Megatest

	db
	"SELECT state,status,count(id) AS count FROM tests WHERE run_id=? AND NOT(uname='n/a' AND item_path='') GROUP BY state,status;"
	run-id))))

;; Update run_stats for given run_id
;; input data is a list (state status count)
;;
(define (db:update-run-stats dbstruct run-id stats-in)
  (let* ((stats (if (list? stats-in)
		    stats-in
		    (db:get-raw-run-stats dbstruct run-id))))
    (mutex-lock! *db-transaction-mutex*)
    (db:with-db
     dbstruct
     #f
     #t
     (lambda (dbdat db)
       ;; remove previous data
       
       (let* ((stmt1 (sqlite3:prepare db "DELETE FROM run_stats WHERE run_id=? AND state=? AND status=?;"))
	      (stmt2 (sqlite3:prepare db "INSERT INTO run_stats (run_id,state,status,count) VALUES (?,?,?,?);"))
	      (res
	       (sqlite3:with-transaction
		db
		(lambda ()
		  (for-each
		   (lambda (dat)
		     (sqlite3:execute stmt1 run-id (car dat)(cadr dat))
		     (apply sqlite3:execute stmt2 run-id dat))
		   stats)))))
	 (sqlite3:finalize! stmt1)
	 (sqlite3:finalize! stmt2)
	 (mutex-unlock! *db-transaction-mutex*)
	 res)))))

(define (db:get-main-run-stats dbstruct run-id)
  (db:with-db
   dbstruct
   #f ;; this data comes from main
   #f
   (lambda (dbdat db)

                                   (delta (abs (- df disk-free))))
                              (if (and (> df 0)
                                       (> (/ delta df) 0.1)) ;; (> delta 200) ;; ignore changes under 200 Meg
                                  df
                                  #f)))
             (do-sync       (or new-cpu-load new-disk-free over-time))

	     ;;
	     ;; MOVE THIS TO A FILE FLAG BASED APPROACH (FOR NOW)
	     ;;
	     
             ;; (test-info   (rmt:get-test-state-status-by-id run-id test-id))
             ;; (state       (car test-info));; (db:test-get-state test-info))
             ;; (status      (cdr test-info));; (db:test-get-status test-info))
	     (killreq     (file-exists? (conc work-area"/kill-test"))) ;; (equal? state "KILLREQ"))
             (kill-reason  "no kill reason specified")
             (kill-job?    #f))
        ;; (common:telemetry-log "zombie" (conc "launch:monitor-job - decision time encountered at "(current-seconds)" with last-sync="last-sync" do-sync="do-sync" over-time="over-time" update-period="update-period))
        (cond
         (killreq
          (set! kill-reason "KILLING TEST since received kill request (KILLREQ)")
          (set! kill-job? #t))
         ((and runtlim (> (- (current-seconds) start-seconds) runtlim))
          (set! kill-reason (conc "KILLING TEST DUE TO TIME LIMIT EXCEEDED! Runtime=" (- (current-seconds) start-seconds) " seconds, limit=" runtlim))
          (set! kill-job? #t))
         #;((equal? status "DEAD") ;; NEED ALTERNATIVE MECHANISM FOR THIS.
          (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)
          (rmt:set-state-status-and-roll-up-items run-id test-id 'foo "RUNNING" "n/a" "was marked dead; really still running.")
          ;;(set! kill-reason "KILLING TEST because it was marked as DEAD by launch:handle-zombie-tests (might indicate really overloaded server or else overzealous setup.deadtime)") ;; MARK RUNNING
          (set! kill-job? #f)))

        (debug:print 4 *default-log-port* "cpu: " new-cpu-load " disk: " new-disk-free " last-sync: " last-sync " do-sync: " do-sync)

	;; revisit logic in zombie handling.
	;;
        (if (common:low-noise-print 600 "run zombie") ;; every five minutes is plenty
	    (launch:handle-zombie-tests run-id))
	
        (when do-sync
          ;; (tests:update-central-meta-info run-id test-id new-cpu-load new-disk-free (calc-minutes) #f #f)

	  (let ((oup (open-output-file (conc work-area"/.run-logging-stats.csv") :append))
		(csv (conc run-id","test-id","new-cpu-load","new-disk-free","(calc-minutes))))
	    (debug:print 0 *default-log-port* "Updating run log, csv="csv)
	    (with-output-to-port oup
	      (lambda ()
		(print csv)))
	    (close-output-port oup)))
        
	(if kill-job? 
	    (begin
              (debug:print-info 0 *default-log-port* "proceeding to kill test: "kill-reason)
	      (mutex-lock! m)
	      ;; NOTE: The pid can change as different steps are run. Do we need handshaking between this
	      ;;       section and the runit section? Or add a loop that tries three times with a 1/4 second

                                      runscript ;; use unadultered if contains slashes
                                      (let ((fulln (conc work-area "/" runscript)))
	                                  (if (and (common:file-exists? fulln)
                                                   (file-execute-access? fulln))
                                              fulln
                                              runscript))))) ;; assume it is on the path
               (check-work-area           (lambda ()
					    ;;
                                            ;; NFS might not have propagated the
                                            ;; directory meta data to the run host - give it
                                            ;; time if needed
					    ;;
					    ;; alternatively - if nonfs is set, find a working
					    ;; directory using [host-disks] and copy from
					    ;; the homehost using rsync
					    ;;
                                            (let loop ((count 0))
                                              (if (or (common:directory-exists? work-area)
                                                      (> count 10))
                                                  (change-directory work-area)
                                                  (begin
                                                    (debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " work-area " not found")
                                                    (thread-sleep! 10)
                                                    (loop (+ count 1)))))

                                            (if (not (string=?  (common:real-path work-area)(common:real-path (current-directory))))
                                                (begin
                                                  (debug:print 0 *default-log-port*
                                                               "INFO: we are expecting to be in directory " work-area "\n"
                                                               "     but we are actually in the directory " (current-directory) "\n"
                                                               "     doing another change dir.")
                                                  (change-directory work-area)))
                                            
                                            ;; spot check that the files in testpath are available.
					    ;; Too often NFS delays cause problems here.
					    
                                            (let ((files      (glob (conc testpath "/*")))
                                                  (bad-files '()))
                                              (for-each
                                               (lambda (fullname)
                                                 (let* ((fname (pathname-strip-directory fullname))
                                                        (targn (conc work-area "/" fname)))
                                                   (if (not (file-exists? targn))

	  (debug:print 2 *default-log-port* "Executing " test-name " (id: " test-id ") on " (get-host-name))
	  (set! keys       (rmt:get-keys))
	  ;; (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals) ;; these may be needed by the launching process
	  ;; one of these is defunct/redundant ...
	  (if (not (launch:setup force-reread: #t))
	      (begin
		(debug:print 0 *default-log-port* "Failed to setup, exiting") 


		(exit 1)))
          ;; validate that the test run area is available
          (check-work-area)
          
          ;; still need to go back to run area home for next couple steps
	  (change-directory *toppath*) 

	  ;; NOTE: Current order is to process runconfigs *before* setting the MT_ vars. This 
	  ;;       seems non-ideal but could well break stuff
	  ;;    BUG? BUG? BUG?

	  ;; CHANGE THIS: Do NOT read the runconfigs again - ONLY use the cached version
	  
	  (let ((rconfig (full-runconfigs-read)) ;; (read-config (conc  *toppath* "/runconfigs.config") #f #t sections: (list "default" target))))
		(wconfig (read-config "waivers.config" #f #t sections: `( "default" ,target )))) ;; read the waivers config if it exists


	    ;; Now have runconfigs data loaded, set environment vars
	    (for-each
	     (lambda (section)
	       (for-each
		(lambda (varval)
		  (let ((var (car varval))
			(val (cadr varval)))
		    (if (and (string? var)(string? val))
			(begin
			  (safe-setenv var (configf:eval-string-in-environment val))) ;; val)
			(debug:print-error 0 *default-log-port* "bad variable spec, " var "=" val))))
		(configf:get-section rconfig section)))
	     (list "default" target)))


	  ;; NFS might not have propagated the directory meta data to the run host - give it time if needed
	  (let loop ((count 0))
	    (if (or (common:file-exists? work-area)
		    (> count 10))
		(change-directory work-area)
		(begin
		  (debug:print 0 *default-log-port* "INFO: Not starting job yet - directory " work-area " not found")
		  (thread-sleep! 10)
		  (loop (+ count 1)))))

          ;; now we can switch to the work-area?
          (change-directory work-area)


	  (set! keyvals    (keys:target->keyval keys target))
	  ;; apply pre-overrides before other variables. The pre-override vars must not
	  ;; clobber things from the official sources such as megatest.config and runconfigs.config
	  (if (string? set-vars)
	      (let ((varpairs (string-split set-vars ",")))
		(debug:print 4 *default-log-port* "varpairs: " varpairs)
		(map (lambda (varpair)
		       (let ((varval (string-split varpair "=")))
			 (if (eq? (length varval) 2)
			     (let ((var (car varval))
				   (val (cadr varval)))
			       (debug:print 1 *default-log-port* "Adding pre-var/val " var " = " val " to the environment")
			       (setenv var val)))))
		     varpairs)))

	  (for-each
	   (lambda (varval)
	     (let ((var (car varval))
		   (val (cadr varval)))
	       (if val
		   (setenv var val)
		   (begin
		     (debug:print-error 0 *default-log-port* "required variable " var " does not have a valid value. Exiting")
		     (exit)))))
	     (list 
	      (list  "MT_TEST_RUN_DIR" work-area)
	      (list  "MT_TEST_NAME" test-name)
	      (list  "MT_ITEM_INFO" (conc itemdat))
	      (list  "MT_ITEMPATH"  item-path)
	      (list  "MT_RUNNAME"   runname)
	      (list  "MT_MEGATEST"  megatest)
	      (list  "MT_TARGET"    target)
	      (list  "MT_LINKTREE"  (common:get-linktree))
	      (list  "MT_TESTSUITENAME" (common:get-testsuite-name))))


	  (let ((tmppath (getenv "PATH")))
	    (if (string-search tmppath " ")
		(debug:print 0 *default-log-port* "WARNING: spaces in PATH are not supported."))
	    (if mt-bindir-path (setenv "PATH" (conc tmppath":"mt-bindir-path))))





	  ;; environment overrides are done *before* the remaining critical envars.
	  (alist->env-vars env-ovrd)

	  (runs:set-megatest-env-vars run-id inkeys: keys inkeyvals: keyvals)

	  (set-item-env-vars itemdat)

          (let ((blacklist (configf:lookup *configdat* "setup" "blacklistvars")))
            (if blacklist
		(let ((vars (string-split blacklist)))
		  (save-environment-as-files "megatest" ignorevars: vars)
		  (for-each (lambda (var)
			      (unsetenv var))
			    vars))
                (save-environment-as-files "megatest")))




	  (tests:set-full-meta-info #f test-id run-id 0 work-area 10)



	  (if (args:get-arg "-xterm")
	      (set! fullrunscript "xterm")
	      (if (and fullrunscript 
		       (common:file-exists? fullrunscript)
		       (not (file-execute-access? fullrunscript)))
		  (system (conc "chmod ug+x " fullrunscript))))
	  (launch:extract-scripts-logpro work-area test-name item-path tconfigreg)






























	  (let* ((m            (make-mutex))
		 (kill-job?    #f)
		 (exit-info    (make-launch:einf pid: #t exit-status: #t exit-code: #t rollup-status: 0)) ;; pid exit-status exit-code (i.e. process was successfully run) rollup-status
		 (job-thread   #f)
		 ;; (keep-going   #t)
		 (misc-flags   (let ((ht (make-hash-table)))
				 (hash-table-set! ht 'keep-going #t)

	    (thread-start! th1)
	    (thread-start! th2)
	    (thread-join! th2)
	    (debug:print-info 0 *default-log-port* "Megatest execute of test " test-name ", item path " item-path " complete. Notifying the db ...")
            (debug:print-info 2 *default-log-port* "exit-info = " exit-info)
	    (hash-table-set! misc-flags 'keep-going #f)
	    (thread-join! th1)
	    (thread-sleep! 1)       ;; give thread th1 a chance to be done TODO: Verify this is needed. At 0.1 I was getting fail to stop, increased to total of 1.1 sec.
	    (mutex-lock! m)
	    (let* ((item-path (item-list->path itemdat))

		   ;; REMOVE this call and change this section to get killrequest from disk file
		   ;; FUTURE: the test will start a tcp server to listen for kill requests
		   
		   ;; only state and status needed - use lazy routine
		   (testinfo  (rmt:get-testinfo-state-status run-id test-id)))
	      
	      ;; Am I completed?
	      (if (member (db:test-get-state testinfo) '("REMOTEHOSTSTART" "RUNNING"))
                 (let ((new-state  (if kill-job? "KILLED" "COMPLETED"))
		        (new-status (cond
				     ((not (launch:einf-exit-status exit-info)) "FAIL") ;; job failed to run ... (vector-ref exit-info 1)
				     ((eq? (launch:einf-rollup-status exit-info) 0)     ;; (vector-ref exit-info 3)
				      ;; if the current status is AUTO then defer to the calculated value (i.e. leave this AUTO)
				      (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO" "PASS"))
				     ((eq? (launch:einf-rollup-status exit-info) 1) "FAIL")  ;; (vector-ref exit-info 3)
				     ((eq? (launch:einf-rollup-status exit-info) 2)	     ;;	(vector-ref exit-info 3)

				      ;; if the current status is AUTO the defer to the calculated value but
				      ;; qualify (i.e. make this AUTO-WARN)
				      
				      (if (equal? (db:test-get-status testinfo) "AUTO") "AUTO-WARN" "WARN"))
				     ((eq? (launch:einf-rollup-status exit-info) 3) "CHECK")
				     ((eq? (launch:einf-rollup-status exit-info) 4) "WAIVED")
				     ((eq? (launch:einf-rollup-status exit-info) 5) "ABORT")
				     ((eq? (launch:einf-rollup-status exit-info) 6) "SKIP")
				     (else "FAIL"))))

		    (debug:print-info 0 *default-log-port* "Test exited in state=" (db:test-get-state testinfo) ", setting state/status based on exit code of " (launch:einf-exit-status exit-info) " and rollup-status of " (launch:einf-rollup-status exit-info))
   
                    ;; Leave a .final-status file for each sub-test
                    (tests:save-final-status run-id test-id)

		    (tests:test-set-status! run-id 
					    test-id 
					    new-state
					    new-status
					    (args:get-arg "-m") #f)))






	      ;; for automated creation of the rollup html file this is a good place...
	      (if (not (equal? item-path ""))
		  (tests:summarize-items run-id test-id test-name #f))
	      ;; BUG was this meant to be the antecedent of the if above?

	      (tests:summarize-test run-id test-id)  ;; don't force - just update if no
              ;; Leave a .final-status file for the top level test
              (tests:save-final-status run-id test-id)

	      ;; WHAT IS THIS FOR? TWO CALLS BACK TO SERVER?
	      (rmt:update-run-stats run-id 'run)) ;; (rmt:get-raw-run-stats run-id))) ;; end of let*

	    (mutex-unlock! m)
            (launch:end-of-run-check run-id )
	    (debug:print 2 *default-log-port* "Output from running " fullrunscript ", pid " (launch:einf-pid exit-info) " in work area " 
			 work-area ":\n====\n exit code " (launch:einf-exit-code exit-info) "\n" "====\n")

	    (let* ((testrec  (rmt:get-testinfo-state-status run-id test-id)))
              (set! test-status (db:test-get-status testrec))
	      (set! test-state  (db:test-get-state  testrec)))

            ;; If the propagate-exit-code option has been set in the megatest config
	    ;; and the test status matches the list, set the exit code to 1.

            (if (and propagate-exit-code (string=? propagate-exit-code "yes") (member test-status propagate-status-list))
               (begin
                (debug:print 1 *default-log-port* "Setting exit status to 1 because of test status of " test-status) 
                (set! *globalexitstatus* 1)))



	    (if postcmd
		(begin
		  (setenv "MT_TEST_STATE" test-state)
		  (setenv "MT_TEST_STATUS" test-status)
		  ;; (save-environment-as-files "postcmd-envt")
		  (system postcmd)))

                                            (debug:print 2 *default-log-port* "Has target: " (tests:glob-like-match (conc "%/" target "/%") rundir))
                                            (debug:print 2 *default-log-port* "Target: " target)

                                            ;;PJH remove record from db no need to cleanup directory
                                            (case mode
                                               ((remove-data-only)(mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) (db:test-get-state test)(db:test-get-status test) #f))
                                               ((archive-remove)  (mt:test-set-state-status-by-id (db:test-get-run_id test)(db:test-get-id test) "ARCHIVED" #f #f))
                                               (else (rmt:delete-test-records (db:test-get-run_id test) (db:test-get-id test)))))))





                                      (if (not (null? tal))
                                         (loop (car tal)(cdr tal)))))))
				(rmt:update-run-stats run-id 'run)) ;; (rmt:get-raw-run-stats run-id)))
                               ((kill-runs)
                                ;; RUNNING -> KILLREQ
                                ;; LAUNCHED,RUNNING,REMOTEHOSTSTART -> NOT STARTED
                                (cond
                                 ((and has-subrun (member test-state (list "RUNNING" "LAUNCHED" "REMOTEHOSTSTART" "KILLREQ")))
                                  (common:send-thunk-to-background-thread
                                   (lambda ()

cleanup :
	killall mtest dboard -v -9 || true
	rm -rf *.log *.bak NB* logs/* .meta .db /tmp/$(USER)/megatest_localdb/simplerun ../simpleruns/* lt

Super simple test system - useful for testing db access.

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

[fields]
SYSTEM TEXT
RELEASE TEXT

[setup]
# Adjust max_concurrent_jobs to limit how much you load your machines
max_concurrent_jobs 50

[server]
timeout 3
# 3600

# Uncomment this to make the in-mem db into a disk based db (slower but good for debug)
# be aware that some unit tests will fail with this due to persistent data
#
# tmpdb /tmp

# This is your link path, you can move it but it is generally better to keep it stable
linktree #{getenv MT_RUN_AREA_HOME}/../simplelinks

# Valid values for state and status for steps, NB// It is not recommended you use this
[validvalues]
state start end completed

# Job tools are more advanced ways to control how your jobs are launched
[jobtools]
# useshell yes
launcher nbfake

# You can override environment variables for all your tests here
[env-override]
EXAMPLE_VAR example value

# As you run more tests you may need to add additional disks, the names are arbitrary but must be unique
[disks]
disk0 #{getenv MT_RUN_AREA_HOME}/../simpleruns

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

[default]
ALLTESTS see this variable
!GLOBAL_WAITONS runfirst

# Your variables here are grouped by targets [SYSTEM/RELEASE]
[SYSTEM_val/RELEASE_val]
ANOTHERVAR only defined if target is SYSTEM_val/RELEASE_val

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

[section1]
1 ./blah

[section2]

# A comment

[disks]
1 ./

[validvalues]
state start end aborted
status pass fail n/a

[include a file that doesn't exist]


blah nada

# now inlcude a file tha tdoes exist
[include megatest.config]

[metadata]
description This is a multiline 
  description. The leading whitespace is discarded
  irrespective of amount of indenting.
     This line is indented more.
 

author matt
lastreview never

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

# Add additional steps here. Format is "stepname script"
[ezsteps]
step1 step1.sh
step2 step2.sh

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
[items]
PARTOFDAY morning noon afternoon evening night

[scripts]
step1.sh #!/bin/bash
  sleep 1

step2.sh #!/bin/bash
  sleep 2

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

# Add additional steps here. Format is "stepname script"
[ezsteps]
createsteps createsteps.sh

[scripts]
createsteps.sh #!/bin/bash
  (for x in $(seq 20);do
    echo "step$x sleep $x" 
   done) > #{getenv MT_RUN_AREA_HOME}/steps.config

[logpro]
  (expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
  (expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
  (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

# Test requirements are specified here
[requirements]
# waiton setup
priority 0

# Iteration for your tests are controlled by the items section
# [items]
# PARTOFDAY morning noon afternoon evening night

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description An example test
tags tagone,tagtwo
reviewed never

#  Copyright 2006-2017, Matthew Welland.
# 
# This file is part of Megatest.
# 
#     Megatest is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 3 of the License, or
#     (at your option) any later version.
# 
#     Megatest is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
# 
#     You should have received a copy of the GNU General Public License
#     along with Megatest.  If not, see <http://www.gnu.org/licenses/>.

# Add additional steps here. Format is "stepname script"
[ezsteps]
[include #{getenv MT_RUN_AREA_HOME}/steps.config]

# Test requirements are specified here
[requirements]
waiton test1
priority 0

# Iteration for your tests are controlled by the items section
[items]
LANDTYPE desert

[logpro]
  (expect:ignore   in "LogFileBody"  < 99 "Ignore the word error in comments" #/^\/\/.*error/)
  (expect:warning  in "LogFileBody"  = 0 "Any warning" #/warn/)
  (expect:error    in "LogFileBody"  = 0 "Any error"  (list #/ERROR/ #/error/)) ;; but disallow any other errors

# test_meta is a section for storing additional data on your test
[test_meta]
author matt
owner  matt
description Yet another example test
tags tagone,tagtwo,quick
reviewed never

#!/bin/bash

export PATH="$PWD/../../bin:$PATH"

exec "$@"