config:eval-string-in-environment val)
									       val)))
							     (debug:print-info 6 "read-config env setting, envar: " envar " realval: " realval " val: " val " key: " key " curr-section-name: " curr-section-name)
							     (if envar (safe-setenv key realval))
							     (debug:print 10 "   setting: [" curr-section-name "] " key " = " val)
							     (hash-table-set! res curr-section-name 
									      (config:assoc-safe-add alist key realval))
							     (loop (configf:read-line inp res allow-system settings) curr-section-name key #f)))
	       (configf:key-no-val ( x key val)             (let* ((alist   (hash-table-ref/default res curr-section-name '())))
							      (debug:print 10 "   setting: [" curr-section-name "] " key " = #t")
							      (hash-table-set! res curr-section-name 
									       (config:assoc-safe-add alist key #t))
							      (loop (configf:read-line inp res allow-system settings) curr-section-name key #f)))
	       ;; if a continued line
	       (configf:cont-ln-rx ( x whsp val     ) (let ((alist (hash-table-ref/default res curr-section-name '())))
						(if var-flag             ;; if set to a string then we have a continued var
						    (let ((newval (conc 
								   (config-lookup res curr-section-name var-flag) "\n"
								   ;; trim lead from the incoming whsp to support some indenting.
								   (if lead
								       (string-substitute (regexp lead) "" whsp)
								       "")
								   val)))
						      ;; (print "val: " val "\nnewval: \"" newval "\"\nvarflag: " var-flag)
						      (hash-table-set! res curr-section-name 
								       (config:assoc-safe-add alist var-flag newval))
						      (loop (configf:read-line inp res allow-system settings) curr-section-name var-flag (if lead lead whsp)))
						    (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f))))
	       (else (debug:print 0 "ERROR: problem parsing " path ",\n   \"" inl "\"")
		     (set! var-flag #f)
		     (loop (configf:read-line inp res allow-system settings) curr-section-name #f #f))))))))
  
;; pathenvvar will set the named var to the path of the config
(define (find-and-read-config fname #!key (environ-patt #f)(given-toppath #f)(pathenvvar #f))
  (let* ((curr-dir   (current-directory))
         (configinfo (find-config fname toppath: given-toppath))
	 (toppath    (car configinfo))
	 (configfile (cadr configinfo)))

     (debug:print 0 " status:  " ((condition-property-accessor 'sqlite3 'status) exn))
     (debug:print 0 " src db:  " (db:dbdat-get-path fromdb))
     (for-each (lambda (dbdat)
		 (debug:print 0 " dbpath:  " (db:dbdat-get-path dbdat)))
	       (cons todb slave-dbs))
     (if *server-run* ;; we are inside a server, throw a sync-failed error
	 (signal (make-composite-condition
		 (make-property-condition 'sync-failed 'message "db:sync-tables failed in a server context.")))
	 0)) ;; return zero for num synced

	 ;; (set! *time-to-exit* #t) ;; let watch dog know that it is time to die.
	 ;; (tasks:server-set-state! (db:delay-if-busy tdbdat) server-id "shutting-down")
	 ;; (portlogger:open-run-close portlogger:set-port port "released")
	 ;; (exit 1)))
   (cond
    ((not fromdb) (debug:print 3 "WARNING: db:sync-tables called with fromdb missing") -1)

	     (db:dbdat-get-db fromdb)
	     full-sel)
	    
	    ;; tack on remaining records in fromdat
	    (if (not (null? fromdat))
		(set! fromdats (cons fromdat fromdats)))

	    (debug:print-info 4 "found " totrecords " records to sync")

	    ;; read the target table
	    (sqlite3:for-each-row
	     (lambda (a . b)
	       (hash-table-set! todat a (apply vector a b)))
	     (db:dbdat-get-db todb)
	     full-sel)

		     (set! res (vector test-id run-id testname state status -1 "" -1 -1 "" "-" item-path -1 "-" "-")))
		   db 
		   "SELECT run_id,testname,item_path,state,status FROM tests WHERE id=?;" 
		   test-id)))
    res))

;; get a useful subset of the tests data (used in dashboard
;; use db:mintest-get-{id ,run_id,testname ...}
;; 
(define (db:get-tests-for-runs-mindata dbstruct area-dat run-ids testpatt states statuses not-in)
  (debug:print 0 "ERROR: BROKN!")
  ;; (db:get-tests-for-runs dbstruct run-ids testpatt states statuses not-in: not-in qryvals: "id,run_id,testname,state,status,event_time,item_path"))
)

;; get a useful subset of the tests data (used in dashboard

	     #f
	     (lambda (db)
	       (sqlite3:first-result
		db
		(conc "SELECT count(id) FROM tests WHERE state in ('RUNNING','LAUNCHED','REMOTEHOSTSTART') AND testname in ('"
		      (string-intersperse testnames "','")
		      "') AND NOT (uname = 'n/a' AND item_path='');")) ;; should this include the (uname = 'n/a' ...) ???
	       )))))))
             ;; DEBUG FIXME - need to merge this v.155 query correctly   
             ;; AND testname in (SELECT testname FROM test_meta WHERE jobgroup=?)
             ;; AND NOT (uname = 'n/a' AND item_path = '');"

;; done with run when:
;;   0 tests in LAUNCHED, NOT_STARTED, REMOTEHOSTSTART, RUNNING
(define (db:estimated-tests-remaining dbstruct area-dat run-id)

sudo netstat -lptu
sudo netstat -tulpn</tt></pre>
</div></div>
</div>
</div>
</div>
<h1 id="_reference">Reference</h1>
<div class="sect1">
<h2 id="_config_file_settings">Config File Settings</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_trim_trailing_spaces">Trim trailing spaces</h3>
<div class="listingblock">
<div class="content">
<pre><code>[configf:settings trim-trailing-spaces yes]</code></pre>
</div></div>
</div>
</div>
</div>
<div class="sect1">
<h2 id="_the_testconfig_file">The testconfig File</h2>
<div class="sectionbody">
<div class="sect2">
<h3 id="_setup_section">Setup section</h3>
<div class="sect3">
<h4 id="_header">Header</h4>

</div>
</div>
</div>
<div id="footnotes"><hr /></div>
<div id="footer">
<div id="footer-text">
Version 1.0<br />
Last updated
 2015-03-30 19:19:55 MST
</div>
</div>
</body>
</html>

Reference
=========

Config File Settings
--------------------

Trim trailing spaces
~~~~~~~~~~~~~~~~~~~~

------------------
[configf:settings trim-trailing-spaces yes]
------------------

The testconfig File
-------------------

Setup section
~~~~~~~~~~~~~

(define (server:get-best-guess-address hostname)
  (let ((res #f))
    (for-each 
     (lambda (adr)
       (if (not (eq? (u8vector-ref adr 0) 127))
	   (set! res adr)))
     ;; NOTE: This can fail when there is no mention of the host in /etc/hosts. FIXME
     (vector->list (hostinfo-addresses (hostname->hostinfo hostname))))
    (string-intersperse 
     (map number->string
	  (u8vector->list
	   (if res res (hostname->ip hostname)))) ".")))

(define (http-transport:run hostn run-id server-id area-dat)

			     (loop count server-state (+ bad-sync-count 1)))))
	     ((exn)
	      (debug:print 0 "ERROR: error from sync code other than 'sync-failed. Attempting to gracefully shutdown the server")
	      (tasks:server-delete-record (db:delay-if-busy tdbdat area-dat) server-id " http-transport:keep-running crashed")
	      (exit)))
	    (set! sync-time  (- (current-milliseconds) start-time))
	    (set! rem-time (quotient (- 4000 sync-time) 1000))
	    (debug:print 4 "SYNC: time= " sync-time ", rem-time=" rem-time)
	    
	    (if (and (<= rem-time 4)
		     (> rem-time 0))
		(thread-sleep! rem-time)
		(thread-sleep! 4))) ;; fallback for if the math is changed ...

	  ;;

    ;; (set! script (conc "mt_ezstep " stepname " " (if prevstep prevstep "x") " " stepcmd))
    
    (debug:print 4 "script: " script)
    (rmt:teststep-set-status! run-id test-id stepname "start" "-" #f #f area-dat)
    ;; now launch the actual process
    (call-with-environment-variables 
     (list (cons "PATH" (conc (get-environment-variable "PATH") ":.")))
<<<<<<< BEGIN MERGE CONFLICT: local copy shown first <<<<<<<<<<<<<<<
     (lambda () ;; (process-run "/bin/bash" "-c" "exec ls -l /tmp/foobar > /tmp/delme-more.log 2>&1")
       (let* ((cmd (conc stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1 
	      (pid (process-run "/bin/bash" (list "-c" cmd))))
======= COMMON ANCESTOR content follows ============================
     (lambda ()
       (let* ((cmd (conc stepcmd " > " stepname ".log"))
	      (pid (process-run cmd)))
======= MERGED IN content follows ==================================
     (lambda () ;; (process-run "/bin/bash" "-c" "exec ls -l /tmp/foobar > /tmp/delme-more.log 2>&1")
       (let* ((cmd (conc "exec " stepcmd " > " stepname ".log 2>&1")) ;; >outfile 2>&1 
	      (pid (process-run "/bin/bash" (list "-c" cmd))))
>>>>>>> END MERGE CONFLICT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	 (rmt:test-set-top-process-pid run-id test-id pid area-dat)
	 (let processloop ((i 0))
	   (let-values (((pid-val exit-status exit-code)(process-wait pid #t)))
		       (mutex-lock! m)
		       (vector-set! exit-info 0 pid)
		       (vector-set! exit-info 1 exit-status)
		       (vector-set! exit-info 2 exit-code)

                                              runscript))))) ;; assume it is on the path
	       ;; (rollup-status 0)
	       )
	  (change-directory top-path)

	  ;; (set-signal-handler! signal/int (lambda ()
					    
	  ;; WAS: Do not run the test if it is REMOVING, RUNNING, KILLREQ or REMOTEHOSTSTART,
	  ;; NOW: Do not run test test unless state is LAUNCHED
	  ;; Mark the test as REMOTEHOSTSTART *IMMEDIATELY*
	  ;;
	  ;; This is flawed. It should be a single transaction that tests for NOT_STARTED and updates to REMOTEHOSTSTART
	  (let ((test-info (rmt:get-testinfo-state-status run-id test-id area-dat)))
	  ;;
	    (if (equal? (db:test-get-state test-info) "LAUNCHED") ;; '("REMOVING" "REMOTEHOSTSTART" "RUNNING" "KILLREQ")))
		(tests:test-force-state-status! run-id test-id "REMOTEHOSTSTART" "n/a")
		(begin
		  (debug:print 0 "ERROR: test state is " (db:test-get-state test-info) ", cannot proceed")
		  (exit))))
	  
	  (debug:print 2 "Exectuing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys area-dat))

				      (list 'env-ovrd  (hash-table-ref/default configdat "env-override" '())) 
				      (list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
				      (list 'runname   runname)
				      (list 'mt-bindir-path mt-bindir-path))))))))

    ;; clean out step records from previous run if they exist
    ;; (rmt:delete-test-step-records run-id test-id)
    
    ;; Moving launch logs to MT_RUN_AREA_HOME/logs 
    ;;
    (let ((launchdir (configf:lookup *configdat* "setup" "launchdir"))) ;; (change-directory work-area) ;; so that log files from the launch process don't clutter the test dir
      (if (not launchdir) ;; default
	  (change-directory (conc *toppath* "/logs")) ;; can assume this exists
	  (case (string->symbol launchdir)
	    ((legacy)(change-directory work-area))
	    (else    (change-directory launchdir)))))
    (cond
     ((and launcher hosts) ;; must be using ssh hostname
      (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms) debug-param)))
     ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
     (launcher
      (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms) debug-param)))
     ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))

	   (launch-results (apply (if launchwait
				      cmd-run-with-stderr->list
				      process-run)
				  (if useshell
				      (let ((cmdstr (string-intersperse fullcmd " ")))
					(if launchwait
					    cmdstr
					    (conc cmdstr " >> " work-area "/mt_launch.log 2>&1")))
				      (car fullcmd))
				  (if useshell
				      '()
				      (cdr fullcmd)))))
      (if (not launchwait) ;; give the OS a little time to allow the process to start
	  (thread-sleep! 0.01))
      (with-output-to-file (conc work-area "/mt_launch.log")
	(lambda ()
	  (if (list? launch-results)
	      (apply print launch-results)
	      (print "NOTE: launched \"" fullcmd "\"\n  but did not wait for it to proceed. Add the following to megatest.config \n[setup]\nlaunchwait yes\n  if you have problems with this"))
	  #:append))
      (debug:print 2 "Launching completed, updating db")
      (debug:print 2 "Launch results: " launch-results)

;; Always use two or four digit decimal
;; 1.01, 1.02...1.10,1.11,1,1101 ... 1.99,2.00..

(declare (unit megatest-version))

<<<<<<< BEGIN MERGE CONFLICT: local copy shown first <<<<<<<<<<<<<<<
(define megatest-version 1.6014)
======= COMMON ANCESTOR content follows ============================
(define megatest-version 1.6009)
======= MERGED IN content follows ==================================
(define megatest-version 1.6013)
>>>>>>> END MERGE CONFLICT >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  (make-thread 
   (lambda ()
     (thread-sleep! 0.05) ;; delay for startup
     ;; the query to get megatest-db setting might not work, forcing it to be default on. Use "no" to turn off
     (let ((legacy-sync (configf:lookup (megatest:area-configdat *area-dat*) "setup" "megatest-db"))
	   (debug-mode  (debug:debug-mode 1))
	   (last-time   (current-seconds)))
       (if (or (args:get-arg "-runtests")
	       (args:get-arg "-server")
	       (args:get-arg "-set-run-status")
	       (args:get-arg "-remove-runs")
	       (args:get-arg "-get-run-status")
	       )
	   (let loop ()
	     ;; sync for filesystem local db writes
	     ;;
	     (let ((start-time      (current-seconds))
		   (servers-started (make-hash-table)))
	       (for-each 
		(lambda (run-id)
		  (mutex-lock! *db-multi-sync-mutex*)
	      (if (and (not (equal? legacy-sync "no"))
			   (hash-table-ref/default *db-local-sync* run-id #f))
		      ;; (if (> (- start-time last-write) 5) ;; every five seconds
		      (begin ;; let ((sync-time (- (current-seconds) start-time)))
		    (db:multi-db-sync (list run-id) *area-dat* 'new2old)
			(if (common:low-noise-print 30 "sync new to old")
			    (let ((sync-time (- (current-seconds) start-time)))
			      (debug:print-info 0 "Sync of newdb to olddb for run-id " run-id " completed in " sync-time " seconds")))
			;; (if (> sync-time 10) ;; took more than ten seconds, start a server for this run
			;;     (begin
			;;       (debug:print-info 0 "Sync is taking a long time, start up a server to assist for run " run-id)
			;;       (server:kind-run run-id)))))
			(hash-table-delete! *db-local-sync* run-id)))
		  (mutex-unlock! *db-multi-sync-mutex*))
		(hash-table-keys *db-local-sync*))
	       (if (and debug-mode
			(> (- start-time last-time) 60))
		   (begin
		     (set! last-time start-time)
		     (debug:print-info 4 "timestamp -> " (seconds->time-string (current-seconds)) ", time since start -> " (seconds->hr-min-sec (- (current-seconds) *time-zero*))))))
	     
	     ;; keep going unless time to exit
	     ;;
	     (if (not *time-to-exit*)
		 (let delay-loop ((count 0))
		   (if (and (not *time-to-exit*)
			    (< count 11)) ;; aprox 5-6 seconds
		       (begin
			 (thread-sleep! 1)
			 (delay-loop (+ count 1))))
		   (loop)))
	     (debug:print-info 0 "Exiting watchdog timer, *time-to-exit* = " *time-to-exit*))))
     "Watchdog thread")))

(thread-start! *watchdog*)

(if (args:get-arg "-log")
    (let ((oup (open-output-file (args:get-arg "-log"))))
      (debug:print-info 0 "Sending log output to " (args:get-arg "-log"))
      (current-error-port oup)

	  (if newstatus  (rmt:general-call 'set-test-status  run-id newstatus  test-id))
	  (if newcomment (rmt:general-call 'set-test-comment run-id newcomment test-id))))
	(mt:process-triggers run-id test-id newstate newstatus)
	#t)))

(define (mt:test-set-state-status-by-testname run-id test-name item-path new-state new-status new-comment)
  (let ((test-id (rmt:get-test-id run-id test-name item-path)))
    (mt:test-set-state-status-by-id run-id test-id new-state new-status new-comment)))

(define (mt:lazy-read-test-config test-name area-dat)
  (let ((tconf (hash-table-ref/default *testconfigs* test-name #f))
	(configdat (megatest:area-configdat area-dat)))
    (if tconf
	tconf
	(let ((test-dirs (tests:get-tests-search-path configdat area-dat)))

	      (debug:print 0 "ERROR: local query failed; cmd=" cmd ", run-id=" run-id ", params=" params ". Trying again.")
	      (thread-sleep! (/ (random 5000) 1000)) ;; some random delay 
	      (rmt:open-qry-close-locally cmd run-id area-dat params remretries: (- remretries 1)))
	    (begin
	      (debug:print 0 "ERROR: too many retries in rmt:open-qry-close-locally, giving up")
	      #f))
	(begin
	  ;; (rmt:update-db-stats run-id cmd params duration)
	  ;; mark this run as dirty if this was a write
	  (if (not (member cmd api:read-only-queries))
	      (let ((start-time (current-seconds)))
		(mutex-lock! *db-multi-sync-mutex*)
		;; (if (not (hash-table-ref/default *db-local-sync* run-id #f))
		;; just set it every time. Is a write more expensive than a read and does it matter?
		(hash-table-set! *db-local-sync* (or run-id 0) start-time) ;; the oldest "write"

					   (mutex-lock! multi-run-mutex)
					   (set! result (append result res))
					   (mutex-unlock! multi-run-mutex))
					 (debug:print 0 "ERROR: get-tests-for-run-mindata failed for run-id " hed ", testpatt " testpatt ", states " states ", status " status ", not-in " not-in))))
				 (conc "multi-run-thread for run-id " hed)))
		     (newthreads (cons newthread threads)))
		(thread-start! newthread)
		(thread-sleep! 0.05) ;; give that thread some time to start
		(if (null? tal)
		    newthreads
		    (loop (car tal)(cdr tal) newthreads))))))
    result))

;; ;; IDEA: Threadify these - they spend a lot of time waiting ...
;; ;;

	 (test-names         #f)  ;; (tests:filter-test-names all-test-names test-patts))
	 (required-tests     #f)  ;;(lset-intersection equal? (string-split test-patts ",") test-names))) ;; test-names)) ;; Added test-names as initial for required-tests but that failed to work
	 (task-key           (conc (hash-table->alist flags) " " (get-host-name) " " (current-process-id)))
	 (tdbdat             (tasks:open-db area-dat)))

    (if (tasks:need-server run-id area-dat)(tasks:start-and-wait-for-server tdbdat run-id 10))


    (let ((sighand (lambda (signum)
		     ;; (signal-mask! signum) ;; to mask or not? seems to cause issues in exiting
		     (set! *time-to-exit* #t)
		     (print "Received signal " signum ", cleaning up before exit. Please wait...")
		     ;;   (let ((tdbdat (tasks:open-db area-dat)))
		     (let ((th1 (make-thread (lambda ()
					       (let ((tdbdat (tasks:open-db)))
						 (rmt:tasks-set-state-given-param-key task-key "killed"))
					       (print "Killed by signal " signum ". Exiting")
					       (exit))))
			   (th2 (make-thread (lambda ()
					       (thread-sleep! 3)
					       (debug:print 0 "Done")
					       (exit 4)))))
		       (thread-start! th2)
		       (thread-start! th1)
		       (thread-join! th2)))))
      (set-signal-handler! signal/int sighand)
      (set-signal-handler! signal/term sighand))

    ;; register this run in monitor.db
    (rmt:tasks-add "run-tests" user target runname test-patts task-key area-dat) ;; params)
    (rmt:tasks-set-state-given-param-key task-key "running" area-dat)
    (runs:set-megatest-env-vars run-id area-dat inkeys: keys inrunname: runname) ;; these may be needed by the launching process
    (if (file-exists? runconfigf)
	(setup-env-defaults runconfigf run-id *already-seen-runconfig-info* keyvals target)
	(debug:print 0 "WARNING: You do not have a run config file: " runconfigf))

    ;; Now generate all the tests lists
    (set! all-tests-registry (tests:get-all area-dat))
    (set! all-test-names     (hash-table-keys all-tests-registry))
    (set! test-names         (tests:filter-test-names all-test-names test-patts))

    ;; I think seeding required-tests with all test-names makes sense but lack analysis to back that up.
    ;;
    ;; (set! required-tests     (lset-intersection equal? (string-split test-patts ",") all-test-names))
    (set! required-tests     (lset-intersection equal? test-names all-test-names))
    
    ;; look up all tests matching the comma separated list of globs in
    ;; test-patts (using % as wildcard)

    ;; (set! test-names (delete-duplicates (tests:get-valid-tests toppath test-patts)))
    (debug:print-info 0 "tests search path: " (string-intersperse (tests:get-tests-search-path configdat area-dat " ")))
    ;; (debug:print-info 0 "tests search path: " (string-intersperse (tests:get-tests-search-path *configdat*) " "))
    (debug:print-info 0 "all tests:         " (string-intersperse (sort all-test-names string<) " "))
    (debug:print-info 0 "test names:        " (string-intersperse (sort test-names string<) " "))
    (debug:print-info 0 "required tests:    " (string-intersperse (sort required-tests string<) " "))

    ;; on the first pass or call to run-tests set FAILS to NOT_STARTED if
    ;; -keepgoing is specified
    (if (eq? *passnum* 0)
	(begin
	  ;; Is this still necessary? I think not. Unreachable tests are marked as such and 
	  ;; should not cause problems here.

             ;;    		   (not (member x allinqueue)))
             ;;    		 prereqstrs))
	     (give-up    #f))

	;; We can get here when a prereq has not been run due to *it* having a prereq that failed.
	;; We need to use this to dequeue this item as CANNOTRUN
	;; 
	(if (member 'toplevel testmode) ;; '(toplevel)) ;; NOTE: this probably should be (member 'toplevel testmode)
	    (for-each (lambda (prereq)
			(if (eq? (hash-table-ref/default test-registry prereq 'justfine) 'CANNOTRUN)
			    (set! give-up #t)))
		      prereqstrs))

	(if (and give-up
		 (not (and (null? tal)(null? reg))))

	 (num-running             (list-ref run-limits-info 1))
	 (num-running-in-jobgroup (list-ref run-limits-info 2)) 
	 (max-concurrent-jobs     (list-ref run-limits-info 3))
	 (job-group-limit         (list-ref run-limits-info 4))
	 (prereqs-not-met         (rmt:get-prereqs-not-met run-id waitons item-path testmode area-dat itemmap: itemmap))
	 ;; (prereqs-not-met         (mt:lazy-get-prereqs-not-met run-id waitons item-path mode: testmode itemmap: itemmap))
	 (fails                   (runs:calc-fails prereqs-not-met))
	 (non-completed           (filter (lambda (x)             ;; remove hed from not completed list, duh, of course it is not completed!
					    (not (equal? x hed)))
					  (runs:calc-not-completed prereqs-not-met)))
	 (loop-list               (list hed tal reg reruns))
	 ;; configure the load runner
	 (numcpus                 (common:get-num-cpus))
	 (maxload                 (string->number (or (configf:lookup configdat "jobtools" "maxload") "3")))
	 (waitdelay               (string->number (or (configf:lookup configdat "jobtools" "waitdelay") "60"))))
    (debug:print-info 4 "have-resources: " have-resources " prereqs-not-met: (" 
		      (string-intersperse 
		       (map (lambda (t)
			      (if (vector? t)
				  (conc (db:test-get-state t) "/" (db:test-get-status t))
				  (conc " WARNING: t is not a vector=" t )))
			    prereqs-not-met)
		       ", ") ") fails: " fails
		       "\nregistered? " (hash-table-ref/default test-registry (db:test-make-full-name test-name item-path) #f))
			    

    
    (if (and (not (null? prereqs-not-met))
	     (runs:lownoise (conc "waiting on tests " prereqs-not-met hed) 60))
	(debug:print-info 2 "waiting on tests; " (string-intersperse (runs:mixed-list-testname-and-testrec->list-of-strings prereqs-not-met) ", ")))

    ;; Don't know at this time if the test have been launched at some time in the past
    ;; i.e. is this a re-launch?

      ;; could have done hed tal here but doing car/cdr of newtal to rotate tests
      (list (car newtal)(cdr newtal) reg reruns))
     
     ;; This is the final stage, everything is in place so launch the test
     ;;
     ((and have-resources
	   (or (null? prereqs-not-met)
	       (and (member 'toplevel testmode) ;;  'toplevel)
		    (null? non-completed))))
      ;; (hash-table-delete! *max-tries-hash* (db:test-make-full-name test-name item-path))
      ;; we are going to reset all the counters for test retries by setting a new hash table
      ;; this means they will increment only when nothing can be run
      (set! *max-tries-hash* (make-hash-table))
      ;; well, first lets see if cpu load throttling is enabled. If so wait around until the
      ;; average cpu load is under the threshold before continuing

      ;; a message and drop hed from the items to be processed.
      ;; (runs:mixed-list-testname-and-testrec->list-of-strings prereqs-not-met)
      (if (and (not (null? prereqs-not-met))
	       (runs:lownoise (conc "waiting on tests " prereqs-not-met hed) 60))
	  (debug:print-info 1 "waiting on tests; " (string-intersperse 
						    (runs:mixed-list-testname-and-testrec->list-of-strings 
						     prereqs-not-met) ", ")))
      (if (or (null? fails)
	      (member 'toplevel testmode))
	  (begin
	    ;; couldn't run, take a breather
	    (if  (runs:lownoise "Waiting for more work to do..." 60)
		 (debug:print-info 0 "Waiting for more work to do..."))
	    (thread-sleep! 1)
	    (list (car newtal)(cdr newtal) reg reruns))
	  ;; the waiton is FAIL so no point in trying to run hed ever again

				  reruns))))
		     (else
		      (if (runs:lownoise (conc "FAILED prerequitests and we tried" hed) 60)
			  (debug:print 0 "WARNING: test " hed " has FAILED prerequitests and we've tried at least 10 times to run it. Giving up now."))
		      ;; (debug:print 0 "         prereqs: " prereqs-not-met)
		      (hash-table-set! test-registry hed 'removed)
		      (mt:test-set-state-status-by-testname run-id test-name item-path "NOT_STARTED" "TEN_STRIKES" #f)
		      ;; I'm unclear on if this roll up is needed - it may be the root cause of the "all set to FAIL" bug.
		      (rmt:roll-up-pass-fail-counts run-id test-name item-path "FAIL") ;; treat as FAIL
		      (list (if (null? tal)(car newtal)(car tal))
			    tal
			    reg
			    reruns)))))
	      ;; can't drop this - maybe running? Just keep trying
	      (let ((runable-tests (runs:runable-tests prereqs-not-met)))
		(if (null? runable-tests)

	(if (and (common:low-noise-print 60 "try start server"  run-id)
		 (tasks:need-server run-id area-dat))
	    (tasks:start-and-wait-for-server tdbdat run-id 10)) ;; NOTE: delay and wait is done under the hood
	
	(if (> num-running 0)
	  (set! last-time-some-running (current-seconds)))

      (if (> (current-seconds)(+ last-time-some-running (or (configf:lookup *configdat* "setup" "give-up-waiting") 36000)))
	  (hash-table-set! *max-tries-hash* tfullname (+ (hash-table-ref/default *max-tries-hash* tfullname 0) 1)))
	;; (debug:print 0 "max-tries-hash: " (hash-table->alist *max-tries-hash*))

	;; Ensure all top level tests get registered. This way they show up as "NOT_STARTED" on the dashboard
	;; and it is clear they *should* have run but did not.
	(if (not (hash-table-ref/default test-registry (db:test-make-full-name test-name "") #f))
	    (begin

		   ;; run-ids = #f means *all* runs
		   (let ((running-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f area-dat)))
		     (if (not (null? running-tests)) ;; have to skip 
			 (set! skip-test "Skipping due to previous tests running"))))
		  ((and skip-check
			(configf:lookup test-conf "skip" "fileexists"))
		   (if (file-exists? (configf:lookup test-conf "skip" "fileexists"))
		       (set! skip-test (conc "Skipping due to existance of file " (configf:lookup test-conf "skip" "fileexists")))))

		  ((and skip-check
			(configf:lookup test-conf "skip" "rundelay"))
		   ;; run-ids = #f means *all* runs
		   (let* ((numseconds      (common:hms-string->seconds (configf:lookup test-conf "skip" "rundelay")))
			  (running-tests   (rmt:get-tests-for-runs-mindata #f full-test-name '("RUNNING" "REMOTEHOSTSTART" "LAUNCHED") '() #f))
			  (completed-tests (rmt:get-tests-for-runs-mindata #f full-test-name '("COMPLETED") '("PASS" "FAIL" "ABORT") #f))
			  (last-run-times  (map db:mintest-get-event_time completed-tests))
			  (time-since-last (- (current-seconds) (if (null? last-run-times) 0 (apply max last-run-times)))))
		     (if (or (not (null? running-tests)) ;; have to skip if test is running
			     (> numseconds time-since-last))
			 (set! skip-test (conc "Skipping due to previous test run less than " (configf:lookup test-conf "skip" "rundelay") " ago"))))))
		 
		 (if skip-test
		     (begin
		       (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags))
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")

				(debug:print-info 2 "still waiting, " (length tests) " tests still running")
				(thread-sleep! 10)
				(let ((new-tests (proc-get-tests run-id)))
				  (if (null? new-tests)
				      (debug:print-info 1 "Run completed according to zero tests matching provided criteria.")
				      (loop (car new-tests)(cdr new-tests)))))
			       ((archive)
				(if (and run-dir (not toplevel-with-children))
				    (let ((ddir (conc run-dir "/")))
				      (case (string->symbol (args:get-arg "-archive"))
					((save save-remove keep-html)
					 (if (file-exists? ddir)
					     (debug:print-info 0 "Estimating disk space usage for " test-fulln ": " (common:get-disk-space-used ddir)))))))

				(if (not (null? tal))
				    (loop (car tal)(cdr tal))))
			       )))
		       )
		     (if worker-thread (thread-join! worker-thread))))))
	   ;; remove the run if zero tests remain
	   (if (eq? action 'remove-runs)

setenv PATH `readlink -f ../bin`:$PATH

export PATH=$(readlink -f ../bin):$PATH

# Archives will be organised under these paths like this:
#  <testsuite>/<creationdate>
# Within the archive the data is structured like this:
#  <target>/<runname>/<test>/
disk0 /tmp/#{getenv USER}/adisk1

# Uncomment these to emulate a job queue with a long time (look in bin/sleeprunner for the time)
[jobtools]
launcher #{scheme (case (string->symbol (conc (getenv "datapath"))) \
                      ((none) "nbfake") \
                      ((openlava) "bsub") \
                      (else "sleeprunner"))}

# launcher bsub -q priority -o $MT_TEST_RUN_DIR/openlava.log 

[configf:settings trim-trailing-spaces yes]

[test]
# VAL1 has trailing spaces
VAL1 Foo    
VAL2 ==>#{get test VAL1}Bar<== no spaces between Foo and Bar to pass

[ezsteps]
calcresults megatest -list-runs $MT_RUNNAME -target $MT_TARGET

[requirements]
waiton                      exit_0 exit_1  ez_exit2_fail  ez_fail        ez_pass              ezlog_fail \
       ezlog_fail_then_pass ezlog_pass     ezlog_warn     lineitem_fail  lineitem_pass        logpro_required_fail \
       manual_example       neverrun       priority_1     priority_10    priority_10_waiton_1 \
       priority_3           priority_4     priority_5     priority_6     priority_7           priority_8 \
       priority_9           runfirst       singletest     singletest2    sqlitespeed          test_mt_vars \
       ez_fail_quick        test1          test2

# This is a "toplevel" test, it does not require waitons to be non-FAIL to run
mode toplevel

[setup]
runscript main.sh

[requirements]
priority 7

[skip]
# Run only if this much time since last run of this test
rundelay 10m 5s

[test_meta]
author matt
owner  bob
description This test checks that a multi-lineitem test with mix of pass and non-fail rolls up a PASS

tags first,single
reviewed 09/10/2011, by Matt

IUPBRANCH=iup-3.10.1

# Eggs to install (straightforward ones)
EGGS=matchable readline apropos base64 regex-literals format regex-case test coops trace csv \
     dot-locking posix-utils posix-extras directory-utils hostinfo tcp-server rpc csv-xml fmt \
     json md5 awful http-client spiffy uri-common intarweb spiffy-request-vars \
     spiffy-directory-listing ssax sxml-serializer sxml-modifications sql-de-lite \
     srfi-19 refdb ini-file sparse-vectors z3 call-with-environment-variables

#
# Derived variables
#

ifeq ($(PROXY),)
PROX:=

ARCHSIZE=64_
endif

CSCLIBS=$(shell echo $(LD_LIBRARY_PATH) | sed 's/:/ -L/g')
CSC_OPTIONS="-I$(PREFIX)/include -L$(CSCLIBS) -C \"-fPIC\""
# CSC_OPTIONS=-I$(PREFIX)/include -L$(CSCLIBS)

all : chkn eggs libiup logprobin $(PREFIX)/lib/sqlite3.so $(PREFIX)/bin/hs \
        $(PREFIX)/lib/chicken/7/mutils.so \
        $(PREFIX)/lib/chicken/7/dbi.so \
        $(PREFIX)/lib/chicken/7/stml.so \
        $(PREFIX)/lib/chicken/7/margs.so

chkn : $(CHICKEN_INSTALL)

eggs : $(EGGSOFILES)

# libiup : $(PREFIX)/lib/libavcall.a 
libiup : $(CHICKEN_EGG_DIR)/iup.so $(CHICKEN_EGG_DIR)/canvas-draw.so

$(EGGFLAGS) : # $(CHICKEN_INSTALL)
	mkdir -p eggflags
	touch $(EGGFLAGS)

# some setup stuff
#
$(PREFIX)/setup-chicken4x.sh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo 'export PATH=$(PREFIX)/bin:$$PATH' > $(PREFIX)/setup-chicken4x.sh)
	(echo "export LD_LIBRARY_PATH=$(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.sh)

$(PREFIX)/setup-chicken4x.csh : $(EGGFLAGS)
	mkdir -p $(PREFIX)
	(echo "setenv PATH $(PREFIX):'$$'PATH" > $(PREFIX)/setup-chicken4x.csh)
	(echo "setenv LD_LIBRARY_PATH $(LD_LIBRARY_PATH)" >> $(PREFIX)/setup-chicken4x.csh)

chicken-core/chicken.scm : chicken-$(CHICKEN_VERSION).tar.gz
	tar xfz chicken-$(CHICKEN_VERSION).tar.gz
	ln -sf chicken-$(CHICKEN_VERSION) chicken-core


chicken-4.9.0rc1.tar.gz : 
	wget http://code.call-cc.org/dev-snapshots/2014/04/17/chicken-4.9.0rc1.tar.gz

chicken-4.9.0.1.tar.gz :
	wget http://code.call-cc.org/releases/4.9.0/chicken-4.9.0.1.tar.gz

# git clone git://code.call-cc.org/chicken-core
# git clone http://code.call-cc.org/git/chicken-core.git

$(CHICKEN_INSTALL) : chicken-core/chicken.scm $(PREFIX)/setup-chicken4x.sh $(PREFIX)/setup-chicken4x.csh
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX)
	cd chicken-core;make PLATFORM=linux PREFIX=$(PREFIX) install

#======================================================================
# S Q L I T E 3
#======================================================================

# opensrc

opensrc.fossil :
	fossil clone http://www.kiatoa.com/fossils/opensrc opensrc.fossil

opensrc/histstore/histstore.scm : opensrc.fossil
	mkdir -p opensrc
	cd opensrc;if [ -e .fslckout ];then fossil update; else fossil open ../opensrc.fossil; fi

$(PREFIX)/lib/chicken/7/mutils.so : opensrc/histstore/histstore.scm
	cd opensrc/mutils;chicken-install

$(PREFIX)/lib/chicken/7/dbi.so : opensrc/dbi/dbi.scm
	cd opensrc/dbi;chicken-install

$(PREFIX)/lib/chicken/7/margs.so : opensrc/margs/margs.scm
	cd opensrc/margs;chicken-install

opensrc/histstore/hs : opensrc/histstore/histstore.scm chkn eggs $(PREFIX)/lib/sqlite3.so 
	cd opensrc/histstore;$(PREFIX)/bin/csc histstore.scm -o hs

$(PREFIX)/bin/hs : opensrc/histstore/hs 
	cp -f opensrc/histstore/hs $(PREFIX)/bin/hs

# stml
stml.fossil :
	fossil clone http://www.kiatoa.com/fossils/stml stml.fossil

# open touches the .fossil :(
stml/requirements.scm.template : stml.fossil
	mkdir -p stml
	cd stml;if [ -e .fslckout ];then fossil update; else fossil open ../stml.fossil;fi

stml/requirements.scm : stml/requirements.scm.template
	cp stml/install.cfg.template      stml/install.cfg
	cp stml/requirements.scm.template stml/requirements.scm

$(PREFIX)/lib/chicken/7/stml.so : stml/requirements.scm
	cd stml;make

#======================================================================
# I U P 
#======================================================================

ffcall.fossil :
	fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil

$(PREFIX)/lib/libiup.so $(PREFIX)/include/iup.h : iup/installall.sh iup/alldone
	cd iup && ./installall.sh

# $(PREFIX)/lib/libiup.so : iup/iup/alldone
#	touch -c $(PREFIX)/lib/libiup.so

$(CHICKEN_EGG_DIR)/iup.so : $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	LD_LIBRARY_PATH=$(LD_LIBRARY_PATH) CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks -feature disable-iup-web iup

$(CHICKEN_EGG_DIR)/canvas-draw.so :  $(PREFIX)/lib/libiup.so  $(PREFIX)/lib/libavcall.a 
	CSC_OPTIONS=$(CSC_OPTIONS) $(CHICKEN_INSTALL) $(PROX) -D no-library-checks canvas-draw


clean :
	rm -rf chicken-4.8.0 eggflags ffcall sqlite-autoconf-$(SQLITE3_VERSION)