Megatest

    (if (file-exists? cname)
	(let* ((dat  (read-config cname #f #f))
	       (csvr (db:logpro-dat->csv dat stepname))
	       (csvt (let-values (( (fmt-cell fmt-record fmt-csv) (make-format ",")))
				 (fmt-csv (map list->csv-record csvr))))
	       (status (configf:lookup dat "final" "exit-status"))
	       (msg     (configf:lookup dat "final" "message")))
          ;;(if csvt  ;; this if blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
              (rmt:csv->test-data run-id test-id csvt)
            ;;  (BB> "Error: run-id/test-id/stepname="run-id"/"test-id"/"stepname" => bad csvr="csvr)
            ;;  )
	  (cond
	   ((equal? status "PASS") "PASS") ;; skip the message part if status is pass
	   (status (conc (configf:lookup dat "final" "exit-status") ": " (if msg msg "no message")))
	   (else #f)))
	#f)))

(define (launch:runstep ezstep run-id test-id exit-info m tal testconfig)

;; NOTE: Run this local with #f for db !!!
(define (tdb:load-test-data run-id test-id)
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 *default-log-port* lin)
          ;;(when lin ;; this when blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
          (rmt:csv->test-data run-id test-id lin)
          ;;)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status too 
  (rmt:test-data-rollup run-id test-id #f))

;; NOTE: Run this local with #f for db !!!
(define (tdb:load-logpro-data run-id test-id)
  (let loop ((lin (read-line)))
    (if (not (eof-object? lin))
	(begin
	  (debug:print 4 *default-log-port* lin)
          ;;(when lin  ;; this when blocked stack dump caused by .dat file from logpro being 0-byte.  fixed by upgrading logpro
          (rmt:csv->test-data run-id test-id lin)
          ;;)
	  (loop (read-line)))))
  ;; roll up the current results.
  ;; FIXME: Add the status too 
  (rmt:test-data-rollup run-id test-id #f))

(define (tdb:get-prev-tol-for-test tdb test-id category variable)
  ;; Finish me?

#  This program is distributed WITHOUT ANY WARRANTY; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#  PURPOSE.

echo You may need to do the following first:
echo sudo apt-get install libreadline-dev
echo sudo apt-get install libwebkitgtk-dev 
echo sudo apt-get install libpangox-1.0-0 zlib1g-dev libfreetype6-dev cmake
echo sudo apt-get install libssl-dev
echo sudo apt-get install libmotif3 -OR- set KTYPE=26g4
echo
echo Set OPTION to std, currently OPTION=$OPTION
echo
echo Additionally, if you want mysql-client, you will need to make sure
echo mysql_config is in your path
echo
echo You are using PREFIX=$PREFIX
echo You are using proxy="$proxy"
echo 
echo "Set additional_libpath to help find gtk or other libraries, don't forget a leading :"

SYSTEM_TYPE=$(lsb_release -irs |tr ' ' '_' |tr '\n' '-')$(uname -i)-$OPTION

# Set up variables
#
case $SYSTEM_TYPE in
Ubuntu-16.04-x86_64-std)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	;;
Ubuntu-16.04-i686-std)
	KTYPE=32
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
	;;
SUSE_LINUX_11-x86_64-std)
  KTYPE=26g4 
	CDVER=5.10
	IUPVER=3.17
	IMVER=3.11
  ;;
CentOS_5.11-x86_64-std)
  KTYPE=24g3 
  CDVER=5.4.1
  IUPVER=3.5
  IMVER=3.6.3
  ;; 
esac
			   
echo KTYPE=$KTYPE			  
echo CDVER=$CDVER
echo IUPVER=$IUPVER
echo IMVER=$IMVER	
# NOTES:
#
# Centos with security setup may need to do commands such as following as root:
#
# NB// fix the paths first
#
# for a in /localdisk/chicken/4.8.0/lib/*.so;do chcon -t textrel_shlib_t $a; done 

export PATH=$PREFIX/bin:$PATH
export LIBPATH=$PREFIX/lib:$PREFIX/lib64:$ADDITIONAL_LIBPATH
export LD_LIBRARY_PATH=$LIBPATH
export CHICKEN_INSTALL=$PREFIX/bin/chicken-install
mkdir -p $PREFIX
echo "export PATH=$PREFIX/bin:\$PATH" > $PREFIX/setup-chicken4x.sh
echo "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:\$LD_LIBRARY_PATH" >> $PREFIX/setup-chicken4x.sh
echo "export CHICKEN_DOC_PAGER=cat" >> $PREFIX/setup-chicken4x.sh

echo "setenv PATH $PREFIX/bin:\$PATH" > $PREFIX/setup-chicken4x.csh
echo "setenv LD_LIBRARY_PATH $LD_LIBRARY_PATH:\$LD_LIBRARY_PATH" >> $PREFIX/setup-chicken4x.csh
echo "setenv CHICKEN_DOC_PAGER cat" >> $PREFIX/setup-chicken4x.csh

echo PATH=$PATH
echo LD_LIBRARY_PATH=$LD_LIBRARY_PATH

if ! [[ -e $PREFIX/bin/csi ]]; then
    tar xfz tgz/$chicken_targz
    cd chicken-${CHICKEN_VERSION}

# for f in matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5; do
# $CHICKEN_INSTALL $PROX -keep-installed matchable readline apropos base64 regex-literals format "regex-case" "test" coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client spiffy-request-vars md5 message-digest http-client spiffy-directory-listing
for egg in matchable readline apropos base64 regex-literals format "regex-case" "test" \
	coops trace csv dot-locking posix-utils posix-extras directory-utils hostinfo \
	tcp rpc csv-xml fmt json md5 awful http-client spiffy uri-common intarweb http-client \
	spiffy-request-vars s md5 message-digest spiffy-directory-listing ssax sxml-serializer \
	sxml-modifications logpro z3 call-with-environment-variables \
	pathname-expand typed-records simple-exceptions numbers crypt parley srfi-42 \
	alist-lib ansi-escape-sequences args basic-sequences bindings chicken-doc chicken-doc-cmd \
	cock condition-utils debug define-record-and-printer easyffi easyffi-base \
	expand-full ezxdisp filepath foof-loop ini-file irc lalr lazy-seq \
	locale locale-builtin locale-categories locale-components locale-current locale-posix \
	locale-timezone loops low-level-macros procedural-macros refdb rfc3339 scsh-process \
	sexp-diff sha1 shell slice srfi-101 srfi-19 srfi-19-core srfi-19-date srfi-19-io \
	srfi-19-period srfi-19-support srfi-19-time srfi-19-timezone srfi-29 srfi-37 srfi-78 syslog \
	udp uuid uuid-lib zlib

do
	echo "Installing $egg"
	$CHICKEN_INSTALL $PROX -keep-installed $egg
	#$CHICKEN_INSTALL $PROX $egg
	if [ $? -ne 0 ]; then
		echo "$egg failed to install"
		exit 1
	fi
done

if [[ -e `which mysql_config` ]]; then
  $CHICKEN_INSTALL $PROX -keep-installed mysql-client
fi

for egg in "sqlite3" sql-de-lite nanomsg
do
	echo "Installing $egg"
	CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib -L$PREFIX/lib64"  $CHICKEN_INSTALL $PROX -keep-installed $egg
	#CSC_OPTIONS="-I$PREFIX/include -L$PREFIX/lib -L$PREFIX/lib64"  $CHICKEN_INSTALL $PROX $egg
	if [ $? -ne 0 ]; then
		echo "$egg failed to install"
		exit 1
	fi
done
cd $BUILDHOME
cd `$PREFIX/bin/csi -p '(chicken-home)'`
curl http://3e8.org/pub/chicken-doc/chicken-doc-repo.tgz | tar zx
cd $BUILDHOME



# $CHICKEN_INSTALL $PROX sqlite3
cd $BUILDHOME
# # IUP versions
# if [[ x$USEOLDIUP == "x" ]];then
#   CDVER=5.10
#   IUPVER=3.17
#   IMVER=3.11
# else
#   CDVER=5.10
#   IUPVER=3.17
#   IMVER=3.11
# fi
# if [[ x$KTYPE == "x24g3" ]];then
#   CDVER=5.4.1
#   IUPVER=3.5
#   IMVER=3.6.3
# fi

if [[ `uname -a | grep x86_64` == "" ]]; then 
    export ARCHSIZE=''
else
    export ARCHSIZE=64_
fi
    # export files="cd-5.4.1_Linux${KTYPE}_lib.tar.gz im-3.6.3_Linux${KTYPE}_lib.tar.gz iup-3.5_Linux${KTYPE}_lib.tar.gz"

    tar -xzf tgz/`echo $a | cut -d'/' -f2` -C iup/
    #(cd $PREFIX/lib;tar xfvz $BUILDHOME/tgz/$a;mv include/* ../include)
    # (cd $DEPLOYTARG;tar xfvz $BUILDHOME/$a)
done
cp iup/include/* $PREFIX/include/
cp iup/*.so $PREFIX/lib/
cp iup/*.a $PREFIX/lib/
cp iup/ftgl/lib/*/* $PREFIX/lib/
cd $BUILDHOME
# ffcall obtained from:
# cvs -z3 -d:pserver:anonymous@cvs.savannah.gnu.org:/sources/libffcall co ffcall 
#exit
if ! [[ -e $PREFIX/include/callback.h ]] ; then
	#fossil clone http://www.kiatoa.com/fossils/ffcall ffcall.fossil
	wget -c -O ffcall.tar.gz 'http://www.kiatoa.com/fossils/ffcall/tarball?name=ffcall&uuid=trunk'

cd $BUILDHOME  

echo You may need to add $LD_LIBRARY_PATH to your LD_LIBRARY_PATH variable, a setup-chicken4x.sh 
echo file can be found in the current directory which should work for setting up to run chicken4x

echo Testing iup
$PREFIX/bin/csi -b -eval '(use iup)(print "Success")'