Megatest

    exn
    (begin
      (debug:print 0 "ERROR: received bad encoded string \"" instr "\", message: " ((condition-property-accessor 'exn 'message) exn))
      (print-call-chain (current-error-port))
      #f)
    (read (open-input-string (base64:base64-decode instr))))
   (read (open-input-string (z3:decode-buffer (base64:base64-decode instr))))))

;; dot-locking egg seems not to work, using this for now
;; if lock is older than expire-time then remove it and try again
;; to get the lock
;;
(define (common:simple-file-lock fname #!key (expire-time 300))
  (if (file-exists? fname)
      (if (> (- (current-seconds)(file-modification-time fname)) expire-time)
	  (begin
	    (delete-file* fname)
	    (common:simple-file-lock fname expire-time: expire-time))
	  #f)
      (let ((key-string (conc (get-host-name) "-" (current-process-id))))
	(with-output-to-file fname
	  (lambda ()
	    (print key-string)))
	(thread-sleep! 0.25)
	(with-input-from-file fname
	  (lambda ()
	    (equal? key-string (read-line)))))))
	
(define (common:simple-file-release-lock fname)
  (delete-file* fname))

;;======================================================================
;; S T A T E S   A N D   S T A T U S E S
;;======================================================================

(define *common:std-states*   
  '((0 "COMPLETED")

;;======================================================================
;;
;;======================================================================
(define (examine-test run-id test-id) ;; run-id run-key origtest)
  (let* ((db-path       (db:dbfile-path run-id)) ;; (conc (configf:lookup *configdat* "setup" "linktree") "/db/" run-id ".db"))
	 (dbstruct      (make-dbr:dbstruct path:  (db:dbfile-path #f) ;; (configf:lookup *configdat* "setup" "linktree") 
					   local: #t))
	 (testdat       (db:get-test-info-by-id dbstruct run-id test-id))
	 (db-mod-time   0) ;; (file-modification-time db-path))
	 (last-update   0) ;; (current-seconds))
	 (request-update #t))
    (if (not testdat)
	(begin
	  (debug:print 2 "ERROR: No test data found for test " test-id ", exiting")

      (exit)))

(if (not (launch:setup-for-run))
    (begin
      (print "Failed to find megatest.config, exiting") 
      (exit 1)))

(define *dbdir* (db:dbfile-path #f)) ;; (conc (configf:lookup *configdat* "setup" "linktree") "/.db"))
(define *dbstruct-local*  (make-dbr:dbstruct path:  *dbdir*
					     local: #t))
(define *db-file-path* (db:dbfile-path 0))

;; HACK ALERT: this is a hack, please fix.
(define *read-only* (not (file-read-access? *db-file-path*)))

;; 
;; ;; Use to get a path. To get an arbitrary string see next define
;; ;;
;; (define (db:get-path dbstruct id)
;;   (let ((fdb (db:get-filedb dbstruct)))
;;     (filedb:get-path db id)))

;; NB// #f => return dbdir only
;;      (was planned to be;  zeroth db with name=main.db)
;;
(define (db:dbfile-path run-id)
  (let* (;; (toppath      (dbr:dbstruct-get-path  dbstruct))
	 (link-tree-path  (configf:lookup *configdat* "setup" "linktree"))
	 (dbpath          (configf:lookup *configdat* "setup" "dbdir"))
	 (fname           (if run-id
			      (if (eq? run-id 0) "main.db" (conc run-id ".db"))
			      #f))
	 (dbdir           (if dbpath
			      dbpath
			      (conc link-tree-path "/.db/"))))
    (handle-exceptions
     exn
     (begin
       (debug:print 0 "ERROR: Couldn't create path to " dbdir)
       (exit 1))
     (if (not (directory? dbdir))(create-directory dbdir #t)))
    (if fname
	(conc dbdir fname)
	dbdir)))
	       
(define (db:set-sync db)
  (let ((syncprag (configf:lookup *configdat* "setup" "sychronous")))
    (sqlite3:execute db (conc "PRAGMA synchronous = " (or syncprag 1) ";"))))

;; open an sql database inside a file lock
;;

	  (dbr:dbstruct-set-main!   dbstruct dbdat)
	  (dbr:dbstruct-set-olddb!  dbstruct olddb) ;; olddb is already a (cons db path)
	  dbdat))))

;; Make the dbstruct, setup up auxillary db's and call for main db at least once
;;
(define (db:setup run-id #!key (local #f))
  (let* ((dbdir    (db:dbfile-path #f)) ;; (conc (configf:lookup *configdat* "setup" "linktree") "/.db"))
	 (dbstruct (make-dbr:dbstruct path: dbdir local: local)))
    dbstruct))

;; Open the classic megatest.db file in toppath
;;
(define (db:open-megatest-db)
  (let* ((dbpath       (conc *toppath* "/megatest.db"))

					    new-state
					    new-status
					    (args:get-arg "-m") #f)
		    ;; need to update the top test record if PASS or FAIL and this is a subtest
		    ;; NO NEED TO CALL roll-up-pass-fail-counts HERE, THIS IS DONE IN roll-up-pass-fail-counts called by tests:test-set-status!
		    ))
	      ;; for automated creation of the rollup html file this is a good place...
	      ;; (if (and (not (equal? item-path ""))
	      ;;      (< (random (rmt:get-count-tests-running-for-testname run-id test-name)) 5))
	      (tests:summarize-items run-id test-id test-name #f)
	      (tests:summarize-test run-id test-id)) ;; don't force - just update if no
	    (mutex-unlock! m)
	    (debug:print 2 "Output from running " fullrunscript ", pid " (vector-ref exit-info 0) " in work area " 
			 work-area ":\n====\n exit code " (vector-ref exit-info 2) "\n" "====\n")
	    (if (not (vector-ref exit-info 1))
		(exit 4)))))))

	 (db        (lock-queue:db-dat-get-db dbdat))
	 (lckqry    (sqlite3:prepare db "SELECT test_id,run_lock FROM runlocks WHERE run_lock='locked';"))
	 (mklckqry  (sqlite3:prepare db "INSERT INTO runlocks (test_id,run_lock) VALUES (?,'locked');")))
    (let ((result 
	   (handle-exceptions
	    exn
	    (begin
	      (debug:print 0 "WARNING: failed to get queue lock. Removing lock db and returning fail") ;; Will try again in a few seconds")
	      (debug:print 0 " message: " ((condition-property-accessor 'exn 'message) exn))
	      (thread-sleep! 10)
	      ;; (if (> count 0)	
	      ;;  #f ;; (lock-queue:get-lock dbdat test-id count: (- count 1)) - give up on retries 
	      ;; (begin ;; never recovered, remote the lock file and return #f, no lock obtained
	      (lock-queue:delete-lock-db dbdat)
	      #f)
	    (sqlite3:with-transaction
	     db
	     (lambda ()
	       (sqlite3:for-each-row (lambda (tid lockstate)
				       (set! res (list tid lockstate)))
				     lckqry)
	       (if res

;;     (client:launch))

;; ease debugging by loading ~/.dashboardrc
(let ((debugcontrolf (conc (get-environment-variable "HOME") "/.dashboardrc")))
  (if (file-exists? debugcontrolf)
      (load debugcontrolf)))

(define *dbdir* (db:dbfile-path #f)) ;; (conc (configf:lookup *configdat* "setup" "linktree") "/.db"))
(define *dbstruct-local*  (make-dbr:dbstruct path:  *dbdir*
					     local: #t))
(define *db-file-path* (db:dbfile-path 0))

;; HACK ALERT: this is a hack, please fix.
(define *read-only* (not (file-read-access? *db-file-path*)))

			     (loop (car tal)(cdr tal) newmax-cmd currmax)))))))
    (mutex-unlock! *db-stats-mutex*)
    res))
	  
(define (rmt:open-qry-close-locally cmd run-id params #!key (remretries 5))
  (let* ((dbstruct-local (if *dbstruct-db*
			     *dbstruct-db*
			     (let* ((dbdir (db:dbfile-path #f)) ;;  (conc    (configf:lookup *configdat* "setup" "linktree") "/.db"))
				    (db (make-dbr:dbstruct path:  dbdir local: #t)))
			       (set! *dbstruct-db* db)
			       db)))
	 (db-file-path   (db:dbfile-path 0))
	 ;; (read-only      (not (file-read-access? db-file-path)))
	 (start          (current-milliseconds))
	 (resdat         (api:execute-requests dbstruct-local (vector (symbol->string cmd) params)))

    res))

;; 
(define (tasks:start-monitor db mdb)
  (if (> (tasks:get-num-alive-monitors mdb) 2) ;; have two running, no need for more
      (debug:print-info 1 "Not starting monitor, already have more than two running")
      (let* ((megatestdb     (conc *toppath* "/megatest.db"))
	     (monitordbf     (conc (db:dbfile-path #f) "/monitor.db"))
	     (last-db-update 0)) ;; (file-modification-time megatestdb)))
	(task:register-monitor mdb)
	(let loop ((count      0)
		   (next-touch 0)) ;; next-touch is the time where we need to update last_update
	  ;; if the db has been modified we'd best look at the task queue
	  (let ((modtime (file-modification-time megatestdbpath )))
	    (if (> modtime last-db-update)

;; Create the sqlite db for the individual test(s)
(define (open-test-db work-area) 
  (debug:print-info 11 "open-test-db " work-area)
  (if (and work-area 
	   (directory? work-area)
	   (file-read-access? work-area))
      (let* ((dbpath              (conc work-area "/testdat.db"))
	     (dbexists            (file-exists? dbpath))
	     (work-area-writeable (file-write-access? work-area))




	     (db                  (handle-exceptions  ;; open the db if area writeable or db pre-existing. open in-mem otherwise. if exception, open in-mem
				   exn
				   (begin
				     (print-call-chain (current-error-port))
				     (debug:print 2 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test"
						  ((condition-property-accessor 'exn 'message) exn))
				     (set! dbexists #f) ;; must force re-creation of tables, more tom-foolery
				     (sqlite3:open-database ":memory:")) ;; open an in-memory db to allow readonly access 
				   (if (or work-area-writeable
					   dbexists)
				       (sqlite3:open-database dbpath)
				       (sqlite3:open-database ":memory:"))))
	     (tdb-writeable       (and (file-write-access? work-area)
				       (file-write-access? dbpath)))
	     (handler   (make-busy-timeout (if (args:get-arg "-override-timeout")
					       (string->number (args:get-arg "-override-timeout"))
					       136000))))
	
	(if (and tdb-writeable
		 *db-write-access*)
	    (sqlite3:set-busy-handler! db handler))
	(if (not dbexists)
	    (begin
	      (db:set-sync db) ;; (sqlite3:execute db "PRAGMA synchronous = FULL;")
	      (debug:print-info 11 "Initialized test database " dbpath)
	      (tdb:testdb-initialize db)))
	;; (sqlite3:execute db "PRAGMA synchronous = 0;")
	(debug:print-info 11 "open-test-db END (sucessful)" work-area)
	;; now let's test that everything is correct
	(handle-exceptions
	 exn
	 (begin
	   (print-call-chain (current-error-port))
	   (debug:print 0 "ERROR: problem accessing test db " work-area ", you probably should clean and re-run this test or remove the file " 
			dbpath ".\n  "
			((condition-property-accessor 'exn 'message) exn))
	   #f)
	 ;; Is there a cheaper single line operation that will check for existance of a table
	 ;; and raise an exception ?
	 (sqlite3:execute db "SELECT id FROM test_data LIMIT 1;"))
	db)
      ;; no work-area or not readable - create a placeholder to fake rest of world out
      (let ((baddb (sqlite3:open-database ":memory:")))
 	(debug:print-info 11 "open-test-db END (unsucessful)" work-area)
 	;; provide an in-mem db (this is dangerous!)
 	(tdb:testdb-initialize baddb)
 	baddb)))

;; find and open the testdat.db file for an existing test
(define (tdb:open-test-db-by-test-id test-id #!key (work-area #f))
  (let* ((test-path (if work-area
			work-area
			(rmt:test-get-rundir-from-test-id test-id))))
    (debug:print 3 "TEST PATH: " test-path)

	  (change-directory path))
	;; (set! outputfilename (conc path "/" outputfilename)))
	(debug:print 0 "ERROR: summarize-items for run-id=" run-id ", test-name=" test-name ", no such path: " path))
    (debug:print 4 "summarize-items with logf " logf ", outputfilename " outputfilename " and force " force)
    (if (or (equal? logf "logs/final.log")
	    (equal? logf outputfilename)
	    force)
	(let ((my-start-time (current-seconds))
	      (lockf         (conc outputfilename ".lock")))
	  (let loop ((have-lock  (common:simple-file-lock lockf)))
	    (if have-lock
		(begin
		  (print "Obtained lock for " outputfilename)





































		  (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename)




















		  (common:simple-file-release-lock lockf)







		  (change-directory orig-dir)
		  ;; NB// tests:test-set-toplog! is remote internal...
		  (tests:test-set-toplog! run-id test-name outputfilename))
		;; didn't get the lock, check to see if current update started later than this 
		;; update, if so we can exit without doing any work
		(if (> my-start-time (file-modification-time lockf))
		    ;; we started since current re-gen in flight, delay a little and try again
		    (begin
		      (debug:print-info 1 "Waiting to update " outputfilename ", another test currently updating it")
		      (thread-sleep! (+ 5 (random 5))) ;; delay between 5 and 10 seconds
		      (loop (common:simple-file-lock lockf))))))))))

(define (tests:generate-html-summary-for-iterated-test run-id test-id test-name outputfilename)
  (let ((counts (make-hash-table))
	(statecounts (make-hash-table))
	(outtxt "")
	(tot    0)
	(testdat (rmt:test-get-records-for-index-file run-id test-name)))
    (with-output-to-file outputfilename
      (lambda ()
	(set! outtxt (conc outtxt "<html><title>Summary: " test-name 
			   "</title><body><h2>Summary for " test-name "</h2>"))
	(for-each
	 (lambda (testrecord)
	   (let ((id             (vector-ref testrecord 0))
		 (itempath       (vector-ref testrecord 1))
		 (state          (vector-ref testrecord 2))
		 (status         (vector-ref testrecord 3))
		 (run_duration   (vector-ref testrecord 4))
		 (logf           (vector-ref testrecord 5))
		 (comment        (vector-ref testrecord 6)))
	     (hash-table-set! counts status (+ 1 (hash-table-ref/default counts status 0)))
	     (hash-table-set! statecounts state (+ 1 (hash-table-ref/default statecounts state 0)))
	     (set! outtxt (conc outtxt "<tr>"
				;; "<td><a href=\"" itempath "/" logf "\"> " itempath "</a></td>" 
				"<td><a href=\"" itempath "/test-summary.html\"> " itempath "</a></td>" 
				"<td>" state    "</td>" 
				"<td><font color=" (common:get-color-from-status status)
				">"   status   "</font></td>"
				"<td>" (if (equal? comment "")
					   "&nbsp;"
					   comment) "</td>"
					   "</tr>"))))
	 (if (list? testdat)
	     testdat
	     (begin
	       (print "ERROR: failed to get records with rmt:test-get-records-for-index-file run-id=" run-id "test-name=" test-name)
	       '())))
	
	(print "<table><tr><td valign=\"top\">")
	;; Print out stats for status
	(set! tot 0)
	(print "<table cellspacing=\"0\" border=\"1\"><tr><td colspan=\"2\"><h2>State stats</h2></td></tr>")
	(for-each (lambda (state)
		    (set! tot (+ tot (hash-table-ref statecounts state)))
		    (print "<tr><td>" state "</td><td>" (hash-table-ref statecounts state) "</td></tr>"))
		  (hash-table-keys statecounts))
	(print "<tr><td>Total</td><td>" tot "</td></tr></table>")
	(print "</td><td valign=\"top\">")
	;; Print out stats for state
	(set! tot 0)
	(print "<table cellspacing=\"0\" border=\"1\"><tr><td colspan=\"2\"><h2>Status stats</h2></td></tr>")
	(for-each (lambda (status)
		    (set! tot (+ tot (hash-table-ref counts status)))
		    (print "<tr><td><font color=\"" (common:get-color-from-status status) "\">" status
			   "</font></td><td>" (hash-table-ref counts status) "</td></tr>"))
		  (hash-table-keys counts))
	(print "<tr><td>Total</td><td>" tot "</td></tr></table>")
	(print "</td></td></tr></table>")
	
	(print "<table cellspacing=\"0\" border=\"1\">" 
	       "<tr><td>Item</td><td>State</td><td>Status</td><td>Comment</td>"
	       outtxt "</table></body></html>")
	;; (release-dot-lock outputfilename)
	))))

;; CHECK - WAS THIS ADDED OR REMOVED? MANUAL MERGE WITH API STUFF!!!
;;
;; get a pretty table to summarize steps
;;
;; (define (dcommon:process-steps-table steps);; db test-id #!key (work-area #f))
(define (tests:process-steps-table steps);; db test-id #!key (work-area #f))

[setup]
# Set launchwait to no to use the more agressive code that does not wait for the launch to complete before proceeding
# this may save a few milliseconds on launching tests
# launchwait no
waivercommentpatt ^WW\d+ [a-z].*
incomplete-timeout 1

# set the dbdir, default is linktree
dbdir #{getenv MT_RUN_AREA_HOME}/db/

# wait for runs to completely complete. yes, anything else is no
run-wait yes



# If set to "default" the old code is used. Otherwise defaults to 200 or uses
# numeric value given.
#
runqueue 20

# Default runtimelim 1d 1h 1m 10s

;; Insert data into db
;;
(test #f 1 (rmt:register-run keyvals runname "new" "n/a" user))
;; (test #f #f (rmt:get-runs-by-patt keys runname))
(test #f #t (rmt:general-call 'register-test run-id run-id "test-one" ""))
(define test-one-id #f)
(test #f 30001  (let ((test-id (rmt:get-test-id run-id "test-one" "")))
	      (set! test-one-id test-id)
	      test-id))
(define test-one-rec #f)
(test #f "test-one" (let ((test-rec (rmt:get-test-info-by-id run-id test-one-id)))
		      (set! test-one-rec test-rec)
		      (vector-ref test-rec 2)))