Megatest

			   ;; get the sender info
			   ;; this should match (server:get-client-signature)
			   ;; we will need to process "all" messages here some day
			   (rmsg sub-socket)
			   ;; now get the actual message
			   (set! res (db:string->obj (rmsg  sub-socket))))))
	 (timeout (lambda ()
		    (thread-sleep! 120)
		    (if (not res)
			(if (> numretries 0)
			    (begin
			      (debug:print 0 "WARNING: no reply to query " params ", trying again")
			      (apply cdb:client-call zmq-sockets qtype immediate (- numretries 1) params))
			    (begin
			      (debug:print 0 "ERROR: cdb:client-call timed out " params ", exiting.")

	'(test-set-rundir-by-test-id "UPDATE tests SET rundir=? WHERE id=?")
	'(test-set-rundir         "UPDATE tests SET rundir=? WHERE run_id=? AND testname=? AND item_path=?;")
	'(delete-tests-in-state   "DELETE FROM tests WHERE state=? AND run_id=?;")
	'(tests:test-set-toplog   "UPDATE tests SET final_logf=? WHERE run_id=? AND testname=? AND item_path='';")
    ))

;; do not run these as part of the transaction
(define db:special-queries   '(;; rollup-tests-pass-fail
			       ;; db:roll-up-pass-fail-counts
                               login
                               immediate
			       flush
			       set-verbosity
			       killserver))

;; not used, intended to indicate to run in calling process
(define db:run-local-queries '()) ;; rollup-tests-pass-fail))

;; The queue is a list of vectors where the zeroth slot indicates the type of query to
;; apply and the second slot is the time of the query and the third entry is a list of 
;; values to be applied

				   (equal? megatest-version calling-vers))
			      (begin
				(hash-table-set! *logged-in-clients* client-key (current-seconds))
				(server:reply  pubsock return-address '(#t "successful login")))      ;; path matches - pass! Should vet the caller at this time ...
			      (list #f (conc "Login failed due to mismatch paths: " calling-path ", " *toppath*))))))
		   ((flush)
		    (server:reply pubsock return-address '(#t "sucessful flush")))
		   ((set-verbosity)
		    (set! *verbosity* (car params))
		    (server:reply pubsock return-address '(#t *verbosity*)))
		   ((killserver)
		    (debug:print 0 "WARNING: Server going down in 15 seconds by user request!")
		    (open-run-close tasks:server-deregister tasks:open-db 
				    (cadr *server-info*)
				    pullport: (caddr *server-info*))
		    (thread-start! (make-thread (lambda ()(thread-sleep! 15)(exit))))
		    (server:reply pubsock return-address '(#t "exit process started")))
		   (else
		    (debug:print 0 "ERROR: Unrecognised queued call " qry " " params)
		    (server:reply pubsock return-address #t)))))
	       (if (not (null? stmts))
		   (outerloop #f stmts)))

	     ;; handle normal queries
	     (let ((rem (sqlite3:with-transaction 
			 db
			 (lambda ()

     run-id test-name)
    res))

;; Rollup the pass/fail counts from itemized tests into fail_count and pass_count
(define (db:roll-up-pass-fail-counts db run-id test-name item-path status)
  ;; (cdb:flush-queue *runremote*)
  (if (and (not (equal? item-path ""))

	   (member status '("PASS" "WARN" "FAIL" "WAIVED" "RUNNING" "CHECK")))



      (begin
	(sqlite3:execute 
	 db
	 "UPDATE tests 
             SET fail_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND status='FAIL'),
                 pass_count=(SELECT count(id) FROM tests WHERE run_id=? AND testname=? AND item_path != '' AND (status='PASS' OR status='WARN' OR status='WAIVED'))
             WHERE run_id=? AND testname=? AND item_path='';"
	 run-id test-name run-id test-name run-id test-name)
        ;; (thread-sleep! 0.1) ;; give other processes a chance here, no, better to be done ASAP?
	(if (equal? status "RUNNING") ;; running takes priority over all other states, force the test state to RUNNING
	    (sqlite3:execute db "UPDATE tests SET state=? WHERE run_id=? AND testname=? AND item_path='';" "RUNNING" run-id test-name)
	    (sqlite3:execute
	     db
	     "UPDATE tests
                       SET state=CASE 
                                   WHEN (SELECT count(id) FROM tests 
                                                WHERE run_id=? AND testname=?
                                                     AND item_path != '' 
                                                     AND state in ('RUNNING','NOT_STARTED')) > 0 THEN 'RUNNING'
                                   ELSE 'COMPLETED' END,
                                      status=CASE 
                                            WHEN fail_count > 0 THEN 'FAIL' 
                                            WHEN pass_count > 0 AND fail_count=0 THEN 'PASS' 
                                            ELSE 'UNKNOWN' END
                       WHERE run_id=? AND testname=? AND item_path='';"
	     run-id test-name run-id test-name))
	#f)
      #f))

;;======================================================================
;; Tests meta data

  (let* ((tconfig                 (tests:testqueue-get-testconfig test-record))
	 (jobgroup                (config-lookup tconfig "requirements" "jobgroup"))
	 (num-running             (cdb:remote-run db:get-count-tests-running #f))
	 (num-running-in-jobgroup (cdb:remote-run db:get-count-tests-running-in-jobgroup #f jobgroup))
	 (max-concurrent-jobs     (let ((mcj (config-lookup *configdat* "setup"     "max_concurrent_jobs")))
				    (if (and mcj (string->number mcj))
					(string->number mcj)
					1)))
	 (job-group-limit         (config-lookup *configdat* "jobgroups" jobgroup)))
    (if (not (eq? *last-num-running-tests* num-running))
	(begin
	  (debug:print 2 "max-concurrent-jobs: " max-concurrent-jobs ", num-running: " num-running)
	  (set! *last-num-running-tests* num-running)))
    (if (not (eq? 0 *globalexitstatus*))
	(list #f num-running num-running-in-jobgroup max-concurrent-jobs job-group-limit)

(define (server:mk-signature)
  (message-digest-string (md5-primitive) 
			 (with-output-to-string
			   (lambda ()
			     (write (list (current-directory)
					  (argv)))))))

;;======================================================================
;; C L I E N  T S
;;======================================================================

(define (server:get-client-signature)
  (if *my-client-signature* *my-client-signature*
      (let ((sig (server:mk-signature)))
	(set! *my-client-signature* sig)
	*my-client-signature*)))

			   units    ","
			   dcomment ",," ;; extra comma for status
			   type     )))
	    (cdb:remote-run db:csv->test-data #f test-id
				dat))))
      
    ;; need to update the top test record if PASS or FAIL and this is a subtest
    (if (not (equal? item-path ""))
	(cdb:roll-up-pass-fail-counts *runremote* run-id test-name item-path status))

    (if (or (and (string? comment)
		 (string-match (regexp "\\S+") comment))
	    waived)
	(let ((cmt  (if waived waived comment)))
	  (cdb:remote-run db:test-set-comment #f test-id cmt)))
    ))


(define (tests:test-set-toplog! db run-id test-name logf) 
  (cdb:client-call *runremote* 'tests:test-set-toplog #t 2 logf run-id test-name))

(define (tests:summarize-items db run-id test-name force)
  ;; if not force then only update the record if one of these is true:
  ;;   1. logf is "log/final.log
  ;;   2. logf is same as outputfilename
  (let* ((outputfilename (conc "megatest-rollup-" test-name ".html"))
	 (orig-dir       (current-directory))

                                      (save-environment-as-files "nada")
                                      (and (file-exists? "nada.sh")
    			                 (file-exists? "nada.csh"))))

(test #f #t (cdb:client-call *runremote* 'immediate #f 1 (lambda ()(display "Got here eh!?") #t)))

;; (set! *verbosity* 20)
(test #f *verbosity* (cadr (cdb:set-verbosity *runremote* *verbosity*)))
(test #f #f (cdb:roll-up-pass-fail-counts *runremote* 1 "test1" "" "PASS"))
;; (set! *verbosity* 1)
;; (cdb:set-verbosity *runremote* *verbosity*)

(test "get all legal tests" (list "test1" "test2") (sort (get-all-legal-tests) string<=?))

						    (db:get-keys *db*)
						    '(("SYSTEM" "key1")("RELEASE" "key2"))
						    "myrun" 
						    "new"
						    "n/a" 
						    "bob")))

(test #f #t             (cdb:tests-register-test *runremote* 1 "nada" ""))
(test #f 1              (cdb:remote-run db:get-test-id #f 1 "nada" ""))
(test #f "NOT_STARTED"  (vector-ref (open-run-close db:get-test-info #f 1 "nada" "") 3))
(test #f "NOT_STARTED"  (vector-ref (cdb:get-test-info *runremote* 1 "nada" "") 3))

(define keys (db:get-keys *db*))

;;======================================================================

				(> (length steps) 0)))
(test "Get nice table for steps" "2.0s"
      (begin
	(vector-ref (hash-table-ref (open-run-close db:get-steps-table #f test-id) "step1") 4)))

;; (exit)

(test #f "myrun" (cdb:remote-run db:get-run-name-from-id #f 1))

(test #f "dunno" (cdb:remote-run db:roll-up-pass-fail-counts #f 1 "nada" "" "PASS"))

;;======================================================================
;; R E M O T E   C A L L S 
;;======================================================================

(define start-wait (current-seconds))
(print "Starting intensive cache and rpc test")
(for-each (lambda (params)
	    (print "Intensive: params=" params)
	    (cdb:tests-register-test *runremote* 1 (conc "test" (random 20)) "")
	    (apply cdb:test-set-status-state *runremote* test-id params)
	    (cdb:pass-fail-counts *runremote* test-id (random 100) (random 100))
	    (cdb:test-rollup-test_data-pass-fail *runremote* test-id)
	    (thread-sleep! 0.01)) ;; cache ordering granularity is at the second level. Should really be at the ms level
	  '(("COMPLETED"    "PASS" #f)
	    ("NOT_STARTED"  "FAIL" "Just testing")

	    ("NOT_STARTED"  "FAIL" "Just testing")
	    ("NOT_STARTED"  "FAIL" "Just testing")
	    ("COMPLETED"    "PASS" #f)
	    ("NOT_STARTED"  "FAIL" "Just testing")
	    ("KILLED"       "UNKNOWN" "More testing")
	    ("KILLED"       "UNKNOWN" "More testing")
	    ))

;; now set all tests to completed
(cdb:flush-queue *runremote*)
(let ((tests (cdb:remote-run db:get-tests-for-run #f 1 "%" '() '())))
  (print "Setting " (length tests) " to COMPLETED/PASS")
  (for-each
   (lambda (test)
     (cdb:test-set-status-state *runremote* (db:test-get-id test) "COMPLETED" "PASS" "Forced pass"))
   tests))



;; (process-wait server-pid)
;; (test "Server wait time" #t (let ((run-delta (- (current-seconds) start-wait)))
;; 			      (print "Server ran for " run-delta " seconds")
;; 			      (> run-delta 20)))

(test "Rollup the run(s)" #t (begin
			       (runs:rollup-run keys (keys->alist keys "na") "rollup" "matt")
			       #t))

(hash-table-set! args:arg-hash ":runname" "%")

(test "Remove the rollup run" #t (begin (operate-on 'remove-runs)))

(print "Waiting for server to be done, should be about 20 seconds")
(cdb:kill-server *runremote*)

;; (thread-join! th1 th2 th3)

;; ADD ME!!!! (db:get-prereqs-not-met *db* 1 '("runfirst") "" mode: 'normal)
;; ADD ME!!!! (rdb:get-tests-for-run *db* 1 "runfirst" #f '() '())