Megatest

           (color-off "\x1b[0m")
           (dp-args
            (append
             (list 0 *default-log-port*
                   (conc color-on location "@"(/ (- (current-milliseconds) *BB-process-starttime*) 1000) color-off "   ")  )
             in-args)))
      (apply debug:print dp-args))))

(define *BBprofile-hash* (make-hash-table))
(define (BBprofile-thunk procname thunk)
  (let* ((old-proctally (hash-table-ref/default *BBprofile-hash* procname
                                                '(0 . 0)))
         (old-proccalls (car old-proctally))
         (old-procduration (cdr old-proctally))
         (before-ms (current-milliseconds))
         (res  (thunk))
         (after-ms (current-milliseconds))
         (duration (/ (- after-ms before-ms) 1000))
         (proccalls (add1 old-proccalls))
         (procduration (+ duration old-procduration)))
    (hash-table-set! *BBprofile-hash* procname
                     (cons proccalls procduration))
    (BB> "@@@@ called "procname" ; duration="duration" ; totcalls="proccalls
         " avg="(/ procduration proccalls)" tot="procduration)
    res))
(define (BBprofile . in-args)
  (let* ((proc (car in-args))
         (args (cdr in-args))
         (procname (symbol->string (car (procedure-information proc))))
         (thunk (lambda ()
                  (apply proc args))))
    (BBprofile-thunk procname thunk)))




(define *BBpp_custom_expanders_list* (make-hash-table))



;; register hash tables with BBpp.
(hash-table-set! *BBpp_custom_expanders_list* HASH_TABLE:

;; 2. create run dir on disk, path name is meaningful
;; 3. create link from run dir to megatest runs area 
;; 4. remotely run the test on allocated host
;;    - could be ssh to host from hosts table (update regularly with load)
;;    - could be netbatch
;;      (launch-test db (cadr status) test-conf))
(define (launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat params)
  (BB> "launch-test entered")
  (mutex-lock! *launch-setup-mutex*) ;; setting variables and processing the testconfig is NOT thread-safe, reuse the launch-setup mutex
  (let* ( ;; (lock-key        (conc "test-" test-id))
	;; (got-lock        (let loop ((lock        (rmt:no-sync-get-lock lock-key))
	;; 			     (expire-time (+ (current-seconds) 15))) ;; give up on getting the lock and steal it after 15 seconds
	;; 		    (if (car lock)
	;; 			#t
	;; 			(if (> (current-seconds) expire-time)

	       (launch-delay (configf:lookup-number *configdat* "setup" "launch-delay" default: 1)))
      (if (> launch-delay delta)
	  (begin
	    (if (common:low-noise-print 1200 "test launch delay") ;; every two hours or so remind the user about launch delay.
		(debug:print-info 0 *default-log-port* "NOTE: test launches are delayed by " launch-delay " seconds. See megatest.config launch-delay setting to adjust.")) ;; launch of " test-name " for " (- launch-delay delta) " seconds"))
	    (thread-sleep! (- launch-delay delta))
	    (loop (- (current-seconds) *last-launch*) launch-delay))))
    (BB> "lt - post delay loop")
    (change-directory *toppath*)
    (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute", *maybe* - the longer they are set the longer each launch takes (must be non-overlapping with the vars)
     (append
      (list
       (list "MT_RUN_AREA_HOME" *toppath*)
       (list "MT_TEST_NAME" test-name)
       (list "MT_RUNNAME"   runname)

	   (cmdparms   #f)
	   (fullcmd    #f) ;; (define a (with-output-to-string (lambda ()(write x))))
	   (mt-bindir-path #f)
	   (testinfo   (rmt:get-test-info-by-id run-id test-id))
	   (mt_target  (string-intersperse (map cadr keyvals) "/"))
	   (debug-param (append (if (args:get-arg "-debug")  (list "-debug" (args:get-arg "-debug")) '())
				(if (args:get-arg "-logging")(list "-logging") '()))))
      (BB> "lt - in let1")
      ;; (if hosts (set! hosts (string-split hosts)))
      ;; set the megatest to be called on the remote host
      (if (not remote-megatest)(set! remote-megatest local-megatest)) ;; "megatest"))
      (set! mt-bindir-path (pathname-directory remote-megatest))
      (if launcher (set! launcher (string-split launcher)))
      ;; set up the run work area for this test
      (if (and (args:get-arg "-preclean") ;; user has requested to preclean for this run
	       (not (member (db:test-get-rundir testinfo)(list "n/a" "/tmp/badname")))) ;; n/a is a placeholder and thus not a read dir
	  (begin
	    (debug:print-info 0 *default-log-port* "attempting to preclean directory " (db:test-get-rundir testinfo) " for test " test-name "/" item-path)
	    (runs:remove-test-directory testinfo 'remove-data-only))) ;; remove data only, do not perturb the record
      
      ;; prevent overlapping actions - set to LAUNCHED as early as possible
      ;;
      ;; the following call handles waiver propogation. cannot yet condense into roll-up-pass-fail
      (tests:test-set-status! run-id test-id "LAUNCHED" "n/a" #f #f) ;; (if launch-results launch-results "FAILED"))
      (rmt:set-state-status-and-roll-up-items run-id test-name item-path #f "LAUNCHED" #f)
      (BB> "lt - set LAUNCHED state")
      ;; (pp (hash-table->alist tconfig))
      (set! diskpath (get-best-disk *configdat* tconfig))
      (if diskpath
	  (let ((dat  (BBprofile create-work-area run-id run-info keyvals test-id test-path diskpath test-name itemdat)))
	    (set! work-area (car dat))
	    (set! toptest-work-area (cadr dat))
            (BB> "lt - created work-area "work-area)

	    (debug:print-info 2 *default-log-port* "Using work area " work-area))
	  (begin
	    (set! work-area (conc test-path "/tmp_run"))
	    (create-directory work-area #t)
	    (debug:print 0 *default-log-port* "WARNING: No disk work area specified - running in the test directory under tmp_run")))
      (set! cmdparms (base64:base64-encode 
		      (z3:encode-buffer 

					(list 'target    mt_target)
					(list 'contour   contour)
					(list 'runtlim   (if run-time-limit (common:hms-string->seconds run-time-limit) #f))
					(list 'env-ovrd  (hash-table-ref/default *configdat* "env-override" '())) 
					(list 'set-vars  (if params (hash-table-ref/default params "-setvars" #f)))
					(list 'runname   runname)
					(list 'mt-bindir-path mt-bindir-path))))))))
      (BB> "lt - encoded params")
      ;; clean out step records from previous run if they exist
      ;; (rmt:delete-test-step-records run-id test-id)
      ;; if the dir does not exist we may have a itempath where individual variables are a path, launch anyway
      (if (common:file-exists? work-area)
	  (change-directory work-area)) ;; so that log files from the launch process don't clutter the test dir
      (cond
       ;; ((and launcher hosts) ;; must be using ssh hostname
       ;;    (set! fullcmd (append launcher (car hosts)(list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (car hosts)(list remote-megatest test-sig "-execute" cmdparms))))
       (launcher
	(set! fullcmd (append launcher (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param)))
       ;; (set! fullcmd (append launcher (list remote-megatest test-sig "-execute" cmdparms))))
       (else
	(if (not useshell)(debug:print 0 *default-log-port* "WARNING: internal launching will not work well without \"useshell yes\" in your [jobtools] section"))
	(set! fullcmd (append (list remote-megatest "-m" test-sig "-execute" cmdparms) debug-param (list (if useshell "&" ""))))))
      ;; (set! fullcmd (list remote-megatest test-sig "-execute" cmdparms (if useshell "&" "")))))
      (if (args:get-arg "-xterm")(set! fullcmd (append fullcmd (list "-xterm"))))
      (debug:print 1 *default-log-port* "Launching " work-area)
      ;; set pre-launch-env-vars before launching, keep the vars in prevvals and put the envionment back when done
      (debug:print 4 *default-log-port* "fullcmd: " fullcmd)
      (BB> "lt - set *last-launch*")
      (set! *last-launch* (current-seconds)) ;; all that junk above takes time, set this as late as possible.
      (BB> "lt - BEFORE LAUNCHER")

      (let* ((commonprevvals (alist->env-vars
			      (hash-table-ref/default *configdat* "env-override" '())))
	     (miscprevvals   (alist->env-vars ;; consolidate this code with the code in megatest.scm for "-execute"
			      (append (list (list "MT_TEST_RUN_DIR" work-area)
					    (list "MT_TEST_NAME" test-name)
					    (list "MT_ITEM_INFO" (conc itemdat)) 
					    (list "MT_RUNNAME"   runname)
					    (list "MT_TARGET"    mt_target)
					    (list "MT_ITEMPATH"  item-path)
					    )
				      itemdat)))
	     (testprevvals   (alist->env-vars
			      (hash-table-ref/default tconfig "pre-launch-env-overrides" '())))
	     ;; Launchwait defaults to true, must override it to turn off wait
	     (launchwait     (if (equal? (configf:lookup *configdat* "setup" "launchwait") "no") #f #t))
	     (launch-results
              (BBprofile-thunk "launchcmd" (lambda ()
                                             (apply (if launchwait ;; BB: TODO: refactor this to examine return code of launcher, if nonzero, set state to launch failed.
                                                        process:cmd-run-with-stderr->list
                                                        process-run)
                                                    (if useshell
                                                        (let ((cmdstr (string-intersperse fullcmd " ")))
                                                          (if launchwait
                                                              cmdstr
                                                              (conc cmdstr " >> mt_launch.log 2>&1 &")))
                                                        (car fullcmd))
                                                    (if useshell
                                                        '()
                                                        (cdr fullcmd)))
                                             ))
              ))
        (BB> "lt - AFTER LAUNCHER launchwait="launchwait" useshell="useshell" fullcmd="fullcmd)
        (mutex-unlock! *launch-setup-mutex*) ;; yes, really should mutex all the way to here. Need to put this entire process into a fork.
	;; (rmt:no-sync-del! lock-key)         ;; release the lock for starting this test
	(if (not launchwait) ;; give the OS a little time to allow the process to start
	    (thread-sleep! 0.01))
	(with-output-to-file "mt_launch.log"
	  (lambda ()
	    (print "LAUNCHCMD: " (string-intersperse fullcmd " "))

      ;; well, first lets see if cpu load throttling is enabled. If so wait around until the
      ;; average cpu load is under the threshold before continuing
      (if maxload ;; only gate if maxload is specified
          (common:wait-for-cpuload maxload numcpus waitdelay))
      (if maxhomehostload
          (common:wait-for-homehost-load maxhomehostload (conc "Waiting for homehost load to drop below normalized value of " maxhomehostload)))
      
      (BBprofile run:test run-id run-info keyvals runname test-record flags #f test-registry all-tests-registry)
      (runs:incremental-print-results run-id)
      (hash-table-set! test-registry (db:test-make-full-name test-name item-path) 'running)
      (runs:shrink-can-run-more-tests-count runsdat)  ;; DELAY TWEAKER (still needed?)
      ;; (thread-sleep! *global-delta*)
      (if (or (not (null? tal))(not (null? reg)))
	  (runs:loop-values tal reg reglen regfull reruns)
	  #f))

	     (conc t)
	     (conc (db:test-get-testname t) ":" (db:test-get-state t) "/" (db:test-get-status t))))
       lst))











;; parent-test is there as a placeholder for when parent-tests can be run as a setup step
;;
(define (run:test run-id run-info keyvals runname test-record flags parent-test test-registry all-tests-registry)
  ;; all-tests-registry - used to determine test path
  ;; All these vars might be referenced by the testconfig file reader
  ;; flags are a hash of k/v pairs that could become commandline switches to a standalone version

			     (> numseconds time-since-last))
			 (set! skip-test (conc "Skipping due to previous test run less than " (configf:lookup test-conf "skip" "rundelay") " ago"))))))
		 
		 (if skip-test
		     (begin
		       (mt:test-set-state-status-by-id run-id test-id "COMPLETED" "SKIP" skip-test)
		       (debug:print-info 1 *default-log-port* "SKIPPING Test " full-test-name " due to " skip-test))
		     (if (not (BBprofile launch-test test-id run-id run-info keyvals runname test-conf test-name test-path itemdat flags)) ;; HERE WE GO
			 (begin
			   (print "ERROR: Failed to launch the test. Exiting as soon as possible")
			   (set! *globalexitstatus* 1) ;; 
			   (process-signal (current-process-id) signal/kill))))))))
	((KILLED) 
	 (debug:print 1 *default-log-port* "NOTE: " full-test-name " is already running or was explictly killed, use -force to launch it.")
	 (hash-table-set! test-registry (db:test-make-full-name test-name test-path) 'DONOTRUN)) ;; KILLED))